Ausgabe 7/2025
Inhalt (30 Artikel)
A comprehensive review on erosion–corrosion characteristics of steel subjected to tensile stress
- Review
Hua-kun Wang, Ling Deng, Yao Zhang, Yang Yu, Jing Gao
Microwave pre-oxidation followed by biomass reduction for efficient separation of titanium and iron from vanadium–titanium magnetite
- Original Paper
Bing Hu, Yong-zhao Liang, Fu-qiang Zheng, Chen Liu, Xun-an Ning
Adhesive behaviour of ultrafine particulate matters from iron ore sintering flue gas on grate bar and control technique
- Original Paper
Xiao-long Wang, Zhi-yun Ji, Min Gan, Xiao-hui Fan, Wang Zhu, Zeng-qing Sun, Lin-cheng Liu, Yu-feng Wu, Dan Yu
Energy, exergy, economic performance evaluation and parametric optimization of organic Rankine cycle for low-temperature flue gas waste heat recovery
- Original Paper
Jun-sheng Feng, Hao Wu, Xin-ni Cheng, Liang Zhao, Hui Dong
Influence of diversion cone structure on inner characteristic in hydrogen-enriched shaft furnace: a DEM study
- Original Paper
Xu Tian, Heng Zhou, Tian Xia, Zhi-tao Qin, Hui-dong Guo, Da-wei Sun, Ming-yin Kou, Sheng-li Wu
Boosting algorithms for predicting end-point temperature in BOF steelmaking using big industrial datasets
- Open Access
- Original Paper
Jian-bo Zhang, Maryam Khaksar Ghalati, Jun Fu, Xiao-an Yang, G.M.A.M. El-Fallah, Hong-biao Dong
Flow and fluctuation of molten steel under permanent magnet flow control-mold in continuous casting process
- Original Paper
Ze-feng Han, En-gang Wang, Ze-peng Wang, Zhong-xin Zhai
Fluctuation of steel–slag interface in flexible thin slab casting mold
- Original Paper
Jing-pei Shi, Xiao-xian Shang, Yan Wang, Cai-jun Zhang, Li-guang Zhu
Experimental investigation on characteristics of hook in continuously cast slab of low carbon steel
- Original Paper
Xiao-hua Wang, Wen-jie Tong, Sen Luo, Ye-lian Zhou, Wei-ling Wang, Miao-yong Zhu
Effect of secondary-cooling-segment electromagnetic stirring on solidification characterization near white band of high-strength steel slab
- Original Paper
Cheng Yao, Min Wang, You-jin Ni, Hai-bo Zhang, Li-dong Xing, Yan-ping Bao
An optimization framework for hot-rolled strip crown control based on model-driven digital twin
- Original Paper
Fen-jia Wang, Chao Liu, An-rui He, Yong Song, Jian Shao, Chi-huan Yao, Yi Qiang, Hong-yan Liu, Bo Ma
Microstructure of interfacial diffusion layer of cross-layered silver–copper composite strip and its effect on resistivity
- Original Paper
Jie Liu, Ya-fang Cheng, Pei-yan Li, Jiang-tao Hou, Fu-li Liu, Jian Qin, Qing-le Hao, Su-juan Zhong
Influence of calcination temperature on steel slag activity for preparing a gel material
- Original Paper
Ye Li, Xue Tang, Heng-ze Zhao, Yi-pei Qi
Dezincification of electric furnace dust by steel slag synergistic calcification carbothermal reduction
- Original Paper
Dong-jie Zhou, Jia-yong Qiu, Wei-tong Du, Chuan-bo Zheng, Rui Mao, Hai-wei Yao, En-wei Wu, Liu-yu Zhang, Dian-chun Ju
Process optimization and application of multi-source industrial solid waste synergistic utilization to prepare functional ceramsite
- Original Paper
Yi-fan Chai, Dong-dong Li, Wen-xian Hu, Jun Peng, Sheng-li An
Separation and enrichment of valuable elements from slag containing rare earth, niobium and titanium via Fe–Si bath smelting reduction
- Original Paper
Xing-li Jia, Bo Zhang, Lei Cui, Cheng-jun Liu, Mao-fa Jiang
Effect of reaction time on interaction between steel with and without La and MgO–C refractory
- Original Paper
Ming-zhe Zhao, Ya-qiong Li, Ju-jin Wang, Li-feng Zhang
Fabrication and mechanical properties of in-situ Si3N4 bonded MgO–C refractories by nitrogen gas pressure sintering
- Original Paper
Xu Cheng, Chao Yu, Guang-chao Xing, Bei-yue Ma, Jun Ding, Zhou-fu Wang, Ji-xiang Zhang, Hong-xi Zhu, Cheng-ji Deng
Microstructure evolution and bonding mechanism of hot compression bonding joint of reduced activation ferritic/martensitic steel
- Original Paper
Rui-jiang Chang, Guo-wang Liu, Qian-ying Guo, Ran Ding, Chen-xi Liu, Yong-chang Liu
Microstructure–property correlation and strain partitioning behavior in medium-carbon carbide-free bainitic steel
- Original Paper
Ru Su, Xiong-wei Zheng, Jie Kang, Da-yong Wu, Hai-kun Ma, Fu-cheng Zhang, Zhi-nan Yang, Qing Li
Multiscale analysis of microstructure-based bending characteristics of advanced high strength dual-phase steel
- ORGINAL PAPER
Ming-shuai Huo, Hai-bo Xie, Tao Zhang, Guan-qiao Su, Lian-jie Li, Meng-yuan Ren, Zhou Li, Jing-bao Liu, Ting Yang, Xi Zhang, Yan-bin Du, Valerie Linton, Zheng-yi Jiang
Effects of prior austenite and primary carbides on mechanical properties of a novel 2.5 GPa grade ultra-high strength steel
- Original Paper
Yue Liu, Shun Han, Ru-ming Geng, Xue-dong Pang, Yu Liu, Si-min Lei, Yong Li, Chun-xu Wang
A novel low-cost selective laser-melted 718HH plastic mold steel with an excellent combination of strength and toughness
- Original Paper
Meng-xing Zhang, Bo-ning Zhang, Dang-shen Ma, Hong-xiao Chi, Jin-bo Gu, Yu Liu, Jian Zhou, Chang-jun Wang
Microstructure formation mechanism of vacuum-brazed 6061/304 joint using Al–Si–Ge/Cu composite filler
- Original Paper
Sen Huang, Wei-min Long, Ji-guo Shan, Guan-xing Zhang, Chao Jiang, Pei-yao Jing
Modeling and optimization of aluminum–steel refill friction stir spot welding based on backpropagation neural network
- Original Paper
Shi-yi Wang, Yun-qiang Zhao, Korzhyk Volodymyr, Hao-kun Yang, Li-kun Li, Bei-xian Zhang
High-temperature oxidation behavior and mechanism of 18Cr–Mo-type ferritic stainless steel containing W and Ce in simulated automotive exhaust gas
- Original Paper
Jia-hao Zheng, Yang Feng, Yang Zhao, Li-qing Chen
Effect of inclusion and microstructure transformation on corrosion resistance of 316L stainless steel after isothermal heat treatment
- Original Paper
Fu-kang Li, Cheng-song Liu, Yong Wang, Hua Zhang, Jie Li, Yuan-yuan Lu, Li Xiong, Hong-wei Ni
Effect of Si on evolution of microstructure and wear resistance of Al0.5CrFeNi2.5 high-entropy alloy fabricated via laser melting deposition
- Original Paper
Bing-qian Jin, Hui-shu Yu, Sai-nan Nie, Bo-wei Xing, Yan Chen, Jia-qing You, Nan-nan Zhang
Mechanical behavior of GH4720Li nickel-based alloy at intermediate temperature for different strain rates
- Original Paper
Xiao-can Wen, Xin-yu Meng, Shao-min Lyu, Xing-fei Xie, Zhi-qiang Luo, Jing-long Qu, Jin-hui Du
Effect of ωiso and α precipitation during aging on tensile properties and impact toughness of a metastable β type Ti alloy
- Original Paper
Yan-fei Xu, Lv-ming Chen, Chi Liu, Can Zhou, Sha Zhang, Jun-zhao Li, Zhi-ming Guo, Han-qing Xiong, Jian Liu, Long Liu, Jian Li, Zhuo Fu, Guang-sheng Zeng
