Skip to main content
main-content

Zeitschrift

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 7/2011

Ausgabe 7/2011

Inhaltsverzeichnis ( 34 Artikel )

01.10.2011 | Ausgabe 7/2011

Computational Investigation of Hardness Evolution During Friction-Stir Welding of AA5083 and AA2139 Aluminum Alloys

M. Grujicic, G. Arakere, C.-F. Yen, B. A. Cheeseman

01.10.2011 | Ausgabe 7/2011

Study of the Temperature Variations of Al and Ti in Mechanical Alloying

D. Zidane, S. Bergheul, T. Rezoug, M. Hadji

01.10.2011 | Ausgabe 7/2011

Modeling the Evolution of Stresses Induced by Corrosion Damage in Metals

Ramana M. Pidaparti, Ronak R. Patel

01.10.2011 | Ausgabe 7/2011

Modeling of Electrical Discharge Machining Process Using Conventional Regression Analysis and Genetic Algorithms

Kuntal Maji, Dilip Kumar Pratihar

01.10.2011 | Ausgabe 7/2011

Neural and Neural Gray-Box Modeling for Entry Temperature Prediction in a Hot Strip Mill

José Angel Barrios, Miguel Torres-Alvarado, Alberto Cavazos, Luis Leduc

01.10.2011 | Ausgabe 7/2011

Carbon Transfer in Sodium System Under Thermal Cycling-Possibility of “Metal Dusting”

S. Rajendran Pillai

01.10.2011 | Ausgabe 7/2011

Multi-Length Scale Modeling of High-Pressure-Induced Phase Transformations in Soda-Lime Glass

M. Grujicic, W. C. Bell, P. S. Glomski, B. Pandurangan, B. A. Cheeseman, C. Fountzoulas, P. Patel

01.10.2011 | Ausgabe 7/2011

Synthesis of SnFe2O4 Nanomaterials Via High Energy Ball Milling of SnO (Stannous) and α-Fe2O3 (Hematite) Solid Precursors

Oswald N. C. Uwakweh, Rita Más, Carolyn Morales, Pedro Vargas, Josue Silva, Angel Rosa, Neshma Lopez, Richard Perez Moyet, Yenny Cardona

01.10.2011 | Ausgabe 7/2011

Effect of Hot Rolling Process on Microstructure and Properties of Low-Carbon Al-Killed Steels Produced Through TSCR Technology

S. K. Paul, U. Ahmed, G. M. Megahed

01.10.2011 | Ausgabe 7/2011

Effect of Stretch Orientation and Rolling Orientation on the Mechanical Properties of 2195 Al-Cu-Li Alloy

O. S. Es-Said, C. J. Parrish, C. A. Bradberry, J. Y. Hassoun, R. A. Parish, A. Nash, N. C. Smythe, K. N. Tran, T. Ruperto, E. W. Lee, D. Mitchell, C. Vinquist

01.10.2011 | Ausgabe 7/2011

Diffusion Boronizing of H11 Hot Work Tool Steel

Peter Jurči, Mária Hudáková

01.10.2011 | Ausgabe 7/2011

A Study on Factors Influencing Toughness of Basic Flux-Cored Weld of Modified 9Cr-1Mo Steel

B. Arivazhagan, M. Kamaraj

01.10.2011 | Ausgabe 7/2011

Influence of Superheat on Microstructure and Mechanical Properties of Ductile Cu47.5Zr47.5Al5 Bulk Metallic Glass-Matrix Composite

Alphons Anandaraj Antonysamy, Simon Pauly, Briji Kumar Dhindaw, Jurgen Eckert

01.10.2011 | Ausgabe 7/2011

Innovative Manufacturing Process for Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing

W. Miranda, G. Takiguchi, T. Shimabukuro, L. McLennan, C. Agajanian, L. Quintero, D. Mismar, J. Abdulla, C. Andrews, M. Hahn, E. Fodran, E. W. Lee, H. Garmestani, R. D. Conner, D. Brick, J. Ogren, O. S. Es-Said

01.10.2011 | Ausgabe 7/2011

Comparison of Accelerated Compressive Creep Behavior of Virgin HDPE Using Thermal and Energy Approaches

Amir Bozorg-Haddad, Magued Iskander

01.10.2011 | Ausgabe 7/2011

On the Distortion and Warpage of 7249 Aluminum Alloy After Quenching and Machining

N. Keleshian, R. Kyser, J. Rodriguez, C. Cueva, V. Vega, E. W. Lee, J. Ogren, O. S. Es-Said

01.10.2011 | Ausgabe 7/2011

Charge Weld Effects on High Cycle Fatigue Behavior of a Hollow Extruded AA6082 Profile

N. Nanninga, C. White, R. Dickson

01.10.2011 | Ausgabe 7/2011

Effect of Strain Rate on Cathodic Reaction During Stress Corrosion Cracking of X70 Pipeline Steel in a Near-Neutral pH Solution

Z. Y. Liu, X. G. Li, Y. F. Cheng

01.10.2011 | Ausgabe 7/2011

The Fatigue Behavior of Built-Up Welded Beams of Commercially Pure Titanium

Anil Patnaik, Narendra Poondla, Udaykar Bathini, T. S. Srivatsan

01.10.2011 | Ausgabe 7/2011

Microstructure Evolution of Semi-Solid 7075 Aluminum Alloy During Reheating Process

H. Mohammadi, M. Ketabchi, A. Kalaki

01.10.2011 | Ausgabe 7/2011

An Experimental Study of Heat Transfer During Forced Air Convection

Bowang Xiao, Gang Wang, Qigui Wang, Mohammed Maniruzzaman, Richard D. Sisson Jr., Yiming Rong

01.10.2011 | Ausgabe 7/2011

In Vitro Bioactivity of Surface-Modified β-Ti Alloy for Biomedical Applications

Y. Sasikumar, M. Karthega, N. Rajendran

01.10.2011 | Ausgabe 7/2011

Study on the Formability and Deformation Behavior of AZ31B Tube at Elevated Temperature by Tube Bulging Test

Zhubin He, Yanli Lin, Jia Wu, Shijian Yuan

01.10.2011 | Ausgabe 7/2011

Cyclic Oxidation Behavior of Simulated Post-Weld Heat-Treated P91

S. Rajendran Pillai, R. K. Dayal

01.10.2011 | Ausgabe 7/2011

A Simple Relationship Between Axial and Torsional Cyclic Parameters

Jing Li, Zhong-ping Zhang, Qiang Sun, Chun-wang Li, Rong-sui Li

01.10.2011 | Ausgabe 7/2011

Evaluation of the Low Heat Input Process for Weld Repair of Nickel-Base Superalloys

J. Durocher, N. L. Richards

01.10.2011 | Ausgabe 7/2011

Magnetic Properties and Nanocrystalline Phases in Sn Containing SmCo5 Alloys

Hamid Zaigham, F. Ahmad Khalid

01.10.2011 | Ausgabe 7/2011

Creep Constitutive Model and Component Lifetime Estimation: The Case of Niobium-Modified 9Cr-1Mo Steel Weldments

Gladius Lewis, Kevin M. Shaw

01.10.2011 | Ausgabe 7/2011

The Influence of the Preparation Conditions on Initial Permeability of Cu0.5Zn0.5Fe2−x R x O4

A. M. Samy

01.10.2011 | Ausgabe 7/2011

Preparation and Performance of Ordered Porous TiO2 Film Doped with Gd3+

Yi Zhou, Hong Li, DeHui Shi, CaiXia Lv, MingMing Dang, Wen Lou

01.10.2011 | Ausgabe 7/2011

A Modified Method to Estimate Fatigue Parameters of Wrought Aluminum Alloys

Jing Li, Zhong-ping Zhang, Qiang Sun, Chun-wang Li, Rong-sui Li

01.10.2011 | Ausgabe 7/2011

Characterization of Corrosion Product Layers from CO2 Corrosion of 13Cr Stainless Steel in Simulated Oilfield Solution

Z. F. Yin, X. Z. Wang, L. Liu, J. Q. Wu, Y. Q. Zhang

01.10.2011 | Ausgabe 7/2011

Optimal Weld Parameters, Weld Microstructure, Mechanical Properties, and Hydrogen Absorption: An Effective Analysis

J. Bhattacharya, T. K. Pal

01.10.2011 | Ausgabe 7/2011

Influence of Annealing Heat Treatment and Cr, Mg, and Ti Alloying on the Mechanical Properties of High-Silicon Cast Iron

D. B. V. Castro, L. S. Rossino, A. M. S. Malafaia, M. Angeloni, O. Maluf

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise