Skip to main content
main-content

Zeitschrift

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 4-5/2011

Ausgabe 4-5/2011

Special Issue: SMST 2010

Inhaltsverzeichnis ( 61 Artikel )

01.07.2011 | Ausgabe 4-5/2011

Editorial

David S. Grummon, M. R. Mitchell, Matthias Mertmann

01.07.2011 | Ausgabe 4-5/2011

Design of a Telescopic Linear Actuator Based on Hollow Shape Memory Springs

Andrea Spaggiari, Igor Spinella, Eugenio Dragoni

01.07.2011 | Ausgabe 4-5/2011

Actuators and Drivers Based on CuAlNi Shape Memory Single Crystals

S. Pulnev, V. Nikolaev, A. Priadko, A. Rogov, I. Vahhi

01.07.2011 | Ausgabe 4-5/2011

Processing and Damping Properties of Sputtered NiTi Thin Films for Tools in Machining Processes

F. Kahleyss, R. Lima de Miranda, T. Surmann, C. Zamponi, C. Machai, D. Biermann, E. Quandt

01.07.2011 | Ausgabe 4-5/2011

Long-Time Stability of Ni-Ti-Shape Memory Alloys for Automotive Safety Systems

Joachim Strittmatter, Paul Gümpel

01.07.2011 | Ausgabe 4-5/2011

Processing of NiTi Foams by Transient Liquid Phase Sintering

Ampika Bansiddhi, David C. Dunand

01.07.2011 | Ausgabe 4-5/2011

Property of Amorphous/Nanocrystalline Hybrid Wires of TiNi-Base Shape Memory Alloys

Koichi Tsuchiya, Tadahiro Koike

01.07.2011 | Ausgabe 4-5/2011

Mechanical Properties of Highly Porous NiTi Alloys

Martin Bram, Manuel Köhl, Hans Peter Buchkremer, Detlev Stöver

01.07.2011 | Ausgabe 4-5/2011

A Study of the Properties of a Room Temperature Martensitic Binary Nitinol Alloy Above and Below its Martensite to Austenite Transformation Temperature

Dennis W. Norwich

01.07.2011 | Ausgabe 4-5/2011

Numerical Studies on the Seismic Retrofit of Bridges Using Shape Memory Alloys

Donatello Cardone, Giuseppe Perrone, Salvatore Sofia

01.07.2011 | Ausgabe 4-5/2011

Functional Characterization of Shape Memory CuZnAl Open-Cell Foams by Molten Metal Infiltration

S. Arnaboldi, P. Bassani, F. Passaretti, A. Redaelli, A. Tuissi

01.07.2011 | Ausgabe 4-5/2011

Simulated and Experimental Damping Properties of a SMA/Fiber Glass Laminated Composite

S. Arnaboldi, P. Bassani, C. A. Biffi, A. Tuissi, M. Carnevale, N. Lecis, A. LoConte, B. Previtali

01.07.2011 | Ausgabe 4-5/2011

Smart Control Systems for Smart Materials

Horst Meier, Alexander Czechowicz, Christoph Haberland, Sven Langbein

01.07.2011 | Ausgabe 4-5/2011

Strategies for Self-Repairing Shape Memory Alloy Actuators

Sven Langbein, Alexander Jaroslaw Czechowicz, Horst Meier

01.07.2011 | Ausgabe 4-5/2011

Model and Simulation of an SMA Enhanced Lip Seal

Rui Qiao, Xiujie Gao, L. Catherine Brinson

01.07.2011 | Ausgabe 4-5/2011

Accelerated Fatigue Testing of Stent-Like Diamond Specimens

A. Zipse, M. Schlun, G. Dreher, J. Zum Gahr, N. Rebelo

01.07.2011 | Ausgabe 4-5/2011

Design, Analysis, and Simulated Testing of a Surrogate Nitinol Fatigue Specimen

Stuart E. Kari

01.07.2011 | Ausgabe 4-5/2011

Nitinol Fatigue Investigation on Stent-Finish Specimens Using Tension-Tension Method

Z. Lin, K. Pike, A. Zipse, M. Schlun

01.07.2011 | Ausgabe 4-5/2011

Stress-Induced Martensite in Front of Crack Tips in NiTi Shape Memory Alloys: Modeling Versus Experiments

C. Maletta, M. L. Young

01.07.2011 | Ausgabe 4-5/2011

A Material Model for the Cyclic Behavior of Nitinol

Nuno Rebelo, Achim Zipse, Martin Schlun, Gael Dreher

01.07.2011 | Ausgabe 4-5/2011

Nitinol Fatigue: A Review of Microstructures and Mechanisms

A. R. Pelton

01.07.2011 | Ausgabe 4-5/2011

Effect of Aging on the Microstructure and Shape Memory Effect of a Hot-Rolled NiTiHf Alloy

Mahdi Moshref Javadi, Majid Belbasi, Mohammad T. Salehi, M. Reza Afshar

01.07.2011 | Ausgabe 4-5/2011

Patellar Shape-Memory Fixator for the Treatment of Comminuted Fractures of the Inferior Pole of the Patella

Xin-Wei Liu, Hui-Juan Shang, Shuo-Gui Xu, Zhi-Wei Wang, Chun-Cai Zhang, Qing-Ge Fu

01.07.2011 | Ausgabe 4-5/2011

Treatment of Nonunion of Scaphoid Waist with Ni-Ti Shape-Memory Alloy Connector and Iliac Bone Graft

Lie-Hu Cao, Shuo-Gui Xu, Ya-Le Wu, Chun-Cai Zhang

01.07.2011 | Ausgabe 4-5/2011

Treatment of Clavicular Nonunions with Shape Memory Ni-Ti Alloy Swan-Like Bone Connector

Xin-wei Liu, Shuo-gui Xu, Pan-feng Wang, Chun-cai Zhang

01.07.2011 | Ausgabe 4-5/2011

Expression of TGF-β in Fractures Fixed by Nitinol Swan-like Memory Compressive Connectors

M. Li, C. C. Zhang, S. G. Xu, Q. G. Fu

01.07.2011 | Ausgabe 4-5/2011

An Evaluation of a NiTiCo Alloy and its Suitability for Medical Device Applications

Audrey Fasching, D. Norwich, T. Geiser, Graeme W. Paul

01.07.2011 | Ausgabe 4-5/2011

FE Analysis of Nitinol Leaf Springs Used in a Compression Anastomosis Device

Amir Weizman, Leonid Monassevitch, Kobby Greenberg, Shahar Millis, Boaz Harari, Idan Dar

01.07.2011 | Ausgabe 4-5/2011

Characterization of Two Ti-Nb-Hf-Zr Alloys Under Different Cold Rolling Conditions

M. González, F. J. Gil, J. M. Manero, J. Peña

01.07.2011 | Ausgabe 4-5/2011

Applicability of Shape Memory Alloy Wire for an Active, Soft Orthotic

Leia Stirling, Chih-Han Yu, Jason Miller, Elliot Hawkes, Robert Wood, Eugene Goldfield, Radhika Nagpal

01.07.2011 | Ausgabe 4-5/2011

Nitinol for Prosthetic and Orthotic Applications

Emma Henderson, Arjan Buis

01.07.2011 | Ausgabe 4-5/2011

An EMG-Controlled SMA Device for the Rehabilitation of the Ankle Joint in Post-Acute Stroke

S. Pittaccio, S. Viscuso

01.07.2011 | Ausgabe 4-5/2011

Biomechanical Study of Acetabular Tridimensional Memoryalloy Fixation System

Xin-Wei Liu, Shuo-Gui Xu, Yun-Tong Zhang, Chun-Cai Zhang

01.07.2011 | Ausgabe 4-5/2011

Abrasive Wear of Fe-Mn-Si-Cr-Ni Shape Memory Stainless Steel: Preliminary Results

Christian Egidio da Silva, Heide Heloise Bernardi, Jorge Otubo

01.07.2011 | Ausgabe 4-5/2011

Effects of Cyclic Loading on the Uniaxial Behavior of Nitinol

M. Schlun, A. Zipse, G. Dreher, N. Rebelo

01.07.2011 | Ausgabe 4-5/2011

Analysis of Wire Position and Operating Conditions on Functioning of NiTi Wires for Shape Memory Actuators

C. Zanotti, P. Giuliani, S. Arnaboldi, A. Tuissi

01.07.2011 | Ausgabe 4-5/2011

Nitinol Stent Fatigue in a Peripheral Human Artery Subjected to Pulsatile and Articulation Loading

Sean Michael Harvey

01.07.2011 | Ausgabe 4-5/2011

Theoretical and Experimental Investigation on SMA Superelastic Springs

Gabriele Attanasi, Ferdinando Auricchio, Marco Urbano

01.07.2011 | Ausgabe 4-5/2011

Theoretical and Experimental Study of the Shape Memory Effect of Beams in Bending Conditions

Ferdinando Auricchio, Simone Morganti, Alessandro Reali, Marco Urbano

01.07.2011 | Ausgabe 4-5/2011

Finite-Element Simulation of the Anti-Buckling-Effect of a Shape Memory Alloy Bar

Frank Richter, Oliver Kastner, Gunther Eggeler

01.07.2011 | Ausgabe 4-5/2011

Modeling of Ultrasonic Initiation of Shape Memory Effect

V. V. Rubanik, V. V. Klubovich, V. V. Rubanik Jr., A. V. Shadursky

01.07.2011 | Ausgabe 4-5/2011

A Comparison of Different Nitinol Material Data Sources for Finite Element Analysis

Frank Nagl, Gerd Siekmeyer, Michael Quellmalz, Andreas Schuessler

01.07.2011 | Ausgabe 4-5/2011

A Study on Micro-Machining Technology for the Machining of NiTi: Five-Axis Micro-Milling and Micro Deep-Hole Drilling

D. Biermann, F. Kahleyss, E. Krebs, T. Upmeier

01.07.2011 | Ausgabe 4-5/2011

Comparison of Inclusions in Cold Drawn Wire and Precursor Hot-Rolled Rod Coil in VIM-VAR Nickel-Titanium Alloy

Frank Sczerzenie, Graeme Paul, Clarence Belden

01.07.2011 | Ausgabe 4-5/2011

Production of Nitinol Wire from Elemental Nickel and Titanium Powders Through Spark Plasma Sintering and Extrusion

J. Butler, P. Tiernan, A. A. Gandhi, K. McNamara, S. A. M. Tofail

01.07.2011 | Ausgabe 4-5/2011

Effects of Sn and Zr on the Microstructure and Mechanical Properties of Ti-Ta-Based Shape Memory Alloys

Y. X. Tong, B. Guo, Y. F. Zheng, C. Y. Chung, L. W. Ma

01.07.2011 | Ausgabe 4-5/2011

Effect of Ternary Addition of Iron on Shape Memory Characteristics of Cu-Al Alloys

T. N. Raju, V. Sampath

01.07.2011 | Ausgabe 4-5/2011

Stability in Phase Transformation After Multiple Steps of Marforming in Ti-Rich Ni-Ti Shape Memory Alloy

Andersan dos Santos Paula, Karimbi Koosappa Mahesh, Francisco Manuel Braz Fernandes

01.07.2011 | Ausgabe 4-5/2011

Achieving Small Structures in Thin NiTi Sheets for Medical Applications with Water Jet and Micro Machining: A Comparison

M. Frotscher, F. Kahleyss, T. Simon, D. Biermann, G. Eggeler

01.07.2011 | Ausgabe 4-5/2011

Properties of Porous TiNbZr Shape Memory Alloy Fabricated by Mechanical Alloying and Hot Isostatic Pressing

L. W. Ma, C. Y. Chung, Y. X. Tong, Y. F. Zheng

01.07.2011 | Ausgabe 4-5/2011

Study on Thermomechanical Treatment, Mechanical Properties and Fatigue of Nitinol Superelastic Thin Sheet

Matthias Mertmann, Wolfgang Oswald, Rainer Steegmüller, Andreas Schüssler

01.07.2011 | Ausgabe 4-5/2011

Rapid Obtaining of Nano-Hydroxyapatite Bioactive Films on NiTi Shape Memory Alloy by Electrodeposition Process

A. O. Lobo, J. Otubo, J. T. Matsushima, E. J. Corat

01.07.2011 | Ausgabe 4-5/2011

Determination of Ni Release in NiTi SMA with Surface Modification by Nitrogen Plasma Immersion Ion Implantation

Eliene Nogueira de Camargo, Anderson Oliveira Lobo, Maria Margareth da Silva, Mario Ueda, Edivaldo Egea Garcia, Luc Pichon, Helfried Reuther, Jorge Otubo

01.07.2011 | Ausgabe 4-5/2011

The Effect of Material Removal on the Corrosion Resistance and Biocompatibility of Nitinol Laser-Cut and Wire-Form Products

Jennifer Fino Decker, Christine Trépanier, Lot Vien, Alan R. Pelton

01.07.2011 | Ausgabe 4-5/2011

Effect of Biodegradable Shape-Memory Polymers on Proliferation of 3T3 Cells

Shuo-Gui Xu, Peng Zhang, Guang-Ming Zhu, Ying-Ming Jiang

01.07.2011 | Ausgabe 4-5/2011

Assessment of Corrosion Resistance and Metal Ion Leaching of Nitinol Alloys

Waseem Haider, Norman Munroe

01.07.2011 | Ausgabe 4-5/2011

Cytotoxicity of Metal Ions Released from Nitinol Alloys on Endothelial Cells

W. Haider, N. Munroe, V. Tek, P. K. S. Gill, Y. Tang, A. J. McGoron

01.07.2011 | Ausgabe 4-5/2011

Effect of Manufacturing Process on the Biocompatibility and Mechanical Properties of Ti-30Ta Alloy

P. Gill, N. Munroe, C. Pulletikurthi, S. Pandya, W. Haider

01.07.2011 | Ausgabe 4-5/2011

Cytotoxicity of Ni from Surface-Treated Porous Nitinol (PNT) on Osteoblast Cells

C. Pulletikurthi, N. Munroe, P. Gill, S. Pandya, D. Persaud, W. Haider, K. Iyer, A. McGoron

01.07.2011 | Ausgabe 4-5/2011

Comparison of Optical and SEM-BEI Inclusion Analyses of VIM-VAR Nickel-Titanium Alloy

Frank Sczerzenie, Graeme W. Paul, Clarence Belden, Audrey Fasching

01.07.2011 | Ausgabe 4-5/2011

Development of the Z Specimen for Tensile-Tensile, Tensile-Compression, Compression-Compression Wire Testing

K. Pike, B. Berg, P. Adler

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise