Skip to main content


International Journal of Material Forming

International Journal of Material Forming 4/2019

Ausgabe 4/2019

Inhaltsverzeichnis ( 17 Artikel )

27.07.2018 | Original Research | Ausgabe 4/2019

Effects of material and process parameters on in-situ consolidation

Angel Leon, Clara Argerich, Anais Barasinski, Eric Soccard, Francisco Chinesta

20.07.2018 | Original Research | Ausgabe 4/2019

Influence of strain parameters at rolling on the properties of wire-reinforced aluminium composites

Yaroslav Frolov, Mykhailo Stolbchenko, Olexandr Grydin, Hanna Makeeva, Michael A. Tershakovec, Mirko Schaper

20.07.2018 | Original Research | Ausgabe 4/2019

The effects of pressure control technique on hot gas blow forming of Mg AZ31 sheets

Mohammad A. Nazzal, Abdul Ghani Al Sabouni

06.08.2018 | Original Research | Ausgabe 4/2019

Adaptive metamodel-assisted shape optimization for springback in metal forming processes

Van-Tuan Dang, Carl Labergère, Pascal Lafon

30.07.2018 | Original Research | Ausgabe 4/2019 Open Access

Investigation of the effect of forming parameters in incremental sheet forming using a micromechanics based damage model

Shakir Gatea, Bin Lu, Jun Chen, Hengan Ou, Graham McCartney

14.09.2018 | Original Research | Ausgabe 4/2019

Optimum clearance determination in blanking coarse-grained non-oriented electrical steel sheets: experiment and simulation

Ji He, Zhe Wang, Shuhui Li, Liang Dong, Xudong Cao, Weigang Zhang

18.08.2018 | Original Research | Ausgabe 4/2019

On the study of mystical materials identified by indentation on power law and Voce hardening solids

L. Meng, P. Breitkopf, B. Raghavan, G. Mauvoisin, O. Bartier, X. Hernot

08.08.2018 | Original Research | Ausgabe 4/2019

Predictive and control models of the spring-back in thick hull plate forming

Lin-Zhi Xu, Wei Shen, Ren-jun Yan

27.09.2018 | Original Research | Ausgabe 4/2019

An EIGA driven coupled of electromagnetic-thermal field modeling in the induction melting process

Feng Shan, Min Xia, Chang-Chun Ge

11.09.2018 | Original Research | Ausgabe 4/2019

Single point incremental forming of AA6061 thin sheet: calibration of ductile fracture models incorporating anisotropy and post forming analyses

Shamik Basak, K. Sajun Prasad, Ajay M. Sidpara, Sushanta Kumar Panda

18.08.2018 | Original Research | Ausgabe 4/2019

Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension

Hamed Mirzadeh

27.09.2018 | Original Research | Ausgabe 4/2019

Modelling strategies and FEM approaches to characterize micro-sandwich sheets with unknown core properties

Anthony Michael Fernandes Pimentel, José Luís de Carvalho Martins Alves, Nuno Miguel de Seabra Merendeiro, Tiago Soares

17.09.2018 | Original Research | Ausgabe 4/2019

Numerical modeling of local capillary effects in porous media as a pressure discontinuity acting on the interface of a transient bi-fluid flow

Koloina Andriamananjara, Nicolas Moulin, Julien Bruchon, Pierre-Jacques Liotier, Sylvain Drapier

02.10.2018 | Original Research | Ausgabe 4/2019

A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals

Omid Majidi, Mohammad Jahazi, Nicolas Bombardier

02.10.2018 | Original Research | Ausgabe 4/2019

An extension of Rice localization criterion to predict the onset of shear localization in semi-solid materials

M. H. Sheikh-Ansari, M. Aghaie-Khafri

17.10.2018 | Original Research | Ausgabe 4/2019

Hybrid constitutive modeling: data-driven learning of corrections to plasticity models

Rubén Ibáñez, Emmanuelle Abisset-Chavanne, David González, Jean-Louis Duval, Elias Cueto, Francisco Chinesta

17.10.2018 | Original Research | Ausgabe 4/2019

Process-induced defects in an L-shape profile ring rolling process

Il Yeong Oh, Tae Woo Hwang, Young Yoon Woo, Hye Jeong Yun, Young Hoon Moon

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.