nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Investigation of the Surface Layer Hardness When Grinding Sintered Porous Workpieces

verfasst von : Oleg Zabolotnyi, Tetiana Bozhko, Tetiana Halchuk, Olha Zaleta, Dagmar Cagáňová

Erschienen in: Advances in Design, Simulation and Manufacturing V

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The essential properties of sintered powder materials are porosity and hardness. It is established that a part made through powder metallurgy methods is exposed to external factors during the finishing stages. It leads to changes in the surface layer’s characteristics of the part. The experimental research program provided definitions of the influence of transverse feed, cutting speed, and porosity on the hardness of a surface layer and its consolidation. The optimal modes of grinding porous workpieces acquired by isostatic pressing of powder materials with further sintering were obtained. Their surface layers are compacted mainly due to the grinding of porous workpieces. The treatment of porous iron parts by grinding increases the microhardness of the surface layer, yet increasing the transverse feed reduces it. Also, it was found that increasing the hardness of the surface layer of the porous workpiece after grinding is possible because of additional movements of the tool without transverse feed.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Influence of Turning Operations on Waviness Characteristics of Working Surfaces of Rolling Bearings

Nächstes Kapitel Control of the Physical and Mechanical Properties of Mixtures Based on Liquid Glass with Various Fillers

Povstyanoi, O.Y., Rud’, V.D., Samchuk, L.M., Zubovets’ka, N.T.: Production of porous materials with the use of energy-saving technologies. Mater. Sci. 51(6), 847–853 (2016). https://doi.org/10.1007/s11003-016-9912-6CrossRef

Boginsky, L., Reut, O., Piatsiushyk, Y., et al.: The development of processes of pressing of articles from powders on the bases of metals. Ceramics and graphite. In: 15 International Plansee Seminar, Reutte, Austria, vol. 3, pp. 197–209 (2001)

Zablotskyi, V., Tkachuk, A., Moroz, S., Prystupa, S., Svirzhevskyi, K.: Influence of technological methods of processing on wear resistance of conjugated cylindrical surfaces. In: Tonkonogyi, V., et al. (eds.) Advanced Manufacturing Processes II. Lecture Notes in Mechanical Engineering, pp. 477–487. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-68014-5_47CrossRef

Povstyanoy, O., MacMillan, A.: Mechatronic system’s permeable materials with controlled porosity. J. Eng. Sci. 8(1), C45–C49 (2021). https://doi.org/10.21272/jes.2021.8(1).c6CrossRef

Tkachuk, A., Zablotskyi, V., Kononenko, A., Moroz, S., Prystupa, S.: Directed formation of quality, as a way of improving the durability of conjugated parts of friction Pairs. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing II. Lecture Notes in Mechanical Engineering, pp. 370–377. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-22365-6_37CrossRef

Redko, R., Zabolotnyi, O., Redko, O., Savchuk, S., Kovalchuk, V.: Improvement of manufacturing technology and recovery of clamping collets for lathe automats. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing II. Lecture Notes in Mechanical Engineering, pp. 290–301. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-22365-6_29CrossRef

Jackson, M.J., Toward, M.J.: Grinding and abrasive machining of composite materials. In: Shyha, I., Huo, D. (eds.) Advances in Machining of Composite Materials. Engineering Materials, pp. 459–483. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-71438-3_17CrossRef

Mel’nik, V.M., Rud’, V.D., Mel’nik, Y.A.: Mathematical formalism of pore stereology of powder materials. Powder Metall. Met. Ceram. 53(1–2), 107–112 (2014). https://doi.org/10.1007/s11106-014-9592-4CrossRef

Zablotskyi, V., Moroz, S., Tkachuk, A., Prystupa, S., Zabolotnyi, O.: Influence of diamond smoothering treatment power parameters on microgeometry of working surfaces of conjugated parts. In: Tonkonogyi, V., et al. (eds.) Advanced Manufacturing Processes. Lecture Notes in Mechanical Engineering, pp. 372–381. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-40724-7_38CrossRef

10.

Chernobrovchenko, V.S., Dyadyura, K.O., Balynskyi, M., Panda, A.: Influence of technological manufacturing conditions on the porosity of calcium-phosphate scaffolds. J. Eng. Sci. 8(1), C18–C28 (2021). https://doi.org/10.21272/jes.2021.8(1).c3CrossRef

11.

Zabolotnyi, O., Pasternak, V., Andrushchak, I., Ilchuk, N., Svirzhevskyi, K.: Numerical simulation of the microstructure of structural-inhomogeneous materials. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds.) Advances in Design, Simulation and Manufacturing III. Lecture Notes in Mechanical Engineering, pp. 562–571. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-50794-7_55CrossRef

12.

Causton, R., Schade, C.: Machinability: a material property or process response. In: Lawcock, R., Wright, M. (eds) Advances in Powder Metallurgy & Particulate Materials Metal Powder Industries Federation, part 7, Princeton, NJ, pp. 154–69 (2003)

13.

M’Saoubi, R., Czotscher, T., Andersson, O., Meyer, D.: Machinability of powder metallurgy steels using PcBN inserts. Proc. CIRP 14, 83–88 (2014). https://doi.org/10.1016/j.procir.2014.03.094CrossRef

14.

Dayong, Y., Longsheng, L., Zhenping, W.: Material removal mechanism of green machining on powder metallurgy parts during orthogonal cutting. Adv. Mater. Sci. Eng. 2020, 1962602 (2020). https://doi.org/10.1155/2020/1962602CrossRef

15.

Czampa, M., Farkas, B., Szalay, T.: Machinability improvement of powder metallurgy steels. Tehnički vjesnik 23(3), 809–817 (2016). https://doi.org/10.17559/TV-20150429100430CrossRef

16.

Czampa, M., Markos, S., Szalay, T.: Improvement of drilling possibilities for machining powder metallurgy materials. Proc. CIRP 7, 288–293 (2013). https://doi.org/10.1016/j.procir.2013.05.049CrossRef

17.

Tanaka, M., Yoshimoto, A., Ohshita, H., Hashimoto, T.: Grinding Mechanism and Case Study on Double-Disc Grinding of Ferrous Sintered Material. Powder Metal. 877–878 (2006)

18.

Povstyanoi, O.Y., Sychuk, V.A., McMillan, A., Rud’, V.D., Zabolotnyi, O.V.: Metallographic analysis and microstructural image processing of sandblasting nozzles produced by powder metallurgy methods. Powder Metall. Met. Ceram. 54(3–4), 234–240 (2015). https://doi.org/10.1007/s11106-015-9705-8CrossRef

19.

Ivanov, V., Dehtiarov, I., Pavlenko, I., Kosov, M., Hatala, M.: Technological assurance and features of fork-type parts machining. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing II. Lecture Notes in Mechanical Engineering, pp. 114–125. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-22365-6_12CrossRef

20.

Armarego, E.J.A., Shi, G., Verezub, S.: Modelling the basic cutting action and machining performance of sintered metallic materials. Mach. Sci. Technol. 5(3), 353–373 (2001). https://doi.org/10.1081/MST-100108620CrossRef

21.

Zaichuk, N., Shymchuk, S., Tkachuk, A., Feshchuk, Y., Szczot, J.: Structure and properties of surface bandage shelves for the gas turbine engine’s blades. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds.) Advances in Design, Simulation and Manufacturing IV. Lecture Notes in Mechanical Engineering, pp. 602–612. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-77719-7_60CrossRef

22.

Zablotskyi, V., Tkachuk, A., Senyshyn, A., Trokhymchuk, I., Svirzhevskyi, K.: Impact of turning operations on the formation of rolling bearing’s functional surfaces. In: Tonkonogyi, V., Ivanov, V., Trojanowska, J., Oborskyi, G., Pavlenko, I. (eds.) Advanced Manufacturing Processes III. Lecture Notes in Mechanical Engineering, pp. 229–238. Springer, Cham (2022). https://doi.org/10.1007/978-3-030-91327-4_23CrossRef

23.

Privezentsev, D., Zhiznyakov, A., Kulkov, Y.: Analysis of the microhardness of metals using digital metallographic images. Mater. Today Proc. 11(1), 325–329 (2019). https://doi.org/10.1016/j.matpr.2018.12.152CrossRef

Titel: Investigation of the Surface Layer Hardness When Grinding Sintered Porous Workpieces
verfasst von: Oleg Zabolotnyi
Tetiana Bozhko
Tetiana Halchuk
Olha Zaleta
Dagmar Cagáňová
Verlag: Springer International Publishing
Buch: Advances in Design, Simulation and Manufacturing V
Print ISBN: 978-3-031-06024-3

Electronic ISBN: 978-3-031-06025-0

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-3-031-06025-0_35

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten