Skip to main content
Erschienen in: Journal of Materials Science 17/2019

05.04.2019 | Review

Interface formation and bonding mechanisms of hot-rolled stainless steel clad plate

verfasst von: B. X. Liu, Q. An, F. X. Yin, S. Wang, C. X. Chen

Erschienen in: Journal of Materials Science | Ausgabe 17/2019

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Since the 1980s, vacuum hot rolling has been developed to fabricate the stainless steel clad plates by the Iron and Steel Institute of Japan. Herein, hot rolling is a widely used solid-state bonding process to join the carbon steel substrate and stainless steel cladding. In this paper, we provide a brief overview of the vacuum hot rolling process and effective parameters on the interface characteristics and shear strength of stainless steel clad plate. The effects of surface preparation condition, atmosphere condition, vacuum degree, rolling temperature, rolling reduction ratio, interlayer, heat treatment on the microstructure, interface characteristics and mechanical properties of stainless steel clad plate have been analyzed in detail. It is shown that the interface transition zone is formed due to the carbon diffusion, and the strong interface bonding is attributed to the sufficient alloy elements diffusion of Fe, Cr and Ni. Moreover, the interface shear strength and toughness are also affected by interfacial precipitation phase and multiple oxides. Finally, the present work concluded the bonding mechanism of hot-rolled stainless steel clad based on the oxide film theory, diffusion theory, recrystallization theory and three stage theory.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Smith L (2012) Engineering with clad steel. Nickel Institute Technical Series, Beijing, pp 1–23 Smith L (2012) Engineering with clad steel. Nickel Institute Technical Series, Beijing, pp 1–23
2.
Zurück zum Zitat Liu BX, Yin FX, Dai XL, He JN, Fang W, Chen CX, Dong YC (2017) The tensile behaviors and fracture characteristics of stainless steel clad plates with different interfacial status. Mater Sci Eng, A 679:172–182 Liu BX, Yin FX, Dai XL, He JN, Fang W, Chen CX, Dong YC (2017) The tensile behaviors and fracture characteristics of stainless steel clad plates with different interfacial status. Mater Sci Eng, A 679:172–182
3.
Zurück zum Zitat Song H, Shin H, Shin Y (2016) Heat treatment of clad steel plate for application of hull structure. Ocean Eng 122:278–287 Song H, Shin H, Shin Y (2016) Heat treatment of clad steel plate for application of hull structure. Ocean Eng 122:278–287
4.
Zurück zum Zitat Zhu ZC, He Y, Zhang XJ, Liu HY, Li X (2016) Effect of interface oxides on shear properties of hot-rolled stainless steel clad plate. Mater Sci Eng, A 669:344–349 Zhu ZC, He Y, Zhang XJ, Liu HY, Li X (2016) Effect of interface oxides on shear properties of hot-rolled stainless steel clad plate. Mater Sci Eng, A 669:344–349
5.
Zurück zum Zitat Fang J, Li YZ (2012) Process optimization for welding stainless steel clad material based on orthotropic bridge plates. Appl Mech Mater 178–181:2066–2069 Fang J, Li YZ (2012) Process optimization for welding stainless steel clad material based on orthotropic bridge plates. Appl Mech Mater 178–181:2066–2069
6.
Zurück zum Zitat Miki C, Homma K, Tominaga T (2002) High strength and high performance steels and their use in bridge structure. J Constr Steel Res 58:3–20 Miki C, Homma K, Tominaga T (2002) High strength and high performance steels and their use in bridge structure. J Constr Steel Res 58:3–20
7.
Zurück zum Zitat Su H, Luo XB, Chai F, Shen JC, Sun XJ, Lu F (2015) Manufacturing technology and application trends of titanium clad steel plates. J Iron Steel Res Int 22:977–982 Su H, Luo XB, Chai F, Shen JC, Sun XJ, Lu F (2015) Manufacturing technology and application trends of titanium clad steel plates. J Iron Steel Res Int 22:977–982
8.
Zurück zum Zitat Ye Y, Zhang SJ, Han LH, Liu Y (2018) Square concrete-filled stainless steel/carbon steel bimetallic tubular stub columns under axial compression. J Constr Steel Res 146:49–62 Ye Y, Zhang SJ, Han LH, Liu Y (2018) Square concrete-filled stainless steel/carbon steel bimetallic tubular stub columns under axial compression. J Constr Steel Res 146:49–62
9.
Zurück zum Zitat Marques MJ, Ramasamy A, Batusta AC, Nobre JP, Loureiro A (2015) Effect of heat treatment on microstrucutre and residual stress fields of a weld multilayer austenitic steel clad. J Mater Process Technol 222:52–60 Marques MJ, Ramasamy A, Batusta AC, Nobre JP, Loureiro A (2015) Effect of heat treatment on microstrucutre and residual stress fields of a weld multilayer austenitic steel clad. J Mater Process Technol 222:52–60
10.
Zurück zum Zitat Zhang LJ, Pei Q, Zhang JX, Bi ZY, Li PC (2014) Study on the microstructure and mechanical properties of explosive welded 2205/x65 bimetallic sheet. Mater Des 64:462–476 Zhang LJ, Pei Q, Zhang JX, Bi ZY, Li PC (2014) Study on the microstructure and mechanical properties of explosive welded 2205/x65 bimetallic sheet. Mater Des 64:462–476
11.
Zurück zum Zitat Mendes R, Ribeiro JB, Loureiro A (2013) Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration. Mater Des 51:182–192 Mendes R, Ribeiro JB, Loureiro A (2013) Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration. Mater Des 51:182–192
12.
Zurück zum Zitat Satya Prasad VV, Madhusudhan Reddy G (2012) Microstructure and mechanical properties of electroslag strip and explosively clad low alloy steel: stainless steel joints. Trans Indian Inst Met 65:135–143 Satya Prasad VV, Madhusudhan Reddy G (2012) Microstructure and mechanical properties of electroslag strip and explosively clad low alloy steel: stainless steel joints. Trans Indian Inst Met 65:135–143
13.
Zurück zum Zitat Yazdani M, Toroghinejad MR, Hashemi SM (2016) Effects of heat treatment on interface microstructure and mechanical properties of explosively welded Ck60/St37 plates. J Mater Eng Perform 25:5330–5342 Yazdani M, Toroghinejad MR, Hashemi SM (2016) Effects of heat treatment on interface microstructure and mechanical properties of explosively welded Ck60/St37 plates. J Mater Eng Perform 25:5330–5342
14.
Zurück zum Zitat Niederhauser S, Karlsson B (2003) Mechanical properties of laser cladded steel. Mater Sci Technol 19:1611–1616 Niederhauser S, Karlsson B (2003) Mechanical properties of laser cladded steel. Mater Sci Technol 19:1611–1616
15.
Zurück zum Zitat Pongmorakot K, Nambu S, Koseki T (2018) Effects of compressive strain on the evolution of interfacial strength of steel/nickel solid-state bonding at low temperature. Sci Technol Weld Join 23:344–350 Pongmorakot K, Nambu S, Koseki T (2018) Effects of compressive strain on the evolution of interfacial strength of steel/nickel solid-state bonding at low temperature. Sci Technol Weld Join 23:344–350
16.
Zurück zum Zitat Pongmorakot K, Nambu S, Shibuta Y, Koseki T (2017) Investigation on the mechanism of steel/steel solid-state bonding at low temperatures. Sci Technol Weld Join 22:257–263 Pongmorakot K, Nambu S, Shibuta Y, Koseki T (2017) Investigation on the mechanism of steel/steel solid-state bonding at low temperatures. Sci Technol Weld Join 22:257–263
17.
Zurück zum Zitat Xu W, Sun X (2016) Numerical investigation of electromagnetic pulse welded interfaces between dissimilar metals. Sci Technol Weld Join 21:592–599 Xu W, Sun X (2016) Numerical investigation of electromagnetic pulse welded interfaces between dissimilar metals. Sci Technol Weld Join 21:592–599
18.
Zurück zum Zitat Chen KK, Zhang YS, Wang HZ (2017) Study of plastic deformation and interface friction process for ultrasonic welding. Sci Technol Weld Join 22:208–216 Chen KK, Zhang YS, Wang HZ (2017) Study of plastic deformation and interface friction process for ultrasonic welding. Sci Technol Weld Join 22:208–216
19.
Zurück zum Zitat Tanaka T, Fukuchi Y (1983) Fatigue crack propagation behavior of two-layered low carbon steel-stainless steel composite plates. Bull JSME 26:1273–1280 Tanaka T, Fukuchi Y (1983) Fatigue crack propagation behavior of two-layered low carbon steel-stainless steel composite plates. Bull JSME 26:1273–1280
20.
Zurück zum Zitat Honda K, Torii T (1981) Study on fatigue fracture of laminated inhomogeneous metals (in quenched clad plates of low carbon steel and middle carbon steel). Bull JSME 24:468–474 Honda K, Torii T (1981) Study on fatigue fracture of laminated inhomogeneous metals (in quenched clad plates of low carbon steel and middle carbon steel). Bull JSME 24:468–474
21.
Zurück zum Zitat Wang S, Liu BX, Chen CX, Feng JH, Yin FX (2018) Microstructure, mechanical properties and interface bonding mechanism of hot-rolled stainless steel clad plates at different rolling reduction ratios. J Alloy Compd 766:517–526 Wang S, Liu BX, Chen CX, Feng JH, Yin FX (2018) Microstructure, mechanical properties and interface bonding mechanism of hot-rolled stainless steel clad plates at different rolling reduction ratios. J Alloy Compd 766:517–526
22.
Zurück zum Zitat Xie GM, Luo ZG, Wang GL, Li L, Wang GD (2011) Interface characteristic and properties of stainless steel/HSLA steel clad plate by vacuum rolling cladding. Mater Trans 52:1709–1712 Xie GM, Luo ZG, Wang GL, Li L, Wang GD (2011) Interface characteristic and properties of stainless steel/HSLA steel clad plate by vacuum rolling cladding. Mater Trans 52:1709–1712
23.
Zurück zum Zitat Li L, Yin FX, Nagai K (2011) Progress of laminated materials and clad steels production. Mater Sci Forum 675–677:439–447 Li L, Yin FX, Nagai K (2011) Progress of laminated materials and clad steels production. Mater Sci Forum 675–677:439–447
24.
Zurück zum Zitat Tachibana S, Koronuma Y, Yokota T, Yamada K, Moriya Y, Kami C (2015) Effect of hot rolling and cooling conditions on intergranular corrosion behavior in alloy625 clad steel. Corros Sci 99:125–133 Tachibana S, Koronuma Y, Yokota T, Yamada K, Moriya Y, Kami C (2015) Effect of hot rolling and cooling conditions on intergranular corrosion behavior in alloy625 clad steel. Corros Sci 99:125–133
25.
Zurück zum Zitat Li L, Nagai K, Yin FX (2008) Progress in cold roll bonding of metals. Sci Technol Adv Mater 9:1–11 Li L, Nagai K, Yin FX (2008) Progress in cold roll bonding of metals. Sci Technol Adv Mater 9:1–11
26.
Zurück zum Zitat Chen CX, Liu MY, Liu BX, Yin FX, Dong YC, Zhang X, Zhang FY, Zhang YG (2017) Tensile shear sample design and interfacial shear strength of stainless steel clad plate. Fusion Eng Des 125:431–441 Chen CX, Liu MY, Liu BX, Yin FX, Dong YC, Zhang X, Zhang FY, Zhang YG (2017) Tensile shear sample design and interfacial shear strength of stainless steel clad plate. Fusion Eng Des 125:431–441
27.
Zurück zum Zitat Bouaziz O, Masse JP, Petitgand G, Huang MX (2016) A novel strong and ductile TWIP/Martensite steel composite. Adv Eng Mater 18:56–59 Bouaziz O, Masse JP, Petitgand G, Huang MX (2016) A novel strong and ductile TWIP/Martensite steel composite. Adv Eng Mater 18:56–59
28.
Zurück zum Zitat Jiang WC, Xu XP, Gong JM, Tu ST (2012) Influence of repair length on residual stress in the repair weld of a clad plate. Nucl Eng Des 246:211–219 Jiang WC, Xu XP, Gong JM, Tu ST (2012) Influence of repair length on residual stress in the repair weld of a clad plate. Nucl Eng Des 246:211–219
29.
Zurück zum Zitat Jiang F, Deng ZL, Zhao K, Sun J (2003) Fatigue crack propagation normal to a plasticity mismatched biomaterial interface. Mater Sci Eng, A 356:258–266 Jiang F, Deng ZL, Zhao K, Sun J (2003) Fatigue crack propagation normal to a plasticity mismatched biomaterial interface. Mater Sci Eng, A 356:258–266
30.
Zurück zum Zitat Nambu S, Michiuchi M, Inoue J, Koseki T (2009) Effect of interfacial bonding strength on the tensile ductility of multilayered steel composites. Compos Sci Technol 69:1936–1941 Nambu S, Michiuchi M, Inoue J, Koseki T (2009) Effect of interfacial bonding strength on the tensile ductility of multilayered steel composites. Compos Sci Technol 69:1936–1941
31.
Zurück zum Zitat Missori S, Murdolo F, Sili A (2004) Single-pass laser beam welding of clad steel plate. Weld J 83:65–71 Missori S, Murdolo F, Sili A (2004) Single-pass laser beam welding of clad steel plate. Weld J 83:65–71
32.
Zurück zum Zitat Dhib Z, Guermazi N, Gasperini M, Haddar N (2016) Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: microstructure and mechanical properties before and after welding. Mater Sci Eng, A 656:130–141 Dhib Z, Guermazi N, Gasperini M, Haddar N (2016) Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: microstructure and mechanical properties before and after welding. Mater Sci Eng, A 656:130–141
33.
Zurück zum Zitat Rees DWA, Power RK (1994) Forming limits in a clad steel. J Mater Process Technol 45:571–575 Rees DWA, Power RK (1994) Forming limits in a clad steel. J Mater Process Technol 45:571–575
34.
Zurück zum Zitat Li HB, Chen J, Yang J (2013) Experiment and numerical simulation on delamination during the laminated steel sheet forming processes. Int J Adv Manuf Technol 68:641–649 Li HB, Chen J, Yang J (2013) Experiment and numerical simulation on delamination during the laminated steel sheet forming processes. Int J Adv Manuf Technol 68:641–649
35.
Zurück zum Zitat Dhib Z, Guermazi N, Ktari A, Gasperini M, Haddar N (2017) Mechanical bonding properties and interfacial morphologies of austenitic stainless steel clad plates. Mater Sci Eng, A 696:374–386 Dhib Z, Guermazi N, Ktari A, Gasperini M, Haddar N (2017) Mechanical bonding properties and interfacial morphologies of austenitic stainless steel clad plates. Mater Sci Eng, A 696:374–386
36.
Zurück zum Zitat Atrian A, Fereshteh-Saniee F (2013) Deep drawing process of steel/brass laminated sheets. Compos Part B 47:75–81 Atrian A, Fereshteh-Saniee F (2013) Deep drawing process of steel/brass laminated sheets. Compos Part B 47:75–81
37.
Zurück zum Zitat Liu BX, Huang LJ, Geng L, Wang B, Cui XP, Liu C, Wang GS (2013) Microstructure and tensile behavior of novel laminated Ti–TiBw/Ti composites by reaction hot pressing. Mater Sci Eng, A 583:182–187 Liu BX, Huang LJ, Geng L, Wang B, Cui XP, Liu C, Wang GS (2013) Microstructure and tensile behavior of novel laminated Ti–TiBw/Ti composites by reaction hot pressing. Mater Sci Eng, A 583:182–187
38.
Zurück zum Zitat Liu BX, Huang LJ, Kaveendran B, Geng L, Cui XP, Wei SL, Yin FX (2017) Tensile and bending behaviors and characteristics of laminated Ti–(TiBw/Ti) composites with different interface status. Compos B 108:377–385 Liu BX, Huang LJ, Kaveendran B, Geng L, Cui XP, Wei SL, Yin FX (2017) Tensile and bending behaviors and characteristics of laminated Ti–(TiBw/Ti) composites with different interface status. Compos B 108:377–385
39.
Zurück zum Zitat Liu BX, Huang LJ, Geng L, Wang B, Liu C, Zhang WC (2014) Fabrication and superior of laminated Ti–TiBw/Ti composites by diffusion welding. J Alloy Compd 602:187–192 Liu BX, Huang LJ, Geng L, Wang B, Liu C, Zhang WC (2014) Fabrication and superior of laminated Ti–TiBw/Ti composites by diffusion welding. J Alloy Compd 602:187–192
40.
Zurück zum Zitat Kum DW, Oyama T, Wadsworth J, Sherby OD (1983) The impact properties of laminated composites containing ultrahigh carbon (UHC) steels. J Mech Phys Solids 31:173–186 Kum DW, Oyama T, Wadsworth J, Sherby OD (1983) The impact properties of laminated composites containing ultrahigh carbon (UHC) steels. J Mech Phys Solids 31:173–186
41.
Zurück zum Zitat Liu BX, Huang LJ, Rong XD, Geng L, Yin FX (2016) Bending behaviors and fracture characteristics of laminated ductile-tough composites under different modes. Compos Sci Technol 126:94–105 Liu BX, Huang LJ, Rong XD, Geng L, Yin FX (2016) Bending behaviors and fracture characteristics of laminated ductile-tough composites under different modes. Compos Sci Technol 126:94–105
42.
Zurück zum Zitat Cepeda-Jiménez CM, Lutfullin RY, Ruano OA (2013) Effect of processing temperature on the texture and shear mechanical properties of diffusion bonded Ti–6Al–4V multilayer laminates. Metall Mater Trans A 44:4743–4753 Cepeda-Jiménez CM, Lutfullin RY, Ruano OA (2013) Effect of processing temperature on the texture and shear mechanical properties of diffusion bonded Ti–6Al–4V multilayer laminates. Metall Mater Trans A 44:4743–4753
43.
Zurück zum Zitat Liu BX, Wang S, Ma JL, Yin FX, Feng JH, Chen CX (2018) Microstructure and mechanical properties of hot-rolled stainless steel clad plates by heat treatment. Mater Chem Phys 216:460–467 Liu BX, Wang S, Ma JL, Yin FX, Feng JH, Chen CX (2018) Microstructure and mechanical properties of hot-rolled stainless steel clad plates by heat treatment. Mater Chem Phys 216:460–467
44.
Zurück zum Zitat Jing Y, Qin Y, Zang XM, Shang QY, Song H (2014) A novel reduction-bonding process to fabricate stainless steel clad plate. J Alloy Compd 617:688–698 Jing Y, Qin Y, Zang XM, Shang QY, Song H (2014) A novel reduction-bonding process to fabricate stainless steel clad plate. J Alloy Compd 617:688–698
45.
Zurück zum Zitat Jing Y, Qin Y, Zang XM, Li YH (2014) The bonding properties and interfacial morphologies of clad plate prepared by multiple passes hot rolling in a protective atmosphere. J Mater Process Technol 214:1686–1695 Jing Y, Qin Y, Zang XM, Li YH (2014) The bonding properties and interfacial morphologies of clad plate prepared by multiple passes hot rolling in a protective atmosphere. J Mater Process Technol 214:1686–1695
46.
Zurück zum Zitat Madaah-Hosseini HR, Kokabi AH (2002) Cold roll bonding of 5754-aluminum strips. Mater Sci Eng, A 335:186–190 Madaah-Hosseini HR, Kokabi AH (2002) Cold roll bonding of 5754-aluminum strips. Mater Sci Eng, A 335:186–190
47.
Zurück zum Zitat Li L, Zhang XJ, Zhu ZC, Liu HY (2014) Investigation on bonding of stainless steel clad plate by vacuum hot rolling. J Mater Metall 13:46–50 (in Chinese) Li L, Zhang XJ, Zhu ZC, Liu HY (2014) Investigation on bonding of stainless steel clad plate by vacuum hot rolling. J Mater Metall 13:46–50 (in Chinese)
48.
Zurück zum Zitat Mehr VY, Toroghinejad MR, Rezaeian A (2014) The effects of oxide film and annealing treatment on the bond strength of Al–Cu strips in cold roll bonding process. Mater Des 53:174–181 Mehr VY, Toroghinejad MR, Rezaeian A (2014) The effects of oxide film and annealing treatment on the bond strength of Al–Cu strips in cold roll bonding process. Mater Des 53:174–181
49.
Zurück zum Zitat Zhang XJ, Li L, Liu HY, Yin FX (2013) Application of insert layer in manufacturing clad metal plates. Steel Roll 30:45–49 (in Chinese) Zhang XJ, Li L, Liu HY, Yin FX (2013) Application of insert layer in manufacturing clad metal plates. Steel Roll 30:45–49 (in Chinese)
50.
Zurück zum Zitat Jamaati R, Toroghinejad MR (2011) The role of surface preparation parameters on cold roll bonding of aluminum strips. J Mater Eng Perform 20:192–197 Jamaati R, Toroghinejad MR (2011) The role of surface preparation parameters on cold roll bonding of aluminum strips. J Mater Eng Perform 20:192–197
51.
Zurück zum Zitat Wu HY, Lee S, Wang JY (1998) Solid-state bonding of iron-based alloys, steel–brass, and aluminum alloys. J Mater Process Technol 75:173–179 Wu HY, Lee S, Wang JY (1998) Solid-state bonding of iron-based alloys, steel–brass, and aluminum alloys. J Mater Process Technol 75:173–179
52.
Zurück zum Zitat Jamaati R, Toroghinejad MR (2011) Cold roll bonding bond strengths: review. Mater Sci Technol 27:1101–1108 Jamaati R, Toroghinejad MR (2011) Cold roll bonding bond strengths: review. Mater Sci Technol 27:1101–1108
53.
Zurück zum Zitat Wu ZJ, Peng WF, Shu XD (2017) Influence of rolling temperature on interface properties of the cross wedge rolling of 42CrMo/Q235 laminated shaft. Int J Adv Manuf Technol 91:517–526 Wu ZJ, Peng WF, Shu XD (2017) Influence of rolling temperature on interface properties of the cross wedge rolling of 42CrMo/Q235 laminated shaft. Int J Adv Manuf Technol 91:517–526
54.
Zurück zum Zitat Li L, Zhang XJ, Liu HY, Yin FX (2013) Formation mechanism of oxide inclusion on the interface of hot-rolled stainless steel clad plates. J Iron Steel Res 25:43–47 (in Chinese) Li L, Zhang XJ, Liu HY, Yin FX (2013) Formation mechanism of oxide inclusion on the interface of hot-rolled stainless steel clad plates. J Iron Steel Res 25:43–47 (in Chinese)
55.
Zurück zum Zitat Masahiro N, Ikuro H, Shinji K (2006) Effects of surface oxides on the phospatability of the high strength cold rolled steel. Tetsu Hagane 92:378–384 (in Japanese) Masahiro N, Ikuro H, Shinji K (2006) Effects of surface oxides on the phospatability of the high strength cold rolled steel. Tetsu Hagane 92:378–384 (in Japanese)
56.
Zurück zum Zitat Wang GL (2013) Research on interface inclusions’ evolution mechanism and process control of vacuum hot roll-cladding. Doctor thesis of Northeastern University, 1–162. (in Chinese) Wang GL (2013) Research on interface inclusions’ evolution mechanism and process control of vacuum hot roll-cladding. Doctor thesis of Northeastern University, 1–162. (in Chinese)
57.
Zurück zum Zitat Liu BX, Wang S, Chen CX, Fang W, Yin FX (2019) Interface characteristics and fracture behavior of hot rolled stainless steel clad plates with different vacuum degrees. Appl Surf Sci 463:121–131 Liu BX, Wang S, Chen CX, Fang W, Yin FX (2019) Interface characteristics and fracture behavior of hot rolled stainless steel clad plates with different vacuum degrees. Appl Surf Sci 463:121–131
58.
Zurück zum Zitat Qin Q, Wu ZH, Zang Y, Guan B, Zhang FX (2016) Warping deformation of 316l/Q345r stainless composite plate after removal strake. World J Eng 13:206–209 Qin Q, Wu ZH, Zang Y, Guan B, Zhang FX (2016) Warping deformation of 316l/Q345r stainless composite plate after removal strake. World J Eng 13:206–209
59.
Zurück zum Zitat Qin Q, Zhang DT, Zang Y, Guan B (2015) A simulation study on the multi-pass rolling bond of 316L/Q345R stainless clad plate. Adv Mech Eng 7:1–13 Qin Q, Zhang DT, Zang Y, Guan B (2015) A simulation study on the multi-pass rolling bond of 316L/Q345R stainless clad plate. Adv Mech Eng 7:1–13
60.
Zurück zum Zitat Tong JG, Chen R, Bao WP, Yan K, Ren XP (2009) Composite rolling of three-layer iron-based metals of 25CrMoA steel/micro-alloyed steel/A235 steel. J Univ Sci Technol Beijing 31:186–192 (in Chinese) Tong JG, Chen R, Bao WP, Yan K, Ren XP (2009) Composite rolling of three-layer iron-based metals of 25CrMoA steel/micro-alloyed steel/A235 steel. J Univ Sci Technol Beijing 31:186–192 (in Chinese)
61.
Zurück zum Zitat Jin JB (2013) Research of cladding rate and shear strength for hot rolled stainless steel clad plate. Wide Heavy Plate 19:12–15 (in Chinese) Jin JB (2013) Research of cladding rate and shear strength for hot rolled stainless steel clad plate. Wide Heavy Plate 19:12–15 (in Chinese)
62.
Zurück zum Zitat Kolarik L, Janovec J, Kolarikova M, Nachtnebl P (2015) Influence of diffusion welding time on homogenous steel joints. Proc Eng 100:1678–1685 Kolarik L, Janovec J, Kolarikova M, Nachtnebl P (2015) Influence of diffusion welding time on homogenous steel joints. Proc Eng 100:1678–1685
63.
Zurück zum Zitat He JY, Ma Y, Yan DS, Jiao SH, Yuan FP, Wu XL (2018) Improving ductility by increasing fraction of interfacial zone in low C steel/304SS laminates. Mater Sci Eng, A 726:288–297 He JY, Ma Y, Yan DS, Jiao SH, Yuan FP, Wu XL (2018) Improving ductility by increasing fraction of interfacial zone in low C steel/304SS laminates. Mater Sci Eng, A 726:288–297
64.
Zurück zum Zitat Zhang LJ, He Y, Liu HY, Zhang XJ, Liu BL (2016) Effect of induction heating on carbon steel layer in stainless steel clad plates. CFHI Technol 171:52–56 (in Chinese) Zhang LJ, He Y, Liu HY, Zhang XJ, Liu BL (2016) Effect of induction heating on carbon steel layer in stainless steel clad plates. CFHI Technol 171:52–56 (in Chinese)
65.
Zurück zum Zitat Li L, Zhu ZC, Zhang XJ, Liu HY (2015) Experimental study on hot rolled stainless steel clad plate produced by TMCP. J Mater Eng 43:62–67 (in Chinese) Li L, Zhu ZC, Zhang XJ, Liu HY (2015) Experimental study on hot rolled stainless steel clad plate produced by TMCP. J Mater Eng 43:62–67 (in Chinese)
66.
Zurück zum Zitat Motarjemi AK, Kocak M, Ventzke V (2002) Mechanical and fracture characterization of a bi-material steel plate. Int J Press Vessel Pip 79:181–191 Motarjemi AK, Kocak M, Ventzke V (2002) Mechanical and fracture characterization of a bi-material steel plate. Int J Press Vessel Pip 79:181–191
67.
Zurück zum Zitat Hedayati O, Korei N, Adeli M, Etminanbakhsh M (2017) Microstructural evolution and interfacial diffusion during heat treatment of hastelloy/stainless steel bimetals. J Alloy Compd 712:172–178 Hedayati O, Korei N, Adeli M, Etminanbakhsh M (2017) Microstructural evolution and interfacial diffusion during heat treatment of hastelloy/stainless steel bimetals. J Alloy Compd 712:172–178
68.
Zurück zum Zitat Rajeev R, Samajdar I, Raman R, Harendranath CS, Kale GB (2001) Origin of hard and soft zone formation during cladding of austenitic/duplex stainless steel on plain carbon steel. Mater Sci Technol 17:1005–1010 Rajeev R, Samajdar I, Raman R, Harendranath CS, Kale GB (2001) Origin of hard and soft zone formation during cladding of austenitic/duplex stainless steel on plain carbon steel. Mater Sci Technol 17:1005–1010
69.
Zurück zum Zitat Ayer R, Mueller RR, Leta DP, Sisak WJ (1989) Phase transformations at steel/in625 clad interfaces. Metall Trans A 20:665–681 Ayer R, Mueller RR, Leta DP, Sisak WJ (1989) Phase transformations at steel/in625 clad interfaces. Metall Trans A 20:665–681
70.
Zurück zum Zitat Pavlovsky J, Million B, Ciha K, Stransky K (1991) Carbon redistribution between an austenitic cladding and a ferritic steel for pressure vessels of nuclear reactor. Mater Sci Eng, A 149:105–110 Pavlovsky J, Million B, Ciha K, Stransky K (1991) Carbon redistribution between an austenitic cladding and a ferritic steel for pressure vessels of nuclear reactor. Mater Sci Eng, A 149:105–110
71.
72.
Zurück zum Zitat Li L, Zhang XJ, Liu G, Fu HY, Li MN (2015) Effect of Ni layer thickness on bonding strength of hot rolled clad steel plate. Trans Mater Heat Treat 36:80–85 Li L, Zhang XJ, Liu G, Fu HY, Li MN (2015) Effect of Ni layer thickness on bonding strength of hot rolled clad steel plate. Trans Mater Heat Treat 36:80–85
73.
Zurück zum Zitat Luo ZA, Wang GL, Xie GM (2013) Interfacial microstructure and properties of a vacuum hot roll bonded titanium stainless steel clad plate with a niobium interlayer. Acta Metall Sin 26:754–760 Luo ZA, Wang GL, Xie GM (2013) Interfacial microstructure and properties of a vacuum hot roll bonded titanium stainless steel clad plate with a niobium interlayer. Acta Metall Sin 26:754–760
74.
Zurück zum Zitat Pozuelo M, Carreno F, Carsi M, Ruano OA (2007) Influence of interfaces on the mechanical properties of ultrahigh carbon steel multilayer laminates. Int J Mat Res 98:47–52 Pozuelo M, Carreno F, Carsi M, Ruano OA (2007) Influence of interfaces on the mechanical properties of ultrahigh carbon steel multilayer laminates. Int J Mat Res 98:47–52
75.
Zurück zum Zitat Syn CK, Lesuer DR, Wolfenstine J, Sherby OD (1993) Layer thickness effect on ductile tensile fracture of ultrahigh carbon steel–brass laminates. Metall Trans A 24:1647–1653 Syn CK, Lesuer DR, Wolfenstine J, Sherby OD (1993) Layer thickness effect on ductile tensile fracture of ultrahigh carbon steel–brass laminates. Metall Trans A 24:1647–1653
76.
Zurück zum Zitat Liang F, Tan HF, Zhang B, Zhang GP (2017) Maximizing necking-delayed fracture of sandwich-structured Ni/Cu/Ni composites. Scr Mater 134:28–32 Liang F, Tan HF, Zhang B, Zhang GP (2017) Maximizing necking-delayed fracture of sandwich-structured Ni/Cu/Ni composites. Scr Mater 134:28–32
77.
Zurück zum Zitat Liu HS, Zhang B, Zhang GP (2011) Delaying premature local necking of high strength Cu: a potential way to enhance plasticity. Scr Mater 64:13–16 Liu HS, Zhang B, Zhang GP (2011) Delaying premature local necking of high strength Cu: a potential way to enhance plasticity. Scr Mater 64:13–16
78.
Zurück zum Zitat Tan HF, Zhang B, Kang YK, Zhu XF, Zhang GP (2016) Fracture behavior of sandwich-structured metal/amorphous alloy/metal composites. Mater Des 90:60–65 Tan HF, Zhang B, Kang YK, Zhu XF, Zhang GP (2016) Fracture behavior of sandwich-structured metal/amorphous alloy/metal composites. Mater Des 90:60–65
79.
Zurück zum Zitat Park J, Kim JS, Kang MJ, Sohn SS, Cho WT, Kim HS, Lee S (2017) Tensile property improvement of TWIP-cored three layer steel sheets fabricated by hot roll bonding with low carbon steel or interstitial free steel. Sci Rep 7:40231 Park J, Kim JS, Kang MJ, Sohn SS, Cho WT, Kim HS, Lee S (2017) Tensile property improvement of TWIP-cored three layer steel sheets fabricated by hot roll bonding with low carbon steel or interstitial free steel. Sci Rep 7:40231
80.
Zurück zum Zitat Serror MH (2013) Analytical study for deformability of laminated sheet metal. J Adv Res 4:83–92 Serror MH (2013) Analytical study for deformability of laminated sheet metal. J Adv Res 4:83–92
81.
Zurück zum Zitat Guo X, Weng GJ, Soh AK (2012) Ductility enhancement of layered stainless steel with nanograined interface layers. Comput Mater Sci 55:350–355 Guo X, Weng GJ, Soh AK (2012) Ductility enhancement of layered stainless steel with nanograined interface layers. Comput Mater Sci 55:350–355
82.
Zurück zum Zitat Pommier H, Busso EP, Morgeneyer TF, Pineau A (2016) Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels: effect of carbon, nitrogen and phosphorus. Acta Mater 103:893–908 Pommier H, Busso EP, Morgeneyer TF, Pineau A (2016) Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels: effect of carbon, nitrogen and phosphorus. Acta Mater 103:893–908
83.
Zurück zum Zitat Jones R, Randle V, Owen G (2008) Carbide precipitation and grain boundary plane selection in overaged type 316 austenitic stainless steel. Mater Sci Eng, A 496:256–261 Jones R, Randle V, Owen G (2008) Carbide precipitation and grain boundary plane selection in overaged type 316 austenitic stainless steel. Mater Sci Eng, A 496:256–261
84.
Zurück zum Zitat Sun GS, Du LX, Hu J, Xie H, Wu HY, Misra RDK (2015) Ultrahigh strength nano/ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment. Mater Charact 110:228–235 Sun GS, Du LX, Hu J, Xie H, Wu HY, Misra RDK (2015) Ultrahigh strength nano/ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment. Mater Charact 110:228–235
85.
Zurück zum Zitat Avramovic-Cingara G, Ososkov Y, Jain MK, Wilkinson DS (2009) Effect of martensite distribution on damage behavior in DP600 dual phase steels. Mater Sci Eng, A 516:7–16 Avramovic-Cingara G, Ososkov Y, Jain MK, Wilkinson DS (2009) Effect of martensite distribution on damage behavior in DP600 dual phase steels. Mater Sci Eng, A 516:7–16
86.
Zurück zum Zitat Eskandari M, Kermanpur A, Najafizadeh A (2009) Formation of nanocrystalline structure in 301 stainless steel produced by martensite treatment. Metall Mater Trans A 40:2241–2249 Eskandari M, Kermanpur A, Najafizadeh A (2009) Formation of nanocrystalline structure in 301 stainless steel produced by martensite treatment. Metall Mater Trans A 40:2241–2249
87.
Zurück zum Zitat Eskandari M, Kermanpur A, Najafizadeh A (2009) Formation of nano-grained structure in a 301 stainless steel using a repetitive thermo-mechanical treatment. Mater Lett 63:1442–1444 Eskandari M, Kermanpur A, Najafizadeh A (2009) Formation of nano-grained structure in a 301 stainless steel using a repetitive thermo-mechanical treatment. Mater Lett 63:1442–1444
88.
Zurück zum Zitat Bowden EP, Tabor D (1939) The area of contact between stationary and between moving surfaces. Proc R Soc Lond A 169:391–413 Bowden EP, Tabor D (1939) The area of contact between stationary and between moving surfaces. Proc R Soc Lond A 169:391–413
89.
Zurück zum Zitat Burton MS (1954) Metallurgical principles of metal bonding. Weld J 33:1051–1057 Burton MS (1954) Metallurgical principles of metal bonding. Weld J 33:1051–1057
90.
Zurück zum Zitat Cave JA, Williams JD (1973) The mechanism of cold pressure welding by rolling. J Inst Met 101:203–207 Cave JA, Williams JD (1973) The mechanism of cold pressure welding by rolling. J Inst Met 101:203–207
91.
Zurück zum Zitat Derby B, Wallach ER (1984) Diffusion bonding: development of theoretical model. Mater Sci 18:427–431 Derby B, Wallach ER (1984) Diffusion bonding: development of theoretical model. Mater Sci 18:427–431
92.
Zurück zum Zitat Mitani Y, Vargas R, Zavala M (1984) Deformation and diffusion bonding of aluminide-coated steels. Thin Solid Films 111:37–42 Mitani Y, Vargas R, Zavala M (1984) Deformation and diffusion bonding of aluminide-coated steels. Thin Solid Films 111:37–42
93.
Zurück zum Zitat Brown DW, Okuniewski MA, Sisneros TA, Clausen B, Moore GA, Balogh L (2016) Neutron diffraction measurement of residual stresses, dislocation density and texture in Zr-bonded U-10Mo “mini” fuel foils and plates. J Nucl Mater 482:63–74 Brown DW, Okuniewski MA, Sisneros TA, Clausen B, Moore GA, Balogh L (2016) Neutron diffraction measurement of residual stresses, dislocation density and texture in Zr-bonded U-10Mo “mini” fuel foils and plates. J Nucl Mater 482:63–74
94.
Zurück zum Zitat Pan D, Gao K, Yu J (1989) Cold roll bonding of bimetallic sheets and strips. Mater Sci Technol 5:934–939 Pan D, Gao K, Yu J (1989) Cold roll bonding of bimetallic sheets and strips. Mater Sci Technol 5:934–939
95.
Zurück zum Zitat Shirzadi AA, Assadi H, Wallach ER (2001) Interface evolution and bond strength when diffusion bonding materials with stable oxide films. Surf Interface Anal 31:609–618 Shirzadi AA, Assadi H, Wallach ER (2001) Interface evolution and bond strength when diffusion bonding materials with stable oxide films. Surf Interface Anal 31:609–618
96.
Zurück zum Zitat Parks JM (1953) Recrystallization in welding. Weld J Suppl 32:209–222 Parks JM (1953) Recrystallization in welding. Weld J Suppl 32:209–222
97.
Zurück zum Zitat Barabash RI, Barabash OM, Ojima M, Yu ZZ, Inoue J, Nambu S, Koseki T, Xu RQ, Feng ZL (2014) Interphase strain gradients in multilayered steel composite from microdiffraction. Metall Mater Trans A 45:98–108 Barabash RI, Barabash OM, Ojima M, Yu ZZ, Inoue J, Nambu S, Koseki T, Xu RQ, Feng ZL (2014) Interphase strain gradients in multilayered steel composite from microdiffraction. Metall Mater Trans A 45:98–108
98.
Zurück zum Zitat Min XH, Emura S, Meng FQ, Mi GB, Tsuchiya K (2015) Mechanical twinning and dislocation slip multilayered deformation microstructures in β-type Ti–Mo base alloy. Scr Mater 102:79–82 Min XH, Emura S, Meng FQ, Mi GB, Tsuchiya K (2015) Mechanical twinning and dislocation slip multilayered deformation microstructures in β-type Ti–Mo base alloy. Scr Mater 102:79–82
99.
Zurück zum Zitat Bay N (1979) Cold pressure welding-the mechanisms governing bonding. J Eng Ind 101:122–127 Bay N (1979) Cold pressure welding-the mechanisms governing bonding. J Eng Ind 101:122–127
100.
Zurück zum Zitat Bay N (1983) Mechanisms producing metallic bonds in cold welding. Weld Res Suppl 5:137–142 Bay N (1983) Mechanisms producing metallic bonds in cold welding. Weld Res Suppl 5:137–142
101.
Zurück zum Zitat Zhang W, Bay N (1997) Cold welding-theoretical modeling of the weld formation. Weld Res Suppl 10:417–430 Zhang W, Bay N (1997) Cold welding-theoretical modeling of the weld formation. Weld Res Suppl 10:417–430
102.
Zurück zum Zitat Bay N, Bjerregaard H, Petersen SB (1994) Cross shear roll bonding. J Mater Process Technol 45:1–6 Bay N, Bjerregaard H, Petersen SB (1994) Cross shear roll bonding. J Mater Process Technol 45:1–6
103.
Zurück zum Zitat Tylecote RF, Howd D, Furmidage JR (1958) The influence of surface films on the pressure welding of metals. Br Weld J 5:21–38 Tylecote RF, Howd D, Furmidage JR (1958) The influence of surface films on the pressure welding of metals. Br Weld J 5:21–38
104.
Zurück zum Zitat Milner DR, Rowe GW (1962) Fundamentals of solid-phase welding. Metall Rev 7:433–480 Milner DR, Rowe GW (1962) Fundamentals of solid-phase welding. Metall Rev 7:433–480
105.
Zurück zum Zitat Zhang W, Bay N (1997) A numerical model for cold welding of metals. CIRP Ann 46:195–200 Zhang W, Bay N (1997) A numerical model for cold welding of metals. CIRP Ann 46:195–200
106.
Zurück zum Zitat Wang GL, Zuo ZA, Xie GM (2011) Experiment research on impact of total rolling reduction ratio on the properties of vacuum rolling bonding ultra-thick steel plate. Adv Mater Res 299–300:962–965 Wang GL, Zuo ZA, Xie GM (2011) Experiment research on impact of total rolling reduction ratio on the properties of vacuum rolling bonding ultra-thick steel plate. Adv Mater Res 299–300:962–965
107.
Zurück zum Zitat Suehiro M, Hashimoto Y (1989) Carbon distribution near interface between base and cladding steels in austenite stainless clad steel sheet. Tetsu Hagane 75:1501–1507 Suehiro M, Hashimoto Y (1989) Carbon distribution near interface between base and cladding steels in austenite stainless clad steel sheet. Tetsu Hagane 75:1501–1507
108.
Zurück zum Zitat Kurt B, Calik A (2009) Interface structure of diffusion bonded duplex stainless steel and medium carbon steel couple. Mater Charact 60:1035–1040 Kurt B, Calik A (2009) Interface structure of diffusion bonded duplex stainless steel and medium carbon steel couple. Mater Charact 60:1035–1040
109.
Zurück zum Zitat Huang ML, Wang L (1998) Carbon migration in 5Cr–0.5Mo/21Cr–12Ni dissimilar metal clad. Metall Mater Trans A 29:3037–3046 Huang ML, Wang L (1998) Carbon migration in 5Cr–0.5Mo/21Cr–12Ni dissimilar metal clad. Metall Mater Trans A 29:3037–3046
110.
Zurück zum Zitat Sawanishi C, Ogura T, Sumi H, Oi K, Yasuda K, Hirose A (2012) Interfacial microstructure observation and nanoindentation measurements in mild steel/HT780 clad plate. Mater Sci Technol 28:1459–1464 Sawanishi C, Ogura T, Sumi H, Oi K, Yasuda K, Hirose A (2012) Interfacial microstructure observation and nanoindentation measurements in mild steel/HT780 clad plate. Mater Sci Technol 28:1459–1464
111.
Zurück zum Zitat Gomez X, Echeberria J (2000) Microstructure and mechanical properties of low alloy steel T11-austenitic steel 347H bimetallic tubes. Mater Sci Technol 16:187–193 Gomez X, Echeberria J (2000) Microstructure and mechanical properties of low alloy steel T11-austenitic steel 347H bimetallic tubes. Mater Sci Technol 16:187–193
112.
Zurück zum Zitat Liu BX, Wang S, Fang W, Yin FX, Chen CX (2019) Meso and microscale clad interface characteristics of hot-rolled stainless steel clad plate. Mater Charact 148:17–25 Liu BX, Wang S, Fang W, Yin FX, Chen CX (2019) Meso and microscale clad interface characteristics of hot-rolled stainless steel clad plate. Mater Charact 148:17–25
113.
Zurück zum Zitat Qin YF, He JN, Yin FX, Liu BX, Zhang FY (2017) Effect of Ti particle size on mechanical and tribological properties of TiCN coatings prepared by reactive plasma spraying. Ceram Int 43:16548–16554 Qin YF, He JN, Yin FX, Liu BX, Zhang FY (2017) Effect of Ti particle size on mechanical and tribological properties of TiCN coatings prepared by reactive plasma spraying. Ceram Int 43:16548–16554
114.
Zurück zum Zitat Qin YF, He JN, Yin FX, Zhang FY, Liu BX (2017) Influence of initial Ti particle size on microstructure and fracture toughness of reactive plasma sprayed TiCN coatings. Surf Coat Technol 325:482–489 Qin YF, He JN, Yin FX, Zhang FY, Liu BX (2017) Influence of initial Ti particle size on microstructure and fracture toughness of reactive plasma sprayed TiCN coatings. Surf Coat Technol 325:482–489
115.
Zurück zum Zitat Zhang FY, Li C, Yan MF, He JN, Yang YG, Yin FX (2017) Microstructure and nanomechanical properties of co-deposited Ti–Cr films prepared by magnetron sputtering. Surf Coat Technol 325:636–642 Zhang FY, Li C, Yan MF, He JN, Yang YG, Yin FX (2017) Microstructure and nanomechanical properties of co-deposited Ti–Cr films prepared by magnetron sputtering. Surf Coat Technol 325:636–642
116.
Zurück zum Zitat Jamaati R, Toroghinejad MR, Amirkhanlou S, Edris H (2015) Strengthening mechanisms in nanostructured interstitial free steel deformed to high strain. Mater Sci Eng, A 639:656–662 Jamaati R, Toroghinejad MR, Amirkhanlou S, Edris H (2015) Strengthening mechanisms in nanostructured interstitial free steel deformed to high strain. Mater Sci Eng, A 639:656–662
117.
Zurück zum Zitat Jamaati R, Toroghinejad MR, Amirkhanlou S, Edris H (2015) Microstructural evolution of nanostructured steel-based composite fabricated by accumulative roll bonding. Mater Sci Eng, A 639:298–306 Jamaati R, Toroghinejad MR, Amirkhanlou S, Edris H (2015) Microstructural evolution of nanostructured steel-based composite fabricated by accumulative roll bonding. Mater Sci Eng, A 639:298–306
118.
Zurück zum Zitat Jamaati R, Toroghinejad MR, Edris H, Salmani MR (2014) Fracture of steel nanocomposite made using accumulative roll bonding. Mater Sci Technol 30:1973–1982 Jamaati R, Toroghinejad MR, Edris H, Salmani MR (2014) Fracture of steel nanocomposite made using accumulative roll bonding. Mater Sci Technol 30:1973–1982
119.
Zurück zum Zitat Moradgholi J, Monshi A, Farmanesh K, Toroghinejad MR, Loghman-Estarki MR (2017) Comparison of microstructure, toughness, mechanical properties and work hardening of titanium/TiO2 and titanium/SiC composites manufactured by accumulative roll bonding (ARB) process. Ceram Int 43:7701–7709 Moradgholi J, Monshi A, Farmanesh K, Toroghinejad MR, Loghman-Estarki MR (2017) Comparison of microstructure, toughness, mechanical properties and work hardening of titanium/TiO2 and titanium/SiC composites manufactured by accumulative roll bonding (ARB) process. Ceram Int 43:7701–7709
120.
Zurück zum Zitat Takeuchi T, Kakubo Y, Matsukawa Y, Nozawa Y, Toyama T, Nagai Y, Nishiyama Y, Katsuyama J, Yamaguchi Y, Onizawa K, Suzuki M (2014) Effect of thermal aging on microstructure and hardness of stainless steel weld-overlay claddings of nuclear reactor pressure vessels. J Nucl Mater 452:235–240 Takeuchi T, Kakubo Y, Matsukawa Y, Nozawa Y, Toyama T, Nagai Y, Nishiyama Y, Katsuyama J, Yamaguchi Y, Onizawa K, Suzuki M (2014) Effect of thermal aging on microstructure and hardness of stainless steel weld-overlay claddings of nuclear reactor pressure vessels. J Nucl Mater 452:235–240
121.
Zurück zum Zitat Rashid RA, Abaspour S, Palanisamy S, Matthews N, Dargusch MS (2017) Metallurgical and geometrical characterization of the 316L stainless steel clad deposited on a mild steel substrate. Surf Coat Technol 327:174–184 Rashid RA, Abaspour S, Palanisamy S, Matthews N, Dargusch MS (2017) Metallurgical and geometrical characterization of the 316L stainless steel clad deposited on a mild steel substrate. Surf Coat Technol 327:174–184
122.
Zurück zum Zitat Rao NV, Sarma DS, Nagarjuna S, Reddy GM (2009) Influence of hot rolling and heat treatment on structure and properties of HSLA steel explosively clad with austenitic steel. Mater Sci Technol 25:1387–1396 Rao NV, Sarma DS, Nagarjuna S, Reddy GM (2009) Influence of hot rolling and heat treatment on structure and properties of HSLA steel explosively clad with austenitic steel. Mater Sci Technol 25:1387–1396
123.
Zurück zum Zitat Liu BX, Huang LJ, Geng L, Wang B, Cui XP (2014) Fracture behaviors and microstructural failure mechanisms of laminated Ti–TiBw/Ti composites. Mater Sci Eng, A 611:290–297 Liu BX, Huang LJ, Geng L, Wang B, Cui XP (2014) Fracture behaviors and microstructural failure mechanisms of laminated Ti–TiBw/Ti composites. Mater Sci Eng, A 611:290–297
124.
Zurück zum Zitat Guo YJ, Qiao GJ, Jian WZ, Zhi XH (2010) Microstructure and tensile behavior of Cu–Al multilayered composites prepared by plasma activated sintering. Mater Sci Eng, A 527:5234–5240 Guo YJ, Qiao GJ, Jian WZ, Zhi XH (2010) Microstructure and tensile behavior of Cu–Al multilayered composites prepared by plasma activated sintering. Mater Sci Eng, A 527:5234–5240
125.
Zurück zum Zitat Li T, Suo Z (2006) Deformability of thin metal films on elastomer substrates. Int J Solids Struct 43:2351–2363 Li T, Suo Z (2006) Deformability of thin metal films on elastomer substrates. Int J Solids Struct 43:2351–2363
126.
Zurück zum Zitat Li T, Suo Z (2007) Ductility of thin metal films on polymer substrates modulated by interfacial adhesion. Int J Solids Struct 44:1696–1705 Li T, Suo Z (2007) Ductility of thin metal films on polymer substrates modulated by interfacial adhesion. Int J Solids Struct 44:1696–1705
127.
Zurück zum Zitat Hsia KJ, Suo Z, Yang W (1994) Cleavage due to dislocation confinement in layered materials. J Mech Phys Solids 42:877–896 Hsia KJ, Suo Z, Yang W (1994) Cleavage due to dislocation confinement in layered materials. J Mech Phys Solids 42:877–896
128.
Zurück zum Zitat Koseki T, Inoue J, Nambu S (2014) Development of multilayer steels for improved combinations of high strength and high ductility. Mater Trans 55:227–237 Koseki T, Inoue J, Nambu S (2014) Development of multilayer steels for improved combinations of high strength and high ductility. Mater Trans 55:227–237
129.
Zurück zum Zitat Inoue J, Nambu S, Ishimoto Y, Koseki T (2008) Fracture elongation of brittle/ductile multilayered steel composites with a strong interface. Scr Mater 59:1055–1058 Inoue J, Nambu S, Ishimoto Y, Koseki T (2008) Fracture elongation of brittle/ductile multilayered steel composites with a strong interface. Scr Mater 59:1055–1058
130.
Zurück zum Zitat Hwu KL, Derby B (1999) Fracture of metal/ceramic laminates-I. transition from single to multiple cracking. Acta Mater 47:529–543 Hwu KL, Derby B (1999) Fracture of metal/ceramic laminates-I. transition from single to multiple cracking. Acta Mater 47:529–543
131.
Zurück zum Zitat Seok MY, Lee JA, Lee DH, Ramamurty U, Nambu S, Koseki T, Jang J (2016) Decoupling the contributions of constituent layers to the strength and ductility of a multilayered steel. Acta Mater 121:164–172 Seok MY, Lee JA, Lee DH, Ramamurty U, Nambu S, Koseki T, Jang J (2016) Decoupling the contributions of constituent layers to the strength and ductility of a multilayered steel. Acta Mater 121:164–172
132.
Zurück zum Zitat Lesuer DR, Syn CK, Sherby OD, Wadsworth J, Lewandowski JJ, Hunt WH (1996) Mechanical behavior of laminated metal composites. Int Mater Rev 41:169–197 Lesuer DR, Syn CK, Sherby OD, Wadsworth J, Lewandowski JJ, Hunt WH (1996) Mechanical behavior of laminated metal composites. Int Mater Rev 41:169–197
133.
Zurück zum Zitat Snyder BC, Wadsworth J, Sherby OD (1984) Superplastic behavior in ferrous laminated composites. Acta Mater 32:919–932 Snyder BC, Wadsworth J, Sherby OD (1984) Superplastic behavior in ferrous laminated composites. Acta Mater 32:919–932
134.
Zurück zum Zitat Cohades A, Mortensen A (2014) Tensile elongation of unidirectional or laminated composites combining a brittle reinforcement with a ductile strain and strain-rate hardening matrix. Acta Mater 71:31–43 Cohades A, Mortensen A (2014) Tensile elongation of unidirectional or laminated composites combining a brittle reinforcement with a ductile strain and strain-rate hardening matrix. Acta Mater 71:31–43
135.
Zurück zum Zitat Cao WQ, Zhang MD, Huang CX, Xiao SY, Dong H, Weng YQ (2016) Ultrahigh charpy impact toughness (~ 450 J) achieved in high strength ferrite/martensite laminated steels. Sci Rep 7:41459 Cao WQ, Zhang MD, Huang CX, Xiao SY, Dong H, Weng YQ (2016) Ultrahigh charpy impact toughness (~ 450 J) achieved in high strength ferrite/martensite laminated steels. Sci Rep 7:41459
136.
Zurück zum Zitat Pozuelo M, Carreno F, Ruano OA (2006) Delamination effect on the impact toughness of an ultrahigh carbon-mild steel laminate composite. Compos Sci Technol 66:2671–2676 Pozuelo M, Carreno F, Ruano OA (2006) Delamination effect on the impact toughness of an ultrahigh carbon-mild steel laminate composite. Compos Sci Technol 66:2671–2676
137.
Zurück zum Zitat Kimura Y, Inoue T, Yin FX, Tsuzaki K (2008) Inverse temperature dependence of toughness in an ultrafine grain-structure steel. Science 320:1057–1060 Kimura Y, Inoue T, Yin FX, Tsuzaki K (2008) Inverse temperature dependence of toughness in an ultrafine grain-structure steel. Science 320:1057–1060
138.
Zurück zum Zitat Huang LJ, Geng L, Peng HX (2015) Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal? Prog Mater Sci 71:93–168 Huang LJ, Geng L, Peng HX (2015) Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal? Prog Mater Sci 71:93–168
139.
Zurück zum Zitat Song F, Bai YL (2003) Effects of nanostructures on the fracture strength of the interfaces in nacre. J Mater Res 18:1741–1744 Song F, Bai YL (2003) Effects of nanostructures on the fracture strength of the interfaces in nacre. J Mater Res 18:1741–1744
140.
Zurück zum Zitat Price RD, Jiang FC, Kulin RM, Vecchio KS (2011) Effects of ductile phase volume fraction on the mechanical properties of Ti–TiAl3 metal-intermetallic laminate (MIL) composites. Mater Sci Eng, A 528:3134–3146 Price RD, Jiang FC, Kulin RM, Vecchio KS (2011) Effects of ductile phase volume fraction on the mechanical properties of Ti–TiAl3 metal-intermetallic laminate (MIL) composites. Mater Sci Eng, A 528:3134–3146
141.
Zurück zum Zitat Jackson AP, Vincent JF (1989) A physical model of nacre. Compos Sci Technol 36:255–266 Jackson AP, Vincent JF (1989) A physical model of nacre. Compos Sci Technol 36:255–266
142.
Zurück zum Zitat Koyama M, Zhang Z, Wang MM, Ponge D, Raabe D, Tsuzaki K, Noguchi H, Tasan CC (2017) Bone-like crack resistance in hierarchical metastable nanolaminate steel. Science 355:1055–1057 Koyama M, Zhang Z, Wang MM, Ponge D, Raabe D, Tsuzaki K, Noguchi H, Tasan CC (2017) Bone-like crack resistance in hierarchical metastable nanolaminate steel. Science 355:1055–1057
Metadaten
Titel
Interface formation and bonding mechanisms of hot-rolled stainless steel clad plate
verfasst von
B. X. Liu
Q. An
F. X. Yin
S. Wang
C. X. Chen
Publikationsdatum
05.04.2019
Verlag
Springer US
Erschienen in
Journal of Materials Science / Ausgabe 17/2019
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI
https://doi.org/10.1007/s10853-019-03581-x

Weitere Artikel der Ausgabe 17/2019

Journal of Materials Science 17/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.