Ausgabe 7/2026
Inhalt (75 Artikel)
Progress on Biomimetic Preparation and the Damping Mechanism of Copper Matrix Composites
- Review
Jun He, Xiaosong Jiang, Hongliang Sun, Rui Shu, Zixuan Wu, Liu Yang
Research on Numerical Simulation of Ultrasonic-Assisted Laser–MIG Hybrid Welding of TC4 Titanium Alloy
- Original Research Article
Yongxin Lu, Pengjun Wen, Dafeng Wang, Xiaoyong Zhang, Shiqing Wang, Wei Qiang
Elucidating Enhancement of the Properties of Nanostructured Cu-Ni Alloy Thin Film for Marine Structures by Molecular Dynamics Simulations and Pulsed Electrodeposition
- Original Research Article
Hrishikesh Kumar, Satadipa Banerjee, Manoj Warrier, Aaditya Majalee, Pakanati Siva Prasad, Pritam Sadhukhan, Ajay Kumar Mishra, K. S. Ghosh, S. Pramanik, M. M. Ghosh
Correction: Elucidating Enhancement of the Properties of Nanostructured Cu-Ni Alloy Thin Film for Marine Structures by Molecular Dynamics Simulations and Pulsed Electrodeposition
- Correction
Hrishikesh Kumar, Satadipa Banerjee, Manoj Warrier, Aaditya Majalee, Pakanati Siva Prasad, Pritam Sadhukhan, Ajay Kumar Mishra, K. S. Ghosh, S. Pramanik, M. M. Ghosh
Comparative Analysis of Deep Learning Models for Surface Roughness Prediction in Additively Manufactured Honeycomb Lattices
- Original Research Article
B. Veera Siva Reddy, C. Chandrasekhara Sastry, J. Krishnaiah, A. Hafeezur Rahman, S. Surya Kumar
Innovative Material Fabricated by Additive Manufacturing: Fracture Toughness Correlation through Experiment and Simulation
- Original Research Article
Dhinakaran Veeman, Pechimuthu Arumugaperumal, Sanjay Kannan, Mohan Kumar Subramaniyan
GH4169 Simulates the Degree of Recrystallization and Grain Growth Model of Different Annealing Processes
- Original Research Article
Shengxuan Zhao, Zhicheng Cheng, Wei Yu
Time-Dependent Springback Behavior and Model of Cu-Fe-P Copper Alloy under Severe Plastic Compressive Deformation
- Original Research Article
Hongli Hou, Yifan Wu, Ziyan Hao, Shengnan Zhang, Pengfei Wang, Jialin Jia, Jianfeng Li, Huiping Li, Yang Gao
Effect of Laser Welding Process on Microstructure and Properties of Submicron-Grained 304 Stainless Steel Welded Joints
- Original Research Article
Jingtao Yue, Hongyan Wu, Linxiu Du, Xiuhua Gao
Effect of the Plunge Depth on Fatigue of 2B06/7B04 Dissimilar Al Alloy RFSSW Joints
- Original Research Article
Da Zhang, Zhiwei Jia, Jiangtao Xiong, Fangyuan Jiang, Jinglong Li, Wei Guo
Hydrogen Capture and Embrittlement Behavior of Nb-Ti Microalloyed High-Strength Steel for Marine Flexible Risers
- Original Research Article
Tingfeng Xu, Yang Yang, Shuai Yu, Xingyu Wang, Dazheng Zhang, Cui Chen, Weijuan Li
Effect of Re-crystallization Annealing on the Fracture Toughness of ϕ 400 mm Ti6Al4V Alloy Hemispherical Closed Die Forged Domes for Gas Bottle Applications
- Original Research Article
P. Manikandan, V. Anil Kumar, M. S. Dhanya, Lagudu Yerrinaidu, G. Sudarshan Rao, A. Venugopal, Rohit Kumar Gupta, Satish Kumar Singh, Govind
Environmental Impact Assessment of FDM-Fabricated Ankle Foot Orthosis Device Using Thermoplastic Materials
- Original Research Article
Osman Ulkir, Melih Kuncan
pH-Responsive Coating with Multiple Self-healing Cycles Using T-mSiO2 Loaded Sodium Phytate and Grafted Chitosan-PEG
- Original Research Article
Liying Song, Jiankai Zhang, Yuxuan Bai, Haoran Zhang, Runyuan Liu, Menglong Zhang, Tangsen Yuan, Hao Shi, Fubin Ma
Evolution Law of Plastic Damage in Circumferential Welded Joints of X80 Pipeline Steel
- Original Research Article
Liu Wenhui, Wang Sen, Gou Jianjun, Sun Xueqi, Fan Lifeng
Correction: Evolution Law of Plastic Damage in Circumferential Welded Joints of X80 Pipeline Steel
- Correction
Wenhui Liu, Sen Wang, Jianjun Gou, Xueqi Sun, Lifeng Fan
High-Efficiency Integrated Corrosion and Scale Inhibitor for Carbon Steel in CO2-Containing Formation Water: Experimental and Theoretical Studies
- Original Research Article
Zhengrong Ye, Haiwei Lu, Xiang Zhou, Tong Peng, Xiang Liu, Xiaodong Cui, Ran Yi, Guoan Zhang
Microstructure and Mechanical Behavior of Low-Carbon Microalloyed Steel with a Mixed Gradient Structure
- Original Research Article
Yang Guiling, Jia Zhiyao, Ren Yunfei, Zheng Chengsi, Zhang Mingya, Sun Ji, Liu Dongming
Transition of Wear Mechanisms on the Elevated-Temperature Wear of a New Hot-Work Die Steel
- Original Research Article
Zhen Wang, Shuang Li, WeiYong Li, Junzhe Wang, Jingqi Hu, Ziqi Lu
Oxide Scale Evolution on Al- and AlCr- Slurry-Coated Deformable Austempered Ductile Iron After Long-Term Exposure at 650 and 700 °C
- Original Research Article
Olga Tsurtsumia, Lili Nadaraia, Levan Khundadze, Elguja Kutelia, Tengiz Kukava
Parametric Optimization in Fused Deposition Modeling for Mechanical Reinforcement of Polylactic Acid, Acrylonitrile Butadiene Styrene, and Nylon Carbon Fiber Materials
- Original Research Article
Tanusree Bera, Smita Mohanty
Microstructural Observations of X70 Pipeline Steels Evaluated by Hydrogen Permeation and Drop Weight Tear Tests to Propose a Statistically Based, Cost-Effective Model
- Original Research Article
Reza Khatibzadeh Davani, Ehsan Entezari, Jerzy A. Szpunar
Unraveling the Role of Copper on the Corrosion Behavior of Fe-20Cr-xCu Alloys in 3.5% NaCl Solution
- Original Research Article
Yahya Ahmed, A. Madhan Kumar, Muhammad Younas, Ihsan-ul-Haq Toor
The Effect of Root Face Thickness on Microstructure Evolution and Tensile Properties of Laser-Arc Hybrid Welded Thick 12Cr13 Martensitic Stainless Steel
- Original Research Article
Yu Fu, Lianyong Xu, Kangda Hao, Yao Shi, Qian Li, Haicun Zhang, Yongdian Han, Lei Zhao, Wenjing Ren
Microstructural Evolution and Fracture Mechanisms of After-Service P92 Welded Joints in Ultra-Supercritical Units
- Original Research Article
Qingfeng Wang, Hao Zhou, Lei Zhao, Xin Chen, Shuai Liu, Haifeng Jiang, Kang Shen, Derui Guo
Influence of Process Parameters on the Forming Quality of Hollow Shafts with Equal-Wall-Thickness by Three-Roll Skew Rolling
- Original Research Article
Song Zhang, Xuedao Shu, Zbigniew Pater, Janusz Tomczak, Tomasz Bulzak
High-Performance Alloy Design of 10Cr Ferrite Steel: An Integrated Approach of Single-Objective Optimization and Machine Learning
- Original Research Article
Gaolei Xu, Longlong Shen, Chengfeng Wang, Yanfu Chai, Zubin Chen, Qing Guo, Xukai Ren, Zhiyu Chang, Gang Zhu, Qinghang Wang
Effect of Processing on Electrical Characteristics of Graphene-Modified PU Foam-Epoxy Composites
- Original Research Article
Monika Chaparia, Shaily Bhargava, Anil Dhawan, Umesh Kumar Dwivedi
A New Forming Method of Titanium Bipolar Plate for PEMFC: Multi-step Rolling Forming
- Original Research Article
Jie Zhang, Zhiqiang Chen, Han Zhang, Yun Zeng, Te Hu, Jinrong Tang
Wear Behavior of Cryogenically Treated TiAlN, TiAlN/TiN, and TiAlN/AlCrN Coated Tools during End Milling of XH67MBTHO
- Original Research Article
Jayaram C. Sasi, Jose Mathew
Effect of Welding Speed on the Droplet Transfer in High-Power Laser-MAG Hybrid Welding of 12-mm-Thickness Steel Plates for Shipbuilding
- Original Research Article
Zufa Li, Liyun Xu, Junbo Feng, Caicai Zhao, Gang Shang, Hanwu He, Lingxiao Song, Peilei Zhang
Deformation Behavior, Microstructure, and Mechanical Properties of T-Shaped Tube during Rolling Hydroforming
- Original Research Article
Mingtao Chen, Xiaoting Xiao, Hui Long, Yunya Xiao
Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy Prepared by Electric-Pulse-Assisted Hot Form and Quench Process
- Original Research Article
Junyan Yang, Xinglei Zhang, Lincai Zhang, Hongjie Fang, Shihui You, Haibo Liu
Enhanced Machinability of Additively Manufactured Copper with Diamond-Like Carbon (DLC)-Coated Tools: An Experimental Investigation
- Original Research Article
R. Raj Mohan, K. Hareharen, Javvadi Eswara Manikanta, S. Navaneetha Krishnan, B. Sakthivel, Babu Narayanan
Investigation of Material Composition on the Hydrolysis Property of Al-Based Composites
- Original Research Article
Xu Guan, Caihong Wu, Jian Li, Shuai Yang, Shuxia Sun, Chunfang Wu, Qi Cui, Sihang Yan, Ping Luo, Shijie Dong
A Novel Approach of Chemical Mechanical Jet Polishing for Interior Surface of Aerospace Micro-bearing Outer Rings
- Original Research Article
Fanning Meng, Yulong Dai, Chunjing Shi, Chun Cao, Ying Yang, Zeqiang Li
Effect of Laser Remelting on Microstructure and Properties of Magnetron Sputtered TiN Coatings
- Original Research Article
Xin Ma, Qiang Shi, Yong Huang, Yanzhong Chen, Qiang Li, Ping Xiao
Electroplated Ni-S Amorphous Coating as Novel Polishing Layer on Aluminum Mirror
- Original Research Article
Tong Zhou, Xinyu Yan, Xuan Li, Fei Sun, Kaining Zhang, Fei Long, Lei Liu
Effect of Synergistic Interaction of Al and Nb on the Microstructure and Properties of Laser-Cladded CoCrFeMnNi High-Entropy Alloy Coatings
- Original Research Article
Shenhao Wang, Chuanwei Shi, Lingchen Kong, Xuan Hao, Zhiheng Zhu, Fengyuan Guo, Yushuang Huo, Qian Su
Development of a Multiphysics Computational Modeling and Experimental Framework for Friction Stir Welding of Similar Aluminum Alloys Using Different Pin Profiles
- Original Research Article
Rahul Kesharwani, Rajnish Mishra, Kishor Kumar Jha, Murshid Imam, Chiranjit Sarkar
Effect of Variable-Speed Non-isothermal Cooling Aging on Mechanical and Corrosion Properties of Al-Cu-Mg Alloys
- Original Research Article
Jia Lang, Ling Shi, Ruiming Su, Tongyu Liu, Guanglong Li
Effect of Two-Stage Aging Heat Treatment on the Properties of NiTi Alloy for Transcatheter Aortic Valve Stents
- Original Research Article
Zipeng Wang, Zherong Huang, Kaikun Wang, Jianye Zhou
Effect of Bainitic Transformation during Bainite Quenching and Tempering (BQT) on the Tensile Properties of 51CrMnV Spring Steel
- Original Research Article
Shaojie Zheng, Peng Qi, Simon Yisheng Feng, Jie Zhao, Jiaxin Mu, Wenle Zhang, Yunshan Zhang, Lei Yin, Rongfu Xu
Influence of Isochronal and Isothermal Annealing on Microstructure and Hardness of Nanocrystalline CoCrFeNi-B4C High Entropy Alloy Composites
- Original Research Article
Recep C. Koç, Gökhan Polat, Ahmet B. Batıbay, Hasan Kotan
Effect of Heat Treatment on Mechanical and Corrosion Behavior of Aluminum Alloy-Reinforced Intermetallic Carbides
- Original Research Article
Keerthipalli Trinath, Radhamanohar Aepuru, Unissa Nichul, Vijay Hiwarkar, Mechiri Sandeep Kumar, M. D. Barath Kumar, S. Sathiyamurthy
Study on Induction Heating Characteristics of Spiral Bevel Gear Excited by Selective Laser Melting Coil
- Original Research Article
Yu-qian Zhao, Xiao-hui Pei, Yao-long Ouyang, Zhu-ge Shao, Yi Han
Electrochemical Characteristics of Na-Doped TiO2 Nanostructures Blended with Their Photocatalytic and Antibacterial Activity under Solar Light
- Original Research Article
Zohra Nazir Kayani, Hina Naqvi, Zainab Bashir, Maryam Anwar, Saira Riaz, Shahzad Naseem
Evaluation of Impact Wear Behavior and Damage Mechanisms of CrN and TiN Coatings on Titanium Alloy Substrates
- Original Research Article
Chenglong Mou, Xiaodong He, Zhengyu Liu, Guangan Zhang, Lunlin Shang, Xueqian Cao
Effects of Sintering Temperature and Composition on the Microstructure and Properties of Al2O3-GdAlO3 Multiphase Ceramics via Reactive Pressureless Sintering
- Original Research Article
Yulong Wu, Boxin Wei, Sijia Huo, Lei Chen, Yujin Wang
Effect of Ultrasonic Frequency Pulse Current on Underwater Wet Flux-Cored Arc Welding Process of Low Carbon Steel
- Original Research Article
Lijian Wu, Ji Chen, Zhen Wen, Hao Su, Chuansong Wu
Variation of Low Cycle Fatigue Life in TA5 Alloy as a Function of Different Cyclic Deformation Mechanisms
- Original Research Article
M. Ye, Y. K. Wu, Y. F. Lv, C. Xin, Q. Wang
Microstructure and Properties of Y2O3 Reinforced CoCrFeNiMn High-Entropy Alloy Fabricated by Powder Plasma Arc and Laser Metal Deposition Additive Manufacturing
- Original Research Article
Junjie Tan, Kang Peng, Xizhang Chen, Min Chen, Zhijun Tong, Xinwei Mao
Investigating the Physical Parameters, Optical Properties, Mechanical Features, and Ionizing Shielding Efficiency of Germanate-Tellurite-Borate Glass-Doped Praseodymium Oxide
- Original Research Article
K. A. Mahmoud, M. H. A. Mhareb, Rahman I. Mahdi, M. I. Sayyed, Abed Jawad Kadhim, Kawa M. Kaky
The Formation Mechanism and Corrosion Resistance of Composite Cerium Conversion Film on PbSb Alloy
- Original Research Article
Jun Chen, Lingxiang Hu, Tingting Jiang, Sude Ma
The Influence of Ti and Mn Content on the Microstructure and Properties of Automotive Steel Sheet
- Original Research Article
Pengbo Duan, Huijuan Wang, Sheng Yin, Qingchao Tian
Multi-scale Mechanical Characterization of Aluminum Matrix Hybrid Composites: Correlating Nano- and Micro-indentation Responses
- Original Research Article
Jamuna Sethi, Siddhartha Das, Karabi Das
The Role of Ni Interlayer in the Microstructural Properties of Dissimilar Ultrasonic-Assisted Al/Mg Alloy Friction Stir Welds
- Original Research Article
Junjie Zhao, Fuhui Yang, Najib Ahmad Muhammad, Chuansong Wu
Microstructure and Mechanical Properties of Copper Metal Matrix Composites Reinforced with Hybrid Ceramic and Fuse Holder Scrap
- Original Research Article
R. Raja, Sabitha Jannet, D. S. Ebenezer Jacob Dhas, K. Sumanth Ratna
Hierarchical Perovskite PbTiO3-Ag2O Microplate Composites for Efficient Photocatalytic Degradation of RhB Under Solar Light Irradiation
- Original Research Article
Yuanchun Li, Chenshuo Ye, Shun Liu, Yong Fu, Enrong Zhang, Simin Yin
Effects of Multi-field Synergistic Surface Modification on Fatigue Damage and Nanoscale Precipitation Mechanisms of 7075 Aluminum Alloy
- Original Research Article
Xiujie Yue, Youqiang Wang, Ping Zhang
Electromechanical Behavior and Fracture Energy of High-Performance Fiber-Reinforced Concrete under Cyclic Bending
- Original Research Article
Tan-Duy Phan, Manh-Tuan Nguyen, Ngoc-Thanh Tran, Kien Le-Trung, Duy-Liem Nguyen
Non-Destructive Monitoring of the Effect of Artificial Aging on API X65 Pipeline Welded Joints
- Original Research Article
V. Conejo, H. Carreón, A. Ruiz
Single-Particle Ultrasonic-Assisted Scratching of Tungsten Alloys at High Strain Rates
- Original Research Article
Chong Li, Zhiqiang Wang, Gang Jin, Zhanjie Li, Xin Zhang, Shaokun Luo, Yipu Bian
Formulation and Printability of SiC-Reinforced UV-Curable Resins for Additive Manufacturing
- Original Research Article
Babak Houshmand, Seyed Mohsen Safavi, Ali Mogharehabed
Hydrothermal-Assisted Electrophoretic Deposition for Preparing Eu-Doped VO2 Films and Characterization of the Thermochromic and Mechanical Properties
- Original Research Article
Jinjing Du, Ruitong Zhai, Haiyang Lin, Jingtian Liu, Xun Liu, Bin Wang, Dongbo Wang, Jun Zhu, Heng Zuo, Qian Li, Xihong He
Effect of Powder Reuse on Powder Properties and Mechanical Properties of GH3536 Alloy during Laser Powder Bed Fusion
- Original Research Article
Yao Wang, Shouzhen Zhou, Junchao Zheng, Xiaona Ren, Xinggang Li, Fengyu Lv, Weifeng Qi, Wenchang Wang, Wenxing Huo, Zhipei Chen, Changchun Ge
On Phase Stability and Strength Stability of Kinetically Heat-Treated Novel Sm-Doped Nickel-Based Superalloy
- Original Research Article
Giridhar Gudivada, Ajoy Kumar Pandey
Effect of Si Doping and Layer Embedding on the Microstructure and Properties of AlTiN-Based Coatings
- Original Research Article
Xunwang Shi, Yiman Zhao, Xue Gao, Derong Zhu, Bin Li, Wenling Xie, Jingchuan Li, Yiming Wang, Shaoshuai Hou, Yuhang You
Investigating the Anti-coking Behavior of Aluminide Coatings Applied on HP-Nb Steel Substrates Using Pack-Cementation Method
- Original Research Article
Masoud Rafiee, Ali Shafyei, Abbas Bahrami
Development of Mechanically Alloyed and Conventionally Sintered Porous Ni-Cr-Fe Alloys
- Original Research Article
M. Akhil, A. Patra
Investigation of Capacity Fading Phenomenon in LiNi0.885Co0.1Al0.015O2 Cathode Batteries at High-Rate Cycling
- Original Research Article
Jixuan Lu, Wanzheng Lu, Jiayi Yuan, Peian Li, Ruiting Xu, Qianqian Wang
Process Optimization and Mechanical Characterization of SiC-Reinforced Friction Stir Welded AZ91D/AA6061-T6 Joints Using Response Surface Methodology
- Original Research Article
Shwetanshu Gaurav, Mohammad Zunaid, Radhey Shyam Mishra
Corrosion Characterization of Ti-6Al-4V Alloy After Constrained Groove Pressing and TiO2 Coating
- Original Research Article
Ismail Bencherifa, Ilyas Belkhettab, Abdelmounaim Chetoui, Khaled Derkaoui, Oussama Dabou, Slimane Latreche, Billel Hamdoud
High Temperature Deformation Mechanisms in Laser Melting Deposition TA15 Alloy under In-situ SEM Tensile Testing
- Original Research Article
Mahnoor Boukhari, Junxia Lu, Muhammad Rizwan, Xiaopeng Cheng, Haibin Li
Study on the Microstructure and Electrochemical Corrosion Properties of AlCrCuFeNiTix High-Entropy Alloy
- Original Research Article
Cheng Xu, Yu Yang, Jifu Zhang, Runqi Wang
