Skip to main content
main-content

Zeitschrift

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 5/2017

Ausgabe 5/2017

Inhaltsverzeichnis ( 52 Artikel )

28.03.2017 | Ausgabe 5/2017

Influence of Direct Annealing Heat Treatment on the Mechanical Properties of As-Casting TWIP Steels

Guojin Sun, Shilian Hu, Yongliang Gao, Wei Chen

04.04.2017 | Ausgabe 5/2017

Method to Predict Tempering of Steels Under Non-isothermal Conditions

D. R. Poirier, A. Kohli

12.04.2017 | Ausgabe 5/2017

Effect of Curved Surface Shape and Feed Velocity on Microstructure and Mechanical Performance of Gray Cast Iron After Spot Continual Induction Hardening

Kai Gao, Xunpeng Qin, Xuliang Chen, Zhou Wang, Zhenhua Zhu, Man Cheng

19.04.2017 | Ausgabe 5/2017

Effect of Annealing Treatments on the Microstructure and Texture Development in API 5L X60 Microalloyed Pipeline Steel

R. Joodaki, S. R. Alavi Zaree, Kh. Gheisari, M. Eskandari

22.03.2017 | Ausgabe 5/2017

Isothermal Oxidation Comparison of Three Ni-Based Superalloys

H. T. Mallikarjuna, N. L. Richards, W. F. Caley

24.03.2017 | Ausgabe 5/2017

Investigation on Hydrogen-Induced Delayed Fracture of Cold-Rolled DP980 Steels

Yun Han, Liang Chen, Shuang Kuang, Chunqian Xie

28.03.2017 | Ausgabe 5/2017

Corrosion Behavior and Microhardness of Ni-P-SiO2-Al2O3 Nano-composite Coatings on Magnesium Alloy

S. Sadreddini, S. Rahemi Ardakani, H. Rassaee

29.03.2017 | Ausgabe 5/2017

Photothermal, Structural, and Microstructural Characterization of SAE4320H Automotive Steel

Alberto Lara-Guevara, Ignacio Rojas-Rodríguez, Ruben Velazquez-Hernandez, David Jaramillo-Vigueras, Karina del Ángel-Sánchez, Mario E. Rodríguez-García

31.03.2017 | Ausgabe 5/2017

Quantification of Microtexture at Weld Nugget of Friction Stir-Welded Carbon Steel

Md M. Husain, R. Sarkar, T. K. Pal, M. Ghosh, N. Prabhu

03.04.2017 | Ausgabe 5/2017

Effect of Nickel Contents on the Microstructure and Mechanical Properties for Low-Carbon Bainitic Weld Metals

Gaojun Mao, Rui Cao, Jun Yang, Yong Jiang, Shuai Wang, Xili Guo, Junjun Yuan, Xiaobo Zhang, Jianhong Chen

03.04.2017 | Ausgabe 5/2017

Film Fabrication Using Poly(Vinylidene Fluoride) Solution Droplet

Noriyasu Yamada, Go Murasawa

05.04.2017 | Ausgabe 5/2017

The Joint Strength and Fracture Mechanisms of TC4/TC4 and TA0/TA0 Brazed with Ti-25Cu-15Ni Braze Alloy

Zhihuan Zou, Fanhao Zeng, Haobo Wu, Jian Liu, Yi Li, Yi Gu, Tiechui Yuan, Fuqin Zhang

10.04.2017 | Ausgabe 5/2017

Tribological Behavior of Plasma-Sprayed Al2O3-20 wt.%TiO2 Coating

Shiyu Cui, Qiang Miao, Wenping Liang, Zhigang Zhang, Yi Xu, Beilei Ren

10.04.2017 | Ausgabe 5/2017

Characteristics of the Transformation of Retained Austenite in Tempered Austempered Ductile Iron

Bingxu Wang, Gary Barber, Xichen Sun, Michael Shaw, Phil Seaton

11.04.2017 | Ausgabe 5/2017

Microbial Activities’ Influence on Three Kinds of Metal Material Corrosion Behaviors

Xia Li, Haiyan Chen, Pimao Chen, Chuangxing Qing, Huanyuan Li

12.04.2017 | Ausgabe 5/2017

Hardness, Electrical Conductivity and Thermal Stability of Externally Oxidized Cu-Al2O3 Composite Processed by SPD

Deping Lu, Jiang Jiang, Lei Lu, Xianjin Liao, Konstantin M. Nesterov, Rinat K. Islamgaliev, Ruslan Z. Valiev, Keming Liu

13.04.2017 | Ausgabe 5/2017 Open Access

Effect of Surface Roughness and Structure Features on Tribological Properties of Electrodeposited Nanocrystalline Ni and Ni/Al2O3 Coatings

Anna Góral, Lidia Lityńska-Dobrzyńska, Marcin Kot

13.04.2017 | Ausgabe 5/2017

Copper Corrosion Under Non-uniform Magnetic Field in 0.5 M Hydrochloric Acid

E. Garcia-Ochoa, F. Corvo, J. Genesca, V. Sosa, P. Estupiñán

17.04.2017 | Ausgabe 5/2017

Influence of Cu Addition on the Structure, Mechanical and Corrosion Properties of Cast Mg-2%Zn Alloy

M. Lotfpour, M. Emamy, C. Dehghanian, K. Tavighi

17.04.2017 | Ausgabe 5/2017

The Effect of Ca Content on the Microstructure, Hardness and Tensile Properties of AZ81 Mg Cast Alloy

S. H. Allameh, M. Emamy

18.04.2017 | Ausgabe 5/2017

Synthesis, Characterization and Electrochemical Behavior of Al/Yb/Co/Mn-Doped α-Ni(OH)2

Xiuwen Jian, Yanjuan Zhu, Wenhua Li, Tengqi Zhao

23.03.2017 | Ausgabe 5/2017

Constitutive Modeling of Warm Deformation Flow Curves of an Eutectoid Steel

H. Rastegari, M. Rakhshkhorshid, M. C. Somani, D. A. Porter

31.03.2017 | Ausgabe 5/2017

Precipitation-Induced Grain Growth Simulation of Friction-Stir-Welded AA6082-T6

Q. Wu, Z. Zhang

11.04.2017 | Ausgabe 5/2017

Development of Processing Maps and Constitutive Relationship for Thermomechanical Processing of Aluminum Alloy AA2219

S. V. S. Narayana Murty, Aditya Sarkar, P. Ramesh Narayanan, P. V. Venkitakrishnan, J. Mukhopadhyay

21.03.2017 | Ausgabe 5/2017

Evaluation of the AISI 904L Alloy Weld Overlays Obtained by GMAW and Electro-Slag Welding Processes

Jorge C. F. Jorge, O. G. Meira, F. C. A. Madalena, L. F. G. de Souza, L. S. Araujo, M. C. Mendes

27.03.2017 | Ausgabe 5/2017

Effect of Load and Sliding Rate on the Wear Behavior of Ti-Containing TWIP Steel

V. H. Mercado, I. Mejía, A. Bedolla-Jacuinde

31.03.2017 | Ausgabe 5/2017

Study on Corrosion and Stress Corrosion Cracking Behaviors of AZ31 Alloy in Sodium Sulfate Solution

Xiuli He, Zhifeng Yan, Hongyu Liang, Yinghui Wei

31.03.2017 | Ausgabe 5/2017

Passive Film Properties and Electrochemical Behavior of Co-Cr-Mo Stainless Steel in Chloride Solution

Hong Luo, Chaofang Dong, Kui Xiao, Xiaogang Li

03.04.2017 | Ausgabe 5/2017

On the Effects of the Rejuvenation Treatment on Mechanical and Microstructural Properties of IN-738 Superalloy

Cosimo Monti, Alessandro Giorgetti, Leonardo Tognarelli, Francesco Mastromatteo

04.04.2017 | Ausgabe 5/2017 Open Access

Low-Cycle Fatigue Properties of a Nickel-Based Superalloy Haynes 282 for Heavy Components

Junjing He, Rolf Sandström, Sandro Notargiacomo

04.04.2017 | Ausgabe 5/2017

Assessment of Pipe Coupling by Using the Recovery of Stress-Induced Martensites in Superelastic Cu-11.8Al-0.6Be-0.5Nb Alloy

Danniel F. de Oliveira, Ieverton Caindre A. Brito, Fabio José C. França, Severino Jackson G. de Lima, Tadeu Antonio A. Mello, Rodinei M. Gomes

07.04.2017 | Ausgabe 5/2017

Studies on the Biotribological and Biological Behavior of Thermally Oxidized Ti6Al4V for Use in Artificial Cervical Disk

Song Wang, Junhui Li, Junzhe Lu, Rajnesh Tyagi, Zhenhua Liao, Pingfa Feng, Weiqiang Liu

10.04.2017 | Ausgabe 5/2017

Effect of Powder-Feeding Modes During Plasma Spray on the Properties of Tungsten Carbide Composite Coatings

Yi-ming Zhong, Xiao-dong Du, Gang Wu

10.04.2017 | Ausgabe 5/2017

Crack Initiation and Growth from Pre-corroded Pits in Aluminum 7075-T6 Under Laboratory Air and Salt Water Environments

G. Joshi, S. Mall

10.04.2017 | Ausgabe 5/2017

Investigation of Tribological Behaviors of TiAl-Multilayer Graphene-Microsphere Composites at Different Applied Loads

Zhao Yan, Jialiang Zou, Xiaoliang Shi, Kang Yang, Yuchun Huang, Xiyao Liu, Xiaobin Deng, Zhihai Wang, Yufu Wang

10.04.2017 | Ausgabe 5/2017

Effects of Friction Layer Thickness on the Tribological Performance of Ni3Al-Ag-MoO3

Yuchun Huang, Xiaoliang Shi, Kang Yang, Jialiang Zou, Qiao Shen, Yufu Wang, Zhihai Wang

11.04.2017 | Ausgabe 5/2017

Galvanic Corrosion Behavior of Microwave Welded and Post-weld Heat-Treated Inconel-718 Joints

Amit Bansal, Apurbba Kumar Sharma, Pradeep Kumar

12.04.2017 | Ausgabe 5/2017

Compressive Properties of PTFE/Al/Ni Composite Under Uniaxial Loading

Huai-xi Wang, Yu-chun Li, Bin Feng, Jun-yi Huang, Sheng Zhang, Xiang Fang

12.04.2017 | Ausgabe 5/2017

Slow Strain Rate Testing for Hydrogen Embrittlement Susceptibility of Alloy 718 in Substitute Ocean Water

M. P. LaCoursiere, D. K. Aidun, D. J. Morrison

13.04.2017 | Ausgabe 5/2017

Tuning Magnetocaloric Effect to Near-Room Temperature for MnCo1−x Ge0.5Si0.5 Alloys

J. W. Lai, Z. G. Zheng, H. Y. Yu, D. C. Zeng, F. M. Xiao, T. Sun, R. H. Tang

21.03.2017 | Ausgabe 5/2017

Effects of Mo, Ti and B on Microstructure and Mechanical Properties of Underwater Wet Welding Joints

Duo Liu, Ning Guo, Changsheng Xu, Hongliang Li, Ke Yang, Jicai Feng

30.03.2017 | Ausgabe 5/2017

Enhancing Friction Stir Weldability of 6061-T6 Al and AZ31B Mg Alloys Assisted by External Non-rotational Shoulder

Shude Ji, Ruofei Huang, Xiangchen Meng, Liguo Zhang, Yongxian Huang

30.03.2017 | Ausgabe 5/2017

A Comparative Study of Constitutive and Neural Network Models for Flow Behavior of Mg-5.9Zn-1.6Zr-1.6Nd-0.9Y Alloy and Processing Maps

Liangming Yan, Di An, Ge Shi, Mingzhe Bian, Asit Kumar Khanra, Huiting Wang

04.04.2017 | Ausgabe 5/2017

Dynamic Recrystallization Behavior and Texture Evolution of NiAl Intermetallic During Hot Deformation

Zhenhan Huang, Zhen Lu, Shaosong Jiang, Chongyang Wang, Kaifeng Zhang

06.04.2017 | Ausgabe 5/2017

Plasma-Sprayed Fine-grained Zirconium Silicate and Its Dielectric Properties

P. Ctibor, Z. Pala, B. Nevrlá, K. Neufuss

10.04.2017 | Ausgabe 5/2017

Investigation on Conductive Layer, Delamination, and Recast Layer Characteristics of Electro-discharge Machined Holes in TBCs

Li Wang, Yongfeng Guo, Guowei Zhang

10.04.2017 | Ausgabe 5/2017

Increasing Wear Resistance of Titanium Alloys by Anode Plasma Electrolytic Saturation with Interstitial Elements

P. N. Belkin, S. A. Kusmanov, I. G. Dyakov, S. A. Silkin, A. A. Smirnov

11.04.2017 | Ausgabe 5/2017

Strengthening Effect of Incremental Shear Deformation on Ti Alloy Clad Plate with a Ni-Based Alloy Laser-Clad Layer

W. Zhao, G. C. Zha, F. X. Kong, M. L. Wu, X. Feng, S. Y. Gao

11.04.2017 | Ausgabe 5/2017

Pressureless Sintering of Mo-Si-B Alloys with Fe Additive

Gaoyuan Ouyang, Pratik K. Ray, Matthew J. Kramer, Mufit Akinc

11.04.2017 | Ausgabe 5/2017

A Revisited Study of the Processing Map and Optimized Workability of AZ61 Magnesium Alloy

X. Zhou, R. R. Liu, H. T. Zhou, W. X. Jiang

12.04.2017 | Ausgabe 5/2017

Microstructure and Mechanical Properties of Fe-18Mn-18Cr-0.5N Austenitic Nonmagnetic Stainless Steel in Asymmetric Hot Rolling

Y. L. Song, C. S. Li, B. Ma, Y. H. Han

18.04.2017 | Ausgabe 5/2017

Flow Behavior, Dynamic Recrystallization and Processing Map of Mg-20Pb-1.6Al-0.4B Alloy

R. Y. Li, Y. H. Duan, L. S. Ma, S. Chen

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise