nach oben

Strength of Materials

Erschienen in:

06.04.2017

Isothermal Crystallization Kinetics Effect on the Tensile Properties of PLA/PTT Polymer Composites

verfasst von: C.-Y. Tsou, C.-L. Wu, Y.-C. Tseng, S.-H. Chiu, M.-C. Suen, W. S. Hung, C.-H. Tsou

Erschienen in: Strength of Materials | Ausgabe 1/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A poly(lactic acid)/poly(trimethylene terephthalate) (PLA/PTT) composite was prepared by melt blending to improve the PTT crystallization rate. Morphology analysis of PLA/PTT fractured surfaces demonstrated the compatibility of its components. Thermogravimetric analysis revealed that the thermodegradation of a PLA/PTT sample was higher than that of PLA. Differential scanning calorimetry was used to evaluate the crystallization behavior. The Avrami equation described the isothermal crystallization kinetics. The Hoffman–Weeks parameters indicated that the PLA presence increased slightly the PTT nucleation. The tests of PLA, PTT, and PLA/PTT specimens in tension showed that a percent elongation of the PLA/PTT composite was between that of PLA and PTT; however, the tensile strength of the PLA/PTT composite was similar to that of PLA.

Vorheriger Artikel Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys

Nächster Artikel Numerical Simulation of Flexible Multilayered Pipe/Riser Under Torsion

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S.-L. Yang, Z.-H. Wu, W. Yang, et al., “Thermal and mechanical properties of chemical cross-linked polylactide (PLA),” Polym. Test., 27, No. 8, 957–963 (2008).CrossRef

X. He and D. Yang, “Banded spherulites grown from poly(trimethylene terephthalate) solution-cast film,” J. Wuhan Univ. Technol., 23, No. 6, 791–794 (2008).CrossRef

H. Chuah, “Orientation and structure development in poly(trimethylene terephthalate) tensile drawing,” Macromolecules, 34, No. 20, 6985–6993 (2001).CrossRef

S. Grebowicz, H. Brown, H. Chuah, et al., “Deformation of undrawn poly(trimethylene terephthalate) (PTT) fibers,” Polymer, 42, No. 16, 7153–7160 (2001).CrossRef

J. Zhang, “Study of poly(trimethylene terephthalate) as an engineering thermoplastics material,” J. Appl. Polym. Sci., 91, No. 3, 1657–1666 (2004).CrossRef

C.-H. Tsou, W.-S. Hung, C.-S. Wu, et al., “New composition of maleic-anhydride-grafted poly(lactic acid)/rice husk with methylenediphenyldiisocyanate,” Mater. Sci.-Medzg., 20, No. 4, 446–451 (2015).

H. B. Ravikumar, C. Ranganathaiah, G. N. Kumaraswamy, and S. Thomas, “Positron annihilation and differential scanning calorimetric study of poly(trimethylene terephthalate)/EPDM blends,” Polymer, 46, No. 7, 2372–2380 (2005).CrossRef

C.-H. Tsou, H.-T. Lee, M. De Guzman, et al., “Synthesis of biodegradable polycaprolactone/polyurethane by curing with H₂O,” Polym. Bull., 72, No. 7, 1545– 1561 (2015).CrossRef

A. J. Oshinski, H. Keskkula, and D. R. Paul, “Rubber toughening of polyamides with functionalized block copolymers: 1. Nylon-6,” Polymer, 33, No. 2, 268–283 (1992).CrossRef

10.

C.-H. Tsou, H.-T. Lee, W.-S. Hung, et al., “Synthesis and properties of antibacterial polyurethane with novel Bis(3-pyridinemethanol) silver chain extender,” Polymer, 85, 96–105 (2016).CrossRef

11.

C.-H. Tsou, H.-T. Lee, H.-A. Tsai, et al., “Synthesis and properties of biodegradable polycaprolactone/polyurethanes by using 2,6-pyridinedimethanol as a chain extender,” J. Polym. Degrad. Stabil., 98, No. 2, 643–650 (2013).CrossRef

12.

C.-Y. Tsou, C.-L. Wu, C.-H. Tsou, et al., “Biodegradable composition of poly(lactic acid) from renewable wood flour,” Polym. Sci. Ser. B+, 57, No. 5, 473–480 (2015).CrossRef

13.

P. A. Tzika, M. C. Boyce, and D. M. Parks, “Micromechanics of deformation in particle-toughened polyamides,” J. Mech. Phys. Solids, 48, No. 9, 1893–1929 (2000).CrossRef

14.

C.-H.Tsou, H.-T. Lee, W.-S. Hung, et al., “Effects of different metals on the synthesis and properties of waterborne polyurethane composites containing pyridyl units,” Polym. Bull., DOI 10.1007/s00289-016-1767-3 (2016).

15.

M.-C. Yang, B.-J. Kao, M.-C. Suen, et al., “The properties and a new preparation of ethylene propylene dienemonomer/montmorillonite nanocomposites,” Polym. Polym. Compos., 23, No. 3, 181–190 (2015).

16.

C. Zhou, M. Chen, Z. Y. Tan, et al., “The influence of arrangement of St in MBS on the properties of PVC/MBS blends,” Eur. Polym. J., 42, No. 8, 1811–1818 (2006).CrossRef

17.

C.-H. Tsou, M.-C. Suen, W.-Y. Wu, et al., “Crystallization behavior and tensile property of poly (trimethyleneterephthalate)/styrene-ethylene-buthylene-styrene composites,” J. Wuhan Univ. Technol., 31, No. 2, 474–480 (2016).CrossRef

18.

C.-H. Tsou, M.-C. Suen, W.-H. Yao, et al., “Preparation and characterization of bioplastic-based green renewable composites from tapioca with acetyl tributyl citrate as plasticizer,” Materials, 7, No. 8, 5617–5632 (2014).CrossRef

19.

K. Wang, Y. Chen, and Y. Zhang, “Effects of organoclay platelets on morphology and mechanical properties in PTT/EPDM-g-MA/organoclay ternary nanocomposites,” Polymer, 49, No. 15, 3301–3309 (2008).CrossRef

20.

D. Juárez, S. Ferrand, O. Fenollar, et al., “Improvement of thermal inertia of styrene-ethylene/butylenestyrene (SEBS) polymers by addition of microencapsulated phase change materials (PCMs),” Eur. Polym. J., 47, No. 2, 153–161 (2011).CrossRef

21.

C.-H. Tsou, B.-J. Kao, M.-C. Yang, et al. “Biocompatibility and characterization of polylactic acid/styrene-ethylene-butylene-styrene composites,” Biomed. Mater. Eng., 26, Suppl. 1, S147–S154 (2015).

22.

N. R. Savadekar and S. T. Mhaske, “The effect of vulcanized thermoplastics and SEBS on the impact strength of PPT,” Polym.-Plast. Technol., 49, No. 15, 1499–1505 (2010).CrossRef

23.

H. Zou, L. Wang, C. Yi, and H. Gan, “Thermal properties and non-isothermal crystallization behavior of poly(trimethylene terephthalate)/poly(lactic acid) blends,” Polym. Int., 60, No. 9, 1349–1354 (2011).

24.

M. Pyda, A. Boller, J. Grebowicz, et al., “Heat capacity of poly(trimethylene terephthalate),” J. Polym. Sci. Polym. Phys., 36, No. 14, 2499–2511 (1998).CrossRef

25.

M. Avrami, “Kinetics of phase change. I: General theory,” J. Chem. Phys., 7, No. 12, 1103–1112 (2004).CrossRef

26.

P. Srimoaon, N. Dangseeyun, and P. Supaphol, “Multiple melting behavior in isothermally crystallized poly(trimethylene terephthalate),” Eur. Polym. J., 40, No. 3, 599–608 (2004).CrossRef

27.

S. I. Han, S. W. Kang, B. S. Kim, et al., “A novel polymeric ionomer as a potential biomaterial: Crystallization behavior, degradation, and in-vitro cellular interactions,” Adv. Funct. Mater., 15, 367–374 (2005).CrossRef

28.

C.-H. Tsou, B.-J. Kao, M.-C. Suen, et al., “Crystallization behavior and biocompatibility of poly(butylene succinate)/poly(lactic acid) composites,” Mater. Res. Innov., 18, No. S2, S2-372–S2-376 (2014).

29.

N. Dangseeyun, P. Supaphol, and M. Nithitanakul, “Thermal, crystallization, and rheological characteristics of poly(trimethylene terephthalate)/poly(butylene terephthalate) blends,” Polym. Test., 23, No. 2, 187–194 (2004).CrossRef

Titel: Isothermal Crystallization Kinetics Effect on the Tensile Properties of PLA/PTT Polymer Composites
verfasst von: C.-Y. Tsou
C.-L. Wu
Y.-C. Tseng
S.-H. Chiu
M.-C. Suen
W. S. Hung
C.-H. Tsou
Publikationsdatum: 06.04.2017
Verlag: Springer US
Erschienen in: Strength of Materials / Ausgabe 1/2017
Print ISSN: 0039-2316
Elektronische ISSN: 1573-9325
DOI: https://doi.org/10.1007/s11223-017-9855-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2017

Strength of Reactive Powder Concrete Beam-Column Joints Reinforced with High-Strength (HRB600) Bars Under Seismic Loading

Experimental and Numerical Analysis of the Edge Effect for Corrugated and Honeycomb Fiberboard

Modeling of Nonlinear Isolation System Based on the Bouc–Wen Differential Model

Analysis and Experimental Study of Vibration System Characteristics of Ultrasonic Compound Electrical Machining

Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch

Influence of Tantalum Addition on Microstructure and Mechanical Properties of the Nial-Based Eutectic Alloy

Premium Partner

Marktübersichten