Ausgabe 7/2020
Inhalt (66 Artikel)
Smart Manufacturing Process of Carbon-Based Low-Dimensional Structures and Fiber-Reinforced Polymer Composites for Engineering Applications
V. K. Srivastava, Pramod Kumar Jain, Parshant Kumar, Alessandro Pegoretti, Chris R. Bowen
Advent of a Wide-Band-Gap Semiconducting Low-Density Material Possessing Significantly High Specific Hardness
Arvind Kumar Jaiswal, Barnali Maji, Jitamanyu Chakrabarty, Chandan Mondal, Joydeep Maity
Research on Microstructure and Fatigue Properties of Vibration-Assisted 5052 Aluminum Alloy Laser Welded Joints
Jiewen Jin, Qinghua Lu, Peilei Zhang, Chonggui Li, Hua Yan
Micro-characteristic of Strengthened Al0.1CoCrFeNi Alloy from Aluminum-Addition Friction Stir Processing
Hui-jie Zhang, Zi-jie Ji, Hui-jie Liu, Hao Zhang, Shao-hua Luo, Rui-bin Mei, Ying-ling Wang
Improved Edge Quality for AZ31 Sheets Using Online Heating Rolling Technique
Qiang Liu, Jiangfeng Song, Hua Zhao, Biquan Xiao, Xiaojian Zheng, Fusheng Pan
Comparison Study of Low-Heat-Input Wire Arc-Fabricated Nickel-Based Alloy by Cold Metal Transfer and Plasma Arc
Xiaohui Yin, Guoqiang He, Wei Meng, Zhenlin Xu, Lei Hu, Qunshuang Ma
Morphology Analysis and Characterization of Clinoptilolite/Polyvinylpyrrolidone-Zeolite Composite Nanofibers
Ehsan Assar, Amirhossein Meysami, Maryam Zare
Multipass Friction Stir Processing of Steel/SiC Nanocomposite: Assessment of Microstructure and Tribological Properties
Mostafa Fotoohi Nezhad Khales, Seyed Abdolkarim Sajjadi, Ata Kamyabi-Gol
Microstructure and Mechanical Properties of Copper–steel Laminated and Sandwich Joints Prepared by Electron Beam Welding
Song Debin, Wang Ting, Jiang Siyuan, Zhang Liang
Optimized Thermomechanical Processing for Fine-Grained Dual-Phase Microstructure Using Deformation-Induced Ferrite Transformation
S. K. Rajput, Yashwant Mehta, G. P. Chaudhari, S. K. Nath
Effect of Cooling Rate and Finish Rolling Temperature on Structure and Strength of API 5LX70 Linepipe Steel Plate
N. Amirjani, M. Ketabchi, M. Eskandari, M. Hizombor
Effect of Processing Method on the Recrystallization Behavior of Cold-Rolled AA3003 Aluminum Alloy
J. X. Zhang, H. Y. Sun, P. Du, W. C. Liu
A Study on the 2060-T8/2099-T83 Aluminum-Lithium Alloys T-Joints Welded by Double-Sided Laser Beam Welding
Jie Tan, Hongbing Liu, Peilei Zhang, Zhishui Yu, Haichuan Shi, Shaowei Li, Di Wu, Hua Yan, Xin Ye, Fuxin Wang, Xingru Wei, Qi Jiang, Jingyu Deng
Fatigue and Corrosion Behavior of Solid-State Recycled Aluminum Alloy EN AW 6082
Jure Krolo, Senka Gudić, Ladislav Vrsalović, Branimir Lela, Zvonimir Dadić
Comparative Study of Microstructure and Mechanical Properties of X80 SAW Welds Prepared Using Different Wires and Heat Inputs
Qiaoling Chu, Shuai Xu, Xiongwei Tong, Jie Li, Min Zhang, Fuxue Yan, Wanpeng Zhang, Zongyue Bi, Cheng Yan
Heat Sink Effect on 6061 Aluminum Alloy Welds with Different Partial Aging Conditions
C. M. Gómora, R. R. Ambriz, J. Zuno-Silva, D. Jaramillo
Formation of White Etching Layers by Deep Rolling of AISI 4140 Steel
Poliana S. Souza, Vinicius M. Cangussu, Marcelo A. Câmara, Alexandre M. Abrão, Berend Denkena, Bernd Breidenstein, Kolja Meyer
Synergistic Effect of Grain Size, β-Mg17Al12, and Texture on Mechanical Properties of Mg-15Al (wt.%) Magnesium Alloy Processed by Equal Channel Angular Pressing
Yongpeng Zhuang, Hongxia Wang, Hang Li, Liuwei Zheng, Junjian Li, Pengwen Zhou
The Effect of Quenching and Partitioning Heat Treatment on the Wear Resistance of Ductile Cast Iron
Zhi Wang, Baoxu Huang, Hui Chen, Changzheng Wang, Jie Ma, Xingchuan Zhao
Tailoring Soft Local Zones in Quenched Blanks of the Steel 22MnB5 by Partial Pre-cooling with Compressed Air
Oleksandr Golovko, Max-Henry Stolte, Kai Wölki, Sven Hübner, Bernd-Arno Behrens, Hans Jürgen Maier, Florian Nürnberger
On the Issue of Crack Formation in a Thin Dielectric Layer on Silicon under Thermal Shock
Arkadiy A. Skvortsov, Marina V. Koryachko, Pavel A. Skvortsov, Mikhail N. Luk’yanov
The Significance of Austenite/Ferrite/Martensite Ratio on Governing Impact Toughness of Fe-0.2C-6Mn-1.5Al Medium-Mn Transformation-Induced Plasticity Steel Studied by a Novel Heat Treatment
Zhichao Li, Yanjie Mou, Xinjing Li, Devesh Misra, Lianfang He, Huiping Li
Microstructures and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Processed by Two-Step Aging Treatment
Feng Wang, Yanli Gong, Yong Du, Min Song
Effect of Nano-zirconia on Microstructure and Biological Behavior of Hydroxyapatite-Based Bone Scaffolds
H. Maleki-Ghaleh, J. Khalil-Allafi, P. Keikhosravani, M. R. Etminanfar, Y. Behnamian
Morphological Development, Coarsening, and Oxidation Behavior of Ni-Al-Nb Superalloys
Mehmet Sahin Atas, Mehmet Yildirim
Effect of Cr and Mn Addition on the Microstructure, Texture, and Mechanical Properties of Ternary Low-Density Steels
Sudipta Pramanik, Satyam Suwas
Influence of Intercritical Quenching Temperature on Microstructure, Mechanical Properties and Corrosion Resistance of Dual-Phase Steel
Xuehui Hao, Xingchuan Zhao, Baoxu Huang, Hui Chen, Jie Ma, Changzheng Wang, Yuansheng Yang
Effect of Heterogeneous Lamellar Structure on Mechanical Properties and Electrochemical Corrosion Behavior of Al-Zn-Mg-Cu Alloy Subjected to High-Pressure Torsion
Kemin Xue, Biao Huang, Siliang Yan, Guangshan Wu, Ping Li
Superelastic Effect in NiTi Alloys Manufactured Using Electron Beam and Focused Laser Rapid Manufacturing Methods
Jan Dutkiewicz, Łukasz Rogal, Damian Kalita, Marek Węglowski, Sylwester Błacha, Katarzyna Berent, Tomasz Czeppe, Anna Antolak-Dudka, Tomasz Durejko, Tomasz Czujko
Dry Sliding-Friction and Wear Behavior of Hot-Extruded Al6061/Si3N4/Cf Hybrid Metal Matrix Composite
C. S. Ramesh, Saleem Khan, Zulfiqar A. Khan
In-plane Permeability and Mechanical Properties of R-Glass/Aramid Hybrid Composites
Amanda Albertin Xavier da Silva, Jeferson Avila Souza, Andrea Manes, Sandro Campos Amico
An Experimental Study of Rolled Friction-Stir-Welded Aluminum 6061-T6 Joints Subjected to Static and Fatigue Loading Conditions
S. Hassanifard, H. A. Reyhani, A. Nabavi-Kivi, A. Varvani-Farahani
A Study on the Corrosion Behavior of 7072/3004/7072 Clad Aluminum Alloy in Different Media
I. Tunc, B. D. Karahan, O. Keles
Influence of Warm Predeformation Temperature on the Corrosion Property of Type 304 Austenitic Stainless Steel
Huimin Tao, Chengshuang Zhou, Yuanjian Hong, Yuanyuan Zheng, Kaiyu Zhang, Jinyang Zheng, Lin Zhang
Friction and Reciprocating Wear Behavior of Borided AISI H13 Steel Under Dry and Lubricated Conditions
R. C. Morón, I. Hernández-Onofre, A. D. Contla-Pacheco, D. Bravo-Bárcenas, I. Campos-Silva
Effects of Ge on Microstructure, Spreadability, and Mechanical Properties of the Sn-32Pb-18Cd Solder Alloy
Kangli Li, Jian Lin, Tongju Wang, Yongping Lei, Hanguang Fu
Investigation of Crystallization and Mechanical Characteristics of Glass and Glass-Ceramic with the Compositions xFe2O3-35SiO2-35B2O3-10Al2O3-(20−x) Na2O
Kh. S. Shaaban, El Sayed Yousef, E. A. Abdel Wahab, E. R. Shaaban, Safwat A. Mahmoud
Metal Injection Molded Titanium: Mechanical Properties of Debinded Powder and Sintered Metal
Suparat Bootchai, Nipon Taweejun, Anchalee Manonukul, Chaosuan Kanchanomai
Biotemplate Synthesis of Zinc Sulfide Spheres with High Photocatalytic Performance on Organic Dyes
Wenjun Li, Xinpeng He, Kaiyao Xin, Xiangfei He, Hua Lin, Lizhao Qin, Qing Li
Evaluating and Locating Plasticity Damage Using Collinear Mixing Waves
Bo Yuan, Guoshuang Shui, Yue-Sheng Wang
Synthesis and Fabrication of Y-Doped ZnO Nanoparticles and Their Application as a Gas Sensor for the Detection of Ammonia
Vinayak Adimule, M. G. Revaigh, H. J. Adarsha
Behavior of TA6V Alloy at High Temperature in Air Plasma Conditions: Part 1—Oxidation
Marianne Balat-Pichelin, Barka Lucile
Behavior of TA6V Alloy at High Temperature in Air Plasma Conditions: Part 2—Thermal Diffusivity and Emissivity
M. Balat-Pichelin, J. Annaloro, L. Barka, J. L. Sans
Characterization of Ground Steel Using Nondestructive Magnetic Barkhausen Noise Technique
Ashish Srivastava, Akash Awale, Meghanshu Vashista, M. Z. Khan Yusufzai
Nano- and Microhardness Distribution in the Carburized Case of Nb-Microalloyed Gear Steel
W. Chen, X. F. He, W. C. Yu, J. Shi, M. Q. Wang, K. F. Yao
Computational Study of Fatigue in Sub-grain Microstructure of Additively Manufactured Alloys
Mohamad Ghodrati, Reza Mirzaeifar
An Integrated Analysis Method of Service Life Based on the 3D Heterogeneous Material Model with Casting Defects
Kai You, Lei Rao, Xue Bai, Tianyu Miao
Study on Gas Bulging Forming and Contradictive Cooling Bonding of AZ31/Al7475 Bimetal Composite Tube
Liqiang Zhan, Gang Wang, Jianlei Yang, Dehong Kong, Wencong Zhang, Guofeng Wang
Numerical Simulation of Cu-Al-Mn Endodontic Instruments under Bending and Torsional Conditions
N. Babacan, M. Caliskan, F. Alay, N. Pehlivanli
High Temperature Deformation Behavior and Constitutive Modeling for Flow Behavior of Alloy 718
Rajesh Jarugula, U. Aravind, Bhagwan Singh Meena, Subramanian Ganesh Sundara Raman
The Influence of Loading Paths on Mechanical Behavior and Microstructure of Mn18Cr18N Austenitic Stainless Steel
Wenwu He, Fei Li, Huayu Zhang, Huiqin Chen
Cruciform Specimen Machining Using EDM and a New Design Verification for Biaxial Testing
Abhishek Raj, Pundan Kumar Singh, Rahul Kumar Verma, K. Narasimhan
Effect of Solution Temperature on the Corrosion Behavior of 6061-T6 Aluminum Alloy in NaCl Solution
M. Zhu, B. Z. Zhao, Y. F. Yuan, S. Y. Guo, J. Pan
Effects of Location on the Microstructure and Mechanical Properties of Cu-8Al-2Ni-2Fe-2Mn Alloy Produced Through Wire Arc Additive Manufacturing
Wei Chen, Yuhua Chen, Timing Zhang, Taotao Wen, Xiaosong Feng, Limeng Yin
The Joint Properties of A564-630 Stainless Steel Made by Transient Liquid Phase Bonding: Microstructural and Mechanical Strength Evaluation
Mohammad J. Moradi, Esmaeil Emadoddin, Hamid Omidvar
Modeling of Metadynamic Recrystallization Kinetics and Recrystallization Mechanisms of V-Containing 12Cr Rotor Steel
Yue Xu, Yongxing Jiao, Jiansheng Liu
Experimental Determination and Theoretical Prediction of Limiting Strains for ASS 316L at Hot Forming Conditions
Baloji Dharavath, Ayush Morchhale, Swadesh Kumar Singh, Nitin Kotkunde, M. T. Naik
A New Modified Theta Projection Model for Creep Property at High Temperature
Hui Liu, Fan Peng, Yuping Zhang, Yiran Li, Kang An, Yanqing Yang, Yunxia Zhang, Xiqiang Guan, Wujun Zhu
Effect of Relative Humidity on the Tribological Performance of Pure Sliding Contacts Lubricated with Phosphorus Additive Containing Lubricants
Hui Cen, Dan Bai, Yanpu Chao, Yaohui Li
Axial Compressive Properties of Carbon/Glass Thermoplastic Epoxy Hybrid Composite Rods
Kimiyoshi Naito, Chiemi Nagai
Hot Deformation Behavior of Hydrogenated 0.21 wt.%H Ti-0.3Mo-0.8Ni Alloy Welded Joints
Quanming Liu, Weimin Long, Li Fu, Sujuan Zhong, Luyi Wang
Reaction Behavior, Microstructure, and Radiative Properties of In Situ ZrB2-SiC Ceramic Composites from a Si-Zr-B4C System
Yong Li, Xiao Yang, Wei Wang, Yixiang Chen, Jiangtao Li