Skip to main content
main-content

Zeitschrift

Journal of Materials Science

Journal of Materials Science 12/2018

Ausgabe 12/2018

Inhaltsverzeichnis ( 54 Artikel )

06.02.2018 | Review | Ausgabe 12/2018

A review of the preparation and application of magnetic nanoparticles for surface-enhanced Raman scattering

Huasheng Lai, Fugang Xu, Li Wang

15.02.2018 | Review | Ausgabe 12/2018

Recent progress in the modification of carbon materials and their application in composites for electromagnetic interference shielding

Ahsan Nazir, Haojie Yu, Li Wang, Muhammad Haroon, Raja Summe Ullah, Shah Fahad, Kaleem-ur-Rahman Naveed, Tarig Elshaarani, Amin Khan, Muhammad Usman

20.02.2018 | Review | Ausgabe 12/2018

Oxide-based RRAM materials for neuromorphic computing

XiaoLiang Hong, Desmond JiaJun Loy, Putu Andhita Dananjaya, Funan Tan, CheeMang Ng, WenSiang Lew

12.03.2018 | Review | Ausgabe 12/2018

Progress in Ni-based anode materials for direct hydrocarbon solid oxide fuel cells

Kangwei Wei, Xinxin Wang, Riyan Achmad Budiman, Jianhong Kang, Bin Lin, Fubao Zhou, Yihan Ling

12.03.2018 | Biomaterials | Ausgabe 12/2018

Synthesis of bactericidal polymer coatings by sequential plasma-induced polymerization of 4-vinyl pyridine and gas-phase quaternization of poly-4-vinyl pyridine

Martha Hernández-Orta, Elías Pérez, Luis Emilio Cruz-Barba, Marco A. Sánchez-Castillo

13.03.2018 | Biomaterials | Ausgabe 12/2018

The oxidase-like activity of hemin encapsulated by single-ring GroEL mutant and its application for colorimetric detection

Xiaoqiang Wang, Baomei Xu, Zhenzhen Liu

21.03.2018 | Biomaterials | Ausgabe 12/2018

Cell attachment/detachment behavior on poly(N-isopropylacrylamide)-based microgel films: the effect of microgel structure and swelling ratio

Yongqing Xia, Dachao Tang, Han Wu, Xiaojuan Wang, Meiwen Cao, Hua He, Shengjie Wang

19.03.2018 | Biomaterials | Ausgabe 12/2018

Enhanced dielectric constant and structural transformation in Fe-doped hydroxyapatite synthesized by wet chemical method

Brajendra Singh, Aditya Tandon, Anand K. Pandey, Priyanka Singh

19.03.2018 | Ceramics | Ausgabe 12/2018

Synthesis and characterization of Ti-doped ZrSiO4 at ambient and high-pressure conditions

S. Ferrari, F. Grinblat, V. Bilovol, L. G. Pampillo, F. D. Saccone, D. Errandonea, C. M. Chanquía

06.03.2018 | Ceramics | Ausgabe 12/2018

Studies of structural, optical, and electrical properties associated with defects in sodium-doped copper oxide (CuO/Na) nanostructures

Hafsa Siddiqui, Mohammad Ramzan Parra, M. S. Qureshi, M. M. Malik, Fozia Z. Haque

05.03.2018 | Ceramics | Ausgabe 12/2018

Dual relaxation behaviors and large electrostrictive properties of Bi0.5Na0.5TiO3–Sr0.85Bi0.1TiO3 ceramics

Jun Wang, Changrong Zhou, Qingning Li, Weidong Zeng, Jiwen Xu, Guohua Chen, Changlai Yuan, Guanghui Rao

23.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Graphene/PANI hybrid film with enhanced thermal conductivity by in situ polymerization

Jie Miao, Haoliang Li, Hanxun Qiu, Xian Wu, Junhe Yang

19.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Anionic NbO-type copper organic framework decorated with carboxylate groups for light hydrocarbons separation under ambient conditions

Xiuping Liu, Xue Li, Jing Li, Guixia Li, Sheng Guo, Houyu Zhu, Lianming Zhao, Chunlian Hao, Wenyue Guo

15.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Enhanced performance of GaN-based LEDs via electroplating of a patterned copper layer on the backside

Wael Z. Tawfik, Gil Yong Hyun, Seong Jea Lee, Sang-Wan Ryu, Jun-Seok Ha, June Key Lee

05.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Biocompatible nanoclusters of O-carboxymethyl chitosan-coated Fe3O4 nanoparticles: synthesis, characterization and magnetic heating efficiency

P. H. Linh, N. V. Chien, D. D. Dung, P. H. Nam, D. T. Hoa, N. T. N. Anh, L. V. Hong, N. X. Phuc, P. T. Phong

08.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Removal and reuse of Ag nanoparticles by magnetic polyaniline/Fe3O4 nanofibers

Qi Yang

09.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Synthesis and application of a novel environmental C26 diglycidyl ester plasticizer based on castor oil for poly(vinyl chloride)

Jie Chen, Zengshe Liu, Xiaoan Nie, Jianchun Jiang

14.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Graphdiyne-hybridized N-doped TiO2 nanosheets for enhanced visible light photocatalytic activity

Yuze Dong, Yanming Zhao, Yanhuan Chen, Yaqing Feng, Mengyao Zhu, Chenggong Ju, Bao Zhang, Huibiao Liu, Jialiang Xu

19.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Synthesis of Rh nanoparticles in alcohols: magnetic and electrocatalytic properties

E. Ramírez-Meneses, K. Philippot, M. A. Domínguez-Crespo, M. Ibrahim, I. Betancourt, A. M. Torres-Huerta, A. Ezeta-Mejia

19.03.2018 | Chemical routes to materials | Ausgabe 12/2018

Urea-assisted synthesis of amorphous molybdenum sulfide on P-doped carbon nanotubes for enhanced hydrogen evolution

Hongzhi Wang, Haibin Zhou, Weiguo Zhang, Suwei Yao

05.03.2018 | Composites | Ausgabe 12/2018

Effects of POSS functionalization of carbon nanotubes on microstructure and thermomechanical behavior of carbon nanotube/polymer nanocomposites

Seyed Morteza Sabet, Hassan Mahfuz, Andrew C. Terentis, Majid Nezakat, Javad Hashemi

09.03.2018 | Composites | Ausgabe 12/2018

High thermal conductivity of diamond/copper composites produced with Cu–ZrC double-layer coated diamond particles

Yanpeng Pan, Xinbo He, Shubin Ren, Mao Wu, Xuanhui Qu

09.03.2018 | Composites | Ausgabe 12/2018

Sintering and tribomechanical properties of gel-combustion-derived nano-alumina and its composites with carbon nanotubes

Rupa Halder, Soumya Sarkar, Siddhartha Bandyopadhyay, Pravash C. Chakraborti

06.03.2018 | Composites | Ausgabe 12/2018

Highly flexible electrospun carbon/graphite nanofibers from a non-processable heterocyclic rigid-rod polymer of polybisbenzimidazobenzophenanthroline-dione (BBB)

Jian Zhu, Yichun Ding, Xiaojian Liao, Wenhui Xu, Hean Zhang, Haoqing Hou

08.03.2018 | Composites | Ausgabe 12/2018

Properties of microinjection-molded multi-walled carbon nanotubes-filled poly(lactic acid)/poly[(butylene succinate)-co-adipate] blend nanocomposites

Shengtai Zhou, Andrew N. Hrymak, Musa R. Kamal

19.03.2018 | Composites | Ausgabe 12/2018

Preparation of fabric strain sensor based on graphene for human motion monitoring

Hanna Lee, Mary J. Glasper, Xinda Li, John A. Nychka, Jane Batcheller, Hyun-Joong Chung, Yi Chen

09.03.2018 | Composites | Ausgabe 12/2018

Design of spinous Ni/N-GN nanocomposites as novel magnetic/dielectric microwave absorbents with high-efficiency absorption performance and thin thickness

Linxue Zhang, Yan Zong, Zhaoxin Li, Kexun Huang, Yong Sun, Yingying Lan, Hongjing Wu, Xinghua Li, Xinliang Zheng

13.03.2018 | Composites | Ausgabe 12/2018

Integration of NiWO4 and Fe3O4 with graphitic carbon nitride to fabricate novel magnetically recoverable visible-light-driven photocatalysts

Mitra Mousavi, Aziz Habibi-Yangjeh

23.03.2018 | Computation | Ausgabe 12/2018

Density functional theory study of electronic structure of defects and the role on the strain relaxation behavior of MoS2 bilayer structures

Jin Wang, Avinash M. Dongare

20.03.2018 | Computation | Ausgabe 12/2018

Water vapour permeation through high barrier materials: numerical simulation and comparison with experiments

A. Batard, E. Planes, T. Duforestel, L. Flandin, B. Yrieix

15.03.2018 | Electronic materials | Ausgabe 12/2018

Enhanced thermoelectric performance of bismuth-doped magnesium silicide synthesized under high pressure

Jianghua Li, Xiaopu Li, Chen Chen, Wentao Hu, Fengrong Yu, Zhisheng Zhao, Long Zhang, Dongli Yu, Yongjun Tian, Bo Xu

08.03.2018 | Electronic materials | Ausgabe 12/2018

Characterization of quaternary Zn/Sn-codoped GaN films obtained with Zn x Sn0.04GaN targets at different Zn contents by the RF reactive magnetron sputtering technology

Dong-Hau Kuo, Yen-Tzu Liu

12.03.2018 | Electronic materials | Ausgabe 12/2018

Simultaneous optimization of Seebeck, electrical and thermal conductivity in free-solidified Bi0.4Sb1.6Te3 alloy via liquid-state manipulation

Na Gao, Bin Zhu, Xiao-yu Wang, Yuan Yu, Fang-qiu Zu

12.03.2018 | Electronic materials | Ausgabe 12/2018

Effect of annealing on microstructure and thermoelectric properties of hot-extruded Bi–Sb–Te bulk materials

Zhi-Lei Wang, Takehiro Araki, Tetsuhiko Onda, Zhong-Chun Chen

15.03.2018 | Electronic materials | Ausgabe 12/2018

Enhanced metal–insulator transition in V2O3 by thermal quenching after growth

J. Trastoy, Y. Kalcheim, J. del Valle, I. Valmianski, Ivan K. Schuller

19.03.2018 | Electronic materials | Ausgabe 12/2018

Synthesis and characterization of carbon-modified Li2MnP2O7/C composites prepared by spray pyrolysis

Heechan Jang, Koji Miyasaka, Izumi Taniguchi

19.03.2018 | Electronic materials | Ausgabe 12/2018

Effects of TiO2 nanoparticle size and concentration on dielectric properties of polypropylene nanocomposites

Michael D. Womble, Juan Herbsommer, Yun-Ju Lee, Julia W. P. Hsu

13.03.2018 | Energy materials | Ausgabe 12/2018

Cagelike porous sulfonated polystyrene@polyaniline composite microspheres for high-performance supercapacitor

Hanhong Huang, Jianhua Lu, Mozhen Wang, Xuewu Ge

19.03.2018 | Energy materials | Ausgabe 12/2018

Reduced graphene oxide/Fe-phthalocyanine nanosphere cathodes for lithium-ion batteries

Dongxu He, Weidong Xue, Rui Zhao, Wencheng Hu, Alexander J. Marsden, Mark A. Bissett

06.03.2018 | Energy materials | Ausgabe 12/2018

Surface passivation with nitrogen-doped carbon dots for improved perovskite solar cell performance

Yifang Wang, Jie Zhang, Shuhuang Chen, Haoyu Zhang, Ligui Li, Zhiyong Fu

21.03.2018 | Energy materials | Ausgabe 12/2018

High-performance supercapacitors based on porous activated carbons from cattail wool

Xiao-Li Su, Shuai Jiang, Guang-Ping Zheng, Xiu-Cheng Zheng, Jing-He Yang, Zhong-Yi Liu

19.03.2018 | Energy materials | Ausgabe 12/2018

One-pot hydrothermal fabrication and enhanced lithium storage capability of SnO2 nanorods intertangled with carbon nanotubes and graphene nanosheets

Qinxing Xie, Yating Zhu, Peng Zhao, Yufeng Zhang, Shihua Wu

05.03.2018 | Metals | Ausgabe 12/2018

Effect of rolling temperature on the microstructure, texture, and magnetic properties of strip-cast grain-oriented 3% Si steel

Feng Fang, Xiang Lu, Mengfei Lan, Yuanxiang Zhang, Yang Wang, Guo Yuan, Guangming Cao, Yunbo Xu, R. D. K. Misra, Guodong Wang

09.03.2018 | Metals | Ausgabe 12/2018

Thermodynamic properties of Ag–Au–Pd alloys measured by a solid-state EMF method

Imam Santoso, Pekka Taskinen

05.03.2018 | Metals | Ausgabe 12/2018

Experimental investigation of the isothermal section of the Mg–Ni–Y system with LPSO phases at 400 °C

Kai Xu, Shuhong Liu, Dandan Huang, Yong Du

13.03.2018 | Metals | Ausgabe 12/2018

Effects of plastic straining on the corrosion resistance of TRIP-aided lean duplex stainless steels

Yan Zhao, Yuan Wang, Xin Li, Weina Zhang, Shuai Tang, Zhenyu Liu

08.03.2018 | Metals | Ausgabe 12/2018

Microstructural comparison of friction-stir-welded aluminum alloy 7449 starting from different tempers

N. Martinez, N. Kumar, R. S. Mishra, K. J. Doherty

09.03.2018 | Metals | Ausgabe 12/2018

Microstructure evolution and mechanical reliability of Cu/Au–Sn/Cu joints during transient liquid phase bonding

J. Peng, H. S. Liu, H. B. Ma, X. M. Shi, R. C. Wang

12.03.2018 | Metals | Ausgabe 12/2018

Sintering aluminum alloy powder using direct current electric fields at room temperature in seconds

Brandon McWilliams, Jian Yu, Frank Kellogg

23.03.2018 | Metals | Ausgabe 12/2018

Dynamic transformation of Ti–6Al–4V during torsion in the two-phase region

Baoqi Guo, S. L. Semiatin, John J. Jonas, Stephen Yue

15.03.2018 | Polymers | Ausgabe 12/2018

A study on generation of embossed carbon nanopattern by induced microdomain alignments in PAN-based block copolymer under electric field

Seokwon Joo, Bomyung Kim, Jaieun An, Minji Park, Soonmin Seo, Jeong Yong Park, Joonwon Bae

14.03.2018 | Polymers | Ausgabe 12/2018

An in situ silicone–silicone interpenetrating polymer network (IPN) with higher mechanical property, higher hydrophilicity, and lower protein adsorption

Yang Xie, Li Wang, Yan Zhang, Houbin Li, Ronghua Huang

13.03.2018 | Polymers | Ausgabe 12/2018

MoS2-filled coating on flexible polyurethane foam via layer-by-layer assembly technique: flame-retardant and smoke suppression properties

Haifeng Pan, Qi Shen, Zinan Zhang, Bihao Yu, Yushi Lu

19.03.2018 | Polymers | Ausgabe 12/2018

The study of damping property and mechanism of thermoplastic polyurethane/phenolic resin through a combined experiment and molecular dynamics simulation

Rui Zhou, Weiqiang Gao, Lichao Xia, Hong Wu, Shaoyun Guo

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise