Skip to main content
main-content

Zeitschrift

International Journal on Interactive Design and Manufacturing (IJIDeM)

International Journal on Interactive Design and Manufacturing (IJIDeM) 2/2019

Ausgabe 2/2019

Inhaltsverzeichnis ( 30 Artikel )

23.06.2018 | Original Paper | Ausgabe 2/2019

The numerical study of the effect of design parameters on EWOD actuation in microchannels of rectangular cross section

Sajad Pooyan, Mohammad Passandideh-Fard

16.06.2018 | Original Paper | Ausgabe 2/2019

Non-contact auxiliary fixture for machining stability improvement of thin flexible workpieces using eddy currents

Robinderpal Singh, Ibrahim M. Deiab

22.06.2018 | Original Paper | Ausgabe 2/2019

Improving failure mode and effect analysis (FMEA) with consideration of uncertainty handling as an interactive approach

Mohammad Yazdi

26.03.2018 | Original Paper | Ausgabe 2/2019

Unique transfer of functional requirements into manufacturing dimensions in an interactive design context

Maroua Ghali, Mehdi Tlija, Eric Pairel, Nizar Aifaoui

16.04.2018 | Original Paper | Ausgabe 2/2019

A two-bar truss structural model under uncertainty: a uncertain chance constrained geometric programming (UCCGP) approach

Wasim Akram Mandal

26.04.2018 | Original Paper | Ausgabe 2/2019

The distribution of frictional heat generated between the contacting surfaces of the friction clutch system

Oday I. Abdullah, Josef Schlattmann, Mahir H. Majeed, Laith A. Sabri

13.10.2018 | Original paper | Ausgabe 2/2019

Alternative elliptic integral solution to the beam deflection equations for the design of compliant mechanisms

Alessandro Cammarata, Michele Lacagnina, Gaetano Sequenzia

05.12.2018 | Original paper | Ausgabe 2/2019

Off-line programming of an industrial robot in a virtual reality environment

Evgenia Manou, George-Christopher Vosniakos, Elias Matsas

05.12.2018 | Original paper | Ausgabe 2/2019

Parameters effects analysis of rotary ultrasonic machining on carbon fiber reinforced plastic (CFRP) composite using an interactive RSM Method

A. Slimane, S. Slimane, S. Kebdani, M. Chaib, S. Dahmane, B. Bouchouicha, N. Sardi, S. Adjim

07.12.2018 | Original paper | Ausgabe 2/2019

Portfolio optimization based on fuzzy entropy

Mohamadtaghi Rahimi, Pranesh Kumar

07.12.2018 | Original paper | Ausgabe 2/2019

Multiphysics modeling and simulation of laser additive manufacturing process

Khalil Khanafer, Ali Al-Masri, Shashikant Aithal, Ibrahim Deiab

08.12.2018 | Original paper | Ausgabe 2/2019 Open Access

Computation of the stress intensity factor KI for external longitudinal semi-elliptic cracks in the pipelines by FEM and XFEM methods

S. El Fakkoussi, H. Moustabchir, A. Elkhalfi, C. I. Pruncu

11.12.2018 | Original paper | Ausgabe 2/2019 Open Access

Dynamic effects on cutting forces with highly positive versus highly negative cutting edge geometries

A. Agic, M. Eynian, J.-E. Ståhl, T. Beno

13.12.2018 | Original paper | Ausgabe 2/2019

Quantitative and qualitative study of methods for solving the kinematic problem of a planar parallel manipulator based on precision error optimization

Sid-Ahmed Dahmane, Abdelwahab Azzedine, Abdelkader Megueni, Abdelkader Slimane

18.12.2018 | Original Paper | Ausgabe 2/2019

Prototyping adaptive systems in smart environments using virtual reality

Francesca Gullà, Roberto Menghi, Alessandra Papetti, Marina Carulli, Monica Bordegoni, Andrea Gaggioli, Michele Germani

02.01.2019 | Original Paper | Ausgabe 2/2019

An improved FMEA analysis method based on QFD and TOPSIS theory

Ying-Kui Gu, Zi-xin Cheng, Guang-qi Qiu

02.01.2019 | Original Paper | Ausgabe 2/2019

The effect of postural freedom to increase the neutral positions during laparoscopic surgery

Horacio M. Pace-Bedetti, José F. Dolz, José L. Martínez-de-Juan, Andrés Conejero

12.01.2019 | Original Paper | Ausgabe 2/2019

Numerical simulation of thermally developing turbulent flow through a cylindrical tube

Ali Belhocine, Oday Ibraheem Abdullah

14.01.2019 | Original Paper | Ausgabe 2/2019

Comparative study of a topologically optimized lower limb prosthesis

Tapan Jansari, Ibrahim Deiab

16.01.2019 | Original Paper | Ausgabe 2/2019

How professional designers use magic-based inspirations: development of a usage guideline and analysis of impact on design process

Lalita Haritaipan, Celine Mougenot, Miki Saijo

17.01.2019 | Original Paper | Ausgabe 2/2019

Haptic Augmented Reality (HapticAR) for assembly guidance

J. C. Arbeláez, Roberto Viganò, Gilberto Osorio-Gómez

17.01.2019 | Original Paper | Ausgabe 2/2019

Optimization of flexural strength of CFRP hybrid nano composites containing nanoZnO and nanoclay particles

Shailesh D. Ambekar, Vipin Kumar Tripathi

06.02.2019 | Original Paper | Ausgabe 2/2019

A CAE method for ergonomic assessment of motorcycles’ driver and passenger

Filippo Cucinotta, Eugenio Guglielmino, Felice Sfravara

08.02.2019 | Original Paper | Ausgabe 2/2019

Technological innovations and practices in engineering education: a review

Marcela Hernandez-de-Menendez, Ruben Morales-Menendez

09.02.2019 | Original Paper | Ausgabe 2/2019

Interactive virtual technologies in engineering education: Why not 360° videos?

Maria Grazia Violante, Enrico Vezzetti, Pietro Piazzolla

03.04.2019 | Original Paper | Ausgabe 2/2019

Exploratory study on the perception of additively manufactured end-use products with specific questionnaires and eye-tracking

Yuri Borgianni, Lorenzo Maccioni, Demis Basso

12.04.2019 | Original Paper | Ausgabe 2/2019 Open Access

Human centred design and evaluation of cabin interiors for business jet aircraft in virtual reality

Francesca De Crescenzio, Sara Bagassi, Severine Asfaux, Nigel Lawson

15.12.2018 | Technical Paper | Ausgabe 2/2019

Interactive design of space manufacturing systems, optimality and opportunity

Mohammed Amine Zafrane, Abdelamdjid Boudjemai, Nabil Boughanmi

12.01.2019 | Technical Paper | Ausgabe 2/2019

Effect of friction stir welding (FSW) parameters on the peak temperature and the residual stresses of aluminum alloy 6061-T6: numerical modelisation

Mustapha Kaid, Mokhtar Zemri, Abdessamad Brahami, Samir Zahaf

03.01.2019 | Technical Paper | Ausgabe 2/2019

Optimization of machining parameters of 2.25Cr1Mo0.25V steel based on response surface method and genetic algorithm

Wei Zhang, Lei Zhang, Shuqi Wang, Baichen Ren, Shuai Meng

Aktuelle Ausgaben

Premium Partner

    Bildnachweise