Skip to main content
main-content

Zeitschrift

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 11/2018

Ausgabe 11/2018

Inhaltsverzeichnis ( 65 Artikel )

24.10.2018 | Ausgabe 11/2018

The Effects of Low Frequency on the Microstructure and Mechanical Properties of High-Strength Al-Mg Aluminum Alloys by Wire and Double-Pulsed Arc Additive Manufacturing

Yuehai Feng, Lei He, Kehong Wang, Xuanyu E

23.10.2018 | Ausgabe 11/2018

Reducing Intermetallic Compounds of Mg/Al Joint in Friction Stir Lap Welding

Z. L. Liu, K. Yang, S. D. Ji

23.10.2018 | Ausgabe 11/2018

Laser Powder Deposition Parametric Optimization and Property Development for Ti-6Al-4V Alloy

Yang Liu, Chao Liu, Wensheng Liu, Yunzhu Ma, Cheng Zhang, Chaoping Liang, Qingshan Cai

19.10.2018 | Ausgabe 11/2018

Development of Stretch Flangeable Grade Steels by Inclusion Engineering Approach

G. K. Mandal, K. Ashok, S. K. Das, P. Biswas, R. B. Sarkar, R. Sundara Bharathy, V. C. Srivastava

17.10.2018 | Ausgabe 11/2018

Influence of Rotation Rate on Microstructure and Comprehensive Performance of FSWed Mg Alloy

Yajie Li, Fengming Qin, Cuirong Liu, Leijun Li, Zhisheng Wu

08.10.2018 | Ausgabe 11/2018

Microstructure and Mechanical Properties of Cast Al-5Zn-2Mg Alloy Subjected to Equal-Channel Angular Pressing

G. K. Manjunath, G. V. Preetham Kumar, K. Udaya Bhat, Prashant Huilgol

05.10.2018 | Ausgabe 11/2018

Thermal Analysis of Cerium-Treated Chill-Cast Al-23 Si Alloy

V. Vijeesh, K. Narayan Prabhu

04.10.2018 | Ausgabe 11/2018

Influence of Annealing on the Properties of Explosively Welded Titanium Grade 1—AW7075 Aluminum Alloy Bimetals

Miroslav Sahul, Martin Sahul, Ján Lokaj, L’ubomír Čaplovič, Petr Nesvadba

03.10.2018 | Ausgabe 11/2018

Mechanical and Tribological Behavior of Multiwalled Carbon Nanotubes-Reinforced AA7075 Composites Prepared by Powder Metallurgy and Hot Extrusion

M. Jagannatham, M. S. Senthil Saravanan, K. Sivaprasad, S. P. Kumaresh Babu

03.10.2018 | Ausgabe 11/2018

Grain Refinement, Microstructure and Mechanical Properties Homogeneity of Mg-Gd-Y-Nd-Zr Alloy During Multidirectional Forging

Xiangsheng Xia, Changpeng Wang, Yang Wu, Kui Zhang, Minglong Ma, Baoguo Yuan

01.10.2018 | Ausgabe 11/2018

High Wear-Resistant Aluminum Matrix Composite Layer Fabricated by MIG Welding with Lateral B4C Powder Injection

Jianxin Sun, Ping Shen, Daxin Zeng

01.10.2018 | Ausgabe 11/2018

Effect of Minor Er on the Microstructure and Properties of Al-6.0Mg-0.4Mn-0.1Cr-0.1Zr Alloys

Hailong Chen, Tianfu Yu, Zhongyuan Qi, Ruizhi Wu, Guojun Wang, Xinyu Lv, Fuguan Cong, Legan Hou, Jinghuai Zhang, Milin Zhang

26.09.2018 | Ausgabe 11/2018

Effect of Base Metal Misorientation on Single-Crystal Superalloy Transient Liquid-Phase Bonded Joints

Lu Chai, Jinbao Hou, Bo Lang

26.09.2018 | Ausgabe 11/2018 Open Access

Problem of Identification of Phase Transformation Models Used in Simulations of Steels Processing

Łukasz Rauch, Daniel Bachniak, Roman Kuziak, Jan Kusiak, Maciej Pietrzyk

19.10.2018 | Ausgabe 11/2018

Identification of Post-necking Tensile Stress–Strain Behavior of Steel Sheet: An Experimental Investigation Using Digital Image Correlation Technique

Surajit Kumar Paul, Satish Roy, S. Sivaprasad, H. N. Bar, S. Tarafder

15.10.2018 | Ausgabe 11/2018

Creep Properties of Directionally Solidified Nb-Modified Ni-Base Superalloy, Mar-M247

A. M. S. Costa, E. Hawk, J. Dansbury, C. A. Nunes, G. E. Fuchs

11.10.2018 | Ausgabe 11/2018

The Compactibility of Unsaturated Titanium Hydride Powders

Yuhang Wei, Chunming Wang, Yeguang Zhang, Libo Mei, Sufen Xiao, Yungui Chen

08.10.2018 | Ausgabe 11/2018

Strengthening of C/SiC Composites by Electrophoretic Deposition of CNTs on a SiC Coating

Kun Yang, Hui Mei, Daoyang Han, Laifei Cheng

04.10.2018 | Ausgabe 11/2018

Achieving Excellent Strength–Ductility and Impact Toughness Combination by Cyclic Quenching in Medium Mn TRIP-Aided Steel

Lei Zhang, Xingmin Huang, Yanhua Wang, Yuanbo Guo, Guangze Dai, Dongsheng Li

04.10.2018 | Ausgabe 11/2018

Effect of Surface Treatment on Bio-corrosion in Aluminum Alloy 2024-T3

K. Nishchitha, M. K. Deepa, B. G. Prakashaiah, J. N. Balaraju, B. E. Amitha rani

04.10.2018 | Ausgabe 11/2018

An Exceptional Synergy of High Strength, Ductility and Toughness in a Gradient-Structured Low-Carbon Steel

Yindong Shi, Lina Wang, Yulong Zhang, Hailong Xie, Yajun Zhao

01.10.2018 | Ausgabe 11/2018

Pitting Corrosion of 10Ni8CrMoV High-Strength Steel Induced by a Potential Perturbation

Lin Fan, Kangkang Ding, Penghui Zhang, Weimin Guo, Kun Pang, Likun Xu

27.09.2018 | Ausgabe 11/2018

Effects of Rotation Speed on Microstructure and Mechanical Properties of 2060 Al-Cu-Li Alloy in Friction Stir Welding

Keng Yan, Tianyu Wang, Haimei Liang, Yong Zhao

24.09.2018 | Ausgabe 11/2018

Sliding Wear of Spark Plasma Sintered CrFeCoNiCu High-Entropy Alloy Coatings: Effect of Aluminum Addition

Xiulin Ji, S. Habib Alavi, Sandip P. Harimkar, Yingtao Zhang

24.10.2018 | Ausgabe 11/2018

Parametric Modeling of AZ31-Mg Alloy Friction Stir Weld Temperature Histories

S. G. Lambrakos

15.10.2018 | Ausgabe 11/2018

Design and Performance Evaluation of Al2O3-SiC Composite for Direct-Bonded Copper Substrate

S. S. Akhtar, K. T. Lemboye, A. F. M. Arif, K. S. Al-Athel

09.10.2018 | Ausgabe 11/2018

An Artificial Neural Network Model to Predict the Bainite Plate Thickness of Nanostructured Bainitic Steels Using an Efficient Network-Learning Algorithm

Minal Shah, Suchandan K. Das

03.10.2018 | Ausgabe 11/2018

Experimental Validation of Numerical Simulations of a New-Generation NiTi Endodontic File Under Bending

Valérie Chevalier, Laurent Pino, Reza Arbab Chirani, Sylvain Calloch, Shabnam Arbab Chirani

26.10.2018 | Ausgabe 11/2018 Open Access

The Selection of Heat Treatment Parameters to Obtain Austempered Ductile Iron with the Required Impact Strength

Dorota Wilk-Kołodziejczyk, Krzysztof Regulski, Tomasz Giętka, Grzegorz Gumienny, Krzysztof Jaśkowiec, Stanisława Kluska-Nawarecka

23.10.2018 | Ausgabe 11/2018

Study on Microstructure and Properties of AZ31/6061 GTAW Butt Joints According to Mg-Cd-Al Ternary System

Liming Liu, Xinze Lv, Hongyang Wang

23.10.2018 | Ausgabe 11/2018

Corrosion-Resistant Hydrophobic Nanostructured Ni-Reduced Graphene Oxide Composite Coating with Improved Mechanical Properties

S. Kumari, A. Panigrahi, S. K. Singh, S. K. Pradhan

16.10.2018 | Ausgabe 11/2018

Effect of Tempering and Rolling on Fatigue Crack Growth Behavior of Modified 9Cr-1Mo Steel

S. S. Samant, I. V. Singh, R. N. Singh

11.10.2018 | Ausgabe 11/2018

Effect of Orientation of Weld Line on Formability of Electron Beam-Welded Dissimilar Thickness Titanium Sheets

P. S. Lin Prakash, Sunil Kumar Biswal, Gour Gopal Roy, Maha Nand Jha, Martin Mascarenhas, Sushanta Kumar Panda

11.10.2018 | Ausgabe 11/2018

Microstructural Characterization and Electrochemical Behavior of AA2014 Al-Cu-Mg-Si Alloy of Various Tempers

K. S. Ghosh, Kapil Tripati

11.10.2018 | Ausgabe 11/2018

Micro-crack Pinning and Interfacial Fracture in Mixed Metal Oxide Reinforced Epoxy Nanocomposite

Ramakrishna Vasireddi, D. Roy Mahapatra

10.10.2018 | Ausgabe 11/2018

Antifouling Properties and Release of Dissolved Copper of Cold Spray Cu/Cu2O Coatings for Ships and Steel Structures in Marine Environment

Rui Ding, Xiangbo Li, Jia Wang, Weihua Li, Xiao Wang, Taijiang Gui

10.10.2018 | Ausgabe 11/2018

Hygrothermal Effect on Composites Under In-Plane Fatigue at Stress Ratios of R = −1 and R = 0.1: An Analysis of Quasi-Isotropic Stitched Carbon Fibers

Marcos Yutaka Shiino, Guilherme Silva Moraes de Siqueira, Maria Odila Hilário Cioffi, Sérgio Roberto Montoro, Maurício Vicente Donadon

09.10.2018 | Ausgabe 11/2018

Analyzing the Effect of CeB6 on Microstructure and Mechanical Properties of High-Speed Steel Consolidated by Powder Metallurgy

Qi Ouyang, Peng Luo, Fengli Zhang, Qinqiu He, Ying Wang, Songlin Li

09.10.2018 | Ausgabe 11/2018

Hybrid CFRP/SWCNT Composites with Enhanced Electrical Conductivity and Mechanical Properties

Mikhail Burkov, Alexander Eremin

08.10.2018 | Ausgabe 11/2018

Effects of Mg Content on the Fatigue Strength and Fracture Behavior of Al-Si-Mg Casting Alloys

Ming-Ze Wu, Ji-Wang Zhang, Yan-Bin Zhang, Hua-Qiang Wang

08.10.2018 | Ausgabe 11/2018

Study on Texture Evolution and Shear Behavior of an Al/Ni/Cu Composite

Ali Shabani, Mohammad Reza Toroghinejad

09.10.2018 | Ausgabe 11/2018

Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium

Amlan Kar, Satish V. Kailas, Satyam Suwas

04.10.2018 | Ausgabe 11/2018

Formation of Lamellar Carbides in Alloy 617-HAZ and Their Role in the Impact Toughness of Alloy 617/9%Cr Dissimilar Welded Joint

Kai Ding, Peng Wang, Xia Liu, Xiaohong Li, Bingge Zhao, Yulai Gao

04.10.2018 | Ausgabe 11/2018

Mechanical and Tribological Behavior of ZrB2-TiB2 System Prepared by Mechanical Activation Spark Plasma Sintering Technique

S. Mondal, S. Chakraborty, S. Das

04.10.2018 | Ausgabe 11/2018

The Determination of Residual Stress in Quenched and Cold-Compressed 7050 Aluminum Alloy T-Section Forgings by the Contour Method and Neutron Diffraction

Xiaolong Liu, Robert C. Wimpory, Hai Gong, Yuntao Liu, Dongfeng Chen, Yaoqiong Liu, Yunxin Wu, Chen Li

04.10.2018 | Ausgabe 11/2018

Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels

Rasoul Pouriamanesh, Kamran Dehghani, Rudolf Vallant, Norbert Enzinger

03.10.2018 | Ausgabe 11/2018

Microstructure and Performance of Nano-WC Particle-Strengthened Ni Coatings by Electro-brush Plating

Xiaoben Qi, Ying Wang, Cong Wang, Rulin Zhang

01.10.2018 | Ausgabe 11/2018

Corrosion Performance of Composite MAO/TiO2 Sol–Gel Coatings on Magnesium Alloy AZ91D

Zhang Na, Yu Shengxue, Xing Qian, Chen Xiaolei, Zhang Mingxian, Shen Dejiu

01.10.2018 | Ausgabe 11/2018 Open Access

Nonlocal Analysis of Natural Vibrations of Carbon Nanotubes

Małgorzata Chwał

01.10.2018 | Ausgabe 11/2018

Fracture Analysis of ARB-Processed CP-Ti Sheets Under Unidirectional Tensile Loading

M. Karimi, M. R. Toroghinejad, J. Dutkiewicz

01.10.2018 | Ausgabe 11/2018

Dry-Sliding Tribological Properties of TiAl Alloys and Ti2AlN/TiAl Composites at High Temperature

Ningbo Zhang, Dongli Sun, Xiuli Han, Daqun Wang, Qing Wang, Hao Liu, Zhenhe Yu

28.09.2018 | Ausgabe 11/2018

A Hybrid Plasma Treatment of H13 Tool Steel by Combining Plasma Nitriding and Post-Oxidation

J. C. Díaz-Guillén, M. Alvarez-Vera, J. A. Díaz-Guillén, J. L. Acevedo-Davila, M. Naeem, H. M. Hdz-García, E. E. Granda-Gutiérrez, R. Muñoz-Arroyo

27.09.2018 | Ausgabe 11/2018

Influence of Dynamic Three Point Bending on the Work Hardening Capacity of T105Mn120 Manganese Steel

V. Bulbuc, B. Pricop, F. Maxim, M. Popa, N. Cimpoeşu, L. G. Bujoreanu

27.09.2018 | Ausgabe 11/2018

Enhanced Strength of 304 SS-Ti6Al4V Laser-Welded Joints Containing Composite Interlayers

Seyed Reza Elmi Hosseini, Kai Feng, Pulin Nie, Ke Zhang, Jian Huang, Zhuguo Li, Hiroyuki Kokawa, Baochao Guo, Song Xue

27.09.2018 | Ausgabe 11/2018

Semiempirical Formulae for Mechanical Properties Controlled by Strength and Ductility of Power-Law Hardening Metallic Materials

Yandong Hu, Zhi-Zhong Hu, Shu-Zhen Cao

27.09.2018 | Ausgabe 11/2018

Mechanical Properties and Strain-Induced Martensite Transformation in Cold Rolling of 304L Stainless Steel Plate

F. Abedi, S. Serajzadeh

26.09.2018 | Ausgabe 11/2018 Open Access

The Influence of Pr and Nd Substitution on Hydrogen Storage Properties of Mechanically Alloyed (La,Mg)2Ni7-Type Alloys

M. Balcerzak, M. Nowak, M. Jurczyk

26.09.2018 | Ausgabe 11/2018

Surface and Electrochemical Characteristics of Novel Chromate-Free Mn-V Oxyanion Sealed Tartaric–Sulfuric Acid Anodized Coating

G. Yoganandan, J. N. Balaraju, N. T. Manikandanath, V. Ezhilselvi, Meenu Srivastava, K. V. Nagacharan, A. R. Anilchandra, C. M. Manjunatha

25.09.2018 | Ausgabe 11/2018

Microstructure and Deformation Mechanism of AZ31 Magnesium Alloy Under Dynamic Strain Rate

Chao Lou, Qi Sun, Qingshan Yang, Yi Ren, Zhengyuan Gao, Xiyan Zhang

25.09.2018 | Ausgabe 11/2018

Comparison of Different Processing Routes for the Synthesis of Semiconducting AlSb

Anirudha Karati, M. Vaidya, B. S. Murty

25.09.2018 | Ausgabe 11/2018

Effect of Initial Microstructure on Properties of Cryorolled Al 5052 Alloy Subjected to Different Annealing Treatment Temperatures

N. M. Anas, B. K. Dhindaw, H. Zuhailawati, T. K. Abdullah, A. S. Anasyida

25.09.2018 | Ausgabe 11/2018

Effect of Boron Content on Microstructure, Mechanical Properties, and Oxidation Resistance of Mo-Si-B Composites

Jianhui Yan, Jinxin Huang, Kailing Li, Peng Zhou, Yi Wang, Jingwen Qiu

24.09.2018 | Ausgabe 11/2018

Electrochemical Corrosion Behavior of Plasma-Sprayed FeCrNiMoCBSi Amorphous/Nanocrystalline Coatings in Simulated Seawater Medium

Baosen Zhang, Qiangsheng Dong, Zhixin Ba, Shuaishuai Zhu, Yujun Han, Zhangzhong Wang

23.10.2018 | Ausgabe 11/2018

Mechanical Properties of the Mg-Gd-Y-Zn-Zr Alloys with Different Morphologies of Long-Period Stacking Ordered Phases

Xiaojie Zhou, Chuming Liu, Yonghao Gao, Shunong Jiang, Zhiyong Chen

03.10.2018 | Ausgabe 11/2018

Study on Corrosion Behavior of 7075 Aluminum Alloy with Retrogression and Reaging Using Taguchi Method

Rongde Li, Tong Liu, Ruiming Su, Jianhao Su, Yingdong Qu

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise