Journal of Materials Science

Keyword contents

Acid aluminum phosphate for the binding and coating of materials

D. D. L. Chung

Mapping of thermoplastic elastomeric nitrile rubber/poly(styrene-co-acrylonitrile) blends using tapping mode atomic force microscopy and transmission electron microscopy

S. Anandhan, P. P. De, S. K. De, S. Bandyopadhyay, A. K. Bhowmick

Investigation on the electrophoretic deposition of a FGM piezoelectric monomorph actuator

Y. H. Chen, T. Li, J. Ma

Reaction-induced phase separation in an epoxy/low molecular weight solvent system

E. Soulé, M. García de la Mata, J. Borrajo, P. A. Oyanguren, M. J. Galante

Characterisation of K, Na, and Li birnessites prepared by oxidation with H2O2 in a basic medium. Ion exchange properties and study of the calcined products

O. Prieto, M. Del Arco, V. Rives

The ballistic impact characteristics of Kevlar® woven fabrics impregnated with a colloidal shear thickening fluid

Young S. Lee, E. D. Wetzel, N. J. Wagner

Laboratory studies of diffusion in bitumen using markers

R. Karlsson, U. Isacsson

Impedance spectroscopy in reinforced concrete: Procedure for monitoring steel corrosion Part I Development of the experimental device

O. Poupard, A. Aït-Mokhtar, P. Dumargue

Fatigue of Kaowool reinforced aluminum: Effect of shot particle wall thickness

A. Al-Ostaz, W. J. Baxter, I. Jasiuk

Hydro-abrasive erosion of refractory ceramics

A. W. Momber, R. Kovacevic

A preliminary study on laser assisted aluminum foaming

Y. P. Kathuria

Selective case hardening of plain steel by carbon alloying with a plasma transferred arc (PTA) technique

J. Nikolaou, L. Bourithis, G. Papadimitriou

Zinc hydroxystannate-coated metal hydroxide fire retardants: Fire performance and substrate-coating interactions

P. R. Hornsby, P. A. Cusack, M. Cross, A. Tóth, B. Zelei, G. Marosi

Preparation and electrochemical characterization of Sr- and Mn-doped LaGaO3 as anode materials for LSGM-based SOFCs

Qingxi Fu, Xingyan Xu, Dingkun Peng, Xingqin Liu, Guangyao Meng

Study on the synthesis and ion-exchange properties of layered titanate Na2Ti3O7 powders with different sizes

Juan Yang, Dan Li, Xin Wang, Xujie Yang, Lude Lu

Statistical analysis of the failure stresses of ceramic fibres: Dependence of the Weibull parameters on the gauge length, diameter variation and fluctuation of defect density

M.-H. Berger, D. Jeulin

Ageing characteristics of furnace cooled eutectoid Zn-Al based alloy

Y. H. Zhu, H. C. Man, H. J. Dorantes-Rosales, W. B. Lee

Hot shock compaction of nanocrystalline alumina

G. J. Venz, P. D. Killen, N. W. Page

Surface chemical analysis of 1,2,3,4-butanetetracarboxylic acid modified cotton

S. Shekarriz, P. Cohen, C. M. Carr, R. Mitchell, C. Jones

Solid state reactions of cordierite precursor oxides and effect of CaO doping on the thermal expansion behaviour of cordierite honeycomb structures

R. Johnson, I. Ganesh, B. P. Saha, G. V. Narasimha Rao, Y. R. Mahajan

Thermal stress distributions in axisymmetrically orthotropic fiber-reinforced composites with multilayered interfaces

L. H. You

Embrittlement of austempered ductile iron on contact with water—testing under applied potential

L. Masud, R. Martínez, S. Simison, R. Boeri

Coagulation/phase separation process in the silica/inorganic salt systems (1)—observation of state transformation—

K. Imaizumi, N. Matsuda, M. Otsuka

Heat treatment temperature effects on structural and electrochemical properties of PVDC-based disordered carbons

Chan Kim, Kap Seung Yang, Y. J. Kim, M. Endo

Review papers in Journal of Materials Science Volumes 36, 37, and 38