Skip to main content


Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 8/2018

Ausgabe 8/2018

Inhaltsverzeichnis ( 58 Artikel )

29.06.2018 | Ausgabe 8/2018

Low Solution Temperature Heat Treatment of AlSi9Cu3(Fe) High-Pressure Die-Casting Actual Automotive Components

Silvia Cecchel, Andrea Panvini, Giovanna Cornacchia

02.07.2018 | Ausgabe 8/2018

Optimization of Process Parameters for the Axial Distortion and Distortion Range During Die Quenching of a Spiral Bevel Gear

Yingtao Zhang, Gang Wang, Wankai Shi, Lin Yang, Zhichao Li

11.04.2018 | Ausgabe 8/2018

A Study of Tensile Flow and Work-Hardening Behavior of Alloy 617

Aditya Narayan Singh, A. Moitra, Pragna Bhaskar, Arup Dasgupta, G. Sasikala, A. K. Bhaduri

17.07.2018 | Ausgabe 8/2018

Effect of Overaging on Fatigue Crack Propagation and Stress Corrosion Cracking Behaviors of an Al-Zn-Mg-Cu Alloy Thick Plate

Lianghua Lin, Zhiyi Liu, Xiangnan Han, Wenjuan Liu

05.07.2018 | Ausgabe 8/2018

Experimental Assessment of High Heating Rates in Induction Heating with Temperature-Sensitive Lacquers

N. Vanderesse, B. Larregain, F. Bridier, P. Bocher

05.07.2018 | Ausgabe 8/2018

A Review on Micro- and Nanoscratching/Tribology at High Temperatures: Instrumentation and Experimentation

Saeed Zare Chavoshi, Shuozhi Xu

15.06.2018 | Ausgabe 8/2018

Effect of the Heat Treatment on the Corrosion Resistance of Duplex Stainless Steels

Luca Pezzato, Mattia Lago, Katya Brunelli, Marco Breda, Irene Calliari

20.07.2018 | Ausgabe 8/2018

Microstructures and Properties of Nanostructured TiN/MoS2/Ag Composite Film Prepared by Pulsed Laser Deposition

Hongjian Guo, Bo Li, Minmin Han, Wenyuan Chen, Zhenyu Zhang, Junhong Jia

14.05.2018 | Ausgabe 8/2018

High Chromium Cast Irons: Destabilized-Subcritical Secondary Carbide Precipitation and Its Effect on Hardness and Wear Properties

María Agustina Guitar, Sebastián Suárez, Orlando Prat, Martín Duarte Guigou, Valentina Gari, Gastón Pereira, Frank Mücklich

15.06.2018 | Ausgabe 8/2018

Multipass Scratch Behavior of Borided and Nitrided H13 Steel

R. C. Vega-Morón, G. A. Rodríguez-Castro, L. F. Jiménez-Tinoco, A. Meneses-Amador, J. V. Méndez-Méndez, J. Escobar-Hernández, C. D. Reséndiz-Calderón, J. L. Nava-Sánchez

18.06.2018 | Ausgabe 8/2018

The Ablation and Oxidation Behaviors of SiC Coatings on Graphite Prepared by Slurry Sintering and Pack Cementation

Reza Aliasgarian, Malek Naderi, Seyyed Ehsan Mirsalehi, Saeed Safi

29.06.2018 | Ausgabe 8/2018

Correlation Between the Pitting Potential Evolution and Phase Precipitation Kinetics in the 2205 Duplex Stainless Steel

Mustapha Djama, Djaffar Saidi, Abdelaziz Kadri, Nabil Kherrouba, Brahim Mehdi, Stéphane Mathieu, Thierry Schweitzer, Idir Brahim

05.07.2018 | Ausgabe 8/2018

Replacement of Nitrided 33CrMoV Steel with ESR Hot Work Tool Steels for Motorsport Applications: Microstructural and Fatigue Characterization

Lorella Ceschini, Andrea Morri, Alessandro Morri, Simone Messieri

03.07.2018 | Ausgabe 8/2018

Cryorolling-Induced Texture, Mechanical Properties and Fracture Behavior of Al-Mg-Si Alloys During Cold Deformation

Xianwei Ren, Yuanchun Huang, Yu Liu

03.07.2018 | Ausgabe 8/2018 Open Access

Structural and Mechanical Properties of Zr-Si-N Coatings Deposited by Arc Evaporation at Different Substrate Bias Voltages

B. Warcholinski, T. A. Kuznetsova, A. Gilewicz, T. I. Zubar, V. A. Lapitskaya, S. A. Chizhik, A. I. Komarov, V. I. Komarova, A. S. Kuprin, V. D. Ovcharenko, V. S. Goltvyanytsya

29.06.2018 | Ausgabe 8/2018

Superhydrophobic Surface of AZ31 Alloy Fabricated by Chemical Treatment in the NiSO4 Solution

M. Yeganeh, M. Omidi, M. Eskandari

05.07.2018 | Ausgabe 8/2018

Alternative Chromium-Free Passivation Combined with Nano-electrodeposition for Electrogalvanized Steel

Qingyang Li, Fenghuan Li, Maozhong An

18.07.2018 | Ausgabe 8/2018

Fracture Strength and Surface Magnetic Flux Uniformity in an Isotropic Polymer-Bonded Ring-Shaped Nd-Fe-B Magnet

N. Farzam Mehr, S. Behrangi, M. Ahmadi, A. Kianvash

17.07.2018 | Ausgabe 8/2018

Effects of Rolling Temperature on the Microstructure and Properties of 2Cr13/316L/9Cr18MoV Stainless Steel Composite Plate Fabricated by Hot-Rolling Bonding Process

Penglin Zhang, Xiaokang Zhao, Bo Yang, Xiaobo Zhang, Rui Cao

12.07.2018 | Ausgabe 8/2018

A Study on Thermal Conductivity and Stability of Nanofluids Containing Chemically Synthesized Nanoparticles for Advanced Thermal Applications

Sujoy Das, Krishnan Bandyopadhyay, M. M. Ghosh

16.07.2018 | Ausgabe 8/2018

Toward a Biocompatible and Degradable Battery Using a Mg-Zn-Zr Alloy with β-Tricalcium Phosphate Nanocoating as Anode

Jiaoyang Xia, Zhihao Yuan, Fengshi Cai

16.07.2018 | Ausgabe 8/2018

Corrosion and Mechanical Degradation of Ni-Ti Superelastic Alloy in Neutral Fluoride Solution

Toshio Ogawa, Hirokaze Takada, Kuniaki Maruoka

16.07.2018 | Ausgabe 8/2018

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Ying Cheng, Yanxiang Li, Xiang Chen, Xu Zhou, Ningzhen Wang

28.03.2018 | Ausgabe 8/2018

Mechanical Properties and Microstructure of High-Strength Steel Controlled by Hot Stamping Process

Hang Ou, Xu Zhang, Junrui Xu, Guangyao Li, Junjia Cui

03.07.2018 | Ausgabe 8/2018

Influence of Welding Combined Plastic Forming on Microstructure Stability and Mechanical Properties of Friction Stir-Welded Al-Cu Alloy

Z. L. Hu, M. L. Dai, Q. Pang

03.07.2018 | Ausgabe 8/2018

Investigation on Target Erosion and Effect of Deposition Rate on Microstructure and Properties of Sputtered Be Coating

Bingchi Luo, Jiqiang Zhang, Wenqi Li, Kai Li, Xuemin Wang, Weidong Wu

23.07.2018 | Ausgabe 8/2018

Process Parameter Optimization in Refill Friction Spot Welding of 6061 Aluminum Alloys Using Response Surface Methodology

L. Zhou, L. Y. Luo, R. Wang, J. B. Zhang, Y. X. Huang, X. G. Song

17.07.2018 | Ausgabe 8/2018 Open Access

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Haider Ali, Hassan Ghadbeigi, Kamran Mumtaz

06.07.2018 | Ausgabe 8/2018

Microstructure and Wear Resistance of FeCrBSi Plasma-Sprayed Coating Remelted by Gas Tungsten Arc Welding Process

Dong Tianshun, Zheng Xiaodong, Li Yalong, Li Guolu, Zhou Xiukai, Wang Haidou

03.07.2018 | Ausgabe 8/2018

Development and Characterization of a Novel Ti-Modified High-Si Medium-Mn Steel Possessing Ultra-High Strength and Reasonable Ductility After Hot Rolling

Nicky Kisku, Arnab Sarkar, K. K. Ray, Sumantra Mandal

02.07.2018 | Ausgabe 8/2018

Fabrication of Ta-Reinforced Cu-Based Bulk Metallic Glass Composites by High-Pressure Torsion

Hamed Asgharzadeh

02.07.2018 | Ausgabe 8/2018

Recrystallization Behavior and Super-Elasticity of a Metastable β-Type Ti-21Nb-7Mo-4Sn Alloy During Cold Rolling and Annealing

Siyao Lu, Fengcang Ma, Ping Liu, Wei Li, Xinkuan Liu, Xiaohong Chen, Ke Zhang, Qingyou Han, Lai-Chang Zhang

29.06.2018 | Ausgabe 8/2018

Formation and Toughening Mechanisms of Dispersions in Interfacial Intermetallics of Dissimilar Laser Al/Steel Joints

J. Yang, Z. S. Yu, Y. L. Li, H. Zhang, W. Guo, P. Peng, Y. N. Zhou

06.07.2018 | Ausgabe 8/2018

Dissimilar Metal Weld Joints of P91/Ni Alloy: Microstructural Characterization of HAZ of P91 and Stress Analysis at the Weld Interfaces

Javed Akram, Prasad Rao Kalvala, Pradeep Chalavadi, Mano Misra

11.07.2018 | Ausgabe 8/2018

Effect of Deformation Temperature on the Microstructure and Mechanical Properties of High-Strength Low-Alloy Steel During Hot Compression

Chengzhi Zhao, Wilasinee Kingkam, Li Ning, Hexin Zhang, Li Zhiming

10.07.2018 | Ausgabe 8/2018 Open Access

Interaction Between Liquid Silver and Graphene-Coated SiC Substrate

Marta Homa, Natalia Sobczak, Jerzy J. Sobczak, Artur Kudyba, Grzegorz Bruzda, Rafał Nowak, Donatella Giuranno, Katarzyna Pietrzak, Marcin Chmielewski

10.07.2018 | Ausgabe 8/2018

Shear Assisted Processing and Extrusion (ShAPE™) of AZ91E Flake: A Study of Tooling Features and Processing Effects

Jens T. Darsell, Nicole R. Overman, Vineet V. Joshi, Scott A. Whalen, Suveen N. Mathaudhu

15.06.2018 | Ausgabe 8/2018

Fabrication of 7075-0.25Sc-0.15Zr Alloy with Excellent Damping and Mechanical Properties by FSP and T6 Treatment

Y. F. Mo, C. Y. Liu, G. B. Teng, H. J. Jiang, Y. Chen, Z. X. Yang, Y. Chen, S. C. Han

23.07.2018 | Ausgabe 8/2018

Effect of Thiourea on the Corrosion Behavior of Aluminum Anode Foil of Aluminum Electrolytic Capacitor

Zixi Fan, Chengfei Zhu, Fengzhen Chang

23.07.2018 | Ausgabe 8/2018

Friction and Wear Behavior of TiAl Matrix Composites Incorporated with Silver and Molybdenum Disulfide

Bing Xue, Weidong Ma, Yi Liu

19.07.2018 | Ausgabe 8/2018

Universal Mechanism of Viscoplastic Deformation of Metallic Materials Far from Thermodynamics Equilibrium

E. Zasimchuk, O. Baskova, O. Gatsenko, T. Turchak

11.07.2018 | Ausgabe 8/2018

Constitutive Behavior and Forming Limit of Mg-Al-Ca-Gd Alloy Sheets at Room and Elevated Temperatures

Kai-Min Yan, Jia-Qing Zhao, Gang Fang

16.07.2018 | Ausgabe 8/2018

Role of Centrifugal Casting on Electrochemical Corrosion Behavior of A356-SiCp Composite in 3.5 wt.% NaCl

S. Maimunnisa, P. Gore, T. P. D. Rajan, V. S. Raja

10.07.2018 | Ausgabe 8/2018

High Catalytic Activity of Phenol Photodegradation from Aqueous Solution with Novel Fe-Fe3O4-GO Nanocomposite

Giang H. Le, Quyet T. Ngo, Tuan T. Nguyen, Quang K. Nguyen, Trang T. T. Quan, Loi D. Vu, Gun D. Lee, Tuan A. Vu

13.07.2018 | Ausgabe 8/2018

Severe Hot Corrosion of the Superalloy IN718 in Mixed Salts of Na2SO4 and V2O5 at 700 °C

Dhananjay Pradhan, Girija Shankar Mahobia, Kausik Chattopadhyay, Vakil Singh

03.07.2018 | Ausgabe 8/2018

Microstructure and Mechanical Properties of Rapidly Cooled Friction Stir Welded Ti-6Al-4V Alloys

Zhenlei Liu, Yue Wang, Kang Yang, Dejun Yan

03.07.2018 | Ausgabe 8/2018

Corrosion Behavior of Nano-/Ultrafine-Grained Al-0.2 wt.% Sc Alloy Produced by Accumulative Roll Bonding (ARB)

Mina Vakili, Ehsan Borhani, Ali Ashrafi

05.07.2018 | Ausgabe 8/2018

Microstructural Characterization and High Strain Rate Plastic Flow Behavior of SMAW Armox500T Steel Joints from Spherical Indentation Experiments

Ambuj Saxena, A. Kumaraswamy, Sanghamitra Sethi, G. Madhusudhan Reddy, Vemuri Madhu

03.07.2018 | Ausgabe 8/2018

Alleviation of Mechanical Anisotropy in Ultrafine/Nano-grained AZ31 Magnesium Alloy

S. M. Fatemi, A. Zarei-Hanzaki, M. Eskandari, M. Haghshenas

10.07.2018 | Ausgabe 8/2018

Systematic Insight into Chloride Concentration, Applied Potential and Time Effect on the Passive Film of Cu-Zn-Ni Ternary Alloy in Alkaline Solution

Li Wang, Decheng Kong, Chaofang Dong, Binbin Zhao, Chang He, Yunyang Wan, Cheng Man, Xiaogang Li

29.06.2018 | Ausgabe 8/2018

The Sliding Wear and Frictional Behavior of M50-10 wt.%(Sn-Ag-Cu) Self-Lubricating Materials at Elevated Temperatures

Xiyao Liu, Xiaoliang Shi, Yuchun Huang, Xiaobin Deng, Zhao Yan, Bing Xue

05.07.2018 | Ausgabe 8/2018

Study of Tribological Characteristics of Multi-pass SMAW Armox 500T Steel Joints

Ambuj Saxena, A. Kumaraswamy, Vemuri Madhu, G. Madhusudhan Reddy

03.07.2018 | Ausgabe 8/2018

Fatigue Properties of Ti-6Al-4V Titanium Alloy Friction Stir Welding Joint

Zhenlei Liu, Yue Wang, Shude Ji, Dejun Yan

10.07.2018 | Ausgabe 8/2018 Open Access

Multilayered Coatings for High-Temperature Steam Oxidation: TGA Studies up to 1000 °C

T. Dudziak, E. Medvedovski, M. Homa

17.07.2018 | Ausgabe 8/2018

Fabrication and Mechanical Properties of In Situ Synthesized Ti2AlN/TiAl Composite

Daqun Wang, Dongli Sun, Xiuli Han, Qing Wang, Ningbo Zhang, Feixing Xu

05.07.2018 | Ausgabe 8/2018

Influence of Porosity and Pore Distributions on Strength Properties of Porous Alumina

Natsumi Miyazaki, Toshihiko Hoshide

05.07.2018 | Ausgabe 8/2018

Finite Element Simulation and Optimization of Gas-Quenching Process for Tool Steels

Minsu Jung, Seok-Jae Lee, Won-Beom Lee, Kyoung Il Moon

10.07.2018 | Ausgabe 8/2018

Investigation of the Performance of Flow Models for TWIP Steel

Suleyman Kilic, Fahrettin Ozturk, Catalin R. Picu

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.