Investigating the pulse short electric arc milling of Ti6Al4V alloy

In this study, the machining characteristics of pulse short arc milling (SEAM) Ti6Al4V alloy were studied. In this regard, the influence of SEAM parameters on the material removal rate (MRR), relative electrode wear ratio (REWR), and surface integrity of Ti6Al4V is studied. A wide variety of processing parameters, including different voltages, frequencies, duty cycles, flushing pressures, electrode rotation speeds, and electrode feed rates, are considered in the investigation. Scanning electron microscope (SEM), energy dispersive spectrograph (EDS), and micro-hardness analysis are applied to analyze results. Moreover, a multichannel data acquisition system is used to measure gap voltage and gap current. Obtained results cover the variation of MRR, REWR, surface roughness (Ra), average resolidified layer thickness, and average heat-affected zone thickness with different processing parameters. Furthermore, the electrode surface morphology and chemical composition of the negative growth of REWR are studied. Based on the obtained results, the microstructure of the resolidified layer and heat-affected zone of the workpiece cross-section is confirmed. This study provides a basis for the high-quality pulse SEAM technology of difficult-to-machine (DTM) materials to enter the semi-finishing field.