Skip to main content


International Journal of Material Forming

International Journal of Material Forming 3/2020

Ausgabe 3/2020

Inhaltsverzeichnis ( 11 Artikel )

03.07.2019 | Original Research | Ausgabe 3/2020

Effects of resin content and precompression treatment on bulk bamboo extrusion

Masako Seki, Yuko Yashima, Tsunehisa Miki, Tomoaki Kiryu, Soichi Tanaka, Kozo Kanayama

16.08.2019 | Original Research | Ausgabe 3/2020

Picture-frame testing of woven prepreg fabric: An investigation of sample geometry and shear angle acquisition

Christian Krogh, Kari D. White, Alessandro Sabato, James A. Sherwood

29.08.2019 | Original Research | Ausgabe 3/2020

Warm deep drawing behavior of Inconel 625 alloy using constitutive modelling and anisotropic yield criteria

Nitin Kotkunde, Anand Badrish, Ayush Morchhale, Prathamesh Takalkar, Swadesh Kumar Singh

06.05.2020 | Original Research | Ausgabe 3/2020

Influence of thickness reduction on forming limits of mild steel DC01

Pedram Farahnak, Miroslav Urbánek, Pavel Konopík, Jan Džugan

03.01.2020 | Original Research | Ausgabe 3/2020

Mechanical and metallurgical characterization of AA6082-T6 sheet-bulk joints produced through a linear friction welding based approach

Gianluca Buffa, Dario Baffari, Antonio Barcellona, Davide Campanella, Livan Fratini

03.01.2020 | Original Research | Ausgabe 3/2020

Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets

Camille M. Poulin, Sven C. Vogel, Yannis P. Korkolis, Brad L. Kinsey, Marko Knezevic

04.03.2020 | Original Research | Ausgabe 3/2020

Advanced FE model validation of cold-forming process using DIC: Air bending of high strength steel

S. Gothivarekar, S. Coppieters, A. Van de Velde, D. Debruyne

02.04.2020 | Original Research | Ausgabe 3/2020

Electromagnetic flanging: from elementary geometries to aeronautical components

Cheikh Tidiane Sow, Grégoire Bazin, Thomas Heuzé, Guillaume Racineux

27.02.2020 | Original Research | Ausgabe 3/2020

Influence of material modeling on warm forming behavior of nickel based super alloy

Anand Badrish, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh

04.05.2020 | Original Research | Ausgabe 3/2020 Open Access

From specified product tolerance to acceptable material and process scatter: an inverse robust optimization approach

O. Nejadseyfi, H. J. M. Geijselaers, E. H. Atzema, M. Abspoel, A. H. van den Boogaard

13.05.2020 | Original Research | Ausgabe 3/2020

Constitutive behavior and hot workability of multi-direction forged T2 copper during hot compression deformation

Hongming Zhang, Jing Wang, Guobin Liu, Gang Chen, Fei Han

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.