Ausgabe 10/2007
Special Section:Size-Dependent Effects in Materials for Environmental Protection and Energy Application; Guest Editor: Radostina Stoyanova
Inhalt (56 Artikel)
Particle size effects in Rh/Al2O3 catalysts as viewed from a structural, functional, and reactive perspective: the case of the reactive adsorption of NO
Mark A. Newton, Andrew J. Dent, Steven G. Fiddy, Bhrat Jyoti, John Evans
Oxidation of gold metal particles supported on TiO2: an FTIR study by means of low-temperature CO adsorption
Hr. Klimev, K. Fajerwerg, K. Chakarova, L. Delannoy, C. Louis, K. Hadjiivanov
Effects of morphology and cesium promotion over silver nanoparticles catalysts in the styrene epoxidation
Ricardo José Chimentao, Francesc Medina, Jesús Eduardo Sueiras, José Luís García Fierro, Yolanda Cesteros, Pilar Salagre
Particle size and support effects on the complete benzene oxidation by Co and Co–Pt catalysts
Silviya Todorova, Georgi Kadinov, Krasimir Tenchev, Yuri Kalvachev, Vladislav Kostov-Kytin
Effect of preparation technique on the properties of Mo-containing Al-MCM-41
Nina Georgieva Kostova, Elka Kraleva, Alla A. Spojakina, Erika Godocikova, Peter Balaz
Surface modification of macroporous glycidyl methacrylate based copolymers for selective sorption of heavy metals
Ljiljana Malović, Aleksandra Nastasović, Zvjezdana Sandić, Jelena Marković, Dragana Đorđević, Zorica Vuković
Hydriding properties of the nanocomposite 85 wt.% Mg–15 wt.% Mg2Ni0.8Co0.2 obtained by ball milling
Maria Khrussanova, Tsveta Mandzhukova, Eli Grigorova, Mitko Khristov, Pavel Peshev
EPR analysis of the local structure of Ni3+ ions in Ni-based electrode materials obtained under high-pressure
Ekaterina Zhecheva, Radostina Stoyanova, Elitza Shinova
Influence of the synthesis methods on the particle size of the LiVMoO6 phase
Margarita Milanova, Reni Iordanova, Yanko Dimitriev, Krassimir Kostov, Sasho Vassilev
Iron-based composite oxides as alternative negative electrodes for lithium-ion batteries
I. Uzunov, S. Uzunova, D. Kovacheva, S. Vasilev, B. Puresheva
Tin-based amorphous and composite materials
Ekaterina Popova, Yanko Dimitriev
Effects of nickel foam dimensions on catalytic activity of supported Co–Mn–B nanocomposites for hydrogen generation from stabilized borohydride solutions
Mario Mitov, Rashko Rashkov, Nikolay Atanassov, Andreas Zielonka
Sol–gel preparation and characterization of perovskite lanthanum lithium titanate
Ionela Carazeanu Popovici, Elisabeta Chirila, Viorica Popescu, Victor Ciupina, Gabriel Prodan
Nanoparticles in low melting amorphous selenite materials
Albena Bachvarova-Nedelcheva, Reni Iordanova, Yanko Dimitriev, Elena Kashchieva
Polycrystalline materials in MoO3–ZrO2–V2O5 system
M. Markova-Velichkova, R. Iordanova, A. Stoyanova, Y. Dimitriev, D. Klissurski
Synthesis of EVA-g-MAH and its compatibilization effect to PA11/PVC blends
Tao Wang, Dan Liu, Chuanxi Xiong
Carbon based conductive polymer composites
Wei Zhang, Abbas A. Dehghani-Sanij, Richard S. Blackburn
Microscopic structural evolution in terms of porosity in high-Tc superconductors
Nasr-Eddine Chakri, Abdelaziz Benaldjia, Abdelaziz Amara, Mohamed Rida Benloucif, Mohamed Guerioune
Study on the thermal expansion properties of C/C composites
Xiaoling Liao, Hejun Li, Wenfeng Xu, Kezhi Li
A gas phase analysis technique applied to in-situ studies of gas–solid interactions
Clara Anghel, Qian Dong
Preparation and characterization of cerium oxide templated from activated carbon
Mark Crocker, Uschi M. Graham, Rolando Gonzalez, Gary Jacobs, Erin Morris, Aurora M. Rubel, Rodney Andrews
A review of sealing technologies applicable to solid oxide electrolysis cells
Paul A. Lessing
SiCf/SiC composites reinforced by randomly oriented chopped fibers prepared by semi-solid mechanical stirring method and hot pressing
X. H. Qin, B. L. Xiao, S. M. Dong, D. L. Jiang
Production of natural carotene-dispersed polymer microparticles by SEDS-PA co-precipitation
Wenzhi He, Quanling Suo, Hailong Hong, A Shan, Chunping Li, Yanchun Huang, Yunxia Li, Mingda Zhu
Preparation and characterisation of controlled porosity alginate hydrogels made via a simultaneous micelle templating and internal gelation process
S. Partap, A. Muthutantri, I. U. Rehman, G. R. Davis, J. A. Darr
Contact damage initiation in silicon nitride in Hertzian indentation: role of microstructure
Guang-Yong Lin, Ramaswamy Lakshminarayanan, Dinesh K. Shetty
Enhancement of the generating power in Cu/Bi–Te/Cu composite thermoelectric devices
Osamu Yamashita, Hirotaka Odahara
Adhesion along metal–polymer interfaces during plastic deformation
R. van Tijum, W. P. Vellinga, J. Th. M. De Hosson
Dynamic formation of zircon during high temperature deformation of zirconia–silica composites with alumina additions
R. Peter Dillon, Martha L. Mecartney
Microstructure and properties of lead-free (Bi1/2Na1/2)TiO3 based piezoelectric ceramics doped with different cations
Zhengbo Yu, Vladimir D. Krstic, Binu K. Mukherjee
Effect of crystal orientation on the ductility in AZ31 Mg alloy sheets produced by equal channel angular rolling
Yong Qi Cheng, Zhen Hua Chen, Wei Jun Xia
Synthesis of monophasic Ce0.5Zr0.5O2 solid solution by microwave-induced combustion method
Benjaram M. Reddy, Gunugunuri K. Reddy, Ataullah Khan, Ibram Ganesh
Effect of temperature and surface roughness on the wettability of boron nitride by molten Al
Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi
Strain analysis of a GaN epilayer grown on a c-plane sapphire substrate with different growth times
S. I. Cho, K. Chang, Myoung Seok Kwon
Acoustic emission inspection of Portevin-Le Chatelier effect and deformation mechanisms of two Mg–Li–Al alloys
Cong Wang, Zhuoqun Li, Yongbo Xu, Enhou Han
Synthesis and microstructure of SrTiO3 and BaTiO3 ceramics by a reaction-sintering process
Yi-Cheng Liou, Chi-Ting Wu, Tzu-Chin Chung
Structural analysis of electrodeposited copper microstructures fabricated through template synthesis
Raminder Kaur, N. K. Verma, S. K. Chakarvarti
Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach
Vivian W. Y. Tam, C. M. Tam
X-Ray diffraction and mössbauer spectra of nickel ferrite prepared by combustion reaction
M. A. F. Ramalho, L. Gama, S. G. Antonio, C. O. Paiva-Santos, E. J. Miola, R. H. G. A. Kiminami, A. C. F. M. Costa
Characterization and wear resistance of laser surface cladding AZ91D alloy with Al + Al2O3
Yao Jun, G. P. Sun, C. Liu, S. Q. Jia, S. J. Fang, S. S. Jia
Preparation, characterization, conductivity and thermal expansion studies of Ca0.5SbMP3O12 (M = Al, Fe, Cr)
G. Rambabu, K. Koteswara Rao, N. Anantharamulu, M. Raghavender, G. Prasad, V. Prashanth Kumar, C. Vishnuvardhan Reddy, Muga Vithal
Synthesis of anisometric KSr2Nb5O15 particles in the SrNb2O6–Nb2O5–KCl system
Zupei Yang, Lingling Wei, Yunfei Chang, Bing Liu
Mechanical properties and rheology of polyalkenoate cements using various low-cost fillers
Diego A. Acosta, Gary P. Funkhouser, Brain P. Grady
Prediction of enthalpy of formation and Gibbs energy change in pseudo-binary (Ti–Zr)(Fe–Cr)2 and pseudo-ternary (Ti–Zr)(Fe–Cr)2-H system using extended Miedema model
S. Bera, S. Mazumdar, M. Ramgopal, S. Bhattacharyya, I. Manna
The effect of Ti4+ ions and gamma radiation on the structure and electrical properties of Mg ferrite
M. A. Ahmed, E. Ateia, F. M. Salem
Temperature and dwell time effect on hardness of Al-base alloys
F. Abd El-Salam, L. A. Wahab, R. H. Nada, H. Y. Zahran
Effect of Li/Nb ratio on structure and photorefractive properties of Zn:Fe:LiNbO3 crystals
X. H. Zhen, Q. Li, L. C. Zhao, Y. H. Xu
Characterisation of epoxy/BaTiO3 composites processed by dipping for integral capacitor films (ICF)
Leandro Alfredo Ramajo, Maria Marta Reboredo, Miriam Susana Castro
Synthesis of nanoporous carbons by an in situ template approach
Li Zhang, Jian-nong Wang, Jun-jie Niu