Ausgabe 3/2017
Inhalt (23 Artikel)
Inhibitors for prolonging corrosion protection of Mg-rich primer on Al alloy 2024-T3
Junren Lin, Dante Battocchi, Gordon P. Bierwagen
Synthesis and properties of multiarm star hydroxyl-terminated polyesters for two-component polyurethane coatings
Shan Huang, Juan Xiao, Yan’an Zhu, Jinqing Qu
Synthesis and characterization of bio-based benzoxazine oligomer from cardanol for corrosion resistance application
Deepak M. Patil, Ganesh A. Phalak, S. T. Mhaske
Thermally modified Scots pine and Norway spruce wood as substrate for coating systems
Michael Altgen, Holger Militz
Enhancing the coating properties of acrylic/casein latexes with high protein content
Matías L. Picchio, Roque J. Minari, Luis M. Gugliotta
Transparent UV-cured clay/UV-based nanocomposite coatings on wood substrates: surface roughness and effect of relative humidity on optical properties
William Nguegang Nkeuwa, Bernard Riedl, Véronic Landry
A novel 1,8-naphthalimide green fluorescent dye and its corresponding intrinsically fluorescent polyurethane latexes
Qingjun Jin, Yang Hu, Jie Shen, Botian Li, Chengyou Kan
Investigation of cardanol-based reactive polyamide as a crosslinker in epoxy zinc-rich primer
Dinesh Balgude, Anagha Sabnis, Swapan K. Ghosh
Boehmite/methacrylic nano-composites as protective coatings for natural stones: comparison between sunlight and UV photopolymerization cure reaction
Carola Esposito Corcione, Mariaenrica Frigione
Optimal prediction of PKS: RSO modified alkyd resin polycondensation process using discrete-delayed observations, ANN and RSM-GA techniques
Chigozie F. Uzoh, Okechukwu D. Onukwuli
Preparation of urushiol-containing poly(methyl methacrylate) copolymers for antibacterial and antifouling coatings
Nasreena Lone, In Woo Cheong, Min Cho, Yong-Ki Hong, Yoo Seong Choi, Suguna Perumal, Byung-Taek Oh, Jin Joo
Refinement of solid layers via wetting on homogeneous lyophilic surfaces
Jun Fukai, Kei Sakanoue, Yuuki Irihama, Kento Ando, Rintaro Yamashita, Shouma Nakagawa
Inkjet printing and surface treatment of an optimized polyurethane-based ink formulation as a suitable insulator over silver for contact with aqueous-based fluids in low-voltage applications
P. Aminayi, B. R. Young, T. L. Young, L. H. Sprowl, M. K. Joyce
In vitro bactericidal effect of ultrasonically sol–gel-coated novel CuO/TiO2/PEG/cotton nanocomposite for wound care
Arman Khani, Nasrin Talebian
Preparation and properties of UV-cured epoxy acrylate/glycidyl-POSS coatings
Ying Wang, Fengguo Liu, Xiangxin Xue
Effect of the degree of muscle oxidation on sticking and degradation of polyethylene terephthalate (PET) layers in electrolytic chromium coated steels
E. Zumelzu, M. J. Wehrhahn, F. Rull, H. Pesenti, O. Muñoz, R. Ugarte
Effects of fluorine and silicon components on the hydrophobicity failure behavior of acrylic polyurethane coatings
Fei Yang, Liqun Zhu, Dongxiao Han, Weiping Li, Yichi Chen, Xianming Wang, Liang Ning
Low-temperature fabrication of TiO2 film on flexible substrate by atmospheric roll-to-roll CVD
Srikanth Jagadeesan, Yang Hoi Doh, Kyung-Hyun Choi
Study on an elaborated method to improve corrosion resistance of zinc phosphate coating
L. Fathyunes, M. Azadbeh, M. Tanhaei, S. O. R. Sheykholeslami
Microwave-assisted preparation of photoactive TiO2 on textile substrates
Boris Mahltig, Haoqian Miao
Coating of green-synthesized silver nanoparticles on cotton fabric
Madheswaran Balamurugan, Shanmugam Saravanan, Tetsuo Soga
Epoxy-based paints from glycolysis products of postconsumer PET bottles: synthesis, wet paint properties and film properties
- Brief Communication
Kevser Bal, Kerim Can Ünlü, Işıl Acar, Gamze Güçlü
