Journal of Materials Science

Contents by keyword

Syntactic and composite foams: Proceedings of an Engineering Conferences International (ECI) conference

G. M. Gladysz, K. K. Chawla

Structure and mechanical properties of micro and macro balloons: An overview of test techniques

K. B. Carlisle, K. K. Chawla, G. M. Gladysz, M. Koopman

Characterization of pore size of trimethylol propane triacrylate (TMPTA) polymer foam by pulsed sputter coating and SEM analysis

Douglas Faith, Colin J. Horsfield, Wigen Nazarov

Foaming binary solution mixtures of low molecular surfactant and polyelectrolyte

S. B. Aidarova, K. B. Musabekov, Z. B. Ospanova, M. Guden

Microstructure and compressive properties of carbon microballoons

K. B. Carlisle, M. Koopman, K. K. Chawla, R. Kulkarni, G. M. Gladysz, M. Lewis

Poly(D,L-lactide) (PDLLA) foams with TiO2 nanoparticles and PDLLA/TiO2-Bioglass® foam composites for tissue engineering scaffolds

Aldo R. Boccaccini, Jonny J. Blaker, Véronique Maquet, Wendy Chung, Robert Jérôme, Showan N. Nazhat

Microstructural failure modes in three-phase glass syntactic foams

M. Koopman, K. K. Chawla, K. B. Carlisle, G. M. Gladysz

Shear properties of CMB syntactic foam

G. M. Chávez, M. W. Lewis, L. R. Lenke

Blast impact response of aluminum foam sandwich composites

Rajan Sriram, Uday K. Vaidya, Jong-Eun Kim

Characterization of epoxy syntactic foams by dynamic mechanical analysis

S. Sankaran, K. Ravi Sekhar, Govinda Raju, M. N. Jagdish Kumar

Hydrolytic ageing of syntactic foams for thermal insulation in deep water: degradation mechanisms and water uptake model

V. Sauvant-Moynot, N. Gimenez, H. Sautereau

Dopeable styrenic foams used in inertial fusion targets

W. P. Steckle Jr., J. R. Schoonover, N. E. Lanier, A. Nobile

Experimental determination of the thermal conductivity of three-phase syntactic foams

V. S. Shabde, K. A. Hoo, G. M. Gladysz

SiC-particulate aluminum composite foams produced from powder compacts: foaming and compression behavior

M. Guden, S. Yüksel

Three-phase syntactic foams: structure-property relationships

G. M. Gladysz, B. Perry, G. Mceachen, J. Lula

The double-torsion testing technique for determination of fracture toughness and slow crack growth behavior of materials: A review

A. Shyam, E. Lara-Curzio

Ballistic fibers: A review of the thermal, ultraviolet and hydrolytic stability of the benzoxazole ring structure

G. A. Holmes, K. Rice, C. R. Snyder

Crystalline carbon nitride films prepared by microwave plasma chemical vapour deposition

Jinchun Jiang, Wenjuan Cheng, Yang Zhang, Hesun Zhu, Dezhong Shen

Development of vapor grown carbon fibers (VGCF) reinforced carbon/carbon composites

S. R. Dhakate, R. B. Mathur, T. L. Dhami

Luminescent properties of YAl3(BO3)4:Eu3+ phosphors

Hua Yang, Zhouyun Ren, Yuming Cui, Lianxiang Yu, Shouhua Feng

Effects of external electric field on microstructure and property of friction welded joint between copper and stainless steel

L. Fu, S. G. Du

Characterisation methods for functionally graded materials

G. Tomandl, M. Mangler, D. Stoyan, A. Tscheschel, Tu Bergakademie Freiberg, J. Goebbels, G. Weidemann

Direct ink-jet printing and low temperature conversion of conductive silver patterns

P. J. Smith, D.-Y. Shin, J. E. Stringer, B. Derby, N. Reis

Hydroxyapatite forming ability of electrostatic spray pyrolysis derived calcium phosphate nano powder

Kyu-Seog Hwang, Kyung-Ok Jeon, Young-Sun Jeon, Byung-Hoon Kim

Preparation and characterization of LiMn2O4 and LiCo0.16Mn1.84O4 as cathode materials for lithium-ion batteries by low heating solid state coordination method

Yudai Huang, Juan Li, Dianzeng Jia

Effect of thermal conductivity on reaction front propagation during combustion synthesis of intermetalics

M. Ballas, H. Song, O. J. Ilegbusi

Influence of negative voltage on the structure and properties of DLC films deposited on NiTi alloys by PBII

Y. Cheng, Y. F. Zheng

Effect of Re-Nb on the strength and toughness of 3Cr2MoNiWV cast hot working die steel

Yan-Pei Song, Xie-Min Mao, Wen-Yan Wang, Zhi-Ying Ouyang, Hong-Yu Liang, Luo-Li Li

Formation characteristics of an aluminum hydroxide fiber by a hydrolysis of aluminum nano powder

Young Hwa Oh, Chang Kyu Rhee, Do Hyang Kim, Geun Hee Lee, Whung Whoe KIM

Porous methacrylate tissue engineering scaffolds: using carbon dioxide to control porosity and interconnectivity

John J. A. Barry, Marta M. C. G. Silva, Sarah H. Cartmell, Robert E. Guldberg, Colin A. Scotchford, Steven M. Howdle

Microstructure and ionic conductivity of Sr- and Mg-doped LaGaO3

N. Liu, M. Shi, C. Wang, Y. P. Yuan, P. Majewski, F. Aldinger

Preparation of composite particles coated with two kinds of solid powders by semi-chemical recycle method

M. Tanaka, Y. Taguchi, N. Sawatari, N. Saito

Microstructural development and electrical properties of lead zirconate titanate composite films

S.-T. Chen, J.-M. Wu, T.-S. Yeh, L.-J. Hu

Microstructure and mechanical behavior of AlSiCuMgNi piston alloys reinforced with TiB2 particles

D. G. Zhao, X. F. Liu, Y. C. Pan, Y. X. Liu, X. F. Bian

Self-diffusion of transition metals in (Ti,W,Cr)B2 solid solutions

H. Schmidt, G. Borchardt, C. Schmalzried, R. Telle, H. Baumann, S. Weber, H. Scherrer

Nanoparticle-induced enhancement in fracture toughness of highly loaded epoxy composites over a wide temperature range

J. T. Han, K. Cho

Spray-drying process for synthesis of nanosized LiMn2O4 cathode

H. M. Wu, J. P. Tu, Y. Z. Yang, D. Q. Shi

Growth and characterization of partially oxidized platinum polymers in nanoscale templates

B. M. Anderson, S. K. Hurst, L. Spangler, E. H. Abbott, P. Martellaro, P. J. Pinhero, E. S. Peterson

Effect of Al doping on structural and dielectric properties of PLZT ceramics

R. Rai, S. Sharma, R. N. P. Choudhary

A systematic study on the growth of PZNT films by LPE method

Xinhua Zeng, Fen Qin, Xin Yao, Nanhua Xu, Shi Xu

Composition and crystal structure of resorbable calcium phosphate thin films

L. Tuck, M. Sayer, M. Mackenzie, J. Hadermann, D. Dunfield, A. Pietak, J. W. Reid, A. D. Stratilatov

A new indirect method of measuring the contents of solid inclusions in liquid aluminium alloys

X. Cao

Corrosion and stress corrosion cracking behavior of equal channel angular pressed oxygen-free copper in 3.5% NaCl solution

Y. H. Jang, S. S. Kim, S. Z. Han, C. Y. Lim, C. J. Kim

Effect of minor Sc and Zr addition on the mechanical properties of Friction Stir Processed 2024 Aluminium alloy

P. Cavaliere

Phase relationship in the Fe-Pt-Pr ternary system at 500°C

Z. F. Gu, G. Cheng, J. Ren, Z. M. Wang, H. Y. Zhou

Mechanical and fracture behavior of powder metalurgy processed Ti3Al-based alloys

B. Dimčić, I. Cvijović, M. T. Jovanović, D. Božić, O. Dimčić

Waste glass and fly ash derived glass-ceramic

Soon-Do Yoon, Yeon-Hum Yun

Fibre-reinforced composite implant: in vitro mechanical interlocking with bone model material and residual monomer analysis

R. H. Mattila, M. A. Puska, L. V. J. Lassila, P. K. Vallittu

Electrical behaviour of materials based on monoclinic celsian derived from cation-exchanged commercial zeolites

A. Motori, F. Patuelli, A. Saccani, F. Andreola, F. Bondioli, C. Siligardi, A. M. Ferrari

Glycothermal synthesis of vanadium(III) phosphate hydrates

T. Nakamura, T. Inui, M. Inoue, T. Miyake

Designing biological apatite suitable for neomycin delivery

R. Murugan, S. Ramakrishna

Monitoring of cure kinetic prepreg and cure cycle modeling

M. L. Costa, E. C. Botelho, M. C. Rezende

Feasibility of three-dimensional macroporous scaffold using calcium phosphate glass and polyurethane sponge

Young-Sang Park, Kyoung-Nam Kim, Kwang-Mahn Kim, Seong-Ho Choi, Chong-Kwan Kim, Racquel Z. Legeros, Yong-Keun Lee

Methods for modelling the ultimate strength of orthotropic plate with a central hole under uniaxial tension

S. Baselga Ariño, M. Maza Frechín

Erratum to: Conductive percolation threshold of conductive-insulating granular composites

L. Ren, J. Tong, D. Chen, D. He, Z. Han, J. Li

List of Review Papers