nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Integration of Augmented, Virtual and Mixed Reality with Building Information Modeling: A Systematic Review

verfasst von : Ahlem Assila, Amira Dhouib, Ziad Monla, Mourad Zghal

Erschienen in: Virtual, Augmented and Mixed Reality: Design and Development

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Thanks to the digital revolution, the construction industry has seen a recognizable evolution, where the world has been heading towards modern constructions based on the use of Building Information Modeling (BIM). This evolution was marked by the integration of this paradigm with immersive technologies like Virtual Reality (VR), Augmented Reality (AR), and Mixed Reality (MR). During the last few years, the development of BIM started to emerge. This paper proposes a Systematic Literature Review (SLR) of recent studies about the integration of BIM with immersive environments using VR/AR/MR technologies. Four electronic databases were exploited to search for eligible studies, namely: Google Scholar, ACM Digital Library, IEEE Xplore, and Science direct. From an initial cohort of 239 studies, 28 were retained for analysis. The main findings of this review have been focused on stages of the projects’ life cycle in which the immersive technologies are being implemented, approaches/techniques used to ensure the integration of BIM with the three immersive technologies, along with the current limitations and perspectives.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Visualization of Macroscopic Structure of Ultra-high Performance Concrete Based on X-ray Computed Tomography Using Immersive Environments

Carneiro, J., Rossetti, R.J.F., Silva, D.C., Oliveira, E.C.: BIM, GIS, IoT, and AR/VR integration for smart maintenance and management of road networks: a review. In: 2018 IEEE International Smart Cities Conference (ISC2), pp. 1–7. IEEE, Kansas City, MO, USA (2018). https://doi.org/10.1109/ISC2.2018.8656978.

Schweigkofler, A., et al.: Development of a digital platform based on the integration of augmented reality and bim for the management of information in construction processes. In: Chiabert, P., Bouras, A., Noël, F., Ríos, J. (eds.) Product Lifecycle Management to Support Industry 4.0. pp. 46–55. Springer International Publishing, Cham (2018). https://doi.org/10.1007/978-3-030-01614-2_5.

Karji, A., Woldesenbet, A., Rokooei, S.: Integration of augmented reality, building information modeling, and image processing in construction management: a content analysis. In: AEI 2017. pp. 983–992. American Society of Civil Engineers, Oklahoma City, Oklahoma (2017). https://doi.org/10.1061/9780784480502.082.

Assila, A., Beladjine, D., Messaadia, M.: Towards AR/VR maturity model adapted to the building information modeling. In: Nyffenegger, F., Ríos, J., Rivest, L., Bouras, A. (eds.) Product Lifecycle Management Enabling Smart X, pp. 753–765. Springer International Publishing, Cham (2020). https://doi.org/10.1007/978-3-030-62807-9_59.

Sidani, A., et al.: Recent tools and techniques of BIM-based virtual reality: a systematic review. Arch Computat Methods Eng. 28, 449–462 (2021). https://doi.org/10.1007/s11831-019-09386-0CrossRef

Gattullo, M., Scurati, G.W., Fiorentino, M., Uva, A.E., Ferrise, F., Bordegoni, M.: Towards augmented reality manuals for industry 4.0: A methodology. Robotics and Comput.-Integrated Manuf. 56, 276-286 (2019). https://doi.org/10.1016/j.rcim.2018.10.001.

de Almeida Pacheco, B., Guimarães, M., Correa, A.G., Farinazzo Martins, V.: Usability evaluation of learning objects with augmented reality for smartphones: a reinterpretation of nielsen heuristics. In: Agredo-Delgado, V., Ruiz, P.H. (eds.) Human-Computer Interaction, pp. 214–228. Springer International Publishing, Cham (2019). https://doi.org/10.1007/978-3-030-05270-6_16.

Assila, A., Plouzeau, J., Merienne, F., Erfanian, A., Hu, Y.: Defining an indicator for navigation performance measurement in VE Based on ISO/IEC15939. In: De Paolis, L.T., Bourdot, P., Mongelli, A. (eds.) Augmented Reality, Virtual Reality, and Computer Graphics, pp. 17–34. Springer International Publishing, Cham (2017). https://doi.org/10.1007/978-3-319-60922-5_2.

Moreira, L.C. de S., Mota, P.P., Machado, F.A.: BIM, IoT and MR integration applied on risk maps for construction. In: Toledo Santos, E., Scheer, S. (eds.) Proceedings of the 18th International Conference on Computing in Civil and Building Engineering, pp. 895–906. Springer International Publishing, Cham (2021). https://doi.org/10.1007/978-3-030-51295-8_62.

10.

Alizadehsalehi, S., Hadavi, A., Huang, J.C.: BIM/MR-lean construction project delivery management system. In: 2019 IEEE Technology & Engineering Management Conference (TEMSCON), pp. 1–6. IEEE, Atlanta, GA, USA (2019). https://doi.org/10.1109/TEMSCON.2019.8813574.

11.

Sidani, A., et al.: Recent tools and techniques of BIM-based augmented reality: a systematic review. J. Building Eng. 42, 102500 (2021). https://doi.org/10.1016/j.jobe.2021.102500CrossRef

12.

Kitchenham, B., Charters, S.: Guidelines for performing Systematic Literature review in software engineering version 2.3, Engineering, 45(4), 1051 (2007)

13.

Chai, C., Mustafa, K., Kuppusamy, S., Yusof, A., Lim, C.S., Wai, S.H.: BIM Integration in Augmented Reality Model. IJTech. 10(7), 1266 (2019). https://doi.org/10.14716/ijtech.v10i7.3278.

14.

Olanrewaju, O.I., Kineber, A.F., Chileshe, N., Edwards, D.J.: Modelling the impact of building information modelling (BIM) implementation drivers and awareness on project lifecycle. Sustainability. 13, 8887 (2021). https://doi.org/10.3390/su13168887CrossRef

15.

Olanrewaju, O., Ajiboye Babarinde, S., Salihu, C.: Current state of building information modelling in the nigerian construction industry. J. Sustain. Archit. Civ. Eng. 27, 63–77 (2020). https://doi.org/10.5755/j01.sace.27.2.25142CrossRef

16.

Graf, H., Soubra, S., Picinbono, G., Keough, I., Tessier, A., Khan, A.: Lifecycle building card: toward paperless and visual lifecycle management tools. In: SpringSim (SimAUD), pp. 5–12 (2011)

17.

Kahn, S., et al.: Beyond 3D “as-built” information using mobile ar enhancing the building lifecycle management. In: 2012 International Conference on Cyberworlds, pp. 29–36. IEEE, Darmstadt, Germany (2012). https://doi.org/10.1109/CW.2012.12.

18.

Wang, X., Love, P.E.D., Kim, M.J., Park, C.-S., Sing, C.-P., Hou, L.: A conceptual framework for integrating building information modeling with augmented reality. Autom. Constr. 34, 37–44 (2013). https://doi.org/10.1016/j.autcon.2012.10.012CrossRef

19.

Jiao, Y., Zhang, S., Li, Y., Wang, Y., Yang, B.: Towards cloud augmented reality for construction application by BIM and SNS integration. Autom. Constr. 33, 37–47 (2013). https://doi.org/10.1016/j.autcon.2012.09.018CrossRef

20.

Wang, X., Truijens, M., Ding, L., Hou, L., Wang, Y., Lavender, M.: Integrating building information modelling and augmented reality for construction projects in oil and gas industry. In: Proceedings of the 19th CIB World Building Congress, Brisbane 2013: Construction and Society, pp. 1–2. RMIT University.

21.

Wang, J., Wang, X., Shou, W., Xu, B.: Integrating BIM and augmented reality for interactive architectural visualisation. Constr. Innov. 14, 453–476 (2014). https://doi.org/10.1108/CI-03-2014-0019CrossRef

22.

Chen, H.-M., Chang, T.-Y.: Integration of augmented reality and indoor positioning technologies for on-site viewing of BIM information. In: Presented at the 31st International Symposium on Automation and Robotics in Construction , Sydney, Australia July 8 (2014). https://doi.org/10.22260/ISARC2014/0082.

23.

Hatem, W.A., Maula, B.H.: Improving project monitoring by integrating BIM with Augmented Reality. IRECE. 11(6), 304 (2020). https://doi.org/10.15866/irece.v11i6.19358.

24.

Liu, Y.-C., Chen, J.-R., Chen, H.-M.: System development of an augmented reality on-site BIM viewer based on the integration of SLAM and BLE indoor positioning. In: Presented at the 37th International Symposium on Automation and Robotics in Construction , Kitakyushu, Japan October 14 (2020). https://doi.org/10.22260/ISARC2020/0042.

25.

Dudhee, V., Vukovic, V.: Integration of building information modelling and augmented reality for building energy systems visualisation. In: Energy and Sustainable Futures, pp. 83–89 (2021). Springer, Cham. https://doi.org/10.1007/978-3-030-63916-7_11

26.

Wang, S.-K., Chen, H.-M.: A construction progress on-site monitoring and presentation system based on the integration of augmented reality and BIM. In: Presented at the 37th International Symposium on Automation and Robotics in Construction , Kitakyushu, Japan October 14 (2020). https://doi.org/10.22260/ISARC2020/0023.

27.

Petrova, E., Rasmussen, M., Jensen, R.L., Svidt, K.: Integrating virtual reality and BIM for end-user involvement in building design: a case study. In: Joint Conference on Computing in Construction (JC3), pp. 699–709 (2017)

28.

Johansson, M., Roupé, M., Viklund Tallgren, M.: From BIM to VR - Integrating immersive visualizations in the current design process. In: Fusion-Proceeding of the 32nd eCAADe Conference-Volume 2 (eCAADe 2014), pp. 261–269 (2014)

29.

Sun, T., Xu, Z., Yuan, J., Liu, C., Ren, A.: Virtual experiencing and pricing of room views based on bim and oblique photogrammetry. Procedia Eng. 196, 1122–1129 (2017). https://doi.org/10.1016/j.proeng.2017.08.071CrossRef

30.

Chen, L., Wang, J.: Application research of virtual reality technology in green building design. In: 2020 5th International Conference on Smart Grid and Electrical Automation (ICSGEA), pp. 249–253. IEEE, Zhangjiajie, China (2020). https://doi.org/10.1109/ICSGEA51094.2020.00060.

31.

Getuli, V., Capone, P., Bruttini, A., Isaac, S.: BIM-based immersive Virtual Reality for construction workspace planning: a safety-oriented approach. Autom. Constr. 114, 103160 (2020). https://doi.org/10.1016/j.autcon.2020.103160CrossRef

32.

Xu, S., Fu, D., Xie, Y., Hou, L., Bu, S.: Integrating BIM and VR for highway construction site layout planning. In: CICTP 2020. American Society of Civil Engineers, Xi’an, China (Conference Cancelled), pp. 1068–1079 (2020). https://doi.org/10.1061/9780784482933.093.

33.

Lin, C.-C., Hsu, L.-Y., Tung, S.-H., Gao, R.-J., Wu, S.-M., Wang, K.-C.: Integrate BIM and virtual reality to assist construction visual marketing. In: 2020 IEEE 2nd International Conference on Architecture, Construction, Environment and Hydraulics (ICACEH), pp. 28–31. IEEE, Hsinchu, Taiwan (2020). https://doi.org/10.1109/ICACEH51803.2020.9366260.

34.

Akanmu, A.A., Olayiwola, J., Olatunji, O.A.: Automated checking of building component accessibility for maintenance. Autom. Constr. 114, 103196 (2020). https://doi.org/10.1016/j.autcon.2020.103196CrossRef

35.

Pour Rahimian, F., Seyedzadeh, S., Oliver, S., Rodriguez, S., Dawood, N.: On-demand monitoring of construction projects through a game-like hybrid application of BIM and machine learning. Autom. Constr. 110, 103012 (2020). https://doi.org/10.1016/j.autcon.2019.103012CrossRef

36.

Davidson, J., et al.: Integration of VR with BIM to facilitate real-time creation of bill of quantities during the design phase: a proof of concept study. Front. Eng. Manag. 7, 396–403 (2020). https://doi.org/10.1007/s42524-019-0039-yCrossRef

37.

Patti, E., et al.: Information modeling for virtual and augmented reality. IT Prof. 19, 52–60 (2017). https://doi.org/10.1109/MITP.2017.43CrossRef

38.

El Ammari, K., Hammad, A.: Remote interactive collaboration in facilities management using BIM-based mixed reality. Autom. Constr. 107, 102940 (2019). https://doi.org/10.1016/j.autcon.2019.102940CrossRef

39.

Prabhakaran, A., Mahamadu, A.-M., Mahdjoubi, L., Manu, P.: An approach for integrating mixed reality into BIM for early stage design coordination. MATEC Web Conf. 312, 04001 (2020). https://doi.org/10.1051/matecconf/202031204001CrossRef

40.

Cheng, J.C.P., Chen, K., Chen, W.: Comparison of Marker-Based and Markerless AR: A case study of an indoor decoration system. In: Lean and Computing in Construction Congress - Volume 1: Proceedings of the Joint Conference on Computing in Construction, pp. 483–490. Heriot-Watt University, Heraklion, Crete, Greece (2017). https://doi.org/10.24928/JC3-2017/0231.

41.

Jeginovic, S., Rizvic, S., Chalmers, A.: Interactive 3D models – From 3ds max to VRML. In: Proceedings of 8th Central European Seminar on Computer Graphics (CESCG 2004), Budmerice Castle, Slovakia (2004).

42.

Davila Delgado, J.M., Oyedele, L., Beach, T., Demian, P.: Augmented and virtual reality in construction: drivers and limitations for industry adoption. J. Constr. Eng. Manag. 146, 04020079 (2020). https://doi.org/10.1061/(ASCE)CO.1943-7862.0001844CrossRef

43.

Azhar, S.: Role of visualization technologies in safety planning and management at construction jobsites. Procedia Eng. 171, 215–226 (2017). https://doi.org/10.1016/j.proeng.2017.01.329CrossRef

Titel: Integration of Augmented, Virtual and Mixed Reality with Building Information Modeling: A Systematic Review
verfasst von: Ahlem Assila
Amira Dhouib
Ziad Monla
Mourad Zghal
Verlag: Springer International Publishing
Buch: Virtual, Augmented and Mixed Reality: Design and Development
Print ISBN: 978-3-031-05938-4

Electronic ISBN: 978-3-031-05939-1

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-031-05939-1_1

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"