nach oben

International Journal on Interactive Design and Manufacturing (IJIDeM)

Erschienen in:

04.12.2017 | Original Paper

Investigation on the temperature field under the action of the blunt tool edge for precision cutting of titanium alloys

verfasst von: Shucai Yang, Xin Tong, Xianli Liu, Yuhua Zhang, Chunsheng He

Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

According to the research of the generation and propagation of the cutting heat, and the two-dimensional cutting temperature model, the relationship between the blunt tool edge radius and cutting temperature was considered, then the average temperature cutting models of the shear plane, the rake face and the flank face were constructed with the consideration of the blunt tool edge during the cutting process of the titanium alloys. In addition, the temperature distribution near the blunt tool edge was studied during the cutting process of titanium alloys. The cutting temperature field models and the accuracy of the simulation analysis were in the same trend through the precision cutting experiment of titanium alloys. Most importantly, it can provide a reliable and theoretical basis for reasonable design of the blunt tool edge and the precise cutting of the titanium alloys accordingly.

Vorheriger Artikel Using FEM simulation to predict structural performances of a sailing dinghy

Nächster Artikel A Welding Capability Assessment Method (WCAM) to support multidisciplinary design of aircraft structures

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Sulaiman, S., Roshan, A., Borazjani, S.: Effect of cutting parameters on cutting temperature of Ti–6Al–4V alloy. Appl. Mech. Mater. 392, 68–72 (2013)CrossRef

Wang, Z., Nakashima, S., Larson, M.: Energy efficient machining of titanium alloys by controlling cutting temperature and vibration. Procedia CIRP 17, 523–528 (2014)CrossRef

Yang, Y., Zhu, W.: Study on cutting temperature during milling of titanium alloy based on FEM and experiment. Int. J. Adv. Manuf. Technol. 73(9–12), 1511–1521 (2014)CrossRef

Sun, Y., Sun, J., Li, J., et al.: An experimental investigation of the influence of cutting parameters on cutting temperature in milling Ti–6Al–4V by applying semi-artificial thermocouple. Int. J. Adv. Manuf. Technol. 70(5–8), 765–773 (2014)CrossRef

Liu, X., Yuan, Z., Chen, Bo: The measurement of cutting temperature by equivalent thermocouple methods. J. Metrol. 20(3), 187–192 (1999)

Bhaumik, S.K., Divakar, C., Singh, A.K.: Machining Ti–6Al–4V alloy with a WBN–CBN composite tool. Mater. Des. 16(4), 221–226 (1995)CrossRef

Zhang, S., Liu, Z.: A new approach to cutting temperature prediction considering the diffusion layer in coated tools. Int. J. Mach. Tools Manuf. 49(7–8), 619–624 (2009)CrossRef

Komanduri, R., Hou, Z.B.: Thermal modeling of the metal cutting process: part I temperature rise distribution due to shear plane heat source. Int. J. Mech. Sci. 42(9), 1715–1752 (2000)CrossRefMATH

Komanduri, R., Hou, Z.B.: Thermal modeling of the metal cutting process: part III temperature rise distribution due to the combined effects of shear plane heat source and the tool interface frictional heat source. Int. J. Mech. Sci. 43(1), 89–107 (2001)CrossRefMATH

10.

Komanduri, R., Hou, Z.B.: Thermal modeling of the metal cutting process: part-II temperature rise distribution due to frictional heat source at the tool-chip interface. Int. J. Mech. Sci. 43(1), 57–88 (2001)CrossRefMATH

11.

Quan, Y.M., He, Z.W.: Cutting heat distribution in turning of carbon steel. China Mech. Eng. 17(20), 2155–2158 (2006)

12.

Quan, Y.M., He, Z.W., Dou, Y.: Cutting heat dissipation in high speed machining of carbon steel based on calorimetry method. J. South China Univ. Technol. 34(11), 1–4 (2006)

13.

Chang, C.-S.: Prediction of the cutting temperatures of stainless steel with chamfered main cutting edge tools. J. Mater. Process. Technol. 190(1–3), 332–341 (2007)CrossRef

14.

Cotterell, M., Byrne, G.: Characterization of chip formation during orthogonal cutting of titanium alloy Ti–6Al–4V. CIRP J. Manuf. Sci. Technol. 1(1), 81–85 (2008)CrossRef

15.

Han, M., Li, Y., Zhao, W.: Experimental study on cutting temperature in high speed cutting of Ti–6Al–4V. Tool Technol. 42(6), 10–13 (2008)

16.

Sayadi, M.K., Ramezanian, R., Ghaffarinasab, N.: International journal of industrial engineering computations. AIAA J. 1, 54–56 (2010)

17.

Kumar, R., Sahoo, A.K., Satyanarayana, K., et al.: Some studies on cutting force and temperature in machining Ti–6Al–4V alloy using regression analysis and ANOVA. Int. J. Ind. Eng. Comput. 4(3), 427–436 (2013)

18.

Zhixiang, H., Yahui, H., Chengjun, Y.: Finite element analysis on cutting temperature of titanium alloy turning based on Deform-3D. China Agric. Chem. J. 35(4), 124–127 (2014)

19.

Jianfeng, Z., He, C., Lixuan, H.: Simulation analysis on cutting heat and temperature field in metal cutting process. Mech. Res. Appl. 4, 95–97 (2012)

Titel: Investigation on the temperature field under the action of the blunt tool edge for precision cutting of titanium alloys
verfasst von: Shucai Yang
Xin Tong
Xianli Liu
Yuhua Zhang
Chunsheng He
Publikationsdatum: 04.12.2017
Verlag: Springer Paris
Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Ausgabe 3/2018
Print ISSN: 1955-2513
Elektronische ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-017-0430-z

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 3/2018

Modal analysis of the multi-shaped coupled honeycomb structures used in satellites structural design

Effect of hybrid wire EDM conditions on generation of residual stresses in machining of HCHCr D2 tool steel under ultrasonic vibration

Fast and accurate mesh registration applied to in-line dimensional inspection processes

Experiences in implementing design heuristics for innovation in product design

Tool path planning without interference for convex surfaces based on the optimal cutter orientation of the annular cutter

A key components-based heuristic modular product design approach to reduce product assembly cost