Skip to main content
main-content

Zeitschrift

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 6/2015

Ausgabe 6/2015

Special Issue Focus: Innovation in Processing of Light Metals for Transportation Industries: A Symposium in Honor of C. Ravi Ravindran

Inhaltsverzeichnis ( 50 Artikel )

01.06.2015 | Ausgabe 6/2015

Editorial

B. S. Murty, L. Bichler

01.06.2015 | Ausgabe 6/2015

Synthesis and Characterization of Bulk Al-Cu-Fe Based Quasicrystals and Composites by Spray Forming

N. K. Mukhopadhyay, V. Uhlenwinkel, V. C. Srivastava

01.06.2015 | Ausgabe 6/2015

Application of the Billet Casting Method to Determine the Onset of Incipient Melting of 319 Al Alloy Engine Blocks

A. Lombardi, C. Ravindran, R. MacKay

01.06.2015 | Ausgabe 6/2015

Aluminum-Based Cast In Situ Composites: A Review

S. L. Pramod, Srinivasa R. Bakshi, B. S. Murty

01.06.2015 | Ausgabe 6/2015

Investigations on the Stress and Strain Evolution in AZ91D Magnesium Alloy Castings During Hot Tearing

L. Bichler, C. Ravindran

01.06.2015 | Ausgabe 6/2015

Nucleation in Al Alloys Processed By MCDC Casting

A.K. Prasada Rao

01.06.2015 | Ausgabe 6/2015

Experimental and Numerical Analysis of the 6061-Based Nanocomposites Fabricated via Ultrasonic Processing

Shian Jia, Daojie Zhang, Laurentiu Nastac

01.06.2015 | Ausgabe 6/2015

Ultrasonic-Assisted Synthesis of Graphite-Reinforced Al Matrix Nanocomposites

P. Christy Roshini, B. Nagasivamuni, Baldev Raj, K. R. Ravi

01.06.2015 | Ausgabe 6/2015

Some Perspectives on Innovative Processing and Materials Development

Genjiro Motoyasu, Hiroyuki Yamazaki, Atsumi Ohno, Hiroshi Soda, Alexander McLean

01.06.2015 | Ausgabe 6/2015

Solidification Behavior of Mg-Zn and Mg-Zn-Zr Alloys Using In-Situ Neutron Diffraction

A. Elsayed, D. Sediako, C. Ravindran

01.06.2015 | Ausgabe 6/2015

Minimization of Residual Stress in an Al-Cu Alloy Forged Plate by Different Heat Treatments

Ya-Bo Dong, Wen-Zhu Shao, Jian-Tang Jiang, Bao-You Zhang, Liang Zhen

01.06.2015 | Ausgabe 6/2015

Aluminum Matrix Composites Strengthened with CuZrAgAl Amorphous Atomized Powder Particles

Jan Dutkiewicz, Łukasz Rogal, Wojciech Wajda, Agata Kukuła-Kurzyniec, Christian Coddet, Lucas Dembinski

01.06.2015 | Ausgabe 6/2015

Tin Coatings Electrodeposited from Sulfonic Acid-Based Electrolytes: Tribological Behavior

L. N. Bengoa, W. R. Tuckart, N. Zabala, G. Prieto, W. A. Egli

01.06.2015 | Ausgabe 6/2015

Synthesis and Characteristics of ZnS Nanospheres for Heterojunction Photovoltaic Device

Sheng-Hung Chou, Yu-Jen Hsiao, Te-Hua Fang, Po-Hsun Chou

01.06.2015 | Ausgabe 6/2015

Effect of Holding Time on Microstructure and Properties of Transient Liquid-Phase-Bonded Joints of a Single Crystal Alloy

Lu Chai, Jihua Huang, Jinbao Hou, Bo Lang, Li Wang

01.06.2015 | Ausgabe 6/2015

Effects of HA-Coating on the Surface Morphology and Corrosion Behavior of a Co-Cr-Based Implant in Different Conditions

H. Kheimehsari, S. Izman, Mostafa Rezazadeh Shirdar

01.06.2015 | Ausgabe 6/2015

A Comparative Study on the Dry Sliding Wear Behavior of Mild Steel and 6061Al-15wt.%SiCp Composite

Arpita Banerjee, Vedavyas Tungala, Kasturi Sala, Koushik Biswas, Joydeep Maity

01.06.2015 | Ausgabe 6/2015

Measurement and Evaluation of Crystallographic Texture in Ti-3Al-2.5V Tubing

H. Zhang, Z. M. Sheng, W. F. Zhang, Y. H. Wang, M. Q. Yan

01.06.2015 | Ausgabe 6/2015

Non-destructive Magnetic Evaluation of Laser Weld Quality in Hot Rolled Coils

J. N. Mohapatra, I. Chakradhar, K. R. C. Rao, V. V. L. Rao, Marutiram Kaza

01.06.2015 | Ausgabe 6/2015

Preparation and Properties of a Novel Al-Si-Ge-Zn Filler Metal for Brazing Aluminum

Zhiwei Niu, Jihua Huang, Hao Yang, Shuhai Chen, Xingke Zhao

01.06.2015 | Ausgabe 6/2015

On the Stacking Fault Energy Evaluation and Deformation Mechanism of Sanicro-28 Super-Austenitic Stainless Steel

Mohammad Moallemi, Abbas Zarei-Hanzaki, Ahmad Mirzaei

01.06.2015 | Ausgabe 6/2015

Analysis of Phases and Their Role in Strengthening of Cu-Cr-Zr-Ti Alloy

S. Chenna Krishna, G. Sudarsana Rao, Abhay K. Jha, Bhanu Pant, Koshy M. George

01.06.2015 | Ausgabe 6/2015

Mechanical Property of Pure Magnesium: From Orientation Perspective Pertaining to Deviation from Basal Orientation

S. K. Sahoo, R. K. Sabat, S. Panda, S. C. Mishra, S. Suwas

01.06.2015 | Ausgabe 6/2015

Microstructure Evolution and Mechanical Properties of a Ti-Based Bulk Metallic Glass Composite

J. Cui, J. S. Li, J. Wang, H. C. Kou

01.06.2015 | Ausgabe 6/2015

Template-Engaged In Situ Synthesis of Carbon-Doped Monoclinic Mesoporous BiVO4: Photocatalytic Treatment of Rhodamine B

Mingming Yao, Lihua Gan, Mingxian Liu, Pranav K. Tripathi, Yafei Liu, Zhonghua Hu

01.06.2015 | Ausgabe 6/2015

Influences of Processing Time and Discharge Current Density During Pulsed Plasma-Oxidizing process of AISI 316L

J. C. Díaz-Guillén, G. Vargas-Gutiérrez, E. E. Granda-Gutiérrez, J. A. Aguilar-Martínez, M. A. González-Albarrán, L. Álvarez-Contreras

01.06.2015 | Ausgabe 6/2015

Novel Investigation on Nanostructured Multilayer and Functionally Graded Ni-P Electroless Coatings on Stainless Steel

S. R. Anvari, S. M. Monirvaghefi, M. H. Enayati

01.06.2015 | Ausgabe 6/2015

Influence of Diffusion Asymmetry on Kinetic Pathways in Binary Fe-Cu Alloy: A Kinetic Monte Carlo Study

D. Bombac, G. Kugler

01.06.2015 | Ausgabe 6/2015

Defect Prediction and Control for Ultra-high-strength Steel Complex Structure in Hot Forming Based on FEM

Xin Shang, Jie Zhou, Fang Zhuo, Yan Luo, Yang Li

01.06.2015 | Ausgabe 6/2015

Inverse Thermal Analysis of Titanium GTA Welds Using Multiple Constraints

S. G. Lambrakos, A. Shabaev, L. Huang

01.06.2015 | Ausgabe 6/2015

Evaluating the Hot Deformation Behavior of a Super-Austenitic Steel Through Microstructural and Neural Network Analysis

A. Mirzaei, A. Zarei-Hanzaki, M. H. Pishbin, A. Imandoust, Sh. Khoddam

01.06.2015 | Ausgabe 6/2015

Study on the Crack Propagation Behavior of ×80 Pipeline Steel Under AC Application in High pH Solution

M. Zhu, G. F. Ou, H. Z. Jin, C. W. Du, X. G. Li, Z. Y. Liu

01.06.2015 | Ausgabe 6/2015

Effects of Strain Rates on Mechanical Properties and Fracture Mechanism of DP780 Dual Phase Steel

Shengci Li, Yonglin Kang, Guoming Zhu, Shuang Kuang

01.06.2015 | Ausgabe 6/2015

Cavitation and Sand Slurry Erosion Resistances of WC-10Co-4Cr Coatings

Qun Wang, Zhaoxi Tang, Limei Cha

01.06.2015 | Ausgabe 6/2015

Effect of 0.3 wt.% Al Addition in Flowing Liquid Zinc on the Erosion-Corrosion Behavior of Fe-3.5 wt.% B Alloy

Yong Wang, Jiandong Xing, Shengqiang Ma, Guangzhu Liu, Hanguang Fu, Sen Jia

01.06.2015 | Ausgabe 6/2015

On the Specific Role of Microstructure in Governing Cyclic Fatigue, Deformation, and Fracture Behavior of a High-Strength Alloy Steel

K. Manigandan, T. S. Srivatsan

01.06.2015 | Ausgabe 6/2015

Synergistic Inhibition Effect of Zinc Acetylacetonate and Benzothiazole in Epoxy Coating on the Corrosion of Mild Steel

S. M. Amoozadeh, M. Mahdavian

01.06.2015 | Ausgabe 6/2015

Voltammetric Analysis on the Formation of Fe(OH)2 and FeCO3, and on the Reactivity of Passivation of Steel in Carbonate Solutions

Faysal Fayez Eliyan, J. R. Kish, Akram Alfantazi

01.06.2015 | Ausgabe 6/2015

Study on the Wettability and Tribological Behavior of Different Polymers as Bearing Materials for Cervical Prosthesis

Song Wang, Jian Song, Zhenhua Liao, Yuhong Liu, Caixia Zhang, Weiqiang Liu

01.06.2015 | Ausgabe 6/2015

Fatigue Damage Evaluation of Friction Stir Spot Welded Cross-Tension Joints Under Repeated Two-Step Force Amplitudes

Sutep Joy-A-Ka, Yuki Ogawa, Hiroyuki Akebono, Masahiko Kato, Atsushi Sugeta, Yufeng Sun, Hidetoshi Fujii

01.06.2015 | Ausgabe 6/2015

Microstructure Evolution of Al-0.35%Si-0.2%Mg-0.3%Ce Alloy During Hot Extrusion and Its Contributions to Performances

Hengcheng Liao, Yuna Wu, Yongjin Wang

01.06.2015 | Ausgabe 6/2015

Influence of Orientations of Bionic Unit Fabricated by Laser Remelting on Fatigue Wear Resistance of Gray Cast Iron

Zhi-Kai Chen, Ti Zhou, Hai-feng Zhang, Wan-shi Yang, Hong Zhou

01.06.2015 | Ausgabe 6/2015

Laser Shock Processing with Different Conditions of Treatment on Duplex Stainless Steel

E. Castañeda, C. Rubio-Gonzalez, A. Chavez-Chavez, G. Gomez-Rosas

01.06.2015 | Ausgabe 6/2015

Microstructure and Mechanical Properties of Al2024/Ti-6Al-4V Transient Liquid Phase Bonded Joint

M. Samavatian, A. Halvaee, A. Amadeh, S. Zakipour

01.06.2015 | Ausgabe 6/2015

Evaluation of CNT Dispersion Methodology Effect on Mechanical Properties of an AlSi Composite

O. Carvalho, M. Buciumeanu, D. Soares, F. S. Silva, G. Miranda

01.06.2015 | Ausgabe 6/2015

Weld Growth Mechanisms and Failure Behavior of Three-Sheet Resistance Spot Welds Made of 5052 Aluminum Alloy

Yang Li, Fuyu Yan, Zhen Luo, Y. J. Chao, Sansan Ao, Xuetuan Cui

01.06.2015 | Ausgabe 6/2015

Effect of Metal Matrix Alloying on Mechanical Strength of Diamond Particle-Reinforced Aluminum Composites

Hailong Zhang, Jianhua Wu, Yang Zhang, Jianwei Li, Xitao Wang

01.06.2015 | Ausgabe 6/2015

Effect of Boric Acid Concentration on Viscosity of Slag and Property of Weld Metal Obtained from Underwater Wet Welding

Ning Guo, Wei Guo, Changsheng Xu, Yongpeng Du, Jicai Feng

01.06.2015 | Ausgabe 6/2015

A Hybrid Laser Surface Treatment for Refurbishment of Stress Corrosion Cracking Damaged 304L Stainless Steel

R. K. Gupta, R. Sundar, B. Sunil Kumar, P. Ganesh, R. Kaul, K. Ranganathan, K. S. Bindra, V. Kain, S. M. Oak, L. M. Kukreja

01.06.2015 | Erratum | Ausgabe 6/2015

Erratum to: A Comparative Study of Ni49.9Ti50.1 and Ni50.3Ti29.7Hf20 Tube Actuators

J. S. Owusu-Danquah, A. F. Saleeb, B. Dhakal, S. A. Padula II

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise