Skip to main content
main-content

Zeitschrift

International Journal on Interactive Design and Manufacturing (IJIDeM)

International Journal on Interactive Design and Manufacturing (IJIDeM) 3/2019

Ausgabe 3/2019

Inhaltsverzeichnis ( 30 Artikel )

18.01.2019 | Original Paper | Ausgabe 3/2019

The design methodology and characteristics analysis of a uniform-variable non-circular gear drive

Jian Wang, Jianming Fan, Yong Feng

18.01.2019 | Original Paper | Ausgabe 3/2019

Integration of mechanical deformation and optical losses in the design of linear Fresnel solar collectors

Mehdi El Amine, Mohammed Sallaou

18.01.2019 | Original Paper | Ausgabe 3/2019

Numerical analysis of cam and follower based on the interactive design approach

Amjad Al-Hamood, Hazim U. Jamali, Oday I. Abdullah, Adolfo Senatore, Hakan Kaleli

19.01.2019 | Original Paper | Ausgabe 3/2019

A design methodology for the virtual energy labelling of cooking ovens

Daniele Landi, Paolo Cicconi, Michele Germani

29.01.2019 | Original Paper | Ausgabe 3/2019

Identification of relevant parameters for the metrological adjustment of thermal machine models

Steffen Schroeder, Bernd Kauschinger, Arvid Hellmich, Steffen Ihlenfeldt, Damien Phetsinorath

08.02.2019 | Original Paper | Ausgabe 3/2019

Interactive energetic, environmental and economic analysis of renewable hybrid energy system

Daniele Landi, Vincenzo Castorani, Michele Germani

28.01.2019 | Original Paper | Ausgabe 3/2019

Dynamics and lubrication analyses of scotch yoke mechanism

Amjad Al-Hamood, Hazim U. Jamali, Oday I. Abdullah, Adolfo Senatore

13.02.2019 | Original Paper | Ausgabe 3/2019

Active learning in engineering education. A review of fundamentals, best practices and experiences

Marcela Hernández-de-Menéndez, Antonio Vallejo Guevara, Juan Carlos Tudón Martínez, Diana Hernández Alcántara, Ruben Morales-Menendez

14.02.2019 | Original Paper | Ausgabe 3/2019

Designing a teaching guide for the use of simulations in undergraduate robotics courses: a pilot study

Salvador González-García, Jorge Rodríguez-Arce, Gerardo Loreto-Gómez, Víctor M. Montaño-Serrano

15.02.2019 | Original Paper | Ausgabe 3/2019 Open Access

Development of virtual reality support to factory layout planning

Liang Gong, Jonatan Berglund, Åsa Fast-Berglund, Björn Johansson, Zhiping Wang, Tobias Börjesson

15.02.2019 | Original Paper | Ausgabe 3/2019

Virtual reality laboratories: a review of experiences

Marcela Hernández-de-Menéndez, Antonio Vallejo Guevara, Ruben Morales-Menendez

18.02.2019 | Original Paper | Ausgabe 3/2019

Prediction of a flying droplet landing over a non-flat substrates for ink-jet applications

Ivan Arango, Leonardo Bonil, David Posada, Javier Arcila

02.03.2019 | Original Paper | Ausgabe 3/2019

Toward a customized multicriterion tool for product evaluation in the early design phases: the CMDET methodology

Kévin Audoux, Frédéric Segonds, Olivier Kerbrat, Améziane Aoussat

25.03.2019 | Original Paper | Ausgabe 3/2019

Strengthening critical thinking in engineering students

Patricia Caratozzolo, Alvaro Alvarez-Delgado, Samira Hosseini

09.04.2019 | Original Paper | Ausgabe 3/2019

Nanotechnology learning through product development

María del Socorro Tamez Ramírez, Yadira I. Vega-Cantú

11.04.2019 | Original Paper | Ausgabe 3/2019

Optimization of required torque and energy consumption in the roll forming process

Behrooz Shirani Bidabadi, Hassan Moslemi Naeini, Roohollah Azizi Tafti, Yaser Tajik

24.04.2019 | Original Paper | Ausgabe 3/2019

Jewels mechanics: structural research applied in conception and development

Felipe A. Schwab, Branca F. de Oliveira

24.04.2019 | Original Paper | Ausgabe 3/2019

An Augmented Reality approach to factory layout design embedding operation simulation

Andreas Kokkas, George-Christopher Vosniakos

10.05.2019 | Original Paper | Ausgabe 3/2019

Influence of the method used in the generation of valid engineering concepts

Roberto Duran-Novoa, Jorge Lozoya-Santos, Ricardo Ramírez-Mendoza, Felipe Torres-Benoni, Adriana Vargas-Martínez

13.05.2019 | Original Paper | Ausgabe 3/2019

Reducing welding repair requirements in refinery pressure vessel manufacturing: a case study applying six sigma principles

Ahmadreza Rezaei, Mohammad Ehsanifar, David A. Wood

15.05.2019 | Original Paper | Ausgabe 3/2019

Challenge based learning: the importance of world-leading companies as training partners

Jorge Membrillo-Hernández, Miguel J. Ramírez-Cadena, Mariajulia Martínez-Acosta, Enrique Cruz-Gómez, Enrique Muñoz-Díaz, Hugo Elizalde

15.05.2019 | Original Paper | Ausgabe 3/2019

‘Federica’s MOOC’ (Massive Open Online Course): a blended course in engineering drawing at Federico II

Antonio Lanzotti, Mauro Calise, Maddalena Molaro, Stefano Papa, Stanislao Patalano, Fabrizio Renno

18.05.2019 | Original Paper | Ausgabe 3/2019 Open Access

Experiential learning at Lean-Thinking-Learning Space

Claudia Lizette Garay-Rondero, Ericka Zulema Rodríguez Calvo, David Ernesto Salinas-Navarro

02.03.2019 | Original Paper | Ausgabe 3/2019

An experimental investigation on the relationship between perceived assembly complexity and product design complexity

Bugra Alkan

23.03.2019 | Original Paper | Ausgabe 3/2019

Learning based on flipped classroom with just-in-time teaching, Unity3D, gamification and educational spaces

Elizabeth Toriz

24.04.2019 | Original Paper | Ausgabe 3/2019

An adapted case-based reasoning system for design and manufacturing of tailored forming multi-material components

Renan Siqueira, Mehdi Bibani, Deniz Duran, Iryna Mozgova, Roland Lachmayer, Bernd-Arno Behrens

10.05.2019 | Short Original Paper | Ausgabe 3/2019

Optimizing performance in spark ignition engines with simulation metamodels

Erika Zutta, Diego Acosta, Gabriel Diaz

21.01.2019 | Technical Paper | Ausgabe 3/2019

Modeling and parametric optimization of FDM 3D printing process using hybrid techniques for enhancing dimensional preciseness

Sandeep Deswal, Rajan Narang, Deepak Chhabra

06.02.2019 | Technical Paper | Ausgabe 3/2019

Influence of forming parameters on the crash performance of capped cylindrical tubes using LS-DYNA follow-on simulations

A. Praveen Kumar, S. Shrivaathsav

26.04.2019 | Technical Paper | Ausgabe 3/2019

Verification of perception difference between actual space and VR space in car design

Takumi Kato

Aktuelle Ausgaben

Premium Partner

    Bildnachweise