Ausgabe 1/2016
50th Anniversary Issue with a Preface by Mark Aindow
Inhalt (46 Artikel)
Review: Overcoming the paradox of strength and ductility in ultrafine-grained materials at low temperatures
Praveen Kumar, Megumi Kawasaki, Terence G. Langdon
Review: achieving superplastic properties in ultrafine-grained materials at high temperatures
Megumi Kawasaki, Terence G. Langdon
Nanostructured Al and Cu alloys with superior strength and electrical conductivity
M. Yu Murashkin, I. Sabirov, X. Sauvage, R. Z. Valiev
A review of phase equilibria in Heusler alloy systems containing Fe, Co or Ni
Ming Yin, John Hasier, Philip Nash
On the initiation, growth, and coarsening of discontinuous precipitation in Cu-10 at.%Co alloy
N. M. Suguihiro, I. G. Solórzano
Compressibility of hierarchic-architectured agglomerates of hydrogen-reduced copper nanopowders
Dong-Hyun Ahn, Wooyeol Kim, Eun Yoo Yoon, Hyoung Seop Kim
The origins of chemomechanical effects in the low-load indentation hardness and tribology of ceramic materials
Steve J. Bull, Noushin Moharrami, Sarah V. Hainsworth, Trevor F. Page
Stabilization of the high-temperature and high-pressure cubic phase of ZnO by temperature-controlled milling
C. S. Tiwary, D. Vishnu, A. K. Kole, J. Brahmanandam, D. R. Mahapatra, P. Kumbhakar, K. Chattopadhyay
Allotropic phase transformation and photoluminescence of germanium nanograins processed by high-pressure torsion
Yoshifumi Ikoma, Takamitsu Toyota, Yoshimasa Ejiri, Katsuhiko Saito, Qixin Guo, Zenji Horita
Electron microscopy observations of the spinel-forming reaction using MgO nanocubes on Al2O3 substrates
Jonathan P. Winterstein, M. Sezen, A. Rečnik, C. Barry Carter
ALCHEMI studies of site occupancies in Cr-, Ni-, and Fe-substituted manganese cobaltite spinels
Louis V. Gambino, Alex B. Freeman, Neal J. Magdefrau, Mark Aindow
In situ X-ray synchrotron tomographic imaging during the compression of hyper-elastic polymeric materials
Brian M. Patterson, Nikolaus L. Cordes, Kevin Henderson, Jason J. Williams, Tyler Stannard, Sudhanshu S. Singh, Angel Rodriguez Ovejero, Xianghui Xiao, Mathew Robinson, Nikhilesh Chawla
Processing-structure–property relationships of novel fibrous filters produced by a melt-process
Jia Wang, Ravi Ayyar, Andrew Olah, Eric Baer
Aerosol filtration using electrospun cellulose acetate fibers
Saptarshi Chattopadhyay, T. Alan Hatton, Gregory C. Rutledge
Orientation of cellulose nanocrystals in electrospun polymer fibres
N. D. Wanasekara, R. P. O. Santos, C. Douch, E. Frollini, S. J. Eichhorn
The degree of crystalline orientation as a function of draw ratio in semicrystalline polymers: a new model based on the geometry of the crystalline chain slip mechanism
B. Bandeira, E. L. V. Lewis, D. C. Barton, I. M. Ward
Fast-curing epoxy polymers with silica nanoparticles: properties and rheo-kinetic modelling
A. Keller, K. Masania, A. C. Taylor, C. Dransfeld
Viscoelastic properties and melt rheology of novel polyamide 6/fluoroelastomer nanostructured thermoplastic vulcanizates
Shib Shankar Banerjee, Anil K. Bhowmick
Erosive and sliding wear of polybenzimidazole at elevated temperatures
S. Sharma, E. Padenko, J. Bijwe, B. Wetzel, K. Friedrich
A review of hydrogel-based composites for biomedical applications: enhancement of hydrogel properties by addition of rigid inorganic fillers
Stefanie Utech, Aldo R. Boccaccini
Stochastic factors controlling the failure of carbon/epoxy composites
H. Y. Chou, A. Thionnet, A. Mouritz, A. R. Bunsell
Effects of thermal residual stress on interfacial properties of polyphenylene sulphide/carbon fibre (PPS/CF) composite by microbond test
Xiaojun Wang, Dongxia Xu, Hong-Yuan Liu, Helezi Zhou, Yiu-Wing Mai, Jie Yang, Eric Li
Interfacial and internal stress transfer in carbon nanotube based nanocomposites
Robert J. Young, Libo Deng, Tamer Z. Wafy, Ian A. Kinloch
Effect of interfacial area on densification and microstructural evolution in silicon carbide–boron carbide particulate composites
Tom Williams, Julie Yeomans, Paul Smith, Andrew Heaton, Chris Hampson
The performance of austenitic and duplex stainless steels in cracked concrete exposed to concentrated chloride brine
C. B. Van Niejenhuis, S. Walbridge, C. M. Hansson
Aluminum hydroxide multilayer assembly capable of extinguishing flame on polyurethane foam
Merid Haile, Sandra Fomete, Ilse D. Lopez, Jaime C. Grunlan
Review: grain boundary faceting–roughening phenomena
B. B. Straumal, O. A. Kogtenkova, A. S. Gornakova, V. G. Sursaeva, B. Baretzky
Factors affecting the dissociation width of dissociated dislocations in FCC metals and alloys
Hiroyasu Saka
The role of reactivity in wetting by liquid metals: a review
N. Eustathopoulos, R. Voytovych
Grain boundary segregation in Al–Mn electrodeposits prepared from ionic liquid
Ting-Yun Huang, Christopher J. Marvel, Patrick R. Cantwell, Martin P. Harmer, Christopher A. Schuh
Quantitative correlation of interfacial contamination and antiphase domain boundary density in GaAs on Si(100)
C. S. C. Barrett, A. G. Lind, X. Bao, Z. Ye, K. Y. Ban, P. Martin, E. Sanchez, Y. Xin, K. S. Jones
Stress-assisted removal of conjugation boundaries in non-modulated Ni–Mn–Ga by coordinated secondary twinning
B. Muntifering, L. Kovarik, N. D. Browning, R. C. Pond, W. B. Knowlton, P. Müllner
The mechanism of grain boundary motion in SrTiO3
Hadas Sternlicht, Wolfgang Rheinheimer, Michael J. Hoffmann, Wayne D. Kaplan
Hardening in non-stoichiometric (1 − x)Bi0.5Na0.5TiO3–xBaTiO3 lead-free piezoelectric ceramics
Sasiporn Prasertpalichat, David P. Cann
Low-voltage ferroelectric–paraelectric superlattices as gate materials for field-effect transistors
I. B. Misirlioglu, C. Sen, M. T. Kesim, S. P. Alpay
Are ferroelectric multilayers capacitors in series?
F.-C. Sun, M. T. Kesim, Y. Espinal, S. P. Alpay
Charge injection barriers at metal/polyethylene interfaces
Lihua Chen, Tran Doan Huan, Yenny Cardona Quintero, Rampi Ramprasad
Magnetic nanoparticles: material engineering and emerging applications in lithography and biomedicine
Yuping Bao, Tianlong Wen, Anna Cristina S. Samia, Amit Khandhar, Kannan M. Krishnan
Electrochemical interaction between graphite and molten salts to produce nanotubes, nanoparticles, graphene and nanodiamonds
Ali Reza Kamali, Derek Fray
Growth mechanism of one dimensional tin nanostructures by electrodeposition
Craig D. Owen, M. Grant Norton
TEM in situ lithiation of tin nanoneedles for battery applications
Matthew T. Janish, David T. Mackay, Yang Liu, Katherine L. Jungjohann, C. Barry Carter, M. Grant Norton
Pd-based nanoflowers catalysts: controlling size, composition, and structures for the 4-nitrophenol reduction and BTX oxidation reactions
Anderson G. M. da Silva, Thenner S. Rodrigues, Laís S. K. Taguchi, Humberto V. Fajardo, Rosana Balzer, Luiz F. D. Probst, Pedro H. C. Camargo
Metallic muscles and beyond: nanofoams at work
Eric Detsi, Sarah H. Tolbert, S. Punzhin, Jeff Th. M. De Hosson