Skip to main content
Erschienen in: Thermal Engineering 6/2020

01.06.2020 | STEAM BOILERS, POWER PLANT FUELS, BURNER UNITS, AND BOILER AUXILIARY EQUIPMENT

Investigation of the Combustion Process of Solid Fuel in Furnaces with Direct-Flow Burners

verfasst von: E. P. Volkov, V. B. Prokhorov, S. L. Chernov, V. S. Kirichkov, A. A. Kaverin

Erschienen in: Thermal Engineering | Ausgabe 6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The optimization of the boiler furnace’s aerodynamics is considered in order to increase the efficiency of burning power-generating fuel by the example of burning lean Kuznetsk coal in a solid slag removal scheme. Combustion options have been proposed and investigated in schemes with direct injection of coal dust and with an intermediate coal dust hopper. The schemes use direct-flow burners with an counter-displaced arrangement and nozzles with a downward inclination, and staged combustion of fuel is used. A study of the furnace’s aerodynamics on an isothermal bench was carried out. The results of physical modeling were compared with the data of numerical modeling of an isothermal bench. It is noted that combustion schemes differ in the intensity of vortex formation in the active combustion zone. A numerical simulation of fuel combustion in the boiler furnace was performed using the two indicated combustion schemes. The purpose of the simulation was to obtain the distribution of temperatures, gas velocities, concentrations of combustion products, nitrogen oxide emissions, degree of burnout in the furnace volume and other characteristics that affect the efficiency, reliability, and environmental safety of the boiler. The results of model studies showed that the developed schemes provide high efficiency of burning lean Kuznetsk coal with solid slag removal and, at the same time, low emissions of nitrogen oxides. An additional verification of the numerical model was carried out by comparing the gas temperatures by the height of the furnace obtained by its numerical simulation and thermal zone calculations. A comparison of the temperatures of the gases at the outlet of each zone showed their good agreement (the difference was no more than 30°C).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat A. M. Arkhipov, Yu. M. Lipov, and V. B. Prokhorov, Use of Direct-Flow Burners and Nozzles in Boiler Furnaces: Innovative Experience of Moscow Power Engineering Institute (Mosk. Energ. Inst., Moscow, 2013) [in Russian]. A. M. Arkhipov, Yu. M. Lipov, and V. B. Prokhorov, Use of Direct-Flow Burners and Nozzles in Boiler Furnaces: Innovative Experience of Moscow Power Engineering Institute (Mosk. Energ. Inst., Moscow, 2013) [in Russian].
2.
Zurück zum Zitat A. M. Arkhipov, A. A. Kanunnikov, V. S. Kirichkov, V. B. Prokhorov, M. V. Fomenko, and S. L. Chernov, “Efficiency of using direct-flow burners and nozzles in implementation of dry-bottom ash removal at the TPP-210A boiler furnace,” Therm. Eng. 64, 134–141 (2017). https://doi.org/10.1134/S004060151702001X CrossRef A. M. Arkhipov, A. A. Kanunnikov, V. S. Kirichkov, V. B. Prokhorov, M. V. Fomenko, and S. L. Chernov, “Efficiency of using direct-flow burners and nozzles in implementation of dry-bottom ash removal at the TPP-210A boiler furnace,” Therm. Eng. 64, 134–141 (2017). https://​doi.​org/​10.​1134/​S004060151702001​X CrossRef
3.
4.
Zurück zum Zitat E. P. Volkov, Selected Works, Vol. 3: Modeling of Combustion and Pyrolysis Processes of Solid Fuels (Mosk. Energ. Inst., Moscow, 2014) [in Russian]. E. P. Volkov, Selected Works, Vol. 3: Modeling of Combustion and Pyrolysis Processes of Solid Fuels (Mosk. Energ. Inst., Moscow, 2014) [in Russian].
5.
Zurück zum Zitat Ya. A. Korkodinov, “ Overview of k–ε-models for turbulence simulation,” Vestn. PNIPU, Mashinostr., Materialoved. 15 (2), 5–16 (2013). Ya. A. Korkodinov, “ Overview of k–ε-models for turbulence simulation,” Vestn. PNIPU, Mashinostr., Materialoved. 15 (2), 5–16 (2013).
6.
Zurück zum Zitat L. I. Darvell, L. Ma, J. M. Jones, M. Pourkashanian, and N. Williams, “Some aspects of modelling NOx formation arising from the combustion of 100% wood in a pulverised fuel furnace,” Combust. Sci. Technol. 186, 672–683 (2014).CrossRef L. I. Darvell, L. Ma, J. M. Jones, M. Pourkashanian, and N. Williams, “Some aspects of modelling NOx formation arising from the combustion of 100% wood in a pulverised fuel furnace,” Combust. Sci. Technol. 186, 672–683 (2014).CrossRef
7.
Zurück zum Zitat Calculation and Design of Dust Preparation Units for Boiler Aggregates (Regulatory Materials), Ed. by N. V. Sokolov and M. L. Kisel’gof (TsKTI, Leningrad, 1971) [in Russian]. Calculation and Design of Dust Preparation Units for Boiler Aggregates (Regulatory Materials), Ed. by N. V. Sokolov and M. L. Kisel’gof (TsKTI, Leningrad, 1971) [in Russian].
8.
Zurück zum Zitat N. V. Kuznetsov, Thermal Calculation of Boiler Aggregates (Normative Method) (Energiya, Moscow, 1973) [in Russian]. N. V. Kuznetsov, Thermal Calculation of Boiler Aggregates (Normative Method) (Energiya, Moscow, 1973) [in Russian].
9.
Zurück zum Zitat Thermal Calculation of Boilers (Normative Method), Ed. by G. M. Kagan, 3rd ed. (Vseross. Teplotekh. Inst., St. Petersburg, 1998) [in Russian]. Thermal Calculation of Boilers (Normative Method), Ed. by G. M. Kagan, 3rd ed. (Vseross. Teplotekh. Inst., St. Petersburg, 1998) [in Russian].
10.
Zurück zum Zitat GOST R 50831-95. Boiler Units. Thermomechanical Equipment. General Technical Requirements (Izd. Standartov, Moscow, 1996). GOST R 50831-95. Boiler Units. Thermomechanical Equipment. General Technical Requirements (Izd. Standartov, Moscow, 1996).
Metadaten
Titel
Investigation of the Combustion Process of Solid Fuel in Furnaces with Direct-Flow Burners
verfasst von
E. P. Volkov
V. B. Prokhorov
S. L. Chernov
V. S. Kirichkov
A. A. Kaverin
Publikationsdatum
01.06.2020
Verlag
Pleiades Publishing
Erschienen in
Thermal Engineering / Ausgabe 6/2020
Print ISSN: 0040-6015
Elektronische ISSN: 1555-6301
DOI
https://doi.org/10.1134/S0040601520060117

Weitere Artikel der Ausgabe 6/2020

Thermal Engineering 6/2020 Zur Ausgabe

HEAT AND MASS TRANSFER AND PROPERTIES OF WORKING FLUIDS AND MATERIALS

The Flow Boiling Crisis of Saturated Water in Pipes at High Pressures

    Premium Partner