Ausgabe 9/2026
Inhalt (78 Artikel)
Compression Behavior and Fatigue Strength of Additively Manufactured Ti6Al4V Strut-Based Lattice Structures: A Review
- Review
P. Parameswaran, T. Ram Prabhu, Gbadebo Owolabi, D. Kesavan, R. Jayaganthan
Study on Microstructure and Mechanical Properties of TA15 Titanium Alloy Repaired by Laser Deposition Under Various Annealing Processes
- Original Research Article
Song Zhou, Haotong Yu, Jinlan An, Lei Wang, Bingfeng Zhao, Liyang Xie, Bin Wu, Bendong Xing, Can Cui
Precipitation Behavior and Mechanical Properties of High-Manganese Steel During Aging
- Original Research Article
Zhihai Wu, Hao Fu, Xiedong Huang, Ru Ge, Tongtao Wei, Jihua Li, Youxiao Cai, Xinyu Shen, Zulai Li, Quan Shan
Coarsening Behaviors of γ′ Particles in a Co-Al-W-Based Single-Crystal Alloy
- Original Research Article
Lei Shi, Fengjiao Guo, Shuai Zhao, Liming Lei, Jinjiang Yu, Xiaofeng Sun
Study about Heat Treatment on Microstructure and Properties of ADC12 Alloy with Varied Compositions
- Original Research Article
Xiangjie Wang, Zhenyu Wu, Lumin Gou, DongMei Tian, Changke Chen, Guozhong He, Zhaoxi Song, Chengcheng Chen, Jianzhong Cui
Analysis of the Hot Deformation Behavior and Microstructure of 00Ni18Co8Mo3TiAlB Maraging Steel
- Original Research Article
Yuanhang Sun, Yucheng Zhou, Liujie Xu, Lujun Cao
The Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of SLM-AlSi10Mg
- Original Research Article
Chunsheng Zou, Haijun Pan, Wenyu Tao, Lin Liu, Zhiqiang Wu, Zhihui Cai
Enhancement of Mechanical and Oxidation Resistance in S390 High-Speed Steel via Graphene Nano-sheet Addition and Heat Treatment
- Original Research Article
H. M. Zidan, Omayma A. El-Kady, A. Abd-Elwahed, Hossam M. Yehia
Study on Weld Microstructure and Interface of Explosive Composite Titanium/Aluminum Composite Plate Based on Composite Welding
- Original Research Article
Linyue Bai, Fei Shao, Xingkun Xie, Lei Gao, Lixiang He, Yunqiang Zhang, Qingxian Hu
Novel Tactics to Balancing Strength and Thermoelectric Efficiency in AA2124 Composites via High-Entropy Alloy Reinforcements
- Original Research Article
Rashid Khan, G. Yuvaraj, Sabbah Ataya, Prakash Selvam, Joy Djuansjah
Experimental Investigation, Characterization, and Deep Learning-Driven Analysis of Polymer-Based Thermal Protection Systems for Space Rocket Launch Conditions
- Original Research Article
Veerabhadram Gaddam, C. Chandrasekhara Sastry, Pullarao Muvvala, P. A. Saravana Perumal
Ultrasonic Surface Rolling Process with Multi-Parameter Coupling for Surface Integrity and Fatigue Life Enhancement of 20CrNiMo Steel
- Original Research Article
Shubo Xu, Yanrui Wang, Kangwei Sun, Hongliang Zhou, Yuefei Pan, Xiaojuan Lin, Tingting Li, Tianhua Li, Chen Xu, Wei Zheng, Lili Huang
Mechanical, Thermal, and Microstructure Characterization of ER90S-B3 on SS347 Substrate Wire Arc Additive Manufacturing
- Original Research Article
S. Rashia Begum, R. Samprashanth, M. Vasumathi, K. Vigneshwaran, N. Venkateshwaran
Effects of Incorporating Ferric Ions from Hematite into Metakaolin on Microscopic Pore Structures and Compressive Strength of Geopolymers
- Original Research Article
D. L. Vofo Ngnintedem, Jean Jacques Kouadjo Tchekwagep, A. Oumarou Amadou, H. Kouamo Tchakouté, Ruoyu Wang, Fengzhen Yang, Sylvain Tome, C. Henning Rüscher, Pengkun Hou
Fretting Wear Behavior of Glass-Fiber-Reinforced Polyamide 66
- Original Research Article
Yong Zeng, Guixiang Zhang, Chao Su, Xiaohua Liu, Zhangyue Qin, Pingdi Ren
Effect of Sn on Grain Boundary Character Distribution in Austenitic Stainless Steel 316L
- Original Research Article
Tong He, Yang Bai, Fei Yan Ma, Yu Meng Song, Hao Feng
Effect of Multiwall Carbon Nanotube Reinforcement on the Microstructural, Mechanical, and Wear Properties of Magnesium Nanocomposites for Lightweight Aerospace and Automotive Components
- Original Research Article
Veera Prabakaran Elanjeitsenni, Prasanna Naveen Kumar Jeyaraman, Senthil Vadivu Kulandhaivelu, S. C. Vettivel
Surface Characterization and Optimization of Electropolishing Parameters for a Near Equiatomic Binary NiTi Alloy
- Original Research Article
L. Ravi Kumar, B. Vijaya Ramnath
Support-Free Fabrication of Inclined and Suspended Thin Walls for Al-Cu-Mg-Ag Alloys via Wire Arc Additive Manufacturing
- Original Research Article
Xingchen Li, Yangyu Yan, Yueling Guo, Changmeng Liu
Microstructure and Biological Properties of Magnesium-Doped Titanium Dioxide Coatings Formed on Titanium Implants via Microarc Oxidation
- Original Research Article
Mengyan Zhao, Kaihang Lu, Quanming Zhao, Yonggui Wang
The Effect of Laser Power Variation on the Performance of In-Situ Synthesized Wide-Temperature-Range Sulfide and Boride Self-Lubricating Wear-Resistant Coatings
- Original Research Article
GuoChao Ma, Ming Pang
Tunable Properties of Calcium Ferrite Nanopowders Synthesized via Diethanolamine-Assisted Sol-Gel Auto Combustion Method
- Original Research Article
Thanit Tangcharoen
Voltage-Dependent Visible-Light-Driven Bactericidal Porous Graphene
- Original Research Article
Reza Rahighi, Mohammad Mirzaei, Abdulsalam Aji Suleiman, Amirmahmoud Bakhshayesh
In-Situ Tensile Fracture Behavior and Interface Microstructures in Ti/Al/Ti Three-Layered Explosive Clad Plate
- Original Research Article
Huhe Wang, Yongpeng Shang, Xiaojie Li, Jian Wang, Qian Liu
Investigation on Mechanical Properties and Tribological Characteristics of PTFE Composites by the Filler of PPS and Surface-Modified Nano-WO3
- Original Research Article
Xuhang Lin, Bo Liu, Fuyun Cui, Sen Liu, Da Bian, Shanhua Qian
Corrosive Behavior of Chemical Decontaminating Reagents on SUS403 Steel
- Original Research Article
Kamal Asghar, Miguta Faustine Ngulimi, Sion Kim, Bum Kyoung Seo, Changhyun Roh
Effect of Temperature on Cupping Behavior and Microstructural Evolution in Copper-Bearing Stainless Steel
- Original Research Article
Jinkang Sun, Tiantian Zhang, Shuqian Guo, Juan Li, Guanghui Zhao, Lianwei Ma, Yugui Li
Electrodeposition of Anticorrosive and Antimicrobial Cu-Mn Coating on Mild Steel Using Single Bath Technique
- Original Research Article
Sharada Priyadarshini, Ramesh S. Bhat, A. G. Bindu, P. Nagaraj, P. D. Rekha
Synthesis of Waterborne Polyurethane/Polyacrylate Composite Emulsion Modified with Organofluorine and its Film Forming Performances
- Original Research Article
Youliang Cheng, Zefeng Xu, Changqing Fang, Meng Guo, Fang Yang, Jing Chen, Yifan Deng, Wenke Qiu
Effect of Laser Power on Porosity and Cracks of Al/Cu Joint
- Original Research Article
Zengye Zhao, Juan Li, Xiangdong Su
Fatigue Performance of Austenitic Stainless Steel Repaired by Welding for Remanufacturing Applications
- Original Research Article
A. Molina-Sanchez, C. D. Resendiz-Calderon, H. Vieyra, O. Soriano-Vargas, C. A. Franco-Tello
Tensile Mechanical Behavior and Microstructural Evolution of 6014-T4P Aluminum Alloy under High Strain Rates
- Original Research Article
Longhui Lu, Wenfei Peng, Yiyu Shao, Shangheng Xie, Shenghong Xue, Zhenchen Guo
Investigation on Microstructure and Mechanical Properties of Al-Cu-Li Alloys by Pre-deformation and Aging
- Original Research Article
Ting Yao, Zhongwei Chen, Zhentong Guo, Haolan Zhang, Zhonghua Guo
Wear Mechanism of SiCf/SiC Composite and Effect of Worn Composite Chip Size on Machine Tool Guideway Components
- Original Research Article
Chang Song, Yangyang Zhao, Ben Wang, Qiwei Ye, Qi Zhang
Effect of N2/Ar Flow Ratio on the Microstructure and Properties of AlCrSiN/AlTiN Multilayer Coatings
- Original Research Article
Yuelin Wang, Qixiang Fan, Mengxue Guan, Daqian Yu, Fengting Cao, Yanmei Liu, Tiegang Wang
Size Effect and the Mechanical Property Anisotropy of Commercial Purity Nickel Foils
- Original Research Article
S. Wang, L. Zhao, Q. Q. Shi, C. Chen, J. Wang, H. Gong, L. M. Luo
Unveiling the Effect of Low-Cycle Fatigue on Additively Manufactured AlSi10Mg Component: Insights into Microstructure and Mechanical Properties
- Original Research Article
Pradyut Sengupta, Shuvam Mandal, B. Sai Charan, Deepak Adhikari, Harish C. Kaushik, Ajit Panigrahi, Manoj Kumar, Deepak K. Pattanayak, Satya P. Mohapatra, Mayadhar Debata
Study of Wear Resistant and Self-Lubricating Epoxy/Ti3SiC2 MAX Phase Composites
- Original Research Article
Messaoud Berber, Adel Haddad, Nabil Chiker, Youcef Hadji, Riad Badji, Merouane Salhi, Abdessabour Benamor, Maharshi Dey, M. Hadji
Enhancing Mechanical and Tribological Properties of Al-based Nanocomposites via Equal-Weight-Ratio Graphite Nanoplatelet and Hexagonal Boron Nitride Hybrid Nanofillers
- Original Research Article
Arka Ghosh, Syed Nasimul Alam, Ghananshu Patil, Parth Patel, Vidhi Sachan, Nazrul Haq, Asiful H. Seikh
Thermoelectric Properties of (Nb0.6Ta0.4)0.8Ti0.2FeSb/Carbon Nanotube Composites
- Original Research Article
E. M. Elsehly, A. El-Khouly, N. G. Chechenin, V. V. Khovaylo, A. M. Adam
Impact of Concentrations of AlN Nanoparticles on Properties of Ni-P Coatings Synthesized by Electroless Process
- Open Access
- Original Research Article
Ahmad Saadi Samra, Muhammad Ahmad, Ramazan Kahraman, Bilal Mansoor, R. A. Shakoor
Heat Build-Up Effect on the Microstructure and Properties of Additive-Manufactured AlSi10Mg Parts
- Open Access
- Original Research Article
Paola Leo, Gilda Renna, Andrea Amleto De Luca, Chiara Scaramuzzi
Influence of Low-SiC Content on the Tribological and Electrical Properties of Cu Composites Produced by Spark Plasma Sintering
- Original Research Article
Ertuğrul Çelik
First-Principles Calculations of Mechanical and Thermodynamic Properties of ReTa3 as a Transition Layer in Ta-Re-Layered Composites
- Original Research Article
Jing Yan, Yonghao Fu, Haijun Wu, Xiao Wang, Lu Li, Hongzhong Cai, Xiaoying Cui, Zhentao Yuan
Directional and Spatial Dependency of Fastener Failure Energy and Pipe Burst Pressure in Fabricated Components
- Open Access
- Original Research Article
Viswa Teja Vanapalli, B. K. Dutta, J. Chattopadhyay
An Eigenstrain-Based Full-Field Residual Stress Reconstruction Method Applied for Laser Shock Peened Titanium Alloy Blades
- Original Research Article
Yuhui Fan, Chao You, Sihai Luo, Yi Cheng, Daiyang Gao, Rong Jiang, Yingdong Song
Effect of Solution Temperature on Mechanical Properties and Forming Limit of 6060 Aluminum Alloy
- Original Research Article
Wenzheng Dong, Haiyan Li, Aoyu Zhao, Shuxian Zhou, Qiquan Lin
Study on the Multi-Field Coupling Mechanism in the Process of Alternating Magnetic Field-Assisted Laser Cladding of High-Hardness Phase WC Alloy
- Original Research Article
Qian Sun, Chang Li, Jiabo Liu, Sen Wang, Xing Han
The Effect of Anisotropy on the Evolution of Subsurface Defects in Nickel-Based Single Crystal Superalloy Grinding at the Atomic Scale
- Original Research Article
Fang Yu, Jiachun Li
Microstructural Evolution and Comparative Crack Toughness Analysis of Boiler-Grade Stainless Steel 308L Processed by Wire Arc Additive Manufacturing
- Original Research Article
Dhinakaran Veeman, Pechimuthu Arumugaperumal, Kanishkaa Jeevaraj, Mohith Mohan Das, Bhavankumar Padmanaban, Micheal Agnelo Browne, Mohan Kumar Subramaniyan
Enhanced Tribological Performance in Simulated Body Fluid and Erosion Resistance of Plasma-Sprayed Hydroxyapatite Coatings Reinforced with Graphene Nanoplatelets
- Original Research Article
Swarnima Singh, Uma Batra, Dibya Singh Pradhan, Sisir Mantry, Anup Kumar Keshri
Enhanced Tensile Properties and Wear Resistance of a Fe-0.3C-5Mn-1.0Al Alloy Treated by Quenching and Partitioning
- Original Research Article
Feifan Zang, YanFei Pan, Chenzhu Wang, Jian Xu
Experimental Study of 3D-Printed Anchor Rods Corrosion in Simulated Mine Water
- Original Research Article
Xiaowu Ma, Mengtao Ren, Xusheng Zhang, Xuefeng Ji
The Influence of Microstructure on the Corrosion Damage Behavior and Electrochemical Properties of U75V Rail Materials
- Original Research Article
Chenggang He, Haiqiao Liu, Xinji Wang, Yunhui Wang, Jihua Liu, Youjie Chen, Jun Chen
Study on Corrosion Resistance of Plain High-Strength Bainite Steel in an Industrial Atmospheric Corrosion Environment
- Original Research Article
Long Xiaoyan, Wang Wanshuai, Zhu Ranran, Li Yingnan, Yang Yan, Tong Li, Liu Yunda, Li Yanguo, Wang Yifei
Different Impact of Dislocation Cellular Structures on Hydrogen Embrittlement Resistance in Metastable and Stable Additive Manufactured Austenitic Stainless Steels
- Original Research Article
Mingyan Sun, Yangyang Wang, Xianfeng Shen, Jie Chen, Yu Qin, Shuke Huang, Guowei Wang
Effect of Low-Angle Grain Boundaries on Tensile Properties of a Nickel-Based Superalloy at 900 °C
- Original Research Article
Qiao zhi Xu, Si qian Zhang, Ge Zhou, Hao yu Zhang, Dong Wang, Li jia Chen
Corrosion Resistance, Hydrogen Diffusion, and Trapping Behavior in Three Medium-Mn Advanced High-Strength Steels: A Comparative Study
- Original Research Article
Vikram Kumar S. Jain, Yoganandan Govindaraj, Lakshman Neelakantan, V. Subramanya Sarma
Corrosion Behavior of GO-Reinforced Multilayer Al6061 Composite Fabricated by Accumulative Roll Bonding
- Original Research Article
Vijay Pratap Singh, Gaurav Kumar Gupta, Srinibash Mishra
Effect of Silicon Carbide and Titanium Carbide on Microstructure, Mechanical Properties and Corrosion Behavior of Hybrid Copper Matrix Composites Fabricated through Powder Metallurgy Technique
- Original Research Article
Mariadoss Melwin Jagadeesh Sridhar, M. Ravichandran, V. Mohanavel, N. Radhika
Regression-Driven Optimization of Vat Photopolymerization-Based 3D Printing Parameters for Improved Mechanical Properties
- Original Research Article
Deepak Kumar, Ranjan Jha
Evaluation of Microstructural Homogeneity and Mechanical Property Uniformity in 718 Mold Steel via Water Immersion Ultrasonic Characterization
- Original Research Article
Jiazheng Jiang, Anmin Yin, Zhi Xu, Wenchao Liao
Influence of Grain Structure on Intergranular Corrosion Behavior of 2050 Al-Li Alloy by Changing the Direction of Pre-deformation
- Open Access
- Original Research Article
Guofu Xu, Jingyun Fu, Haoran Li, Mengjiao Liu, Xiaoyan Peng, Lei Tang, Yao Li
Development of Ti-Zr Alloys Fabricated by Reactive Spark Plasma Sintering for Implant Applications
- Open Access
- Original Research Article
Seok-june Seo, Tomoyuki Fujii, Yoshinobu Shimamura
Evaluation of the Hot Working Parameters of AD730 Ni-Based Superalloy Using a Constitutive Model and Processing Map
- Original Research Article
Z. Mirzaie, G. R. Ebrahimi, H. R. Ezatpour
Effect of Quenching and Partitioning Treatment on Microstructure and Mechanical Properties of 301 Stainless Steel
- Original Research Article
Sha Wang, Jinshang Ni
Performance Evaluation of GnP-ZrO2 Hybrid Nanofluids in Turning GH4169 Based on RSM
- Original Research Article
Jinhao Ma, Enzhao Cui, Guangming Zheng, Xiang Cheng, Lei Gu, Wei Li
The Mechanism and Evolution of Interface by Introducing Multi-Directional Stresses for 5A90 Al-Li Alloy Diffusion Bonding
- Original Research Article
Yidi Gao, Zhen Lu, Chengcheng Shi, Chengcai Zhang, Chengqian Huang, Shaosong Jiang
Built-up-edge Formation and its Effect on Surface Topography and Machinability Indicators in Sustainable Minimum Quantity Lubrication Turning of Al2024-T6
- Original Research Article
Mustafa Kuntoğlu, Rüstem Binali, Havva Demirpolat, Mayur Makhesana
Performance and Environmental Analysis on Additive-Manufacturing-Assisted Investment Casting of SS 316L Manifold Part Using Life Cycle Assessment
- Original Research Article
Intan Mardiono, Imang Eko Saputro, Zhi-Xian Dong, Cheng-Fu Huang, Yu-Chen Liu, Sheng-Chan Lee, Chih-Chi Wang, Chien-Wei Chan, Yiin-Kuen Fuh
Resistance Spot Welding (RSW) of Dual-Phase (DP590) Steel
- Original Research Article
Vimal Singh, Manish M. Pande, K. Bhanumurthy, Vikram Chavan, Indradev Samajdar
Effect of Casting Temperature on the Wettability and Interfacial Reaction between 4716CC2 Superalloy and Ceramic Shell
- Original Research Article
Qiongyuan Zhang, Qiang Yang, Atao Yang, Yingxin Wang, Lin Wu, Haiyang Song, Yu Fang, Qingyan Xu
Effect of Processing Path on Microstructure and Uniform Deformation of Al-Mg-Si Alloy Sheet
- Original Research Article
Jilong Ran, Jingwei Zhao, Zhenshan Liu, Pizhi Zhao, Xiaocheng Shi, Xueguang Dong, Kangcai Yu, Kaixin Chen, Meng Liu, Rui Wang, Qingfeng Zhu, Qichi Le
Static Recrystallization Behavior of Ultrahigh-Purity AISI 316L Stainless Steel
- Original Research Article
Hui Luo, Jianyin Weng, Tong Li, Junjie Cheng, Zhanjiang Gao, Jia Wu, Xiangyu Xu
Effects of Zn Addition on Electrochemical Behavior of Sn-5Sb-xZn Lead-Free Solder Alloy in 3.5 wt.% NaCl Solution
- Original Research Article
Anju Kaushal, Mukesh Raushan Kumar
Correction to: Effects of Zn Addition on Electrochemical Behavior of Sn-5Sb-xZn Lead-Free Solder Alloy in 3.5 wt.% NaCl Solution
- Correction
Anju Kaushal, Mukesh Raushan Kumar
Effect of Heating Duration on Microstructure and Properties of Cu-Steel Bimetallic Composite Cylinder Block
- Original Research Article
Xiaoling Qi, Yahui Han, Xiaolin Yang, Yan Wang, Ailong Jiang, Guoxiang Li
Corrosion Resistance and Fatigue Life of Al 7075 Parts Prepared by High-Rate Additive Fiction Stir Deposition
- Open Access
- Original Research Article
Ehsan Bagheri, Noushin Adibi, Peyton Wilson, Michael Talachian, Huan Ding, Michael Khonsari, Shengmin Guo
