Skip to main content


Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 6/2020

Ausgabe 6/2020

Special Issue Focus: Selected Articles from 30th Heat Treating Society Conference

Inhaltsverzeichnis ( 67 Artikel )

02.06.2020 | Guest Editorial | Ausgabe 6/2020

Selected Articles from 30th Heat Treating Society Conference

John M. Tartaglia

06.02.2020 | Ausgabe 6/2020

A Brief Review on Test Systems Using a Ball Probe for Determination of Cooling Characteristics of Quenchants

Kyozo Arimoto

21.01.2020 | Ausgabe 6/2020

Carburizing Heat Treatment of Selective-Laser-Melted 20MnCr5 Steel

Mei Yang, Richard D. Sisson Jr.

24.01.2020 | Ausgabe 6/2020

Boro-Austempering Treatment of High-Strength Bainitic Steels

Pedro Gabriel Bonella de Oliveira, Fábio Edson Mariani, Luiz Carlos Casteletti, André Itman Filho, Amadeu Lombardi Neto, George Edward Totten

11.02.2020 | Ausgabe 6/2020

A Comparative Study on Cooling Performance of Hot Oil and Molten Salt Quench Media for Industrial Heat Treatment

K. M. Pranesh Rao, K. Narayan Prabhu

10.02.2020 | Ausgabe 6/2020

Effects of Rapid Induction Heating on Transformations in 0.6% C Steels

Robert Cryderman, Dalton Garrett, Zachary Schlittenhart, Eun Jung Seo

10.02.2020 | Ausgabe 6/2020

Wear Resistance of Niobium Carbide Layers Produced on Gray Cast Iron by Thermoreactive Treatments

Fábio Edson Mariani, Galtiere Corrêa Rêgo, Pedro Gabriel Bonella, Amadeu Lombardi Neto, George Edward Totten, Luiz Carlos Casteletti

27.02.2020 | Ausgabe 6/2020

The Effects of Solutionizing Temperature on the Microstructure of Allvac 718Plus

Geeta Kumari, Carl Boehlert, S. Sankaran, M. Sundararaman

02.03.2020 | Ausgabe 6/2020

Production and Characterization of Boride and Carbide Layers on AISI 15B30 Steel

Rafael Magalhães Triani, Lucas Fuscaldi De Assis Gomes, Amadeu Lombardi Neto, George Edward Totten, Luiz Carlos Casteletti

02.03.2020 | Ausgabe 6/2020

Effect of Low-Temperature Austempering and Quenching and Partitioning Treatments on Adhesive Wear Resistance of High-Silicon Multiphase Steels

Pedro Gabriel Bonella de Oliveira, Ricardo Tadeu Junior Aureliano, Luiz Carlos Casteletti, André Itman Filho, Amadeu Lombardi Neto, George Edward Totten

09.03.2020 | Ausgabe 6/2020

Quantitative Analysis of Microstructural Refinement in Simulated Carburized Microstructures

M. Agnani, O. L. DeNonno, K. O. Findley, S. W. Thompson

16.03.2020 | Ausgabe 6/2020

Effect of Cooling Path on Precipitation Behavior, Microstructure, and Texture Evolution of Micro-alloyed Magnesium Alloy

Yang Liu, Jing Su, Rui Gao, Huiwen Geng, Amjad Javaid, Tim Skszek, Stephen Yue

01.04.2020 | Ausgabe 6/2020

Production of Aluminide Layers on AISI 304 Stainless Steel at Low Temperatures Using the Slurry Process

Rafael Magalhães Triani, Lucas Fuscaldi De Assis Gomes, Ricardo Junior Tadeu Aureliano, Amadeu Lombardi Neto, George Edward Totten, Luiz Carlos Casteletti

02.04.2020 | Ausgabe 6/2020

Effect of Mo in Combination with Nb on Austenite Grain Size Control in Vacuum Carburizing Steels

Eun Jung Seo, John G. Speer, David K. Matlock, Robert L. Cryderman

09.04.2020 | Ausgabe 6/2020

Residual Stress Control on Bearing Steel by Surface Cooled Induction Heating Fast Tempering

Wataru Yoshida

13.04.2020 | Ausgabe 6/2020

Bending Fatigue in Low-Pressure Carbonitriding of Steel Alloys with Boron and Niobium Additions

Larissa Vilela Costa, Denise Corrêa de Oliveira, Douglas Wallace, Vincent Lelong, Kip O. Findley

17.04.2020 | Ausgabe 6/2020

Taguchi Design for Heat Treatment of Rene 65 Components

Christina Maria Katsari, Andrew Wessman, Stephen Yue

24.04.2020 | Ausgabe 6/2020

On the Development of Parametrical Water Quenching Heat Transfer Model Using Cooling Curves by ASTM D6200 Quenchometer

James Jan, D. Scott MacKenzie

20.05.2020 | Ausgabe 6/2020

Impacts of Machining and Heat Treating Practices on Residual Stresses in Alpha-Beta Titanium Alloys

Lesley D. Frame, Indranie Rambarran, Kevin Sala, Cameron Sanders

30.05.2020 | Ausgabe 6/2020

Modeling of Temperature Gradients During Short Time Dilatometry Testing

Robert Goldstein, Tareq Eddir, Ethan Buchner, Robert Cryderman, Andrew Banka, Andrew Senita

25.06.2020 | Ausgabe 6/2020

Insights into the High-Temperature Oxidation Behavior of Austenitic Stainless Steel and Influence of Copper on It

Juan Li, Huaying Li, Guanghui Zhao, Cunlong Zhou, Lifeng Ma, Haitao Liu

29.06.2020 | Ausgabe 6/2020

Effects of Nitrogen Content and Hot Forming Temperature on Prior Austenite Grain Size and Mechanical Properties for Normalizing Cryogenic Pressure-Vessel Steels

Hong Hou, Honghong Wang, Huan Cai

22.06.2020 | Ausgabe 6/2020 Open Access

Modification of Mg2Si Phase Morphology in Mg-4Si Alloy by Sb and Nd Additions

Hao Dong, Siming Xiang, Jie Lv, Yu Wang, Lu Li, Wenbin Yu

10.06.2020 | Ausgabe 6/2020

Study on the Microstructure and Texture Evolution of Hot Forged 20CrMnTiH Steel Spur Bevel Gear by Simulation and Experiment

Xuan Hu, Lin Hua, Xinghui Han

12.06.2020 | Ausgabe 6/2020 Open Access

Improvement of Corrosion Resistance of 13CrMo4-5 Steel by Ni-Based Laser Cladding Coatings

Damian Koclęga, Agnieszka Radziszewska, Stanisław Dymek, Jerzy Morgiel, Łukasz Maj, Axel Kranzmann

08.06.2020 | Ausgabe 6/2020

Microstructural and Tribological Characteristics of In Situ Induced Chrome Carbide Strengthened CoCrFeMnNi High-Entropy Alloys

Yaqiu Yu, Baosen Zhang, Shuaishuai Zhu, Zhijia Zhang, Wenting Lu, Tianying Shen, Zhangzhong Wang

09.06.2020 | Ausgabe 6/2020

Surface Mo-Enrichment and Plasma Carburizing on Sintered Iron: Microstructure and Tribological Properties

T. Bendo, M. L. Hermann, D. B. Salvaro, C. Binder, G. Hammes, J. D. B. de Mello, A. N. Klein

18.06.2020 | Ausgabe 6/2020

Effects of Co on Microstructure, Mechanical Properties, and Corrosion Resistance of Ti-Nb-Zr-Co Biological Alloys

Jie Zhao, Fengcang Ma, Ping Liu, Xinkuan Liu, Wei Li, Daihua He

12.06.2020 | Ausgabe 6/2020

An Investigation on Anisotropy Behavior and Forming Limit of 5182-H111 Aluminum Alloy

Zhaoxuan Hou, Zhigang Liu, Min Wan, Xiangdong Wu, Bing Yang, Xu Lu

12.06.2020 | Ausgabe 6/2020

Microstructure, Tribological Behavior, and Strengthening Mechanisms of the Friction Interface Layer with Nanocrystalline Structure of Ni3Al Matrix Self-lubricating Composites

Yuchun Huang, Jianying Liu, Yubo Meng, Haishu Ma

18.06.2020 | Ausgabe 6/2020

Fabrication Technique and Characterization of Aluminum Alloy-Based Porous Composite Infiltrated with Babbitt Alloy

Lenko Stanev, Mihail Kolev, Ludmil Drenchev, Boyko Krastev

15.06.2020 | Ausgabe 6/2020

Surface Severe Plastically Deformed Nanostructured AA7075 Alloy: Assessment on Tribological and Axial Fatigue Behaviors

Yusuf Efe, Ibrahim Karademir, Fazil Husem, Erfan Maleki, Okan Unal

19.06.2020 | Ausgabe 6/2020

In Situ Synthesis of Polycrystalline Cubic Boron Nitride Reinforced by Different Morphologic TiB2

Shenglin Zhong, Chuan Chen, Zhikai Li, Yang Liu, Bingsai Liu, Yi Wu

22.06.2020 | Ausgabe 6/2020 Open Access

Analysis of the Impact of the Consolidated Material on the Morphology of Briquettes Produced in a Roller Press

Michał Bembenek, Amelia Zięba, Mateusz Kopyściański, Janusz Krawczyk

18.06.2020 | Ausgabe 6/2020

Characterization of the Interfacial Zone Between a HIPed Fe-Based Alloy and a Stainless Steel Container

A. Tellier, M. R. Ardigo-Besnard, J.-P. Chateau-Cornu, R. Chassagnon, J.-M. Fioriani

25.06.2020 | Ausgabe 6/2020

Enhanced Mechanical Properties of a Gradient Nanostructured Medium Manganese Steel and Its Grain Refinement Mechanism

Lei Wang, Meiyu Li, Hao Tan, Yueming Feng, Yuntao Xi

19.06.2020 | Ausgabe 6/2020

Influence of Crystallographic Texture on the Corrosion Product Morphology and Corrosion Rate of AZ31 Plate in Simulated Body Fluid

Hossein Aghamohammadi, Seyed Jamal Hosseinipour, Sayed Mahmood Rabiee, Roohollah Jamaati

26.06.2020 | Ausgabe 6/2020

Factors Influencing the Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V for Biomedical Applications

Zhaotong Yang, Yangzi Xu, Richard D. Sisson Jr., Jianyu Liang

22.06.2020 | Ausgabe 6/2020

Cavitation Erosion and Corrosion Behavior of NiTi Cladding with Cu and Nb Interlayers

Z. P. Shi, Z. B. Wang, F. G. Chen, Y. X. Qiao, L. M. Zhang, T. Y. Xiong, Y. G. Zheng

22.06.2020 | Ausgabe 6/2020

Spheroidization Mechanism of Lamellar δ Phase in Inconel 718 during Delta Processing

Hong-yan Gan, Ming Cheng, Zhen-xing Guo, Qing-an Tai, Grazhina Kozhevnikova, Hong-wu Song, Shi-hong Zhang

22.06.2020 | Ausgabe 6/2020

Hot Deformation Behavior and Processing Maps of a 9Ni590B Steel

Rongbin Li, Yongqiang Chen, Chunxia Jiang, Rulin Zhang, Yanpeng Fu, Tian Huang, Tongtong Chen

23.06.2020 | Ausgabe 6/2020

Carbide Evolution in High-Carbon Martensitic Stainless Cutlery Steels during Austenitizing

Yudan Yang, Hongshan Zhao, Han Dong

25.06.2020 | Ausgabe 6/2020

Microstructure, Texture and Mechanical Properties of Al-Mg-Si Alloy Processed by Multiaxial Compression

Abir Roy, Manish Tiwari, Sandeep Sahu, Sumeet Mishra, Abhishek Kumar

12.06.2020 | Ausgabe 6/2020

Forming Features at Screw Rolling of Austenitic Stainless-Steel Billets

M. M. Skripalenko, B. A. Romantsev, S. P. Galkin, L. M. Kaputkina, M. N. Skripalenko, A. V. Danilin, S. O. Rogachev

15.06.2020 | Ausgabe 6/2020

Computational Investigation of Interface Stresses in Duplex Structure Stainless Steels

Ramana M. Pidaparti, Israr Bin M. Ibrahim, P. Prabaharan Graceraj, Yong Yang, Appajosula S. Rao

15.06.2020 | Ausgabe 6/2020

Effect of Stress State in Rolling Deformation Zone of AZ31 Magnesium Alloy Plate on Edge Cracking

Zhiquan Huang, Chuanlu Qi, Guowei Yang, Hongyu Lai, Yanchun Zhu, Chenchen Zhi

30.06.2020 | Ausgabe 6/2020

A Virtual-Strain-Energy-Density-Based Critical-Plane Criterion to Multiaxial Fatigue Life Prediction

Jing Li, Yuan-ying Qiu, Xiao-long Tong, Lei Gao

08.06.2020 | Ausgabe 6/2020

The Corrosion Resistance Mechanism of Fe-Based Amorphous Coatings Synthesised by Detonation Gun Spraying

Weichao Ning, Haimin Zhai, Rongzhen Xiao, Dongqing He, Gang Liang, Yanrong Wu, Wensheng Li, Xuqiang Li

13.06.2020 | Ausgabe 6/2020

Reciprocating Sliding Wear of Cu, Cu-SiC Functionally Graded Coating on Electrical Contact

Swastika Banthia, Mohammad Amid, Srijan Sengupta, Siddhartha Das, Karabi Das

15.06.2020 | Ausgabe 6/2020

Prediction of Forming of AA 5052-H32 Sheets under Impact Loading and Experimental Validation

Saibal Kanchan Barik, R. Ganesh Narayanan, Niranjan Sahoo

15.06.2020 | Ausgabe 6/2020

Dry Sliding Wear Behavior of AZ91 Alloy Processed by Rotary-Die Equal Channel Angular Pressing

Qiong Xu, Aibin Ma, Bassiouny Saleh, Reham Fathi, Yuhua Li, Jinghua Jiang, Chaoying Ni

15.06.2020 | Ausgabe 6/2020

Determination of Mechanical Properties and Fracture Behavior of Hot-Rolled Inconel 617/Ni Bimetal Composite Plate

Qi Lei, Hefei Huang, Fenfen Han, Guanhong Lei, Cheng Li, Xingtai Zhou

15.06.2020 | Ausgabe 6/2020

Corrosion Inhibition of l-Methionine Amino Acid as a Green Corrosion Inhibitor for Stainless Steel in the H2SO4 Solution

M. Yeganeh, I. Khosravi-Bigdeli, M. Eskandari, S. R. Alavi Zaree

12.06.2020 | Ausgabe 6/2020

Investigation of Mechanical and Tribological Performance of Ti6Al4V-Based Self-Lubricating Composites with Different Microporous Channel Parameters

Hongyan Zhou, Xiaoliang Shi, Ahmed Mohamed Mahmoud Ibrahim, Guanchen Lu, Zhenyu Yang, Yawen Xue

17.06.2020 | Ausgabe 6/2020

Correlation of Microstructure and Fatigue Properties of Hot-Rolled Steel Strips for Automobile Structural Application

Dawei Zhang, Linxiu Du, Liangyun Lan, Cairu Gao, Baoliang Xiao

26.06.2020 | Ausgabe 6/2020

Determination of the Forming-Limit Diagram from Deformations within Necking Instability: A Digital Image Correlation-Based Approach

A. Roatta, M. Stout, J. W. Signorelli

19.06.2020 | Ausgabe 6/2020

Effect of Hydrothermal Treatment Time on Microstructure and Corrosion Behavior of Micro-arc Oxidation/Layered Double Hydroxide Composite Coatings on LA103Z Mg-Li Alloy in 3.5 wt.% NaCl Solution

Ju-mei Zhang, Kai Wang, Xin Duan, Yang Zhang, Hui Cai, Zhi-hu Wang

25.06.2020 | Ausgabe 6/2020

Fatigue Crack Detection in AISI 304 Austenitic Stainless Steel Using Nonlinear and Linear Ultrasonic Testing Methods

Zhenhua Chen, Wei Lu, Yao Chen, Chao Lu

11.06.2020 | Ausgabe 6/2020

Tailoring Tribological Performance of Pure Titanium by a Duplex Treatment of Laser Surface Texturing-Thermal Oxidation

Ruyi Liu, Shuo Yuan, Naiming Lin, Xiuzhou Lin, Zhiqi Liu, Yuan Yu, Zhenxia Wang, Qunfeng Zeng, Wengang Chen, Linhai Tian, Lin Qin, Boqiong Li, Hongxia Zhang, Zhihua Wang, Bin Tang, Yucheng Wu

12.06.2020 | Ausgabe 6/2020

Characterization of Shear Band Formation and Microstructure Evolution during Orthogonal Cutting of Ti-5553: Part I—Shear Angle, Strain and Strain Rate

David P. Yan, Xiaoliang Jin

15.06.2020 | Ausgabe 6/2020

Center Clamp Forming of a Rectangular Cup with Bottom Edge Trimming Using a Continuous Carbon-Fiber-Reinforced Thermoplastic Sheet

D. Tatsuno, T. Yoneyama, R. Watanabe, K. Kawamoto, M. Okamoto, T. Bando

15.06.2020 | Ausgabe 6/2020

Joining Aluminum Alloy to Steel by Resistance Projection-Plug Welding

Kexu Ren, Ranfeng Qiu, Hengbo Ma, Hongxin Shi

23.06.2020 | Ausgabe 6/2020

Influence of Reflow Profile on Thermal Fatigue Behaviors of Solder Ball Joints

Eunice Y. Seo, Jong E. Ryu

18.06.2020 | Ausgabe 6/2020

Investigation of Microstructure, Mechanical Properties, and Numerical Modeling of Ti6Al4V Joints Produced by Friction Stir Spot Welding

F. A. García-Castillo, Luis A. Reyes, C. Garza, O. E. López-Botello, G. M. Hernández-Muñoz, P. Zambrano-Robledo

25.06.2020 | Ausgabe 6/2020

Experimental Investigation and Optimization of Wire Electrical Discharge Machining for Surface Characteristics and Corrosion Rate of Biodegradable Mg Alloy

Neeraj Ahuja, Uma Batra, Kamal Kumar

22.06.2020 | Ausgabe 6/2020

Microstructure, Tensile Properties and Fracture Behavior of Squeeze-Cast Mg Alloy AZ91 with Thick Cross Section

Yintian Fu, Yuxian Li, Anita Hu, Henry Hu, Xueyuan Nie

22.06.2020 | Ausgabe 6/2020

Microstructure Evolution and Microhardness Analysis of Metastable Beta Titanium Alloy Ti-15V-3Cr-3Al-3Sn Consolidated Using Equal-Channel Angular Pressing from Machining Chips

Q. Shi, Y. Y. Tse, R. L. Higginson

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.