Investigation of engineering properties for usability of Lefke stone (Osmaneli/Bilecik) as building stone

Lefke stone is a sandstone that has been widely used in mosques, madrasas, churches, and houses as building stone. The geological features and engineering properties of Lefke stone outcropped in the southern part of Osmaneli/Bilecik were investigated in field and laboratory studies. Samples acquired during the fieldwork were tested to determine the physical, mechanical, durability, and hygrothermal properties in the laboratory. The mean physico-mechanical properties of Lefke stone yielded apparent density of 2.38 g/cm³, specific gravity of 2.68 g/cm³, total porosity of 11.26%, 2.93% water absorption by weight, uniaxial compressive strength of 94 MPa, flexure strength of 11.45 MPa, a 3.90 MPa point load strength, 4.5–5 Mohs hardness, and field Schmidt hammer rebound value of 36. According to durability tests, Lefke stone is resistant to CaCl₂ salt mist but has low resistance to SO₂ aging. Salt crystals placed in the discontinuities of the rock caused slight crack growth. The stone’s resistance to crystallization of sodium sulphate salt is low, and an increase in the volume of salts crystallized in the rock results in low corner strengths. A capillary water-absorption value of 0.0016 kg/m².h places Lefke stone into the category of very low water absorption capacity and permeability. The water vapor diffusion resistance factor (μ) less than 1 indicates that the sandstone has high breathability. Its performance in historical buildings, field observations, and values obtained through laboratory tests confirm that Lefke sandstone can be used as a building stone.