Skip to main content
main-content

Zeitschrift

Journal of Materials Engineering and Performance

Journal of Materials Engineering and Performance 9/2020

Ausgabe 9/2020

Special Issue Focus: Selected Articles from the 11th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing

Inhaltsverzeichnis ( 67 Artikel )

28.09.2020 | Guest Editorial | Ausgabe 9/2020

Selected Articles from the 11th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing

Surojit Gupta

25.03.2020 | Ausgabe 9/2020

On the Synthesis and Characterization of Polylactic Acid, Polyhydroxyalkanoate, Cellulose Acetate, and Their Engineered Blends by Solvent Casting

Saud Abu Aldam, Maharshi Dey, Sabah Javaid, Yun Ji, Surojit Gupta

27.04.2020 | Ausgabe 9/2020

Reduction and Immobilization of Chromate Using Nanometric Pyrite

Amelia Bergeson, Travis Reed, Allen W. Apblett

25.06.2020 | Ausgabe 9/2020

Rare Earth Element Recovery Using Monoethanolamine

Paul Kim, Gaurav Das, Malgorzata M. Lencka, Andre Anderko, Richard E. Riman

19.06.2020 | Ausgabe 9/2020

Sinterability of Silicon Carbide and Boron Carbide under Single-Mode Microwave Fields

Selva Vennila Raju, Michael Kornecki, Raymond E. Brennan

13.08.2020 | Ausgabe 9/2020

Influence of Soybean Hull Fiber Concentration on the Water Absorption and Mechanical Properties of 3D-Printed Thermoplastic Copolyester/Soybean Hull Fiber Composites

Vamsi Krishna Balla, Kunal H. Kate, Jogi Ganesh Dattatreya Tadimeti, Jagannadh Satyavolu

01.09.2020 | Ausgabe 9/2020

A Study on the Sintering of a Mixed Powder Containing Alumina and Aluminum for Control of Volume Shrinkage during Sintering

Ken’ichiro Kita, Naoki Kondo, Mikinori Hotta

18.09.2020 | Ausgabe 9/2020

Green Process for Preparation of Nickel Hydroxide Films and Membranes

Audrey Vecoven, Dewan Russel Rahman, Allen W. Apblett

17.09.2020 | Ausgabe 9/2020

Multi-Objective Optimization for Energy Absorption of Carbon Fiber-Reinforced Plastic/Aluminum Hybrid Circular Tube under Both Transverse and Axial Loading

Qihua Ma, Boyan Dong, Yibin Zha, Jiarui Sun, Xuehui Gan, Ming Cai, Tianjun Zhou

25.08.2020 | Ausgabe 9/2020

Performance of Ceramic-Composite Armors under Ballistic Impact Loading

Santosh Kumar, Kiran Akella, Makarand Joshi, Asim Tewari, N. K. Naik

06.09.2020 | Ausgabe 9/2020

A Study on the Tribological Properties of Al-AlN-Y2W3O12 Hybrid Composites

Jamuna Sethi, Sudipta Mohapatra, Abhijeet Sethi, Siddhartha Das, Karabi Das

17.09.2020 | Ausgabe 9/2020

Tribological Performance and Tribofilm Evolution of TiAl Matrix Composites with Silver and Titanium Diboride at Elevated Temperatures

Bin Chen, Zengshi Xu, Yi Liu, Bing Xue, Weidong Ma

18.09.2020 | Ausgabe 9/2020

Mechanisms of Fatigue Endurance in Alloy 617M at Different Temperatures (300-1023 K)

Aritra Sarkar, Chanchal Ghosh, A. Nagesha, R. Mythili

28.08.2020 | Ausgabe 9/2020

Novel Al-Cu-Mn-Zr-Sc Compositions Exhibiting Increased Mechanical Performance after a High-Temperature Thermal Exposure

Justin Lamb, Baptiste Rouxel, Timothy Langan, Thomas Dorin

27.08.2020 | Ausgabe 9/2020 Open Access

Influence of Vacuum Support on the Fatigue Life of AlSi9Cu3(Fe) Aluminum Alloy Die Castings

Péter Szalva, Imre Norbert Orbulov

08.09.2020 | Ausgabe 9/2020

The Effect of Severe Plastic Deformation on the Corrosion Resistance of AISI Type 304L Stainless Steel

Gopinath Shit, S. Ningshen

31.08.2020 | Ausgabe 9/2020

Effect of Twin-Induced Texture Evolution on Corrosion Resistance of Extruded ZK60 Magnesium Alloy in Simulated Body Fluid

Ying Xiong, Tao Zhu, Jie Yang, Yi Yu, Xinghua Gong

01.09.2020 | Ausgabe 9/2020

Study on the Friction Behaviors of Copper Nanowires in Ionic Liquids under External Voltages

Zheng Wang, Lina Zhu, Lina Si, Xiaoyong Ren, Shuai Wu

02.09.2020 | Ausgabe 9/2020

Influence of Anticorrosive Coatings Integrated with Novel Core–Shell Pigment on the Corrosion Protection of Pipelines in CO2 Environment

M. G. Mohamed, N. M. Ahmed, W. S. Mohamed, M. R. Mabrouk

02.09.2020 | Ausgabe 9/2020

Hot Corrosion Performance of Plasma-Sprayed Multiwalled Carbon Nanotube–Al2O3 Composite Coatings in a Coal-Fired Boiler at 900 °C

Rakesh Goyal, Buta Singh Sidhu, Vikas Chawla

28.08.2020 | Ausgabe 9/2020

Stress Corrosion Resistance of Laser Shock Peening/Microarc Oxidation Reconstruction Layer Fabricated on AZ80 Magnesium Alloy in Simulated Body Fluid

Ying Xiong, Xiaxia Hu, Zeyu Weng, Renguo Song

11.09.2020 | Ausgabe 9/2020

Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation

S. V. Gladkovsky, D. A. Konovalov, S. V. Kuteneva

08.09.2020 | Ausgabe 9/2020

Stress–Strain Properties of Artificially Aged 6061 Al Alloy: Experiments and Modeling

Rasid Ahmed Yildiz, Safak Yilmaz

08.09.2020 | Ausgabe 9/2020

Study on the Lubrication Mechanism of Titanium Alloys with Surface Dimples Filled with Sn-Ag-Cu and TiC under Dry Sliding Friction

Bing Xue, Zhenyu Yang, Xiaoliang Shi, Hongyan Zhou, Guanchen Lu, Yawen Xue, Jin Zhang, Chaohua Wu

11.09.2020 | Ausgabe 9/2020

Effect of Zn/Mg Ratio on Microstructure and Properties of Cold Extruded Al-xZn-2.4Mg-0.84Cu-0.2Zr-0.25Ti Aluminum Alloy

Chen Li, Xiaojing Xu, Hanhui Chen, Vitus Tabie, Jie Cai, Yangguang Liu, Zheng Liu, Ching-Tun Peng

14.09.2020 | Ausgabe 9/2020

Microstructure and Corrosion Behavior of ZnO-Mg Coating on AISI 4140 Steel Fabricated by Spray Coating

T. Ramkumar, M. Selvakumar, M. Mohanraj, P. Chandramohan, P. Narayanasamy

11.09.2020 | Ausgabe 9/2020

Effects of Ti Content and Annealing on Fracture Toughness and Scratch Resistance of Electroless Ni-P-Ti Coatings

Zhi Li, Zoheir Farhat

17.09.2020 | Ausgabe 9/2020

Long-Term Creep Behavior of a CoCrFeNiMn High-Entropy Alloy

K. A. Rozman, M. Detrois, T. Liu, M. C. Gao, P. D. Jablonski, J. A. Hawk

15.09.2020 | Ausgabe 9/2020

Field Study of Weather Conditions Affecting Atmospheric Corrosion by an Automobile-Carried Atmospheric Corrosion Monitor Sensor

Yan-liang Huang, Dan Yang, Yong Xu, Dong-zhu Lu, Li-hui Yang, Xiu-tong Wang

28.08.2020 | Ausgabe 9/2020

Effect of Ultrasonic Shot Peening on Oxidation Behavior of T91 and SS347 Steels in Air and Steam at 650 °C

Deepsovan Mondal, Kausik Chattopadhyay, Vakil Singh

27.08.2020 | Ausgabe 9/2020 Open Access

Surface Properties and Corrosion Behavior of Turn-Assisted Deep-Cold-Rolled AISI 4140 Steel

P. R. Prabhu, Deepa Prabhu, Sathyashankara Sharma, S. M. Kulkarni

28.08.2020 | Ausgabe 9/2020

Solid-State Repair of Casting Defects in ZL210 Aluminum Alloy

Zan Lv, Song Han, Wei Hu, Zhibo Dong, Ruofei Huang, Kang Yang

14.09.2020 | Ausgabe 9/2020

Study on Low-Temperature Sintering Behavior of 90W-7Ni-3Fe Alloys: The Influence of Sn Addition

Wentan Zhu, Yunzhu Ma, Wensheng Liu, Qingshan Cai, Yufeng Huang, Zhongliu Wen

04.09.2020 | Ausgabe 9/2020

An Investigation on Constitutive Relation and Dynamic Recrystallization of Hastelloy C-276 Alloy During Hot Deformation

Shengli Guo, Jiachen Liu, Bin Du, Shengpu Liu, Xiaoyu Zhang, Defu Li

27.08.2020 | Ausgabe 9/2020

Thermal Analysis Experiments in Titanium and Magnesium Additions to 4130 Steel

Robert Tuttle

02.09.2020 | Ausgabe 9/2020

Effects of Pre-Deformation and Heat Treatment on the Microstructure and Mechanical Properties of Cu-2.5Be Sheets

Yang Liu, Deshan Chen, Daibo Zhu, Xiaojin Liu, Tan Han, Peng Zhang

08.09.2020 | Ausgabe 9/2020

Effect of Trimming Process Parameters on Sheared Edge Geometry and Stretch Limit: An Experimental Investigation

K. Wang, G. Ayoub, A. Ilinich, G. Kridli

05.09.2020 | Ausgabe 9/2020

Effect of Pre-treatment on Roughness and Hydrophobicity of Electro-Etched Steel with Improved Corrosion Resistance

Mohammad Alinezhadfar, Mahdi Mozammel

01.09.2020 | Ausgabe 9/2020

Preparation and Tribological Behavior of Ti2AlNb/Ag Self-Lubricating Composites

Wei Wang, Haixiong Zhou, Qingjuan Wang, Ziru Han, Kuaishe Wang

06.09.2020 | Ausgabe 9/2020

Effects of Heating Rate on the Thermal and Mechanical Properties of the Bauxite-Based Low-Cement Refractory Castables

Hajar Ahmadi Moghadam, Seyed Mohammad Arab

09.09.2020 | Ausgabe 9/2020

Effects of Laser Premelting Treatment on Microstructure and Mechanical Properties of High-Strength Steel Weld Obtained by Laser-MAG Hybrid Welding

Yanqing Li, Shuangyu Liu, Qiushi Zhang, Yongsheng Ma, Fulong Zhang, Genzhe Huang

08.09.2020 | Ausgabe 9/2020

Electrochemical Surface Treatment to Enhance Corrosion Resistance and Bioresistance of Medical-Grade Stainless Steels

A. A. Kityk, V. Pavlik, M. Boča, D. Pangallo, M. Kapustova, Y. Halahovets

27.08.2020 | Ausgabe 9/2020

The Impact of Solution Treatment Time (T6) and Deep Cryogenic Treatment on the Microstructure and Wear Performance of Magnesium Alloy AZ91

Mustafa Özgür Öteyaka, Burak Karahisar, Hasan Candan Öteyaka

06.09.2020 | Ausgabe 9/2020

Effect of Heat Treatments on Residual Stress and Properties of AISI 316L Steel Processed by Directed Energy Deposition

Alberta Aversa, Gabriele Piscopo, Alessandro Salmi, Mariangela Lombardi

28.08.2020 | Ausgabe 9/2020

Effect of Heat Treatment on the Microstructure Evolution and Sensitization Behavior of High-Silicon Stainless Steel

Prince Setia, Ayush Anand, T. Venkateswaran, K. Thomas Tharian, Sudhanshu S. Singh, K. Mondal, Shashank Shekhar

30.08.2020 | Ausgabe 9/2020

Strength and Deformation Properties of Low-Alloy Steel Bolts with Electroless Ni-P Coating: An Investigation of Two Thermal Routes

K. S. Correia, L. G. Greca, L. Sopchenski, P. Soares, F. L. Amorim, R. D. Torres

09.09.2020 | Ausgabe 9/2020

Assessment of Cooling Performance of Neem Oil for Distortion Control in Heat Treatment of Steel

K. M. Pranesh Rao, K. Narayan Prabhu

11.09.2020 | Ausgabe 9/2020

Kinetics of Cr2N Precipitation and Its Effect on Pitting Corrosion of Nickel-Free High-Nitrogen Austenitic Stainless Steel

K. Krishna Kumar, J. Anburaj, R. Dhanasekar, T. Satishkumar, J. Abuthakir, P. Manikandan, R. Subramanian

26.08.2020 | Ausgabe 9/2020

In Vitro Corrosion Behavior and Cytotoxicity of Polycaprolactone–Akermanite-Coated Friction-Welded Commercially Pure Ti/AZ31 for Orthopedic Applications

Mojtaba Sadeghi Gogheri, Masoud Kasiri-Asgarani, Hamid Reza Bakhsheshi-Rad, Hamid Ghayour, Mahdi Rafiei

27.08.2020 | Ausgabe 9/2020

Forming Limit Diagrams of Low-Carbon Steels Obtained Using Digital Image Correlation Technique and Enhanced Formability Predictions Incorporating Microstructural Developments

Basavaraj H. Vadavadagi, H. V. Bhujle, Rajesh Kisni Khatirkar

15.09.2020 | Ausgabe 9/2020

Tower-Like ZnO Nanorod Bundles Grown on Freestanding Diamond Wafers for Electron Field Emission Improvement

Yanyan Shen, Yubin Gong, Shengwang Yu, Yuxin Jia, Hongjun Hei, Jie Gao, Huarong Gong

01.09.2020 | Ausgabe 9/2020

Surface Chemistry and Semiconducting Properties of Passive Film and Corrosion Resistance of Annealed Surgical Stainless Steel

Rodrigo Kenji de Oliveira, Olandir Vercino Correa, Mara Cristina Lopes de Oliveira, Renato Altobelli Antunes

01.09.2020 | Ausgabe 9/2020

Structural and Hydrogen Storage Properties of Mg60-Ni40 and Mg80-Ni20 Alloys Prepared by Planar Flow Casting

Sefa Emre Sünbül, Sultan Öztürk, Kürşat İçin

31.08.2020 | Ausgabe 9/2020

Combined Effect of Ag and Mg Additions on Localized Corrosion Behavior of Al-Cu Alloys with High Cu Content

Jian Wang, Zhiyi Liu, Song Bai, Jing Cao, Juangang Zhao, Diping Zeng

30.08.2020 | Ausgabe 9/2020

Effect of Ti Microalloying on the Corrosion Behavior of Low-Carbon Steel in H2S/CO2 Environment

Chi Yu, Hongyan Wang, Xiuhua Gao, Hongwei Wang

08.09.2020 | Ausgabe 9/2020

Research on the Modification of Silane/Zeolite Composite Anticorrosive Membrane on Ti-6Al-4V Alloy Surface by Graphene Oxide and Its Mechanism

Juan Du, Liu Qingmao, Xiangyun Li, Ziming Wei, Song Haipeng

09.09.2020 | Ausgabe 9/2020

Tensile Properties of Built and Rebuilt/Repaired Specimens of 316L Stainless Steel Using Directed Energy Deposition

Louis Simoneau, Alexandre Bois-Brochu, Carl Blais

16.09.2020 | Ausgabe 9/2020

Heterogeneity and Homogeneity in 2/4 N Multilayered Al Fabricated by Accumulative Roll Bonding and Annealing

Xiaojuan Jiang, Si Gao, Ling Zhang, Guilin Wu, Xiaoxu Huang, Nobuhiro Tsuji

08.09.2020 | Ausgabe 9/2020

Discontinuous Dynamic Recrystallization Mechanism and Twinning Evolution during Hot Deformation of Incoloy 825

XiTing Zhong, LinKe Huang, Feng Liu

05.09.2020 | Ausgabe 9/2020

In Vitro Biological Characterization of Natural Hydroxyapatite/Single-Walled Carbon Nanotube Composite Coatings Synthesized by Electrophoretic Deposition on NiTi Shape Memory Alloy

Leila Nematzadeh, Nazila Horandghadim, Vida Khalili, Jafar Khalil-Allafi

10.09.2020 | Ausgabe 9/2020 Open Access

Influence of Heat Treatment on the Microstructure and Corrosion Behavior of Thixo-cast Mg-Y-Nd-Zr

Z. Szklarz, Ł. Rogal

09.09.2020 | Ausgabe 9/2020

Shape-Controlled Catalytic ZIF-67 Micromotors for Dye Adsorption

Huijun Chen, Hongli Zhu, Jing Huang, Xiaomiao Feng

08.09.2020 | Ausgabe 9/2020

Micro/Meso-Scale Equal Channel Angular Pressing of Al 1070 Alloy: Microstructure and Mechanical Properties

Walaa Abdel-Aziem, Atef Hamada, Takehiko Makino, Mohsen A. Hassan

16.09.2020 | Ausgabe 9/2020

Multivariable Analysis of Electrodeposited Silane/Zinc Coating—Improvement of Cathodic Protection of Steel

Victor Hugo C. A. Rego, Gabriel Batalha Leoni, Simone Louise D. C. Brasil

08.09.2020 | Ausgabe 9/2020

Residual Stress Characterization by X-Ray Diffraction and Correlation with Hardness in a Class D Railroad Wheel

A. B. Rezende, S. T. Fonseca, D. J. Minicucci, F. M. Fernandes, P. F. S. Farina, P. R. Mei

14.09.2020 | Ausgabe 9/2020

Friction and Wear of Metals under Micro-abrasion, Wet and Dry Sliding Conditions

Cesar David Resendiz-Calderon, Leonardo Israel Farfan-Cabrera, Joaquín Esteban Oseguera-Peña, Irving Cázares-Ramírez, Ezequiel Alberto Gallardo-Hernandez

17.09.2020 | Ausgabe 9/2020

Use of Hardness and Electrical Conductivity Testing to Evaluate Heat Damage and Sensitization in 5083-H116 Al-Mg Alloys

Yu-Chih Tzeng, Cheng-Yu Lu, Kaliyaraj Kaliyaperumal, Ren-Yu Chen

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise