Skip to main content

15.12.2024 | Original Article

Integrating analytical and machine learning methods for investigating nonlinear bending and post-buckling behavior of 3D-printed auxetic tubes

verfasst von: Fatemeh Ghasemi, Erfan Salari, Arshia Salari, Abbas Rastgoo, Deli Li, Jian Deng

Erschienen in: Engineering with Computers

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This study focuses on two primary objectives regarding 3D-printed tubular metastructures. Firstly, it investigates the nonlinear mechanical bending and post-buckling characteristics of re-entrant perfect and imperfect auxetic tubes analytically. To achieve this, von-Kármán nonlinear assumption and Timoshenko theory are employed to establish the governing equations for the auxetic tubes with geometrical imperfection under transverse and axial mechanical loads. The tensile test and the digital image correlation (DIC) method are used to experimentally extract the mechanical properties of polylactic acid (PLA) biopolymer, and scanning electron microscopy (SEM) images are taken to examine factors influencing differences in Young’s modulus and ultimate tensile strength in dogbone specimens. The nonlinear equations are discretized using the Ritz method with Chebyshev polynomials. The validation study is carried out for the auxetic tube and the unit cell’s representative volume element (RVE), utilizing findings from the literature and simulations in the finite element (FE) software Abaqus. In the second part, machine learning-assisted predictions concerning the behavior of this structure under mechanical loads are explored. Five machine learning algorithms, including Categorical Boosting (CatBoost), Random Forest (RF), Gradient Boosting Tree (GBT), Decision Tree (DT), Extreme Gradient Boosting (XGBoost), and an Artificial Neural Network (ANN) model, are developed to predict the nonlinear mechanical bending and post-buckling behavior of the re-entrant auxetic tube based on analytical data. The anticipated outcomes from both machine learning (ML) and ANN models for the auxetic tube show strong alignment with the Ritz method. Additionally, the effects of various parameters on the mechanical post-buckling and nonlinear bending properties of the re-entrant tubular metastructure are thoroughly investigated, providing insights into design optimization for auxetic metastructures. For instance, the buckling modes under the clamped-clamped boundary condition decrease by approximately 37% when the absolute value of the cell angle is increased from \(15^{\circ }\) to \(30^{\circ }\). Moreover, the statistical analysis confirmed that for the prediction of post-buckling responses, the Random Forest model provided the most accurate predictions, achieving a mean squared error (MSE) of 13.31 and an \(R^2\) value of 99.9%.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Anhänge
Nur mit Berechtigung zugänglich
Literatur
1.
Zurück zum Zitat Evans Kenneth E, Nkansah MA, Hutchinson IJ, Rogers SC (1991) Molecular network design. Nature 353(6340):124–124CrossRef Evans Kenneth E, Nkansah MA, Hutchinson IJ, Rogers SC (1991) Molecular network design. Nature 353(6340):124–124CrossRef
2.
Zurück zum Zitat Zhang J, Guoxing L, You Z (2020) Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review. Compos B Eng 201:108340CrossRef Zhang J, Guoxing L, You Z (2020) Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review. Compos B Eng 201:108340CrossRef
3.
Zurück zum Zitat Chen L, Zhen HC, Zhang Xiang Yu, Gang ZX, Xin R, Min XY (2021) Design, manufacturing and applications of auxetic tubular structures: A review. Thin-Walled Structures 163:107682CrossRef Chen L, Zhen HC, Zhang Xiang Yu, Gang ZX, Xin R, Min XY (2021) Design, manufacturing and applications of auxetic tubular structures: A review. Thin-Walled Structures 163:107682CrossRef
4.
Zurück zum Zitat Lakes RS, Elms K (1993) Indentability of conventional and negative Poisson’s ratio foams. J Compos Mater 27(12):1193–1202CrossRef Lakes RS, Elms K (1993) Indentability of conventional and negative Poisson’s ratio foams. J Compos Mater 27(12):1193–1202CrossRef
5.
Zurück zum Zitat Evans KE, Alderson A (2000) Auxetic materials: functional materials and structures from lateral thinking! Adv Mater 12(9):617–628CrossRef Evans KE, Alderson A (2000) Auxetic materials: functional materials and structures from lateral thinking! Adv Mater 12(9):617–628CrossRef
6.
Zurück zum Zitat Lakes R (1987) Foam structures with a negative Poisson’s ratio. Science 235(4792):1038–1040CrossRef Lakes R (1987) Foam structures with a negative Poisson’s ratio. Science 235(4792):1038–1040CrossRef
7.
Zurück zum Zitat Evans KE (1991) Auxetic polymers: a new range of materials. Endeavour 15(4):170–174CrossRef Evans KE (1991) Auxetic polymers: a new range of materials. Endeavour 15(4):170–174CrossRef
8.
Zurück zum Zitat Scarpa F, Yates JR, Ciffo LG, Patsias S (2002) Dynamic crushing of auxetic open-cell polyurethane foam. Proc Inst Mech Eng C J Mech Eng Sci 216(12):1153–1156CrossRef Scarpa F, Yates JR, Ciffo LG, Patsias S (2002) Dynamic crushing of auxetic open-cell polyurethane foam. Proc Inst Mech Eng C J Mech Eng Sci 216(12):1153–1156CrossRef
9.
Zurück zum Zitat Liu W, Wang N, Luo T, Lin Z (2016) In-plane dynamic crushing of re-entrant auxetic cellular structure. Materials & Design 100:84–91CrossRef Liu W, Wang N, Luo T, Lin Z (2016) In-plane dynamic crushing of re-entrant auxetic cellular structure. Materials & Design 100:84–91CrossRef
10.
Zurück zum Zitat Hou Shujuan, Liu Taiqu, Zhidan Zhang Xu, Han, and Qing Li. (2015) How does negative Poisson’s ratio of foam filler affect crashworthiness? Materials & Design 82:247–259 Hou Shujuan, Liu Taiqu, Zhidan Zhang Xu, Han, and Qing Li. (2015) How does negative Poisson’s ratio of foam filler affect crashworthiness? Materials & Design 82:247–259
11.
Zurück zum Zitat Mohsenizadeh S, Alipour R, Shokri Rad M, Farokhi Nejad A, Ahmad Z (2015) Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading. Materials & Design 88:258–268CrossRef Mohsenizadeh S, Alipour R, Shokri Rad M, Farokhi Nejad A, Ahmad Z (2015) Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading. Materials & Design 88:258–268CrossRef
12.
Zurück zum Zitat Scarpa F, Smith CW, Ruzzene M, Wadee MK (2008) "Mechanical properties of auxetic tubular truss-like structures." physica status solidi (b) 245(3):584-590 Scarpa F, Smith CW, Ruzzene M, Wadee MK (2008) "Mechanical properties of auxetic tubular truss-like structures." physica status solidi (b) 245(3):584-590
13.
Zurück zum Zitat Farrell DT, McGinn C, Bennett GJ (2020) Extension twist deformation response of an auxetic cylindrical structure inspired by deformed cell ligaments. Compos Struct 238:111901CrossRef Farrell DT, McGinn C, Bennett GJ (2020) Extension twist deformation response of an auxetic cylindrical structure inspired by deformed cell ligaments. Compos Struct 238:111901CrossRef
14.
Zurück zum Zitat Masters IG, Evans KE (1996) Models for the elastic deformation of honeycombs. Compos Struct 35(4):403–422CrossRef Masters IG, Evans KE (1996) Models for the elastic deformation of honeycombs. Compos Struct 35(4):403–422CrossRef
15.
Zurück zum Zitat Yang L, Harrysson O, West H, Cormier D (2015) Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing. Int J Solids Struct 69:475–490CrossRef Yang L, Harrysson O, West H, Cormier D (2015) Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing. Int J Solids Struct 69:475–490CrossRef
16.
Zurück zum Zitat Kamarian S, Khalvandi A, Heidarizadi E, Saber-Samandari S, Song J (2024) Prediction and optimization of 3D-printed sandwich beams with chiral cores. Int J Mech Sci 262:108747CrossRef Kamarian S, Khalvandi A, Heidarizadi E, Saber-Samandari S, Song J (2024) Prediction and optimization of 3D-printed sandwich beams with chiral cores. Int J Mech Sci 262:108747CrossRef
17.
Zurück zum Zitat Grima Joseph N, Farrugia Pierre-Sandre, Gatt Ruben, Attard Daphne (2008) "On the auxetic properties of rotating rhombi and parallelograms: A preliminary investigation." physica status solidi (b) 245(3):521-529 Grima Joseph N, Farrugia Pierre-Sandre, Gatt Ruben, Attard Daphne (2008) "On the auxetic properties of rotating rhombi and parallelograms: A preliminary investigation." physica status solidi (b) 245(3):521-529
18.
Zurück zum Zitat Grima Joseph N, Gatt Ruben, Farrugia Pierre-Sandre (2008) "On the properties of auxetic meta-tetrachiral structures." physica status solidi (b) 245, no. 3:511-520 Grima Joseph N, Gatt Ruben, Farrugia Pierre-Sandre (2008) "On the properties of auxetic meta-tetrachiral structures." physica status solidi (b) 245, no. 3:511-520
19.
Zurück zum Zitat Andrew A (2004) Negative Poisson’s ratios from rotating rectangles. Cmst 10(2):137–145CrossRef Andrew A (2004) Negative Poisson’s ratios from rotating rectangles. Cmst 10(2):137–145CrossRef
20.
Zurück zum Zitat Ren X, Shen J, Tran P, Ngo TD, Xie YM (2018) Design and characterisation of a tuneable 3D buckling-induced auxetic metamaterial. Materials & Design 139:336–342CrossRef Ren X, Shen J, Tran P, Ngo TD, Xie YM (2018) Design and characterisation of a tuneable 3D buckling-induced auxetic metamaterial. Materials & Design 139:336–342CrossRef
21.
Zurück zum Zitat Ren X, Shen J, Ghaedizadeh A, Tian H, Xie YM (2015) Experiments and parametric studies on 3D metallic auxetic metamaterials with tuneable mechanical properties. Smart Mater Struct 24(9):095016CrossRef Ren X, Shen J, Ghaedizadeh A, Tian H, Xie YM (2015) Experiments and parametric studies on 3D metallic auxetic metamaterials with tuneable mechanical properties. Smart Mater Struct 24(9):095016CrossRef
22.
Zurück zum Zitat Huang TT, Ren X, Zeng Y, Zhang Y, Luo C, Zhang XY, Xie YM (2021) Based on auxetic foam: A novel type of seismic metamaterial for Lamb waves. Eng Struct 246:112976CrossRef Huang TT, Ren X, Zeng Y, Zhang Y, Luo C, Zhang XY, Xie YM (2021) Based on auxetic foam: A novel type of seismic metamaterial for Lamb waves. Eng Struct 246:112976CrossRef
23.
Zurück zum Zitat Zhang Y, Ren X, Zhang XY, Huang TT, Sun L, Xie YM (2021) A novel buckling-restrained brace with auxetic perforated core: Experimental and numerical studies. Eng Struct 249:113223CrossRef Zhang Y, Ren X, Zhang XY, Huang TT, Sun L, Xie YM (2021) A novel buckling-restrained brace with auxetic perforated core: Experimental and numerical studies. Eng Struct 249:113223CrossRef
24.
Zurück zum Zitat Zhang C, Xiao S-H, Qin Q-H, Wang H (2021) Tunable compressive properties of a novel auxetic tubular material with low stress level. Thin-Walled Structures 164:107882CrossRef Zhang C, Xiao S-H, Qin Q-H, Wang H (2021) Tunable compressive properties of a novel auxetic tubular material with low stress level. Thin-Walled Structures 164:107882CrossRef
25.
Zurück zum Zitat Wang Y, Wang L, Ma Z, Wang T (2016) Parametric analysis of a cylindrical negative Poisson’s ratio structure. Smart Mater Struct 25(3):035038CrossRef Wang Y, Wang L, Ma Z, Wang T (2016) Parametric analysis of a cylindrical negative Poisson’s ratio structure. Smart Mater Struct 25(3):035038CrossRef
26.
Zurück zum Zitat Zhao TF, Deng ZC, Fu CY, Wang XJ, Zhou HY, Chen CQ (2019) Thickness effect on mechanical behavior of auxetic sintered metal fiber sheets. Materials & Design 167:107635CrossRef Zhao TF, Deng ZC, Fu CY, Wang XJ, Zhou HY, Chen CQ (2019) Thickness effect on mechanical behavior of auxetic sintered metal fiber sheets. Materials & Design 167:107635CrossRef
27.
Zurück zum Zitat Li Z, Wang KF, Wang BL (2021) Indentation resistance of brittle auxetic structures: Combining discrete representation and continuum model. Eng Fract Mech 252:107824CrossRef Li Z, Wang KF, Wang BL (2021) Indentation resistance of brittle auxetic structures: Combining discrete representation and continuum model. Eng Fract Mech 252:107824CrossRef
28.
Zurück zum Zitat Novak N, Dubrovski PD, Borovinšek M, Vesenjak M, Ren Z (2020) Deformation behaviour of advanced textile composites with auxetic structure. Compos Struct 252:112761CrossRef Novak N, Dubrovski PD, Borovinšek M, Vesenjak M, Ren Z (2020) Deformation behaviour of advanced textile composites with auxetic structure. Compos Struct 252:112761CrossRef
29.
Zurück zum Zitat El Dhaba AR, Shaat M (2019) Modeling deformation of auxetic and non-auxetic polymer gels. Appl Math Model 74:320–336MathSciNetCrossRef El Dhaba AR, Shaat M (2019) Modeling deformation of auxetic and non-auxetic polymer gels. Appl Math Model 74:320–336MathSciNetCrossRef
30.
Zurück zum Zitat Faludi J, Bayley C, Bhogal S, Iribarne M (2015) Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment. Rapid Prototyping Journal 21(1):14–33CrossRef Faludi J, Bayley C, Bhogal S, Iribarne M (2015) Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment. Rapid Prototyping Journal 21(1):14–33CrossRef
31.
Zurück zum Zitat Qi C, Jiang F, Yang S (2021) Advanced honeycomb designs for improving mechanical properties: A review. Compos B Eng 227:109393CrossRef Qi C, Jiang F, Yang S (2021) Advanced honeycomb designs for improving mechanical properties: A review. Compos B Eng 227:109393CrossRef
32.
Zurück zum Zitat Gibson I, Rosen DW, Stucker B, Khorasani M, Rosen D, Stucker B, Khorasani M (2021) Additive manufacturing technologies, vol 17. Springer, Cham, SwitzerlandCrossRef Gibson I, Rosen DW, Stucker B, Khorasani M, Rosen D, Stucker B, Khorasani M (2021) Additive manufacturing technologies, vol 17. Springer, Cham, SwitzerlandCrossRef
33.
Zurück zum Zitat Mosleh N, Rezadoust AM, Dariushi S (2021) Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing. Mater Manuf Processes 36(4):409–418CrossRef Mosleh N, Rezadoust AM, Dariushi S (2021) Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing. Mater Manuf Processes 36(4):409–418CrossRef
34.
Zurück zum Zitat Zhang Y, Chou YK (2006) Three-dimensional finite element analysis simulations of the fused deposition modelling process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220(10):1663–1671CrossRef Zhang Y, Chou YK (2006) Three-dimensional finite element analysis simulations of the fused deposition modelling process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220(10):1663–1671CrossRef
35.
Zurück zum Zitat Jiao P, Alavi AH (2018) Buckling analysis of graphene-reinforced mechanical metamaterial beams with periodic webbing patterns. Int J Eng Sci 131:1–18MathSciNetCrossRef Jiao P, Alavi AH (2018) Buckling analysis of graphene-reinforced mechanical metamaterial beams with periodic webbing patterns. Int J Eng Sci 131:1–18MathSciNetCrossRef
36.
Zurück zum Zitat Sarvestani HY, Akbarzadeh AH, Niknam H, Hermenean K (2018) 3D printed architected polymeric sandwich panels: Energy absorption and structural performance. Compos Struct 200:886–909CrossRef Sarvestani HY, Akbarzadeh AH, Niknam H, Hermenean K (2018) 3D printed architected polymeric sandwich panels: Energy absorption and structural performance. Compos Struct 200:886–909CrossRef
37.
Zurück zum Zitat Heidari-Rarani M, Rafiee-Afarani M, Zahedi AM (2019) Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites. Compos B Eng 175:107147CrossRef Heidari-Rarani M, Rafiee-Afarani M, Zahedi AM (2019) Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites. Compos B Eng 175:107147CrossRef
38.
Zurück zum Zitat Zhao X, Wei L, Wen D, Zhu G, Yu Q, Ma ZD (2021) Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core. Eng Struct 247:113204CrossRef Zhao X, Wei L, Wen D, Zhu G, Yu Q, Ma ZD (2021) Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core. Eng Struct 247:113204CrossRef
39.
Zurück zum Zitat Hedayatian M, Daneshmehr AR, Liaghat GH (2020) The efficiency of auxetic cores in sandwich beams subjected to low-velocity impact. Int J Appl Mech 12(06):2050061CrossRef Hedayatian M, Daneshmehr AR, Liaghat GH (2020) The efficiency of auxetic cores in sandwich beams subjected to low-velocity impact. Int J Appl Mech 12(06):2050061CrossRef
40.
Zurück zum Zitat Li C, Shen HS, Wang H (2019) Thermal post-buckling of sandwich beams with functionally graded negative Poisson’s ratio honeycomb core. Int J Mech Sci 152:289–297CrossRef Li C, Shen HS, Wang H (2019) Thermal post-buckling of sandwich beams with functionally graded negative Poisson’s ratio honeycomb core. Int J Mech Sci 152:289–297CrossRef
41.
Zurück zum Zitat Zhang XG, Jiang W, Zhang Y, Han D, Luo C, Zhang XY, Hao J, Xie YM, Ren X (2023) Bending performance of 3D re-entrant and hexagonal metamaterials. Thin-Walled Structures 188:110829CrossRef Zhang XG, Jiang W, Zhang Y, Han D, Luo C, Zhang XY, Hao J, Xie YM, Ren X (2023) Bending performance of 3D re-entrant and hexagonal metamaterials. Thin-Walled Structures 188:110829CrossRef
42.
Zurück zum Zitat Pham Quoc-Hoa, Nguyen Phu-Cuong, Tran Trung Thanh, Nguyen-Thoi Trung (2023) "Free vibration analysis of nanoplates with auxetic honeycomb core using a new third-order finite element method and nonlocal elasticity theory." Engineering with Computers 1-19 Pham Quoc-Hoa, Nguyen Phu-Cuong, Tran Trung Thanh, Nguyen-Thoi Trung (2023) "Free vibration analysis of nanoplates with auxetic honeycomb core using a new third-order finite element method and nonlocal elasticity theory." Engineering with Computers 1-19
43.
Zurück zum Zitat Ebrahimi Farzad, Nopour Reza, Dabbagh Ali (2023) "Smart laminates with an auxetic ply rested on visco-Pasternak medium: Active control of the system’s oscillation." Engineering with Computers 1-11 Ebrahimi Farzad, Nopour Reza, Dabbagh Ali (2023) "Smart laminates with an auxetic ply rested on visco-Pasternak medium: Active control of the system’s oscillation." Engineering with Computers 1-11
44.
Zurück zum Zitat Khoshgoftar MJ, Barkhordari A, Limuti M, Buccino F, Vergani L, Mirzaali MJ (2022) Bending analysis of sandwich panel composite with a re-entrant lattice core using zig-zag theory. Sci Rep 12(1):15796CrossRef Khoshgoftar MJ, Barkhordari A, Limuti M, Buccino F, Vergani L, Mirzaali MJ (2022) Bending analysis of sandwich panel composite with a re-entrant lattice core using zig-zag theory. Sci Rep 12(1):15796CrossRef
45.
Zurück zum Zitat Zhang XM, Wang YC, Su MN (2023) Experimental, numerical and analytical study to develop a design method for bending and shear resistances of 3D printed beetle elytron inspired sandwich plate (beetle elytron plate). Thin-Walled Structures 183:110371CrossRef Zhang XM, Wang YC, Su MN (2023) Experimental, numerical and analytical study to develop a design method for bending and shear resistances of 3D printed beetle elytron inspired sandwich plate (beetle elytron plate). Thin-Walled Structures 183:110371CrossRef
46.
Zurück zum Zitat Cong PH, Duc ND (2022) Nonlinear thermo-mechanical analysis of ES double curved shallow auxetic honeycomb sandwich shells with temperature-dependent properties. Compos Struct 279:114739CrossRef Cong PH, Duc ND (2022) Nonlinear thermo-mechanical analysis of ES double curved shallow auxetic honeycomb sandwich shells with temperature-dependent properties. Compos Struct 279:114739CrossRef
47.
Zurück zum Zitat Cong PH, Long PT, Van Nhat N, Duc ND (2019) Geometrically nonlinear dynamic response of eccentrically stiffened circular cylindrical shells with negative poisson’s ratio in auxetic honeycombs core layer. Int J Mech Sci 152:443–453CrossRef Cong PH, Long PT, Van Nhat N, Duc ND (2019) Geometrically nonlinear dynamic response of eccentrically stiffened circular cylindrical shells with negative poisson’s ratio in auxetic honeycombs core layer. Int J Mech Sci 152:443–453CrossRef
48.
Zurück zum Zitat Eipakchi H, Nasrekani FM (2020) Vibrational behavior of composite cylindrical shells with auxetic honeycombs core layer subjected to a moving pressure. Compos Struct 254:112847CrossRef Eipakchi H, Nasrekani FM (2020) Vibrational behavior of composite cylindrical shells with auxetic honeycombs core layer subjected to a moving pressure. Compos Struct 254:112847CrossRef
49.
Zurück zum Zitat Li C, Yang J, Shen H-S (2022) Postbuckling of pressure-loaded auxetic sandwich cylindrical shells with FG-GRC facesheets and 3D double-V meta-lattice core. Thin-Walled Structures 177:109440CrossRef Li C, Yang J, Shen H-S (2022) Postbuckling of pressure-loaded auxetic sandwich cylindrical shells with FG-GRC facesheets and 3D double-V meta-lattice core. Thin-Walled Structures 177:109440CrossRef
50.
Zurück zum Zitat Kallannavar V, Kattimani S (2023) Effect of temperature and porosity on free vibration characteristics of a doubly-curved skew laminated sandwich composite structures with 3D printed PLA core. Thin-Walled Structures 182:110263CrossRef Kallannavar V, Kattimani S (2023) Effect of temperature and porosity on free vibration characteristics of a doubly-curved skew laminated sandwich composite structures with 3D printed PLA core. Thin-Walled Structures 182:110263CrossRef
51.
Zurück zum Zitat Hamrouni A, Rebiere JL, El Mahi A, Beyaoui M, Haddar M (2023) Experimental and numerical investigation of the static behavior of a 3D printed bio-based anti-trichiral sandwich. J Compos Mater 57(13):2161–2178CrossRef Hamrouni A, Rebiere JL, El Mahi A, Beyaoui M, Haddar M (2023) Experimental and numerical investigation of the static behavior of a 3D printed bio-based anti-trichiral sandwich. J Compos Mater 57(13):2161–2178CrossRef
52.
Zurück zum Zitat Eryildiz M (2023) Experimental investigation and simulation of 3D printed sandwich structures with novel core topologies under bending loads. International Polymer Processing, (0) Eryildiz M (2023) Experimental investigation and simulation of 3D printed sandwich structures with novel core topologies under bending loads. International Polymer Processing, (0)
53.
Zurück zum Zitat Jiang Y, Li Y (2018) 3D printed auxetic mechanical metamaterial with chiral cells and re-entrant cores. Sci Rep 8(1):1–11 Jiang Y, Li Y (2018) 3D printed auxetic mechanical metamaterial with chiral cells and re-entrant cores. Sci Rep 8(1):1–11
54.
Zurück zum Zitat Najafi M, Ahmadi H, Liaghat G (2022) Evaluation of the mechanical properties of fully integrated 3D printed polymeric sandwich structures with auxetic cores: experimental and numerical assessment. The International Journal of Advanced Manufacturing Technology 122(9–10):4079–4098CrossRef Najafi M, Ahmadi H, Liaghat G (2022) Evaluation of the mechanical properties of fully integrated 3D printed polymeric sandwich structures with auxetic cores: experimental and numerical assessment. The International Journal of Advanced Manufacturing Technology 122(9–10):4079–4098CrossRef
55.
Zurück zum Zitat Ebrahimi MS, Noruzi M, Hamzehei R, Etemadi E, Hashemi R (2023) Revolutionary auxetic intravascular medical stents for angioplasty applications. Materials & Design 235:112393CrossRef Ebrahimi MS, Noruzi M, Hamzehei R, Etemadi E, Hashemi R (2023) Revolutionary auxetic intravascular medical stents for angioplasty applications. Materials & Design 235:112393CrossRef
56.
Zurück zum Zitat Abbaslou M, Hashemi R, Etemadi E (2023) Novel hybrid 3D-printed auxetic vascular stent based on re-entrant and meta-trichiral unit cells: Finite element simulation with experimental verifications. Materials Today Communications 35:105742CrossRef Abbaslou M, Hashemi R, Etemadi E (2023) Novel hybrid 3D-printed auxetic vascular stent based on re-entrant and meta-trichiral unit cells: Finite element simulation with experimental verifications. Materials Today Communications 35:105742CrossRef
57.
Zurück zum Zitat Kuribayashi K, Tsuchiya K, You Z, Tomus D, Umemoto M, Ito T, Sasaki M (2006) Self-deployable origami stent grafts as a biomedical application of Ni-rich TiNi shape memory alloy foil. Mater Sci Eng, A 419(1–2):131–137CrossRef Kuribayashi K, Tsuchiya K, You Z, Tomus D, Umemoto M, Ito T, Sasaki M (2006) Self-deployable origami stent grafts as a biomedical application of Ni-rich TiNi shape memory alloy foil. Mater Sci Eng, A 419(1–2):131–137CrossRef
58.
Zurück zum Zitat Ali MN, Rehman IU (2011) An Auxetic structure configured as oesophageal stent with potential to be used for palliative treatment of oesophageal cancer; development and in vitro mechanical analysis. J Mater Sci - Mater Med 22:2573–2581CrossRef Ali MN, Rehman IU (2011) An Auxetic structure configured as oesophageal stent with potential to be used for palliative treatment of oesophageal cancer; development and in vitro mechanical analysis. J Mater Sci - Mater Med 22:2573–2581CrossRef
59.
Zurück zum Zitat Munib Z, Ali MN, Ansari U, Mir M (2015) Auxetic polymeric bone stent for tubular fractures: design, fabrication and structural analysis. Polym-Plast Technol Eng 54(16):1667–1678CrossRef Munib Z, Ali MN, Ansari U, Mir M (2015) Auxetic polymeric bone stent for tubular fractures: design, fabrication and structural analysis. Polym-Plast Technol Eng 54(16):1667–1678CrossRef
60.
Zurück zum Zitat Burriesci G, Bergamasco G, Sorin Biomedica Cardio SpA, (2011) Annuloplasty prosthesis with an auxetic structure. U.S. Patent 8,034,103 Burriesci G, Bergamasco G, Sorin Biomedica Cardio SpA, (2011) Annuloplasty prosthesis with an auxetic structure. U.S. Patent 8,034,103
61.
Zurück zum Zitat Ren X, Shen J, Ghaedizadeh A, Tian H, Xie YM (2016) A simple auxetic tubular structure with tuneable mechanical properties. Smart Mater Struct 25(6):065012CrossRef Ren X, Shen J, Ghaedizadeh A, Tian H, Xie YM (2016) A simple auxetic tubular structure with tuneable mechanical properties. Smart Mater Struct 25(6):065012CrossRef
62.
Zurück zum Zitat Ren X, Shen J, Tran P, Ngo TD, Xie YM (2018) Auxetic nail: Design and experimental study. Compos Struct 184:288–298CrossRef Ren X, Shen J, Tran P, Ngo TD, Xie YM (2018) Auxetic nail: Design and experimental study. Compos Struct 184:288–298CrossRef
63.
Zurück zum Zitat Zhang XY, Wang XY, Ren X, Xie YM, Yao W, Zhou YY, Wang SL, Han CZ (2021) A novel type of tubular structure with auxeticity both in radial direction and wall thickness. Thin-Walled Structures 163:107758CrossRef Zhang XY, Wang XY, Ren X, Xie YM, Yao W, Zhou YY, Wang SL, Han CZ (2021) A novel type of tubular structure with auxeticity both in radial direction and wall thickness. Thin-Walled Structures 163:107758CrossRef
64.
Zurück zum Zitat Gao Q, Zhao X, Wang CZ, Wang LM, Ma ZD (2020) Crashworthiness analysis of a cylindrical auxetic structure under axial impact loading. SCIENCE CHINA Technol Sci 63(1):140–154CrossRef Gao Q, Zhao X, Wang CZ, Wang LM, Ma ZD (2020) Crashworthiness analysis of a cylindrical auxetic structure under axial impact loading. SCIENCE CHINA Technol Sci 63(1):140–154CrossRef
65.
Zurück zum Zitat Gao Q, Zhao X, Wang C, Wang L, Ma Z (2018) Multi-objective crashworthiness optimization for an auxetic cylindrical structure under axial impact loading. Materials & design 143:120–130CrossRef Gao Q, Zhao X, Wang C, Wang L, Ma Z (2018) Multi-objective crashworthiness optimization for an auxetic cylindrical structure under axial impact loading. Materials & design 143:120–130CrossRef
66.
Zurück zum Zitat Jin X, Wang Z, Ning J, Xiao G, Liu E, Shu X (2016) Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading. Compos B Eng 106:206–217CrossRef Jin X, Wang Z, Ning J, Xiao G, Liu E, Shu X (2016) Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading. Compos B Eng 106:206–217CrossRef
67.
Zurück zum Zitat Usta F, Turkmen HS, Scarpa F (2021) Low-velocity impact resistance of composite sandwich panels with various types of auxetic and non-auxetic core structures. Thin-Walled Structures 163:107738CrossRef Usta F, Turkmen HS, Scarpa F (2021) Low-velocity impact resistance of composite sandwich panels with various types of auxetic and non-auxetic core structures. Thin-Walled Structures 163:107738CrossRef
68.
Zurück zum Zitat Gao Q, Liao W-H (2021) Energy absorption of thin walled tube filled with gradient auxetic structures-theory and simulation. Int J Mech Sci 201:106475CrossRef Gao Q, Liao W-H (2021) Energy absorption of thin walled tube filled with gradient auxetic structures-theory and simulation. Int J Mech Sci 201:106475CrossRef
69.
Zurück zum Zitat Zhang W, Zhao S, Scarpa F, Wang J, Sun R (2021) In-plane mechanical behavior of novel auxetic hybrid metamaterials. Thin-Walled Structures 159:107191CrossRef Zhang W, Zhao S, Scarpa F, Wang J, Sun R (2021) In-plane mechanical behavior of novel auxetic hybrid metamaterials. Thin-Walled Structures 159:107191CrossRef
70.
Zurück zum Zitat Guo M-F, Yang H, Ma L (2020) Design and analysis of 2D double-U auxetic honeycombs. Thin-Walled Structures 155:106915CrossRef Guo M-F, Yang H, Ma L (2020) Design and analysis of 2D double-U auxetic honeycombs. Thin-Walled Structures 155:106915CrossRef
71.
Zurück zum Zitat Meena K, Singamneni S (2019) A new auxetic structure with significantly reduced stress concentration effects. Materials & Design 173:107779CrossRef Meena K, Singamneni S (2019) A new auxetic structure with significantly reduced stress concentration effects. Materials & Design 173:107779CrossRef
72.
Zurück zum Zitat Lu H, Wang X, Chen T (2021) In-plane dynamics crushing of a combined auxetic honeycomb with negative Poisson’s ratio and enhanced energy absorption. Thin-Walled Structures 160:107366CrossRef Lu H, Wang X, Chen T (2021) In-plane dynamics crushing of a combined auxetic honeycomb with negative Poisson’s ratio and enhanced energy absorption. Thin-Walled Structures 160:107366CrossRef
73.
Zurück zum Zitat Fu M-H, Chen Yu, Ling-Ling H (2017) A novel auxetic honeycomb with enhanced in-plane stiffness and buckling strength. Compos Struct 160:574–585CrossRef Fu M-H, Chen Yu, Ling-Ling H (2017) A novel auxetic honeycomb with enhanced in-plane stiffness and buckling strength. Compos Struct 160:574–585CrossRef
74.
Zurück zum Zitat Airoldi A, Novak N, Sgobba F, Gilardelli A, Borovinšek M (2020) Foam-filled energy absorbers with auxetic behaviour for localized impacts. Mater Sci Eng, A 788:139500CrossRef Airoldi A, Novak N, Sgobba F, Gilardelli A, Borovinšek M (2020) Foam-filled energy absorbers with auxetic behaviour for localized impacts. Mater Sci Eng, A 788:139500CrossRef
75.
Zurück zum Zitat Novak N, Krstulović-Opara L, Ren Z, Vesenjak M (2020) Mechanical properties of hybrid metamaterial with auxetic chiral cellular structure and silicon filler. Compos Struct 234:111718CrossRef Novak N, Krstulović-Opara L, Ren Z, Vesenjak M (2020) Mechanical properties of hybrid metamaterial with auxetic chiral cellular structure and silicon filler. Compos Struct 234:111718CrossRef
76.
Zurück zum Zitat Zhou H, Jia K, Wang X, Xiong M-X, Wang Y (2020) Experimental and numerical investigation of low velocity impact response of foam concrete filled auxetic honeycombs. Thin-Walled Structures 154:106898CrossRef Zhou H, Jia K, Wang X, Xiong M-X, Wang Y (2020) Experimental and numerical investigation of low velocity impact response of foam concrete filled auxetic honeycombs. Thin-Walled Structures 154:106898CrossRef
77.
Zurück zum Zitat Li T, Liu F, Wang L (2020) Enhancing indentation and impact resistance in auxetic composite materials. Compos B Eng 198:108229CrossRef Li T, Liu F, Wang L (2020) Enhancing indentation and impact resistance in auxetic composite materials. Compos B Eng 198:108229CrossRef
78.
Zurück zum Zitat Yu R, Luo W, Yuan H, Liu J, He W, Zixian Yu (2020) Experimental and numerical research on foam filled re-entrant cellular structure with negative Poisson’s ratio. Thin-Walled Structures 153:106679CrossRef Yu R, Luo W, Yuan H, Liu J, He W, Zixian Yu (2020) Experimental and numerical research on foam filled re-entrant cellular structure with negative Poisson’s ratio. Thin-Walled Structures 153:106679CrossRef
79.
Zurück zum Zitat Pozniak AA, Wojciechowski KW, Grima JN, Mizzi L (2016) Planar auxeticity from elliptic inclusions. Compos B Eng 94:379–388CrossRef Pozniak AA, Wojciechowski KW, Grima JN, Mizzi L (2016) Planar auxeticity from elliptic inclusions. Compos B Eng 94:379–388CrossRef
80.
Zurück zum Zitat Mohsenizadeh S, Ahmad Z (2019) Auxeticity effect on crushing characteristics of auxetic foam-filled square tubes under axial loading. Thin-Walled Structures 145:106379CrossRef Mohsenizadeh S, Ahmad Z (2019) Auxeticity effect on crushing characteristics of auxetic foam-filled square tubes under axial loading. Thin-Walled Structures 145:106379CrossRef
81.
Zurück zum Zitat Zhang Xiang Yu, Ren Xin (2020) "A simple methodology to generate metamaterials and structures with negative Poisson’s ratio." physica status solidi (b) 257, 10:2000439 Zhang Xiang Yu, Ren Xin (2020) "A simple methodology to generate metamaterials and structures with negative Poisson’s ratio." physica status solidi (b) 257, 10:2000439
82.
Zurück zum Zitat Gomes RA, Antonio L, de Oliveira M, Francisco B, Gomes GF (2023) Tubular auxetic structures: A review. Thin-Walled Structures 188:110850CrossRef Gomes RA, Antonio L, de Oliveira M, Francisco B, Gomes GF (2023) Tubular auxetic structures: A review. Thin-Walled Structures 188:110850CrossRef
83.
Zurück zum Zitat Karnessis N, Burriesci G (2013) Uniaxial and buckling mechanical response of auxetic cellular tubes. Smart Mater Struct 22(8):084008CrossRef Karnessis N, Burriesci G (2013) Uniaxial and buckling mechanical response of auxetic cellular tubes. Smart Mater Struct 22(8):084008CrossRef
84.
Zurück zum Zitat Montazeri A, Naderinejad M, Mahnama M, Hasani A (2024) 3D-printed twisting tubular metamaterials with tunable mechanical and torsional characteristics. Int J Mech Sci 262:108719CrossRef Montazeri A, Naderinejad M, Mahnama M, Hasani A (2024) 3D-printed twisting tubular metamaterials with tunable mechanical and torsional characteristics. Int J Mech Sci 262:108719CrossRef
85.
Zurück zum Zitat Ling B, Wei K, Zhaoliang Q, Fang D (2021) Design and analysis for large magnitudes of programmable Poisson’s ratio in a series of lightweight cylindrical metastructures. Int J Mech Sci 195:106220CrossRef Ling B, Wei K, Zhaoliang Q, Fang D (2021) Design and analysis for large magnitudes of programmable Poisson’s ratio in a series of lightweight cylindrical metastructures. Int J Mech Sci 195:106220CrossRef
86.
Zurück zum Zitat Han D, Zhang Y, Zhang XY, Xie YM, Ren X (2023) Lightweight auxetic tubular metamaterials: Design and mechanical characteristics. Compos Struct 311:116849CrossRef Han D, Zhang Y, Zhang XY, Xie YM, Ren X (2023) Lightweight auxetic tubular metamaterials: Design and mechanical characteristics. Compos Struct 311:116849CrossRef
87.
Zurück zum Zitat Ren X, Zhang Y, Han CZ, Han D, Zhang XY, Zhang XG, Xie YM (2022) Mechanical properties of foam-filled auxetic circular tubes: Experimental and numerical study. Thin-Walled Structures 170:108584CrossRef Ren X, Zhang Y, Han CZ, Han D, Zhang XY, Zhang XG, Xie YM (2022) Mechanical properties of foam-filled auxetic circular tubes: Experimental and numerical study. Thin-Walled Structures 170:108584CrossRef
88.
Zurück zum Zitat Lingamdinne LP, Amelirad O, Koduru JR, Karri RR, Chang Y-Y, Dehghani MH, Mubarak NM (2023) Functionalized bentonite for removal of Pb (II) and As (V) from surface water: Predicting capability and mechanism using artificial neural network. Journal of Water Process Engineering 51:103386CrossRef Lingamdinne LP, Amelirad O, Koduru JR, Karri RR, Chang Y-Y, Dehghani MH, Mubarak NM (2023) Functionalized bentonite for removal of Pb (II) and As (V) from surface water: Predicting capability and mechanism using artificial neural network. Journal of Water Process Engineering 51:103386CrossRef
89.
Zurück zum Zitat Moradi H, Atashi P, Amelirad O, Yang J-K, Chang Y-Y, Kamranifard T (2022) Machine learning modeling and DOE-assisted optimization in synthesis of nanosilica particles via Stöber method. Advances in nano research 12(4):387–403 Moradi H, Atashi P, Amelirad O, Yang J-K, Chang Y-Y, Kamranifard T (2022) Machine learning modeling and DOE-assisted optimization in synthesis of nanosilica particles via Stöber method. Advances in nano research 12(4):387–403
90.
Zurück zum Zitat Shariati M, Kamyab H, Habibi M, Ahmadi S, Naghipour M, Gorjinezhad F, Mohammadirad S, Aminian A (2023) Sulfuric acid resistance of concrete containing coal waste as a partial substitute for fine and coarse aggregates. Fuel 348:128311CrossRef Shariati M, Kamyab H, Habibi M, Ahmadi S, Naghipour M, Gorjinezhad F, Mohammadirad S, Aminian A (2023) Sulfuric acid resistance of concrete containing coal waste as a partial substitute for fine and coarse aggregates. Fuel 348:128311CrossRef
91.
Zurück zum Zitat Lu S, Li S, Habibi M, Safarpour H (2023) Improving the thermo-electro-mechanical responses of MEMS resonant accelerometers via a novel multi-layer perceptron neural network. Measurement 218:113168CrossRef Lu S, Li S, Habibi M, Safarpour H (2023) Improving the thermo-electro-mechanical responses of MEMS resonant accelerometers via a novel multi-layer perceptron neural network. Measurement 218:113168CrossRef
92.
Zurück zum Zitat Nam J, Yong H, Hwang J, Choi J (2021) Training an artificial neural network for recognizing electron collision patterns. Phys Lett A 387:127005CrossRef Nam J, Yong H, Hwang J, Choi J (2021) Training an artificial neural network for recognizing electron collision patterns. Phys Lett A 387:127005CrossRef
93.
Zurück zum Zitat Wang Z-H, Dian-Yao Gong X, Li G-TL, Zhang D-H (2017) Prediction of bending force in the hot strip rolling process using artificial neural network and genetic algorithm (ANN-GA). The International Journal of Advanced Manufacturing Technology 93:3325–3338CrossRef Wang Z-H, Dian-Yao Gong X, Li G-TL, Zhang D-H (2017) Prediction of bending force in the hot strip rolling process using artificial neural network and genetic algorithm (ANN-GA). The International Journal of Advanced Manufacturing Technology 93:3325–3338CrossRef
94.
Zurück zum Zitat Ya TMYS Tuan, Alebrahim Reza, Fitri Nadziim, Alebrahim Mahdi (2019) "Analysis of cantilever beam deflection under uniformly distributed load using artificial neural networks." In MATEC web of conferences, vol. 255, p. 06004. EDP Sciences Ya TMYS Tuan, Alebrahim Reza, Fitri Nadziim, Alebrahim Mahdi (2019) "Analysis of cantilever beam deflection under uniformly distributed load using artificial neural networks." In MATEC web of conferences, vol. 255, p. 06004. EDP Sciences
95.
Zurück zum Zitat Yan Hongru, Yu Hongjun, Zhu Shuai, Wang Zelong , Zhang Yingbin , Guo Licheng (2024) "Nonlinear properties prediction and inverse design of a porous auxetic metamaterial based on neural networks." Thin-Walled Structures: 111717 Yan Hongru, Yu Hongjun, Zhu Shuai, Wang Zelong , Zhang Yingbin , Guo Licheng (2024) "Nonlinear properties prediction and inverse design of a porous auxetic metamaterial based on neural networks." Thin-Walled Structures: 111717
96.
Zurück zum Zitat Yang C, Chang S, Haiting H, Habibi M, Safarpour H, Khadimallah MA (2023) Performance optimization of photovoltaic and solar cells via a hybrid and efficient chimp algorithm. Sol Energy 253:343–359CrossRef Yang C, Chang S, Haiting H, Habibi M, Safarpour H, Khadimallah MA (2023) Performance optimization of photovoltaic and solar cells via a hybrid and efficient chimp algorithm. Sol Energy 253:343–359CrossRef
97.
Zurück zum Zitat Zheng W, Liu J, Oyarhossein MA, Safarpour H, Habibi M (2023) Prediction of nth-order derivatives for vibration responses of a sandwich shell composed of a magnetorheological core and composite face layers. Eng Anal Boundary Elem 146:170–183MathSciNetCrossRef Zheng W, Liu J, Oyarhossein MA, Safarpour H, Habibi M (2023) Prediction of nth-order derivatives for vibration responses of a sandwich shell composed of a magnetorheological core and composite face layers. Eng Anal Boundary Elem 146:170–183MathSciNetCrossRef
98.
Zurück zum Zitat Guo J, Baharvand A, Tazeddinova D, Habibi M, Safarpour H, Roco-Videla A, Selmi A (2022) An intelligent computer method for vibration responses of the spinning multi-layer symmetric nanosystem using multi-physics modeling. Engineering with Computers 38(Suppl 5):4217–4238CrossRef Guo J, Baharvand A, Tazeddinova D, Habibi M, Safarpour H, Roco-Videla A, Selmi A (2022) An intelligent computer method for vibration responses of the spinning multi-layer symmetric nanosystem using multi-physics modeling. Engineering with Computers 38(Suppl 5):4217–4238CrossRef
99.
Zurück zum Zitat Liu Hui, Zhao Yao, Pishbin Mohammad, Mostafa Habibi MO, Bashir, and Alibek Issakhov. (2022) A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method. Engineering with Computers 38(Suppl 5):4181–4196 Liu Hui, Zhao Yao, Pishbin Mohammad, Mostafa Habibi MO, Bashir, and Alibek Issakhov. (2022) A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method. Engineering with Computers 38(Suppl 5):4181–4196
100.
Zurück zum Zitat Wu J, Habibi M (2022) Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods. Engineering with Computers 38(Suppl 5):4127–4143CrossRef Wu J, Habibi M (2022) Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods. Engineering with Computers 38(Suppl 5):4127–4143CrossRef
101.
Zurück zum Zitat Hemmat Esfe, Mohammad, Mohammad Reza Hassani Ahangar, Davood Toghraie, Mohammad Hadi Hajmohammad, Hadi Rostamian, and Hossein Tourang. "Designing artificial neural network on thermal conductivity of Al 2 O 3-water-EG (60-40 Hemmat Esfe, Mohammad, Mohammad Reza Hassani Ahangar, Davood Toghraie, Mohammad Hadi Hajmohammad, Hadi Rostamian, and Hossein Tourang. "Designing artificial neural network on thermal conductivity of Al 2 O 3-water-EG (60-40
102.
Zurück zum Zitat Toghraie D, Sina N, Jolfaei NA, Hajian M, Afrand M (2019) Designing an Artificial Neural Network (ANN) to predict the viscosity of Silver/Ethylene glycol nanofluid at different temperatures and volume fraction of nanoparticles. Physica A 534:122142CrossRef Toghraie D, Sina N, Jolfaei NA, Hajian M, Afrand M (2019) Designing an Artificial Neural Network (ANN) to predict the viscosity of Silver/Ethylene glycol nanofluid at different temperatures and volume fraction of nanoparticles. Physica A 534:122142CrossRef
103.
Zurück zum Zitat Faridzadeh MohammadReza, Toghraie Davood Semiromi, Niroomand Amirhossein (2014) "Analysis of laminar mixed convection in an inclined square lid-driven cavity with a nanofluid by using an artificial neural network." Heat Transfer Research 45, no. 4 Faridzadeh MohammadReza, Toghraie Davood Semiromi, Niroomand Amirhossein (2014) "Analysis of laminar mixed convection in an inclined square lid-driven cavity with a nanofluid by using an artificial neural network." Heat Transfer Research 45, no. 4
104.
Zurück zum Zitat Rostami S, Toghraie D, Shabani B, Sina N, Barnoon P (2021) Measurement of the thermal conductivity of MWCNT-CuO/water hybrid nanofluid using artificial neural networks (ANNs). J Therm Anal Calorim 143(2):1097–1105CrossRef Rostami S, Toghraie D, Shabani B, Sina N, Barnoon P (2021) Measurement of the thermal conductivity of MWCNT-CuO/water hybrid nanofluid using artificial neural networks (ANNs). J Therm Anal Calorim 143(2):1097–1105CrossRef
105.
Zurück zum Zitat He Wei, Ruhani Behrooz, Toghraie Davood, Izadpanahi Niloufar, Esfahani Navid Nasajpour, Karimipour Arash, Afrand Masoud "Using of artificial neural networks (ANNs) to predict the thermal conductivity of zinc oxide-silver (50 He Wei, Ruhani Behrooz, Toghraie Davood, Izadpanahi Niloufar, Esfahani Navid Nasajpour, Karimipour Arash, Afrand Masoud "Using of artificial neural networks (ANNs) to predict the thermal conductivity of zinc oxide-silver (50
106.
Zurück zum Zitat Toghraie Davood Semiromi, Sina Nima, Mozafarifard Milad, As’ ad Alizadeh, Soltani Farid, Ali Fazilati Mohammad (2020) "Prediction of dynamic viscosity of a new non-Newtonian hybrid nanofluid using experimental and artificial neural network (ANN) methods." Heat Transfer Research 51, no. 15 Toghraie Davood Semiromi, Sina Nima, Mozafarifard Milad, As’ ad Alizadeh, Soltani Farid, Ali Fazilati Mohammad (2020) "Prediction of dynamic viscosity of a new non-Newtonian hybrid nanofluid using experimental and artificial neural network (ANN) methods." Heat Transfer Research 51, no. 15
107.
Zurück zum Zitat Feng S, Zhou H, Dong H (2019) Using deep neural network with small dataset to predict material defects. Materials & Design 162:300–310CrossRef Feng S, Zhou H, Dong H (2019) Using deep neural network with small dataset to predict material defects. Materials & Design 162:300–310CrossRef
108.
Zurück zum Zitat Zhang Y, Ling C (2018) A strategy to apply machine learning to small datasets in materials science. NPJ Comput Mater 4(1):25CrossRef Zhang Y, Ling C (2018) A strategy to apply machine learning to small datasets in materials science. NPJ Comput Mater 4(1):25CrossRef
109.
Zurück zum Zitat Kechagias JD, Tsiolikas A, Petousis M, Ninikas K, Vidakis N, Tzounis L (2022) A robust methodology for optimizing the topology and the learning parameters of an ANN for accurate predictions of laser-cut edges surface roughness. Simul Model Pract Theory 114:102414CrossRef Kechagias JD, Tsiolikas A, Petousis M, Ninikas K, Vidakis N, Tzounis L (2022) A robust methodology for optimizing the topology and the learning parameters of an ANN for accurate predictions of laser-cut edges surface roughness. Simul Model Pract Theory 114:102414CrossRef
110.
Zurück zum Zitat Chen C, Zuo Y, Ye W, Li X, Deng Z, Ong SP (2020) A critical review of machine learning of energy materials. Adv Energy Mater 10(8):1903242CrossRef Chen C, Zuo Y, Ye W, Li X, Deng Z, Ong SP (2020) A critical review of machine learning of energy materials. Adv Energy Mater 10(8):1903242CrossRef
111.
Zurück zum Zitat Fatehi E, Yazdani Sarvestani H, Ashrafi B, Akbarzadeh AH (2021) Accelerated design of architectured ceramics with tunable thermal resistance via a hybrid machine learning and finite element approach. Materials & Design 210:110056CrossRef Fatehi E, Yazdani Sarvestani H, Ashrafi B, Akbarzadeh AH (2021) Accelerated design of architectured ceramics with tunable thermal resistance via a hybrid machine learning and finite element approach. Materials & Design 210:110056CrossRef
112.
Zurück zum Zitat Saberi S, Nasiri H, Ghorbani O, Friswell MI, Castro SGP (2023) Explainable artificial intelligence to investigate the contribution of design variables to the static characteristics of bistable composite laminates. Materials 16(15):5381CrossRef Saberi S, Nasiri H, Ghorbani O, Friswell MI, Castro SGP (2023) Explainable artificial intelligence to investigate the contribution of design variables to the static characteristics of bistable composite laminates. Materials 16(15):5381CrossRef
113.
Zurück zum Zitat Felsch G, Ghavidelnia N, Schwarz D, Slesarenko V (2023) Controlling auxeticity in curved-beam metamaterials via a deep generative model. Comput Methods Appl Mech Eng 410:116032MathSciNetCrossRef Felsch G, Ghavidelnia N, Schwarz D, Slesarenko V (2023) Controlling auxeticity in curved-beam metamaterials via a deep generative model. Comput Methods Appl Mech Eng 410:116032MathSciNetCrossRef
114.
Zurück zum Zitat Chen X, Fan L, Lin P (2023) 2D-GDQM and adaptively tuned deep neural network for frequency analysis of the sandwich disk with honeycomb resting on elastic foundation. Eng Anal Boundary Elem 155:323–339MathSciNetCrossRef Chen X, Fan L, Lin P (2023) 2D-GDQM and adaptively tuned deep neural network for frequency analysis of the sandwich disk with honeycomb resting on elastic foundation. Eng Anal Boundary Elem 155:323–339MathSciNetCrossRef
115.
Zurück zum Zitat Pham Q-H, Nguyen P-C, Tran TT (2022) Free vibration response of auxetic honeycomb sandwich plates using an improved higher-order ES-MITC3 element and artificial neural network. Thin-Walled Structures 175:109203CrossRef Pham Q-H, Nguyen P-C, Tran TT (2022) Free vibration response of auxetic honeycomb sandwich plates using an improved higher-order ES-MITC3 element and artificial neural network. Thin-Walled Structures 175:109203CrossRef
116.
Zurück zum Zitat Fallah A, Aghdam MM (2024) Physics-informed neural network for bending and free vibration analysis of three-dimensional functionally graded porous beam resting on elastic foundation. Engineering with Computers 40(1):437–454CrossRef Fallah A, Aghdam MM (2024) Physics-informed neural network for bending and free vibration analysis of three-dimensional functionally graded porous beam resting on elastic foundation. Engineering with Computers 40(1):437–454CrossRef
117.
Zurück zum Zitat Bartošák M (2022) Using machine learning to predict lifetime under isothermal low-cycle fatigue and thermo-mechanical fatigue loading. Int J Fatigue 163:107067CrossRef Bartošák M (2022) Using machine learning to predict lifetime under isothermal low-cycle fatigue and thermo-mechanical fatigue loading. Int J Fatigue 163:107067CrossRef
118.
Zurück zum Zitat Liu X, Wang X-L (2023) Natural rubber components fatigue life estimation through an extreme learning machine. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237(1):81–91CrossRef Liu X, Wang X-L (2023) Natural rubber components fatigue life estimation through an extreme learning machine. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237(1):81–91CrossRef
119.
Zurück zum Zitat He GY, Zhao YX, Yan CL (2022) Application of tabular data synthesis using generative adversarial networks on machine learning-based multiaxial fatigue life prediction. Int J Press Vessels Pip 199:104779CrossRef He GY, Zhao YX, Yan CL (2022) Application of tabular data synthesis using generative adversarial networks on machine learning-based multiaxial fatigue life prediction. Int J Press Vessels Pip 199:104779CrossRef
120.
Zurück zum Zitat Khalvandi A, Saber-Samandari S, Aghdam MM (2022) Application of artificial neural networks to predict Young’s moduli of cartilage scaffolds: an in-vitro and micromechanical study. Biomaterials Advances 136:212768CrossRef Khalvandi A, Saber-Samandari S, Aghdam MM (2022) Application of artificial neural networks to predict Young’s moduli of cartilage scaffolds: an in-vitro and micromechanical study. Biomaterials Advances 136:212768CrossRef
121.
Zurück zum Zitat Kamarian Saeed, Teimouri Amir, Alinia Maysam, Saber-Samandari Saeed, Song Jung-il (2024) "Machine learning for bending behavior of sandwich beams with 3D-printed core and natural fiber-reinforced composite face sheets." Polymer Composites Kamarian Saeed, Teimouri Amir, Alinia Maysam, Saber-Samandari Saeed, Song Jung-il (2024) "Machine learning for bending behavior of sandwich beams with 3D-printed core and natural fiber-reinforced composite face sheets." Polymer Composites
122.
Zurück zum Zitat Vyavahare S, Teraiya S, Kumar S (2023) FDM manufactured auxetic structures: An investigation of mechanical properties using machine learning techniques. Int J Solids Struct 265:112126CrossRef Vyavahare S, Teraiya S, Kumar S (2023) FDM manufactured auxetic structures: An investigation of mechanical properties using machine learning techniques. Int J Solids Struct 265:112126CrossRef
123.
Zurück zum Zitat Tang K, Xiang Y, Tian J, Hou J, Chen X, Wang X, Zhong Z (2024) Machine learning-based morphological and mechanical prediction of kirigami-inspired active composites. Int J Mech Sci 266:108956CrossRef Tang K, Xiang Y, Tian J, Hou J, Chen X, Wang X, Zhong Z (2024) Machine learning-based morphological and mechanical prediction of kirigami-inspired active composites. Int J Mech Sci 266:108956CrossRef
124.
Zurück zum Zitat Li C, Shen H-S, Wang H (2021) Full-scale finite element modeling and nonlinear bending analysis of sandwich plates with functionally graded auxetic 3D lattice core. Journal of Sandwich Structures & Materials 23(7):3113–3138CrossRef Li C, Shen H-S, Wang H (2021) Full-scale finite element modeling and nonlinear bending analysis of sandwich plates with functionally graded auxetic 3D lattice core. Journal of Sandwich Structures & Materials 23(7):3113–3138CrossRef
125.
Zurück zum Zitat Oladipo B, Helio Matos NM, Krishnan A, Das S (2023) Integrating experiments, finite element analysis, and interpretable machine learning to evaluate the auxetic response of 3d printed re-entrant metamaterials. J Market Res 25:1612–1625 Oladipo B, Helio Matos NM, Krishnan A, Das S (2023) Integrating experiments, finite element analysis, and interpretable machine learning to evaluate the auxetic response of 3d printed re-entrant metamaterials. J Market Res 25:1612–1625
126.
Zurück zum Zitat Chang Y, Wang H, Dong Q (2022) Machine learning-based inverse design of auxetic metamaterial with zero Poisson’s ratio. Materials Today Communications 30:103186CrossRef Chang Y, Wang H, Dong Q (2022) Machine learning-based inverse design of auxetic metamaterial with zero Poisson’s ratio. Materials Today Communications 30:103186CrossRef
127.
Zurück zum Zitat Shen X, Qianran H, Zhu D, Qi S, Huang C, Yuan M, Qian X, Guo R (2024) Dynamic mechanical response prediction model of honeycomb structure based on machine learning method and finite element method. Int J Impact Eng 184:104825CrossRef Shen X, Qianran H, Zhu D, Qi S, Huang C, Yuan M, Qian X, Guo R (2024) Dynamic mechanical response prediction model of honeycomb structure based on machine learning method and finite element method. Int J Impact Eng 184:104825CrossRef
128.
Zurück zum Zitat Barati Mohammad Reza, Shahverdi Hossein (2022) "Vibration frequencies of meta-material plates based on the numerical calibration of shape factor for various cell patterns." Waves in Random and Complex Media 1-19 Barati Mohammad Reza, Shahverdi Hossein (2022) "Vibration frequencies of meta-material plates based on the numerical calibration of shape factor for various cell patterns." Waves in Random and Complex Media 1-19
129.
Zurück zum Zitat Francisco MB, Pereira JLJ, da Cunha Jr SS, Gomes GF (2023) Design optimization of a sandwich composite tube with auxetic core using multiobjective lichtenberg algorithm based on metamodelling. Eng Struct 281:115775CrossRef Francisco MB, Pereira JLJ, da Cunha Jr SS, Gomes GF (2023) Design optimization of a sandwich composite tube with auxetic core using multiobjective lichtenberg algorithm based on metamodelling. Eng Struct 281:115775CrossRef
130.
Zurück zum Zitat Rogers BA, Valentine MDA, Lunt AJG, Pegg EC, Dhokia V (2023) Optimization and experimental validation of 3D near-isotropic auxetic structures. Materials & Design 229:111844CrossRef Rogers BA, Valentine MDA, Lunt AJG, Pegg EC, Dhokia V (2023) Optimization and experimental validation of 3D near-isotropic auxetic structures. Materials & Design 229:111844CrossRef
131.
Zurück zum Zitat Wang L, Liu H-T (2021) Parameter optimization of bidirectional re-entrant auxetic honeycomb metamaterial based on genetic algorithm. Compos Struct 267:113915CrossRef Wang L, Liu H-T (2021) Parameter optimization of bidirectional re-entrant auxetic honeycomb metamaterial based on genetic algorithm. Compos Struct 267:113915CrossRef
132.
Zurück zum Zitat Li J, Pokkalla DK, Wang Z-P, Wang Y (2023) Deep learning-enhanced design for functionally graded auxetic lattices. Eng Struct 292:116477CrossRef Li J, Pokkalla DK, Wang Z-P, Wang Y (2023) Deep learning-enhanced design for functionally graded auxetic lattices. Eng Struct 292:116477CrossRef
133.
Zurück zum Zitat Zhang Chonghui, Zhao Yaoyao Fiona (2024) "A Critical Review on the Application of Machine Learning in Supporting Auxetic Metamaterial Design." Journal of Physics: Materials Zhang Chonghui, Zhao Yaoyao Fiona (2024) "A Critical Review on the Application of Machine Learning in Supporting Auxetic Metamaterial Design." Journal of Physics: Materials
134.
Zurück zum Zitat Jirousek O, Palar PS, Falta J, Dwianto YB (2023) Design exploration of additively manufactured chiral auxetic structure using explainable machine learning. Materials & Design 232:112128CrossRef Jirousek O, Palar PS, Falta J, Dwianto YB (2023) Design exploration of additively manufactured chiral auxetic structure using explainable machine learning. Materials & Design 232:112128CrossRef
135.
Zurück zum Zitat Malek S, Gibson L (2015) Effective elastic properties of periodic hexagonal honeycombs. Mech Mater 91:226–240CrossRef Malek S, Gibson L (2015) Effective elastic properties of periodic hexagonal honeycombs. Mech Mater 91:226–240CrossRef
136.
Zurück zum Zitat Yang, Li, Harrysson Ola, Cormier Denis, West Harvey, Park Chun, Peters Kara (2013) "Design of auxetic sandwich panels for structural applications." In 2013 International Solid Freeform Fabrication Symposium. University of Texas at Austin Yang, Li, Harrysson Ola, Cormier Denis, West Harvey, Park Chun, Peters Kara (2013) "Design of auxetic sandwich panels for structural applications." In 2013 International Solid Freeform Fabrication Symposium. University of Texas at Austin
137.
Zurück zum Zitat ASTM International. Standard test method for tensile properties of plastics. ASTM international, 2014 ASTM International. Standard test method for tensile properties of plastics. ASTM international, 2014
138.
Zurück zum Zitat Salari E, Vanini SS, Ashoori AR, Akbarzadeh AH (2020) Nonlinear thermal behavior of shear deformable FG porous nanobeams with geometrical imperfection: Snap-through and postbuckling analysis. Int J Mech Sci 178:105615CrossRef Salari E, Vanini SS, Ashoori AR, Akbarzadeh AH (2020) Nonlinear thermal behavior of shear deformable FG porous nanobeams with geometrical imperfection: Snap-through and postbuckling analysis. Int J Mech Sci 178:105615CrossRef
139.
Zurück zum Zitat Wang CM, Reddy JN, Lee KH eds., (2000) Shear deformable beams and plates: Relationships with classical solutions. Elsevier Wang CM, Reddy JN, Lee KH eds., (2000) Shear deformable beams and plates: Relationships with classical solutions. Elsevier
140.
Zurück zum Zitat Reddy Junuthula Narasimha (2015) An Introduction to Nonlinear Finite Element Analysis: with applications to heat transfer, fluid mechanics, and solid mechanics. Oxford university press Reddy Junuthula Narasimha (2015) An Introduction to Nonlinear Finite Element Analysis: with applications to heat transfer, fluid mechanics, and solid mechanics. Oxford university press
141.
Zurück zum Zitat Hunter JD (2007) Matplotlib: A 2D graphics environment. Computing in science & engineering 9(03):90–95CrossRef Hunter JD (2007) Matplotlib: A 2D graphics environment. Computing in science & engineering 9(03):90–95CrossRef
142.
Zurück zum Zitat Fang Xi, Shen Hui-Shen, Wang Hai (2023) "Diverse 3D auxetic unit cell inverse design with deep learning." Applied Physics Reviews 10, no. 3 Fang Xi, Shen Hui-Shen, Wang Hai (2023) "Diverse 3D auxetic unit cell inverse design with deep learning." Applied Physics Reviews 10, no. 3
143.
Zurück zum Zitat Jodaei A, Jalal M, Yas MH (2012) Free vibration analysis of functionally graded annular plates by state-space based differential quadrature method and comparative modeling by ANN. Compos B Eng 43(2):340–353CrossRef Jodaei A, Jalal M, Yas MH (2012) Free vibration analysis of functionally graded annular plates by state-space based differential quadrature method and comparative modeling by ANN. Compos B Eng 43(2):340–353CrossRef
144.
Zurück zum Zitat Nguyen T-A, Ly H-B, Mai H-VT, Tran VQ (2021) Using ANN to Estimate the Critical Buckling Load of Y Shaped Cross-Section Steel Columns. Sci Program 2021(1):5530702 Nguyen T-A, Ly H-B, Mai H-VT, Tran VQ (2021) Using ANN to Estimate the Critical Buckling Load of Y Shaped Cross-Section Steel Columns. Sci Program 2021(1):5530702
145.
Zurück zum Zitat Xu Y, Weng H, Xiaozhe J, Ruan H, Chen J, Nan C, Guo J, Liang L (2021) A method for predicting mechanical properties of composite microstructure with reduced dataset based on transfer learning. Compos Struct 275:114444CrossRef Xu Y, Weng H, Xiaozhe J, Ruan H, Chen J, Nan C, Guo J, Liang L (2021) A method for predicting mechanical properties of composite microstructure with reduced dataset based on transfer learning. Compos Struct 275:114444CrossRef
146.
Zurück zum Zitat Chen Tianqi, Guestrin Carlos (2016) "Xgboost: A scalable tree boosting system." In Proceedings of the 22nd acm sigkdd international conference on knowledge discovery and data mining, pp. 785-794 Chen Tianqi, Guestrin Carlos (2016) "Xgboost: A scalable tree boosting system." In Proceedings of the 22nd acm sigkdd international conference on knowledge discovery and data mining, pp. 785-794
147.
Zurück zum Zitat Breiman Leo, Cutler A (2003) "Setting Up." Using, And Understanding Random Forests 4 Breiman Leo, Cutler A (2003) "Setting Up." Using, And Understanding Random Forests 4
148.
Zurück zum Zitat Prokhorenkova Liudmila, Gusev Gleb, Vorobev Aleksandr, Dorogush Anna Veronika, Gulin Andrey (2018) "CatBoost: unbiased boosting with categorical features." Advances in neural information processing systems 31 Prokhorenkova Liudmila, Gusev Gleb, Vorobev Aleksandr, Dorogush Anna Veronika, Gulin Andrey (2018) "CatBoost: unbiased boosting with categorical features." Advances in neural information processing systems 31
149.
Zurück zum Zitat Mehlig Bernhard (2021) Machine learning with neural networks: an introduction for scientists and engineers. Cambridge University Press Mehlig Bernhard (2021) Machine learning with neural networks: an introduction for scientists and engineers. Cambridge University Press
150.
Zurück zum Zitat She G-L, Yuan F-G, Ren Y-R (2017) Nonlinear analysis of bending, thermal buckling and post-buckling for functionally graded tubes by using a refined beam theory. Compos Struct 165:74–82CrossRef She G-L, Yuan F-G, Ren Y-R (2017) Nonlinear analysis of bending, thermal buckling and post-buckling for functionally graded tubes by using a refined beam theory. Compos Struct 165:74–82CrossRef
151.
Zurück zum Zitat Babaei H, Kiani Y, Reza Eslami M (2019) Buckling and post-buckling analysis of geometrically imperfect FGM pin-ended tubes surrounded by nonlinear elastic medium under compressive and thermal loads. Int J Struct Stab Dyn 19(08):1950089MathSciNetCrossRef Babaei H, Kiani Y, Reza Eslami M (2019) Buckling and post-buckling analysis of geometrically imperfect FGM pin-ended tubes surrounded by nonlinear elastic medium under compressive and thermal loads. Int J Struct Stab Dyn 19(08):1950089MathSciNetCrossRef
152.
Zurück zum Zitat Sorohan S, Constantinescu DM, Sandu M, Sandu AG (2018) On the homogenization of hexagonal honeycombs under axial and shear loading. Part I: Analytical formulation for free skin effect. Mech Mater 119:74–91CrossRef Sorohan S, Constantinescu DM, Sandu M, Sandu AG (2018) On the homogenization of hexagonal honeycombs under axial and shear loading. Part I: Analytical formulation for free skin effect. Mech Mater 119:74–91CrossRef
Metadaten
Titel
Integrating analytical and machine learning methods for investigating nonlinear bending and post-buckling behavior of 3D-printed auxetic tubes
verfasst von
Fatemeh Ghasemi
Erfan Salari
Arshia Salari
Abbas Rastgoo
Deli Li
Jian Deng
Publikationsdatum
15.12.2024
Verlag
Springer London
Erschienen in
Engineering with Computers
Print ISSN: 0177-0667
Elektronische ISSN: 1435-5663
DOI
https://doi.org/10.1007/s00366-024-02091-y