Skip to main content
main-content

Zeitschrift

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 9/2013

Ausgabe 9/2013

Inhaltsverzeichnis ( 36 Artikel )

01.09.2013 | Ausgabe 9/2013

Parametric Study of Metal/Polymer Multilayer Coatings for Temperature Wrinkling Prediction

Lihong Zhang, Anne Marie Habraken, Amine Ben Bettaieb, Laurent Duchêne

01.09.2013 | Ausgabe 9/2013

Numerical Analysis of Effect of Backplate Diffusivity on the Transient Temperature in Friction Stir Welding

Zhihan Zhang, Wenya Li, Jinglong Li, Y. J. Chao

01.09.2013 | Ausgabe 9/2013

Microstructure Simulation of Al-Cu Alloy Based on Inverse Identified Interfacial Heat Transfer Coefficient

X. B. Bu, L. X. Li, L. Q. Zhang, B. W. Zhu, R. Xu, S. P. Wang

01.09.2013 | Ausgabe 9/2013

Hot Compression Deformation Behavior and Processing Maps of Mg-Gd-Y-Zr Alloy

Bin Chen, Wei-Min Zhou, Song Li, Xiao-Ling Li, Chen Lu

01.09.2013 | Ausgabe 9/2013

Inverse Thermal Analysis of Refractory Metal Laser Welds

S. G. Lambrakos

01.09.2013 | Ausgabe 9/2013

Double-Sided Single-Pass Submerged Arc Welding for 2205 Duplex Stainless Steel

Jian Luo, Yi Yuan, Xiaoming Wang, Zongxiang Yao

01.09.2013 | Ausgabe 9/2013

Low-Convection-Cooling Slope Cast AlSi7Mg Alloy: A Rheological Perspective

R. Ritwik, A. K. Prasada Rao, B. K. Dhindaw

01.09.2013 | Ausgabe 9/2013

Effective Process Design for the Production of HIC-Resistant Linepipe Steels

J. Nieto, T. Elías, G. López, G. Campos, F. López, R. Garcia, Amar K. De

01.09.2013 | Ausgabe 9/2013

Surface Modification of Thermal Barrier Coatings by Single-Shot Defocused Laser Treatments

Vakur Akdoğan, Mehmet M. Dokur, Gültekin Göller, Özgül Keleş

01.09.2013 | Ausgabe 9/2013

Microstructures and Properties of the C/Zr-O-Si-C Composites Fabricated by Polymer Infiltration and Pyrolysis

Yan Ma, Zhaohui Chen

01.09.2013 | Ausgabe 9/2013

Hot Deformation Characteristics of GH625 and Development of a Processing Map

H. T. Zhou, R. R. Liu, Z. C. Liu, X. Zhou, Q. Z. Peng, F. H. Zhong, Y. Peng

01.09.2013 | Ausgabe 9/2013

The Effect of the Imposed Boundary Rate on the Formability of Strain Rate Sensitive Sheets Using the M-K Method

Ramin Hashemi, Amir Ghazanfari, Karen Abrinia, Ahmad Assempour

01.09.2013 | Ausgabe 9/2013

Optimization of Hot Extrusion Process Parameters of Mg97Y2Zn1 Alloy Based on the Processing Maps

Bin Chen, Wei-min Zhou, Xiao-ling Li, Chen Lu

01.09.2013 | Ausgabe 9/2013

Erosive Wear Behavior of Nickel-Based High Alloy White Cast Iron Under Mining Conditions Using Orthogonal Array

J. Yoganandh, S. Natarajan, S. P. Kumaresh Babu

01.09.2013 | Ausgabe 9/2013

Crack-Growth Behavior of Laser Surface-Alloyed Low-Carbon Steel

Roman Šturm, Matjaž Žnidaršič, Janez Grum

01.09.2013 | Ausgabe 9/2013

Stress Corrosion Cracking of Welded API X70 Pipeline Steel in Simulated Underground Water

Z. Y. Liu, C. W. Du, C. Li, F. M. Wang, X. G. Li

01.09.2013 | Ausgabe 9/2013

Primary Alpha Grain Coarsening Behavior of Ti-6Al-2Zr-1Mo-1V Alloy in the Alpha + Beta Two-Phase Field

C. Wu, H. Yang, H. W. Li, G. B. Yang

01.09.2013 | Ausgabe 9/2013

Advance Complex Liquid Nitriding of Stainless Steel AISI 321 Surface at 430 °C

Yuanhua Lin, Jun Wang, Dezhi Zeng, Runbo Huang, Hongyuan Fan

01.09.2013 | Ausgabe 9/2013

Solutioning and Aging of MAR-M247 Nickel-Based Superalloy

Renato Baldan, Rafaela Lisboa Pereira da Rocha, Rafael Bogado Tomasiello, Carlos Angelo Nunes, Alex Matos da Silva Costa, Miguel Justino Ribeiro Barboza, Gilberto Carvalho Coelho, Ruben Rosenthal

01.09.2013 | Ausgabe 9/2013

Water-Air Spray Cooling of Extruded Profiles: Process Integrated Heat Treatment of the Alloy EN AW-6082

M. Nowak, O. Golovko, F. Nürnberger, I. Frolov, M. Schaper

01.09.2013 | Ausgabe 9/2013

The Effect of Colored Titanium Oxides on the Color Change on the Surface of Ti-5Al-5Mo-5V-1Cr-1Fe Alloy

Wenwen Peng, Weidong Zeng, Yaowu Zhang, Chunling Shi, Biao Quan, Jianding Wu

01.09.2013 | Ausgabe 9/2013

Influence of Microstructural Inhomogeneity and Residual Stress on Very High Cycle Fatigue Property of Clean Spring Steel

Wei Li, Tatsuo Sakai, Ping Wang

01.09.2013 | Ausgabe 9/2013

Effects of Fabrication Parameters on Interface of Zirconia and Ti-6Al-4V Joints Using Zr55Cu30Al10Ni5 Amorphous Filler

Yuhua Liu, Jiandong Hu, Ping Shen, Zuoxing Guo, Huijie Liu

01.09.2013 | Ausgabe 9/2013

Surface Modification of Commercial Low-Carbon Steel using Glow Discharge Nitrogen Plasma and its Characterization

S. Srikanth, P. Saravanan, Alphonsa Joseph, K. Ravi

01.09.2013 | Ausgabe 9/2013

Effect of Gas Composition on Nitriding and Wear Behavior of Nitrided Titanium Alloy Ti-15V-3Cr-3Al-3Sn

C. Anandan, P. Dilli Babu, L. Mohan

01.09.2013 | Ausgabe 9/2013

Dielectric-Resonant Antenna Studies of Dysprosium Doped Barium Zirconate Ceramic

S. Parida, Anurag Bisen, Ela Sinha, S. K. Rout

01.09.2013 | Ausgabe 9/2013 Open Access

A Modified Constitutive Equation for Aluminum Alloy Reinforced by Silicon Carbide Particles at Elevated Temperature

Yajing Yang, Fuguo Li, Zhanwei Yuan, Huijuan Qiao

01.09.2013 | Ausgabe 9/2013

Structure and Properties of Ti-19.7Nb-5.8Ta Shape Memory Alloy Subjected to Thermomechanical Processing Including Aging

S. Dubinskiy, Vladimir Brailovski, S. Prokoshkin, V. Pushin, K. Inaekyan, V. Sheremetyev, M. Petrzhik, M. Filonov

01.09.2013 | Ausgabe 9/2013

Characterization of Fracture and Fatigue Behavior of 7050 Aluminum Alloy Ultra-thick Plate

Lili Wei, Qinglin Pan, Yilin Wang, Lei Feng, Hongfeng Huang

01.09.2013 | Ausgabe 9/2013

Electric and Dielectric Properties of Cr-Ga Substituted BaM Hexaferrites for High-Frequency Applications

Ihsan Ali, M. U. Islam, M. S. Awan, Mukhtar Ahmad

01.09.2013 | Ausgabe 9/2013

Tensile and Compressive Properties of Mg-3Al-2Zn-2Y Alloy at Different Strain Rates

Hao Liang, Fusheng Pan, Jingfeng Wang, Jijun Yang

01.09.2013 | Ausgabe 9/2013

Investigations of the Failure in Boilers Economizer Tubes Used in Power Plants

Roozbeh Siavash Moakhar, Mehrad Mehdipour, Mohammad Ghorbani, Milad Mohebali, Behrad Koohbor

01.09.2013 | Ausgabe 9/2013 Open Access

Characteristics of Dissimilar FSW Welds of Aluminum Alloys 2017A and 7075 on the Basis of Multiple Layer Research

Krzysztof Mroczka, Anna Wójcicka, Adam Pietras

01.09.2013 | Ausgabe 9/2013

Corrosion Protection of Electro-Galvanized Steel by Ceria-Based Coatings: Effect of Polyethylene Glycol (PEG) Addition

Y. Hamlaoui, L. Tifouti, F. Pedraza

01.09.2013 | Ausgabe 9/2013

Gamma Ray Irradiation Effects on the Ferroelectric and Piezoelectric Properties of Barium Titanate Ceramics

Nirmali Medhi, A. K. Nath

01.09.2013 | Ausgabe 9/2013

Microstructure and Properties of TIG/FSW Welded Joints of a New Al-Zn-Mg-Sc-Zr Alloy

Xuefeng Lei, Ying Deng, Yongyi Peng, Zhimin Yin, Guofu Xu

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise