nach oben

Erschienen in:

19.04.2021 | Composites & nanocomposites

Interlaminar mechanical properties of nano- and short-aramid fiber reinforced glass fiber-aluminum laminates: a comparative study

verfasst von: Xinyu Qi, Xiaopeng Wu, Youkun Gong, Huiming Ning, Feng Liu, Rui Zou, Shengbing Zhou, Zengrui Song, Chenxin Xiang, Ning Hu

Erschienen in: Journal of Materials Science | Ausgabe 21/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Delamination damages limit the application potential of Fiber metal laminates, hence improving the interlaminar mechanical properties has always been a research focus and challenge in this field. The toughening effect of two fillers, i.e., nano-aramid fibers (ANFs) and short-aramid fibers (ASFs), which are used at the interface of glass fiber-aluminum laminates, have been investigated. Chemical pretreatments of aluminum alloy surface were conducted to ensure the better adherence between the fiber composites and metal sheets. Results revealed that Mode-I and Mode-II fracture toughness of the laminates could be simultaneously improved when using the two fillers at the interface of glass fiber-aluminum laminates. Attributed to the better dispersion of ANFs in epoxy matrix, the toughening performance of ANFs is better than that of ASFs in this case. The mechanism of interlaminar toughening was revealed with electron microscopic observation of fracture morphology. Meanwhile, the finite element analysis based on bilinear cohesive zone model was adopted to predict the increased interlaminar tensile and shear strength.

Vorheriger Artikel One-step environment-friendly process to design fire-resistant superhydrophobic carbon felts with excellent durability and oil–water separation performance

Nächster Artikel One-pot green extraction of high charge density cellulose nanocrystals with high yield for bionanocomposites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Beumler T (2004) Flying GLARE: A contribution to aircraft certification issues in strength properties in non-damaged and fatigue damaged GLARE structures

Vogelesang L, Vlot A (2000) Development of fiber metal laminates for advanced aerospace structures. J Mater Process Technol 103(1):1–5. https://doi.org/10.1016/S0924-0136(00)00411-8CrossRef

Vermeeren CAJR (2003) An historic overview of the development of fiber metal laminates. Appl Compos Mater 10(45):189–205. https://doi.org/10.1023/A:1025533701806CrossRef

Sinke J (2006) Development of fiber metal laminates: concurrent multi-scale modeling and testing. J Mater Sci 41(20):6777–6788. https://doi.org/10.1007/S10853-006-0206-5CrossRef

Morinière FD, Alderliesten RC, Benedictus R (2012) Development of fiber-metal laminates for improved impact performance. Eur Phys J Spec Top 206(1):79–88. https://doi.org/10.1140/EPJST/E2012-01589-YCrossRef

Hao X, Nie H, Ye Z, Luo Y, Zheng L, Liang W (2019) Mechanical properties of a novel fiber metal laminate based on a carbon fiber reinforced Zn–Al alloy composite. Mater Sci Eng A. 740–741:218–225. https://doi.org/10.1016/j.msea.2018.10.050CrossRef

Holbery J, Houston D (2006) Natural-fiber-reinforced polymer composites in automotive applications. JOM 58(11):80–86. https://doi.org/10.1007/s11837-006-0234-2CrossRef

Sadighi M, Alderliesten RC, Benedictus R (2012) Impact resistance of fiber-metal laminates: a review. Int J Impact Eng 49:77–90. https://doi.org/10.1016/J.IJIMPENG.2012.05.006CrossRef

Botelho EC, Silva RA, Pardini LC, Rezende MC (2006) A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures. Mater Res Ibero Am J Mater 9(3):247–256. https://doi.org/10.1590/S151614392006000300002CrossRef

10.

Asundi A, Choi AYN (1997) Fiber metal laminates: An advanced material for future aircraft. J Mater Process Technol 63:384–394. https://doi.org/10.1016/S0924-0136(96)02652-0CrossRef

11.

Sinmazçelik T, Avcu E, Bora MÖ, Coban O (2011) A review: Fiber metal laminates, background, bonding types and applied test methods. Mater Des 32(7):3671–3685. https://doi.org/10.1016/J.MATDES.2011.03.011CrossRef

12.

Cantwell WJ (2000) The mechanical properties of fiber-metal laminates based on glass fiber reinforced polypropylene. Compos Sci Technol 60(7):1085–1094. https://doi.org/10.1016/S0266-3538(00)00002-6CrossRef

13.

Lawcock GD, Ye L, Mai YW, Sun CT (1997) Effects of fiber/matrix adhesion on carbon-fiber-reinforced metal laminates – ii. impact behaviour. Compos Sci Technol 57(12):1621–1628. https://doi.org/10.1016/S0266-3538(97)00094-8CrossRef

14.

Park SY, Choi WJ, Choi HS, Kwon H (2010) Effects of surface pre-treatment and void content on glare laminate process characteristics. J Mater Process Technol 210(8):1008–1016. https://doi.org/10.1016/j.jmatprotec.2010.01.017CrossRef

15.

Li X, Tabil LG, Panigrahi S (2007) Chemical treatments of natural fiber for use in natural fiber-reinforced Composites: a review. J Polym Environ 15(1):25–33. https://doi.org/10.1007/S10924-006-0042-3CrossRef

16.

Harris AF, Beevers A (1999) The effects of grit-blasting on surface properties for adhesion. Int J Adhes Adhes 19(6):445–452. https://doi.org/10.1016/s0143-7496(98)00061-xCrossRef

17.

Kumar DA, Naidu AL (2018) A study on different chemical treatments for natural fiber reinforced composites. Int J Mech Prod Eng Res Dev. 8(5):143–152. https://doi.org/10.24247/IJMPERDOCT201818CrossRef

18.

Liang CS, Lv ZF, Bo Y, Xu SA (2015) Effect of modified polypropylene on the interfacialbonding of polymer–aluminum laminated films. Mater Des 81(9):141–148. https://doi.org/10.1016/j.matdes.2015.05.021CrossRef

19.

Karthi N, Kumaresan K, Sathish S et al (2020) An overview: natural fiber reinforced hybrid composites, chemical treatments and application areas. Mater Today: Proc 27:2828–2834. https://doi.org/10.1016/J.MATPR.2020.01.011CrossRef

20.

Ning H, Weng S, Hu N et al (2017) Mode-II interlaminar fracture toughness of GFRP/Al laminates improved by surface modified VGCF interleaves. Sci Eng Fac 114:365–372. https://doi.org/10.1016/j.compositesb.2017.02.022CrossRef

21.

Jin K, Wang H, Tao J et al (2019) Interface strengthening mechanisms of Ti/CFRP fibermetal laminate after adding MWCNTs to resin matrix. Compos Part B Eng 171:254–263. https://doi.org/10.1016/j.compositesb.2019.05.005CrossRef

22.

Ning H, Li Y, Li J et al (2015) Toughening effect of CB-epoxy interleaf on the interlaminar mechanical properties of CFRP laminates. Compos Part A Appl Sci Manuf 68:226–234. https://doi.org/10.1016/j.compositesa.2014.09.030CrossRef

23.

Sun Z, Hu X, Chen H (2014) Effects of aramid-fiber toughening on interfacial fracture toughness of epoxy adhesive joint between carbon-fiber face sheet and aluminium substrate. Int J Adhes Adhes 48:288–294. https://doi.org/10.1016/J.IJADHADH.2013.09.023CrossRef

24.

Tung SO, Thompson LT, Laramie S et al. (2015) Nanoporous aramid nanofiber separators for non-aqueous redox flow batteries. In: 228th ECS Meeting (October 11–15, 2015) (3): 244–244 doi https://doi.org/10.1016/J.COMPOSITESB.2015.03.010

25.

Liu Z, Lyu J, Fang D et al (2019) Nanofiberous kevlar aerogel threads for thermal insulation in harsh environments. ACS Nano 13(5):5703–5711. https://doi.org/10.1021/acsnano.9b01094CrossRef

26.

Xu L, Zhao X, Xu C et al (2018) Water-Rich biomimetic composites with abiotic self-organizing nanofiber network. Adv Mater 30(1):6. https://doi.org/10.1002/adma.201703343CrossRef

27.

Yang M, Cao K, Sui L et al (2011) Dispersions of aramid nanofibers: A new nanoscale building block. ACS Nano 5(9):6945–6954. https://doi.org/10.1021/nn2014003CrossRef

28.

Cao K, Siepermann CP, Yang M et al (2013) Reactive aramid nanostructures as high-performance polymeric building blocks for advanced composites. Adv Funct Mater 23(16):2072–2080. https://doi.org/10.1002/adfm.201202466CrossRef

29.

Nasser J, Lin J, Steinke K et al (2019) Enhanced interfacial strength of aramid fiber reinforced composites through adsorbed aramid nanofiber coatings. Compos sci Technol 174:125–133. https://doi.org/10.1016/J.COMPSCITECH.2019.02.025CrossRef

30.

Nasser J, Steinke K, Zhang L, Sodano HA (2020) Enhanced interfacial strength of hierarchical fiberglass composites through an aramid nanofiber interphase. Compos Sci Technol 192:108–109. https://doi.org/10.1016/J.COMPSCITECH.2020.108109CrossRef

31.

Yang B, Wang L, Zhang M, Luo J, Ding X (2019) Timesaving, high-efficiency approaches to fabricate aramid nanofibers (anfs). ACS Nano 13(7):7886–7897. https://doi.org/10.1021/acsnano.9b02258CrossRef

32.

Lin J, Bang SH, Malakooti MH et al (2017) Isolation of aramid nanofibers for high strength and toughness polymer nanocomposites. ACS Appl Mater Interfaces 9(12):11167–11175. https://doi.org/10.1021/acsami.7b01488CrossRef

33.

Zhang B, Wang W, Tian M et al (2020) Preparation of aramid nanofiber and its application in polymer reinforcement: A review. Eur Polym J 139:10. https://doi.org/10.1016/j.eurpolymj.2020.109996CrossRef

34.

Zhu J, Cao W, Yue M, Hou Y, Yang M (2015) Strong and stiff aramid nanofiber/carbon nanotube nanocomposites. ACS Nano 9(3):2489–2501. https://doi.org/10.1021/nn504927eCrossRef

35.

Wu X, Ning H, Liu Y et al (2020) Synergistic delamination toughening of glass fiber-aluminum laminates by surface treatment and graphene oxide interleaf. Nanoscale Res Lett 15(1):14. https://doi.org/10.1186/s11671-020-03306-zCrossRef

36.

Sun Z, Shi S, Hu X, Guo X, Chen J, Chen H (2015) Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal substrates with different surface morphology. Compos Part B Eng 77:38–45. https://doi.org/10.1016/j.compositesb.2015.03.010CrossRef

37.

JIS K (1993) 7086: Testing methods for interlaminar fracture toughness of carbon fiber reinforced plastics. pp. 28

38.

Nasser J, Zhang L, Sodano H (2020) Aramid nanofiber interlayer for improved interlaminar properties of carbon fiber/epoxy composites. Compos B Eng 197:11. https://doi.org/10.1016/j.compositesb.2020.108130CrossRef

39.

Patterson BA, Malakooti MH, Lin J, Okorom A, Sodano HA (2018) Aramid nanofibers for multiscale fiber reinforcement of polymer composites. Compos Sci Technol 161:92–99. https://doi.org/10.1016/j.compscitech.2018.04.005CrossRef

40.

Mohammadi R, Najafabadi MA, Saghafi H, Zarouchas D (2020) Fracture and fatigue behavior of carbon/epoxy laminates modified by nanofibers. Compos Part A Appl Sci Manuf 137:11. https://doi.org/10.1016/j.compositesa.2020.106015CrossRef

41.

Farmand-Ashtiani E, Cugnoni J, Botsis J (2015) Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite. Int J Solids Struct 55:58–65. https://doi.org/10.1016/j.ijsolstr.2014.03.031CrossRef

42.

Yang Q, Cox B (2005) Cohesive models for damage evolution in laminated composites. Int J Fract 133(2):107–137. https://doi.org/10.1007/s10704-005-4729-6CrossRef

Titel: Interlaminar mechanical properties of nano- and short-aramid fiber reinforced glass fiber-aluminum laminates: a comparative study
verfasst von: Xinyu Qi
Xiaopeng Wu
Youkun Gong
Huiming Ning
Feng Liu
Rui Zou
Shengbing Zhou
Zengrui Song
Chenxin Xiang
Ning Hu
Publikationsdatum: 19.04.2021
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 21/2021
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-021-06003-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 21/2021

A review of the design of high-entropy aluminum alloys: a pathway for novel Al alloys

Rheology of cellulose nanofibrils and silver nanowires for the development of screen-printed antibacterial surfaces

Applications of carbon quantum dots in lubricant additives: a review

Bioinspired thermal/light-tunable actuators based on predesigned tilted liquid crystal actuators

Formaldehyde gas sensing properties of transition metal-doped graphene: a first-principles study

Spectroscopic investigations of gamma-ray irradiation effects on metal organic framework

Premium Partner

Marktübersichten