Skip to main content
main-content

Zeitschrift

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 5/2020

Ausgabe 5/2020

Inhaltsverzeichnis ( 67 Artikel )

28.05.2020 | Ausgabe 5/2020

Influence of Load, Surface Finish and Lubrication on Friction Coefficient of AISI 304 Stainless Steel

J. Dib, S. Hereñu, D. Alí, N. Pellegri

27.04.2020 | Ausgabe 5/2020

Effect of Dynamic Recrystallization on Grain Refinement during Interactive Alternating Forward Extrusion of AZ31B Magnesium Alloy

Yu Wang, Feng Li, Ye Wang, Lei Gao

14.05.2020 | Ausgabe 5/2020

Crack Behavior and Crystallographic Feature for TMCP690 Steel under Fatigue Loading

Xiangyang Wu, Xu Zhao, Weihua Zhang, Hui Chen

27.04.2020 | Ausgabe 5/2020

Electrophoretic Deposition of Titanium Oxide on Wollastonite Glass–Ceramic Scaffold for Tissue Engineering

Kiana Karimi, Parvin Alizadeh, Hamid Abdoli

05.05.2020 | Ausgabe 5/2020

Strength–Ductility Trade-Off in Dual-Phase Steel Tailored via Controlled Phase Transformation

Ashok K. Srivastava, Nand K. Patel, B. Ravi Kumar, Ashutosh Sharma, Byungmin Ahn

27.04.2020 | Ausgabe 5/2020

In Situ Raman Spectroscopic Analysis on Carbon Steel, Immersed in Aqueous Solutions at Different pH and Anions

C. Thinaharan, R. P. George, John Philip

27.04.2020 | Ausgabe 5/2020

Cavitation Erosion Damage Mechanism of a Duplex Stainless Steel Having a Ferrite-Austenite-Sigma-Phase Triplex Microstructure

Wenji Ai, K. H. Lo, Xiang Li, C. T. Kwok, Hui Pan

30.04.2020 | Ausgabe 5/2020

Influence of Drawing Velocity on the Inner Quality of Single-Crystal Superalloy

Maodong Kang, Junwei Yu, Jun Wang, Baode Sun

12.05.2020 | Ausgabe 5/2020

Effect of Shape, Density, and an Array of Dimples on the Friction and Wear Performance of Laser Textured Bearing Steel under Dry Sliding

Manish Kumar, Vinayak Ranjan, Rajnesh Tyagi

04.05.2020 | Ausgabe 5/2020

HMDSO-Based Thin Plasma Polymers as Corrosion Barrier Against NaOH Solution

Montgomery Jaritz, Christian Hopmann, Stefan Wilski, Lara Kleines, Marcel Rudolph, Peter Awakowicz, Rainer Dahlmann

04.05.2020 | Ausgabe 5/2020 Open Access

Crystallization of Mechanically Alloyed Ni50Ti50 and Ti50Ni25Cu25 Shape Memory Alloys

Piotr Salwa, Tomasz Goryczka

07.05.2020 | Ausgabe 5/2020

Effect of Ni Content on Microstructure and Performance of Ni/Ceramic Composite Coating

Yaqi Li, Xi Meng, Ren Li, Fanhao Zeng, Yi Gu

06.05.2020 | Ausgabe 5/2020

N-Doped Graphene Sheet Encapsulated Sulfur Binary Composite as Cathode for Lithium-Sulfur Battery Applications

P. Rajkumar, K. Diwakar, K. Krishnaveni, G. Radhika, R. Subadevi, R. M. Gnanamuthu, Fu-Ming Wang, M. Sivakumar

07.05.2020 | Ausgabe 5/2020

Low Young’s Modulus and High Strength Obtained in Ti-Nb-Zr-Cr Alloys by Optimizing Zr Content

Qiang Li, Chao Cheng, Junjie Li, Ke Zhang, Kai Zhou, Masaaki Nakai, Mitsuo Niinomi, Kenta Yamanaka, Daixiu Wei, Akihiko Chiba, Takayoshi Nakano

08.05.2020 | Ausgabe 5/2020

Tribocorrosion of DIN 16MnCr5 Steel Modified by Carburization and Manganese Phosphate Coating

Wilbert David Wong-Ángel, José Martínez-Trinidad, Iván Campos-Silva, Mario Romero-Romo, Victor Hernández-Hernández, Usiel S. Silva-Rivera, Ricardo Andrés García-León

18.05.2020 | Ausgabe 5/2020

Microstructural, Tribological, and Degradation Properties of Al2O3- and CeO2-Doped 3 mol.% Yttria-Stabilized Zirconia Bioceramic for Biomedical Applications

Mohsen Golieskardi, Meenaloshini Satgunam, Dinesh Ragurajan, Md Enamul Hoque, Angela Min Hwei Ng

12.05.2020 | Ausgabe 5/2020

Design of Novel Non-equiatomic Cu-Ni-Al-Ti Composite Medium-Entropy Alloys

Gökhan Polat, Ziya Anıl Erdal, Yunus Eren Kalay

13.05.2020 | Ausgabe 5/2020

Use of the Cold Substrate Method for Biomaterials: The Structural and Biological Properties of the Ag Layers Deposited on Ti-6Al-4V

Zeynep Yeşil Duymuş, Vagif Nevruzoğlu, Sabit Melih Ateş, Ercüment Yüzüak, Murat Tomakin

17.05.2020 | Ausgabe 5/2020

Effect of Soaking Time on the Properties of SrAl12O19/ZTA Composites

S. M. Naga, M. El Shaer, M. Awaad, M. A. Saleh

14.05.2020 | Ausgabe 5/2020

Experimental Characterization and Sintering Behavior in Mixed Atmosphere (N2 and H2) of Fe3P-Added Ferritic Stainless Steel (434L)

Akhileshwar Nirala, Anish Upadhyaya

20.05.2020 | Ausgabe 5/2020

Uniaxial Ratcheting Behavior of a Weather-Resistant Rail Steel: Effect of Mean Stress and Stress Amplitude

P. P. Sarkar, P. C. Chakraborti

21.05.2020 | Ausgabe 5/2020

Enhanced Tribological Performance of a Ni/GO-Coated 2024 Alloy

Yan Luo, Yuan Sun, Yanhong Gu, Jie Zhao, Jian Liang, Wen Yue

20.05.2020 | Ausgabe 5/2020

Study on the Microstructure and Fatigue Behavior of a Laser-Welded Ni-Based Alloy Manufactured by Selective Laser Melting Method

Yu Zhang, XiaoAn Hu, Yun Jiang

19.05.2020 | Ausgabe 5/2020

Effect of Chloride Concentration on Stress Corrosion Behavior and Mechanism of SA516Gr70N Steel in Alkaline NaCl/Na2S Solution

Baijie Zhao, Yi Fan, Bo Zhao, Hao Li, Hongchi Ma, Shiqi Wang

28.05.2020 | Ausgabe 5/2020

Compressive Behavior of 7075 Al-SiO2 Waste Particle Composite Foams Produced with Recycled Aluminum Cans

A. Daoud, M. T. Abou El-Khair, F. Fairouz, E. Mohamed, A. Lotfy

22.05.2020 | Ausgabe 5/2020

Influence of Cu Addition on the Microstructure, Mechanical, and Corrosion Properties of Extruded Mg-2%Zn Alloy

M. Lotfpour, M. Emamy, C. Dehghanian

27.05.2020 | Ausgabe 5/2020

Microstructural Characterization of Inconel 625 Nickel-Based Alloy Weld Cladding Obtained by Electroslag Welding Process

Camila P. Alvarães, Soraia S. Sandes, Jorge C. F. Jorge, Luís F. G. de Souza, Leonardo S. Araújo, Matheus C. Mendes, Jean Dille

27.05.2020 | Ausgabe 5/2020

Performance and Efficiency of Polyurethane Foams under the Influence of Temperature and Strain Rate Variation

Dan Mihai Constantinescu, Dragoş Alexandru Apostol

31.05.2020 | Ausgabe 5/2020

Effect of Si Content on the Formation of {100} <uvw> Orientation in 0.27% Al Non-oriented Electrical Steel during Cell-to-Dendrite Transition Process

Yong Wan, Qingqing Zhao, Yichao Wu, Liqiang Zhang, Yunjin Xia, Yonghong Wen, Liangjun Chen

09.06.2020 | Ausgabe 5/2020

On the Influence of Surface Hardening Treatments on Microstructure Evolution and Residual Stress in Microalloyed Medium Carbon Steel

Andreas Fischer, Berthold Scholtes, Thomas Niendorf

08.06.2020 | Ausgabe 5/2020

Understanding the Friction Behavior of Niobium Sheets during Forming Processes

Alessia Teresa Silvestri, Antonello Astarita, Luca Boccarusso, Alexandre Amorim Carvalho, Massimo Durante, Marco Garlasché

06.05.2020 | Ausgabe 5/2020

Micro-debond Experiment and Analytical Model for Interfacial Fracture Toughness between Single Carbon Fiber and TiO2 Micro-droplet

Rongtao Zhu, Xiang Wang, Chaoyong Li, Xian Wang, Pengfei Huang, Shu Ma

09.06.2020 | Ausgabe 5/2020

Prediction of Peen Forming Stress and Curvature with Dynamic Response of Compressively Prestressed Target

Xudong Xiao, Yong Li, Yao Sun, Pengkang Zhao, Yan Li, Guoqiang Gao

22.05.2020 | Ausgabe 5/2020

Numerical Prediction on the Crashworthiness of Circular and Square Thin-Walled Tubes with Polymeric Auxetic Foam Core

S. Mohsenizadeh, Z. Ahmad, A. Alias

24.04.2020 | Ausgabe 5/2020

Mechanical Properties of Cu-B/Diamond Composites Prepared by Gas Pressure Infiltration

Guangzhu Bai, Yongjian Zhang, Jingjie Dai, Xitao Wang, Hailong Zhang

27.04.2020 | Ausgabe 5/2020

Dry Sliding Wear Behavior of Boron-Doped 205 Manganese Steels

Cemal Carboga, Bulent Aktas, Bulent Kurt

29.04.2020 | Ausgabe 5/2020

Experimental Investigation on Buckling and Post-buckling Behavior of Superelastic Shape Memory Alloy Bars

Amedebrhan M. Asfaw, Muhammad M. Sherif, Guohua Xing, Osman E. Ozbulut

29.04.2020 | Ausgabe 5/2020

Passivation Behavior of 2507 Super Duplex Stainless Steel in Simulated Concrete Pore Solution

M. Zhu, Q. Zhang, Y. F. Yuan, S. Y. Guo, J. Pan

04.05.2020 | Ausgabe 5/2020

Photocatalytic Activity Studies of La-Doped TiO2 Thin Films Prepared by Magnetron Sputtering

Jiaoyu Xiao, Ju Cheng, Jun Su, Jiamu Huang, Hongdong Liu

18.05.2020 | Ausgabe 5/2020

Investigation of Mechanical and Viscoelastic Properties of Flax- and Ramie-Reinforced Green Composites for Orthopedic Implants

Santosh Kumar, Divya Zindani, Sumit Bhowmik

21.05.2020 | Ausgabe 5/2020

Investigations on the Creep Behavior of Friction-Stir-Processed Magnesium Alloy AE42

M. Govindaraju, Uday Chakkingal, Prasad Rao Kalvala, R. Vaira Vignesh, K. Balasubramanian

28.05.2020 | Ausgabe 5/2020 Open Access

Fatigue Strength of 316 L Stainless Steel Manufactured by Selective Laser Melting

Sepehr Hatami, Taoran Ma, Taina Vuoristo, Jens Bertilsson, Ola Lyckfeldt

31.05.2020 | Ausgabe 5/2020

Effect of Etching on Fatigue Properties of DD6 Single-Crystal Superalloy

Jianmin Dong, Jiarong Li

30.05.2020 | Ausgabe 5/2020

Investigation of the Correlation between Hydrogen Cathodic Charging Conditions and Toughness Properties of Longitudinal Submerged Arc Welded X65 Pipeline Steels

H. P. Kyriakopoulou, I. D. Belntekos, A. S. Tazedakis, N. M. Daniolos, P. Karmiris-Obratański, D. I. Pantelis

08.06.2020 | Ausgabe 5/2020

The Examination of Microstructure and Thermal Oxidation Behavior of Laser-Remelted High-Velocity Oxygen Liquid Fuel Fe/Al Coating

Kadir Mert Doleker

28.04.2020 | Ausgabe 5/2020

Significance of Martensite Reversion and Austenite Stability to the Mechanical Properties and Transformation-Induced Plasticity Effect of Austenitic Stainless Steels

Mohammad Javad Sohrabi, Hamed Mirzadeh, Changiz Dehghanian

01.05.2020 | Ausgabe 5/2020

Recrystallization and Strengthening Mechanism in Friction-Stir-Processed Al Powder Compacts

A. Malakar, V. Pancholi, V. V. Dabhade

27.04.2020 | Ausgabe 5/2020

Effect of TiC Content on Tensile Properties, Bend Strength, and Thermal Conductivity of Al-Li-Cu-Mg-Zr Alloy/TiC Composites Produced by Accumulative Roll Bonding

Aboubakr Medjahed, Bingcheng Li, Ruizhi Wu, Legan Hou, Abdelkhalek Henniche, Abdeldjalil Zegaoui, Mehdi Derradji, Islam S. Emam

04.05.2020 | Ausgabe 5/2020

Correlation Between Microstructure and High-Temperature Oxidation Resistance of Jet-Electrodeposited Ni-Based Alloy Coatings

Jinku Yu, Qinyang Li, Xican Zhao, Qi Qiao, Sen Zhai, Jia Zhao

04.05.2020 | Ausgabe 5/2020

Common Mechanical Properties of Diffusion Bonded Joints and Their Corresponding Microstructure Features

Jiangtao Xiong, Yu Peng, Muhammad Samiuddin, Lin Yuan, Jinglong Li

15.05.2020 | Ausgabe 5/2020

Investigation of Tribological and Corrosion Behavior of Cu-Ti Alloy Processed by Multiaxial Cryoforging

S. Ramesh, H. Shivananda Nayaka

13.05.2020 | Ausgabe 5/2020

Microstructure and Mechanical Properties of AA7075 Alloy with Laser High-Temperature Pre-precipitation Process

Kaining Wang, Ruiming Su, Siyi Ma, Yingdong Qu, Rongde Li

11.05.2020 | Ausgabe 5/2020

Wear-Resistant Carbon-Fiber-Reinforced Ti-Based Composite Obtained by Laser Metal Deposition

A. I. Gorunov

13.05.2020 | Ausgabe 5/2020

Effect of Doped Nano-Ni on Microstructure Evolution and Mechanical Behavior of Sn-3.0Ag-0.5Cu (SAC305)/Cu-2.0Be Solder Joint during Isothermal Aging

Zuozhu Yin, Mei Lin, Yongde Huang, Yuhua Chen, Qi Li, Ziyuan Wu

21.05.2020 | Ausgabe 5/2020

Effect of N2/TMS Gas Ratio on Mechanical and Erosion Performances of Ti-Si-C-N Nanocomposite Coatings

A. M. Abd El-Rahman, Ronghua Wei, M. Raaif, F. M. El-Hossary, M. Hammad Fawey, M. Abo El-kassem

20.05.2020 | Ausgabe 5/2020

Selection of Process Parameters for Near-Net Shape Deposition in Wire Arc Additive Manufacturing by Genetic Algorithm

Ashish Kumar, Kuntal Maji

22.05.2020 | Ausgabe 5/2020

Micro–Nano Dual-Scale Particle-Reinforced TiB2/Cu-0.5Cr Composites Prepared by Vacuum Arc Melting

Jiang Feng, Shuhua Liang, Kexing Song, Xiuhua Guo, Yanjun Zhou

20.05.2020 | Ausgabe 5/2020

Isothermal Compression and Concomitant Dynamic Recrystallization Behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy with Initial Martensitic Microstructure

X. H. Shi, Z. H. Cao, Z. Y. Fan, L. Li, R. P. Guo, J. W. Qiao

21.05.2020 | Ausgabe 5/2020

Microstructure and Interfacial Evolution of Sintered NdFeB Permanent Magnet/Steel Joint Soldered with Zn-Sn Alloy

Cui Luo, Xiaoming Qiu, Yuxin Xu, Yuzhen Lu, Fei Xing

26.05.2020 | Ausgabe 5/2020

Resistance Spot Welding of Dissimilar Interstitial-Free and High-Strength Low-Alloy Steels

Gorti Janardhan, Goutam Mukhopadhyay, Kaushal Kishore, Krishna Dutta

09.06.2020 | Ausgabe 5/2020

Micro Powder Hot Embossing of Aluminum Feedstock

Omid Emadinia, Maria Teresa Vieira, Manuel Fernando Vieira

28.04.2020 | Ausgabe 5/2020

Effect of Temper on Deformation and Mechanical Behaviors of Laser Melt-Deposited 12CrNi2 Low-Alloy Steel

Z. X. Li, S. Zhang, X. Cui, C. H. Zhang, J. Chen, J. B. Zhang

27.04.2020 | Ausgabe 5/2020

Effect of Cold Rolling and Aging on the Microstructure and Mechanical Properties of Ti-Nb-Zr Alloy

Feng He, Shuangping Yang, Jimin Cao

29.04.2020 | Ausgabe 5/2020

Effect of Post-aging Heat Treatment on Strength and Local Corrosion Behavior of Ultrafine-Grained 2219 Al Alloy

Songyi Chen, Fushan Li, Qiang Liu, Kanghua Chen, Lanping Huang

06.05.2020 | Ausgabe 5/2020

Effects of Al3Ni and Al7Cr Intermetallics and T6 Heat Treatment on the Microstructure and Tensile Properties of Al-Zn-Mg-Cu Alloy

Mehdi Malekan, Massoud Emamy, Nima Mossayebi, Mehrab Lotfpour

18.05.2020 | Ausgabe 5/2020

Corrosion Behavior of Newly Developed High-Strength Bainitic Railway Wheel Steels

A. P. Moon, K. Chandra Sekhar, S. Mahanty, S. Sangal, K. Mondal

12.05.2020 | Correction | Ausgabe 5/2020

Correction to: Influence of Guillotine Clearance on Cut-Edge Damage to Nonoriented Electrical Steel

Canming Wang, Qiusheng Yan, Jiabin Lu, Xiaowei Zhang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise