Journal of Materials Engineering and Performance

A Review on Additive Manufacturing Processes of Inconel 625

M. Karmuhilan, Somasundaram Kumanan

Investigation on the Thermal Fatigue and Microstructure Evolution Mechanism of Compacted Graphite Iron under Elevated Temperature

Guo Qing Shi, Zhong Yang, Min Guo, Dong Tao, S. Sun, J. P. Li, F. H. Yan

Effect of ECAP and Subsequent Annealing on Microstructure, Texture, and Microhardness of an AA6060 Aluminum Alloy

Tarek Khelfa, Rabeb Lachhab, Hiba Azzeddine, Zhiguo Chen, Jairo Alberto Muñoz, José María Cabrera-Marrero, François Brisset, Anne-Laure Helbert, Thierry Baudin, Mohamed Khitouni

Microstructure Twinning and Mechanical Properties of Laser Melted Cu-10Sn Alloy for High Strength and Plasticity

Peng Yang, Xingye Guo, Dingyong He, Wei Shao, Zhen Tan, Hanguang Fu, Zhenlu Zhou, Xiaoya Zhang

Effects of Plastic Deformation and Aging Treatment on Phase Precipitation in Ti2AlNb Alloy

• Technical Article

Yanqi Fu, Zhenshan Cui

Microstructure Evolution and Thermal Stability of Mg-Sm-Ca Alloy Processed by High-Pressure Torsion

Xiaohuan Liu, Rui Xu

Effect of Welding Thermal Cycle on Microstructural Characteristics and Toughness in Simulated Heat Affected Zone of Low-C Medium-Mn High Strength Steel

• Technical Article

Y. Dong, X. Y. Qi, Lin-xiu Du, L. Yan, R. D. K. Misra

On the Effects of H2 and Ar on Dual Layer Formed by Plasma Nitrocarburizing on Austenitic Stainless Steels

Jeet Sah, Alphonsa Joseph, Ghanshyam Jhala, Subroto Mukherjee

The Effects of Chloride Ion Concentration on the Pitting Behavior of 309L Cladding by Using Micro-Electrochemical Measurement and In Situ Optical Observation

Tong Zhang, Qi Guo, Jian Xu, Tetsuo Shoji

High Phosphorus Pig Iron as Sacrificial Anode in Seawater

Nisheeth Kr. Prasad, A. S. Pathak, S. Kundu, Pankaj Panchal, K. Mondal

Effects of Different Cathodic Reactions on Tribocorrosion Behavior of AISI 430 in 0.5 mol/L Sulfuric Acid

Zhixin Dai, Ming Liu, Shengli Jiang, Mingyang Li, Shu Li, Deli Duan

Nanoindentation to Determine Young’s Modulus for Thermoplastic Polymers

Ahcene Mokhtari, Nacer Tala-Ighil, Youcef Amine Masmoudi

Al-10 wt.%Zn/Al2O3@ZnO Microcapsules for High-Temperature Thermal Storage: Preparation and Thermal Properties

Qinglin Li, Xiaodong Ma, Xiaoyu Zhang, Jiqiang Ma, Xiaowu Hu, Yefeng Lan

Research on Corrosion Circumferential Area Characterization for Steel Cable Bundle Based on Metal Magnetic Memory

Hong Zhang, Runchuan Xia, Jianting Zhou, Ye Yuan, Houxuan Li

Effects of Dynamic Precipitation and Processing Parameters on Dynamic Recrystallization Behavior of 2195 Al-Cu-Li Alloy during Hot Compression

You-jie Guo, Jin-feng Li, Ding-ding Lu, Hong Ning, Wen You, Yong-lai Chen, Peng-cheng Ma, Xu-hu Zhang, Zhuo-ran Zeng, Rui-feng Zhang

Effect of the Mn Amount on the Structural, Thermal, and Magnetic Properties of Rapidly Solidified (87-x)Cu-13Al-xMn (wt.%) Alloy Ribbons

Sefa Emre Sünbül, Kürşat İçin, Murat Eroğlu, Sultan Öztürk

Effects of Thickness Offset on the Tube-to-Tube Sheet Expansion Joint Strength: An Experimental Evaluation

R. Yoganathan, N. Siva Shanmugam, Anand Ramanathan

Effect of Scanning Strategy on Mechanical Properties of Ti-6Al-4V Alloy Manufactured by Laser Direct Energy Deposition

Marina O. Gushchina, Yulia O. Kuzminova, Egor A. Kudryavtsev, Konstantin D. Babkin, Valentina D. Andreeva, Stanislav A. Evlashin, Evgeniy V. Zemlyakov

Microstructure, Mechanical Behavior, and Thermal Conductivity of Three-Dimensionally Interconnected Hexagonal Boron Nitride-Reinforced Cu-Ni Composite

• Technical Article

Zahid Hussain, Haneul Jang, HyunJoo Choi, Byung-Sang Choi

Five-Year Field Exposure for Visualized Corrosion of STK400 Graded Steel Pile in Brackish Environment of Phu My Industrial Port (Southern Vietnam)

Vinh-Dat Vuong, Duc-Binh Nguyen, Ngoc-Thanh Pham, Anh-Tu Tran, Marina Kawai, Anh Quang Vu, Nguyen Danh Thao, Thang Van Le

Activated Carbon Loaded with Ti3+ Self-Doped TiO2 Composite Material Prepared by Microwave Method

Yingjie Xu, Qi Zhang, Guiyu Jiang, Hongying Xia, Wuchen Cai, Heng Yan

Electrochemical Stability and Biofouling Behavior of Differently Polarized Ti Surfaces in Simulated and Natural Seawater

Zhaoxia Dai, Zi Ming Wang, Dajiang Zheng, Guang-Ling Song, Danqing Feng, Matthew Dargusch, Hui Chang, Lian Zhou

Role of Initial Surface Roughness in Different Oxidation Stages of TP347H at 700 °C

• Technical Article

Jian Li, Tieshan Cao, Conghui Zhang, Congqian Cheng, Jie Zhao

Machining Characteristics of the New Cu-35Zn-1.89Al Leadless Free-cutting Brass by Elliptical Ultrasonic Vibration-Assisted Turning

Morteza Adineh

Effect of Thermal Exposure Simulating Vapor Deposition on the Impact Behavior of Additively Manufactured AlSi10Mg Alloy

• Open Access

L. Lattanzi, M. Merlin, A. Fortini, A. Morri, G. L. Garagnani

Automated Grain Counting for the Microstructure of Mg Alloys Using an Image Processing Method

Fatih Akkoyun, Ali Ercetin

Different Phenomena Encountered during Dilatometry of Low-density Steels

• Open Access

Pello Jimbert, Teresa Guraya, Idurre Kaltzakorta, Teresa Gutiérrez, Roberto Elvira, Leili Tafaghodi Khajavi

Study on the Fracture Toughness of 3D Printed Engineering Plastics

Yang Yang, Ye Liu, Wenfeng Hao, Guangping Guo, Xinwen Cheng

Comparison Between the Wear Behavior of U68CuCr and U71MnG Rail Steels

• Technical Article

Xue Su, Min Zhu, Guang Xu, Qi Zhang, Feng Cai, Man Liu

Corrosion Resistance Improvement of an Extruded Mg-Gd-Y-Zn-Zr-Ca via Aging Treatment

• Technical Article

Xiang Yuan, Yuzhou Du, Dan Dong, Dongjie Liu, Bailing Jiang

Tara Tannins as a Green Sustainable Corrosion Inhibitor for Aluminum

Christian E. Byrne, Oriana D’Alessandro, Cecilia Deyá

Enhancement of Physical and Mechanical Characteristics of NiTi Composite Containing Ag and TiC

• Technical Article

Avadesh K Sharma, Rajeev Singh, Arun K Tiwari, Ajay K Sharma

Interactions in the Interface Between Coal Ash and Al2O3 Substrate at High Temperatures Induced by the Addition of CaO

Xia Baoliang, Li Hanxu, Mao Lirui, Wu Chengli, Jiao Facun

Parameter Optimization of Powder Metallurgy Material Impregnated with Diamond Nanoparticle Suspension

Lupeng Wu, Weijie Shi, Tian Zhang, Chuanhui Yang, Haixia Zhao

Experimental Study of the Wear Performance of Fused Deposition Modeling Printed Polycarbonate-Acrylonitrile Butadiene Styrene Parts Using Definitive Screening Design and Machine Learning-Genetic Algorithm

Omar Ahmed Mohamed, Syed Hasan Masood, Jahar Lal Bhowmik

Study on the Heat-Affected Zone, Microstructure, and Surface Quality of TB8 Titanium Alloy Treated by Laser-Assisted Micromachining

Jinkai Xu, Guibin Sun, Changtai Zhai, Jiwen Tian, Xiaoyu Nie, Huadong Yu

Atomic Simulation of Crystallographic Orientation Effect on Void Shrinkage and Collapse in Single-Crystal Copper under Shock Compression

Man Wang, Yanqiu Zhang, Shuyong Jiang

Fracture Mechanism and Gurson–Tvergaard–Needleman Damage Modeling of NbTi Alloy

• Technical Article

Jun Liu, Jianying Zhang, Chao Lei, Yanhong Liu, Xiaguang Sun, Wenting Tang

Effect of Laser-Clad NiCrAl-SiC Coatings on Friction-Wear Performance of AISI H13 Steel at High Temperature

Tang Wei, Kong Dejun

Experimental, Modeling, and Optimization Investigation on Mechanical Properties and the Crashworthiness of Thin-Walled Frusta of Silica/Epoxy Nano-composites: Fuzzy Neural Network, Particle Swarm Optimization/Multivariate Nonlinear Regression, and Gene Expression Programming

A. Dadrasi, M. Shariati, Gh. A. Farzi, S. Fooladpanjeh

Influence of Offset Distance of Hole on Explosive Crack Propagation of Polymethyl Methacrylate Plate by Caustics Method

Chengxiao Li, Yuantong Zhang, Yiqiang Kang, Haohao Luo, Bin Xu

Effect of Quasicrystal I-Phase on Microstructure and Mechanical Properties of Hot-Rolled Diphasic Mg-8 wt.% Li Alloy

Xiang Cai, Zan Wang, Xinyi Wang, Yanxin Qiao, Daokui Xu, Jian Zhou, Feng Xue

Durable Coating with Modified Graphene Oxide for Aircraft Structural CIC Application

Xiaotian Xi, Guangbing Luo, Huan Zhang, Yongjiao Song, Longfei Yi, Yi Wang, Lijuan Zhao, Hong Zhou, Jinrong Wu

Design of Anti-frictional Ceramic-Based Composite Coatings

Swarn Jha, Yan Chen, Peter Renner, Raj Likhari, Weston Stewart, Mohamed Gharib, Hong Liang

Effect of Al2O3 Nanoparticles and Heat Treatment on the Wear Resistance of Electrodeposited Ni-W/Al2O3 Composite Coatings

Xinyang Shi, Zhongquan Zhang, Leyu Dai, Yin Lv, Zhao Xu, Yibiao Yin, Zhiqun Liao, Guoying Wei

Quasi-Static Compression and Deformation Behavior of Additively Manufactured Flexible Polymeric Lattice Structure

Uzair Ahmed Dar, Haris Hameed Mian, Muhammad Abid, Muhammad Bilal Nutkani, Abuzar Jamil, Muhammad Zakir Sheikh

Effect of Mode of Heating on Cyclic Temperature Range during Partial Thermal Cycling under Constant Stress of a Near-Equiatomic Ni-Ti Shape Memory Alloy

G. Swaminathan, V. Sampath

Investigation of Mechanical and Wear Characteristics of Forged Fe-Al-C Intermetallic Quaternary Alloyed with Zr/Ti

Ravi Kant, U. Batra, U. Prakash

Competitive Effect of Grain Size and Second Phase on Corrosion Behavior of Biodegradable Mg-3Zn-1Mn-xSr Alloys

Xinming Di, Chunxiang Xu, Jinxiang Wu, Yuxing Dong, Qun Shi

Effect of V Content on Phase Formation and Mechanical Properties of the CoFeNiMnVx High-Entropy Alloys

Man Zhu, Mao Zhang, Lijuan Yao, ZiQi Jie, Yongqin Liu, Kun Li, Zengyun Jian

Effect of Carbon Nanotube Content on Microstructure, Mechanical Properties and Oxidation Properties of FeAl Intermetallic Compounds

Yaping Bai, Jin Zhou, Naqing Lei, Jianping Li, Zhong Yang

Synergetic Effect of Corrosion and Ultrasonic Cavitation Erosion on Leaded Brass

Haixia Liu, Zhuo Deng, Jie Chen, Can Kang, Bing Li

Characterization of the Corrosion Resistance of Composite Peened Aluminum

• Open Access

Malte L. Flachmann, Michael Seitz, Wilfried V. Liebig, Kay A. Weidenmann

Microstructure and Properties Evolution Mechanism of AA7020 Twin-Roll Cast Sheets with Different Zirconium Contents

Zhen Xu, Tan Zhao, Hongbin Wang, Longhao Zhu, Shengli Li, Yaohui Jin, Qiqiang Han

Structure and Tribo-Mechanical Properties of MoSx:N:Mo Thin Films Synthesized by Reactive dcMS/HiPIMS

• Open Access
• Technical Article

Wolfgang Tillmann, Alexandra Wittig, Dominic Stangier, Carl-Arne Thomann, Jörg Debus, Daniel Aurich, Andreas Brümmer

The Effect of Twins on Mechanical Properties and Microstructural Evolution in AZ31 Magnesium Alloy during High Speed Impact Loading

Xiao Liu, Quanhui Wan, Hui Yang, Biwu Zhu, Yuanzhi Wu, Wenhui Liu, Changping Tang

The Yttrium-Incorporated Aluminizing of Mg-3%Al Alloy for Improved Tribological and Corrosion Properties

• Technical Article

Meisam Nouri, D. Y. Li

New Insights to Understand the Influence of Nb/Mo on Hydrogen Embrittlement Resistance of Warm-Rolled Medium-Mn Steels

Haijun Pan, Xinyu Li, Bo Qiao, Yi Zhang, Naiming Miao, Lin Liu, Hua Ding, Minghui Cai

Studies on Microstructure and Mechanical Properties of Weldments Produced in 12 mm Thick Naval Grade High Strength Low Alloy Steel for Sub-Zero Application by Single and Double Pass Hybrid Laser Arc Welding

M. Venkatesh Kannan, N. Arivazhagan, M. Nageswara Rao, G. Madhusudhan Reddy, K. V. Phani Prabhakar, Padmanmabham Gadhe

Interfacial Bonding Behavior and Mechanical Properties of a Bimetallic Ring Blank Subjected to Centrifugal Casting Process

Yujin Wang, Fangcheng Qin, Huiping Qi, Haiquan Qi, Zhengbing Meng

Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy

Chandan Choudhary, Kanai Lal Sahoo, Himadri Roy, Durbadal Mandal

Investigating Growth of Iron Borides with the Formation of Monolithic Fe2B Layer on AISI 304 Stainless Steel via Cathodic Reduction and Thermal Diffusion-Based Boriding

M. Arslan, M. Karimzadehkhoei, G. Kartal Sireli, O. K. Coskun, M. Sert, S. Timur

Effect of Single-Pass Large-Strain Rolling on Microstructure and Mechanical Properties of Al-3Li-1Cu-0.2Er-0.1Zr Alloy

Zhenzhao Yang, Yang Liao, Ruizhi Wu, Dongpeng Sun, Meiduo Liu, Yang Wang

Role of Heat Input and Ti Addition on Microstructure Evolution, Mechanical Property, and Corrosion Behavior of Welded Joint Produced by Hybrid Laser-Arc Welding of High-Strength Low Alloy Steel

Nan Pan, Zhenguang Liu, Chuanbo Zheng, Cheng Zhang

The Effect of Bonding Time on Dissimilar Joint Properties Between Inconel 625 and AISI 316L Using Transient Liquid Phase Bonding Method with Cu Interlayer

Mehrdad Ajabshiri, Morteza Shamanian, Ali Ashrafi, Mohammad Ali Karimi

An Investigation on Microstructures and Mechanical Properties of Twinning-Induced Plasticity Steels Prepared by Directional Solidification

Dan Wang, Wen Wang, Yingjie Huang, Xinfu wang

Comparison of the Effect of Equal Channel Angular Pressing, Expansion Equal Channel Angular Pressing, and Hybrid Equal Channel Angular Pressing on Mechanical Properties of AZ31 Mg Alloy

Serkan Öğüt, Hasan Kaya, Aykut Kentli

Microstructure and Mechanical Property Improvement of AZ31B Induced by the Combination of Cold Metal Transfer Welding and Friction Stir Processing

Jianzhou Long, Zhimin Wang, Fengliang Yin, Yue Zhao, Jianwei Li, Tiejun Zhang, Wang Gang

Effect of Laser Melting Process on a Modified AA7075 Alloy with Ti-B-Zr Modifiers

A. M. Khalil, I. S. Loginova, A. N. Solonin

Investigation on Intermetallic Compounds Formation and Effect of Reinforcing Particles during Friction Stir Vibration Brazing

• Technical Article

Vahid Salimiyan Rizi, Mahmoud Abbasi, Behrouz Bagheri

Effect of Warm Compaction and Lubricant on Microstructure and Properties of Iron-Based Alloy

• Technical Article

Xiaobin Hu, Zili Liu, Xiqin Liu, Huanjian Xie, Cheng Zhang, Yuwen Zou

Effect of Prolonged Aging and Subsequent Swaging on the Microstructural Evolution and Mechanical Properties of AA6061 Alloy

Wahdat Ullah, Gouthama

Correction to: On the Influence of Surface Hardening Treatments on Microstructure Evolution and Residual Stress in Microalloyed Medium Carbon Steel

• Open Access
• Correction

Andreas Fischer, Berthold Scholtes, Thomas Niendorf

Correction to: Bismuth Existing in 1215MS Steel Affecting Grain Size and Thermal Expansion

• Correction

Jian-bo Xie, Tao Hu, Liang-mei Zhong, Jian-xun Fu