Ausgabe 14/2007
Inhalt (88 Artikel)
Microstructural evolution during direct laser sintering in the Al2O3–SiO2 system
Jürgen G. Heinrich, André Gahler, Jens Günster, Martin Schmücker, Jingxian Zhang, Dongliang Jiang, Meiling Ruan
The structural deformations in the Si/SiGe system induced by thermal annealing
Shuqi Zheng, M. Mori, T. Tambo, C. Tatsuyama
Microhardness of quenched and annealed isotactic polypropylene
Thomas Koch, Sabine Seidler, Erich Halwax, Sigrid Bernstorff
Effect of strain rate and environment on the mechanical properties of the Ni–19Si–3Nb–0.15B–0.1C intermetallic alloy at high temperatures
C. C. Fu, J. S. C. Jang, L. J. Chang, T. Y. Lin, C. M. Kuo
Effect of Nd substitution on structure and magnetic properties of NdxDy3−xFe5O12 garnet powders
Liming Yu, Jiujing Wang, Shixun Cao, Shujuan Yuan, Jincang Zhang
Formation of monetite nanoparticles and nanofibers in reverse micelles
Kun Wei, Chen Lai, Yingjun Wang
Ballistic-performance optimization of a hybrid carbon-nanotube/E-glass reinforced poly-vinyl-ester-epoxy-matrix composite armor
Mica Grujicic, B. Pandurangan, D. C. Angstadt, K. L. Koudela, B. A. Cheeseman
Numerical model for nucleation of peritectic alloy during unidirectional solidification
Yunpeng Su, Meng Wang, Xin Lin, Qian Chen, Weidong Huang
LiMn2O4 particles prepared by spray pyrolysis from spray solution with citric acid and ethylene glycol
Seo Hee Ju, Do Youp Kim, Eun Byul Jo, Yun Chan Kang
Formation of bulk Cu6Sn5 intermetallic compounds in Sn–Cu lead-free solders during solidification
J. Shen, Y. C. Liu, H. X. Gao
The effect of porogen on physical properties in MTMS–BTMSE spin-on organosilicates
B. R. Kim, J. M. Son, M. J. Ko
Artificial neural network modeling for the prediction of critical transformation temperatures in steels
Carlos Garcia-Mateo, Carlos Capdevila, Francisca Garcia Caballero, Carlos García de Andrés
Effect of low-density filler on mechanical properties of syntactic foams of cyanate ester
Bibin John, C. P. Reghunadhan Nair, K. Ambika Devi, K. N. Ninan
Preparation, spectroscopic properties and enhanced luminescence of Tb3+-doped LuAG phosphors and transparent ceramics by introduction of Sc3+
Yi-kun Liao, Dan-yu Jiang, Tao Feng, Na Zhang
Annealing effects on the reordering of severe plastic deformed boron doped Ni3Al
Atef Korchef, Abdelwahab Kolsi, Nabil Njah
Laser sintering ZnO thick films for gas sensor application
Bai Lin Zhu, Chang Sheng Xie, Ai Hua Wang, Jun Wu, Run Wu, Jing Liu
The optical and electrical properties in Nd3+ doped lead tungstate single crystals
Yanlin Huang, Hyo Jin Seo, Wenliang Zhu
Hollow biomorphic Al2O3 fibers produced from sisal
Tarcisio E. Andrade Jr, Carlos Renato Rambo, Heino Sieber, Antonio E. Martinelli, Dulce Maria A. Melo
Effect of grain width and aspect ratio on mechanical properties of Si3N4 ceramics
Zoran Krstic, Zhengbo Yu, Vladimir D. Krstic
Effects of milling conditions on hydrogen storage properties of graphite
Zhenguo Huang, Andrzej Calka, Huakun Liu
Fabrication and properties of in situ synthesized particles reinforced aluminum matrix composites of Al–Zr–O–B system
G. R. Li, Y. T. Zhao, Q. X. Dai, X. N. Cheng, H. M. Wang, G. Chen
Fabrication of SiC by carbothermal-reduction reactions of diatomaceous earth
Branko Matovic, Aleksandra Saponjic, Aleksandar Devecerski, Miroslav Miljkovic
Surface chemical investigation into the cleaning procedures of historic tapestry materials. Part 2
David Howell, Rob Mitchell, Christopher M. Carr
Structural and magnetic properties of strontium–borate glasses containing iron ions
I. Ardelean, R. Lungu, P. Păşcuţă
Electrical conduction and relaxation mechanism in Li2AlZr[PO4]3
T. Savitha, S. Selvasekarapandian, C. S. Ramya, M. S. Bhuvaneswari, P. C. Angelo
Recrystallization and fracture characteristics of thin copper wire
Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen, Yuan-Tin Wang
Investigation on magnetorheological elastomers based on natural rubber
Lin Chen, Xing-long Gong, Wan-quan Jiang, Jing-jing Yao, Hua-xia Deng, Wei-hua Li
Effect of simultaneous substitution of La and Mn on dielectric behavior of barium titanate ceramic
Om Parkash, Devendra Kumar, R. K. Dwivedi, K. K. Srivastava, Prakash Singh, Sindhu Singh
On the solid-state ageing behaviour of the polysaccharide, guar gum
L. L. Barré, A. S. Vaughan, S. J. Sutton
Study on structure and performance of polycarbonate urethane synthesized via different copolymerization methods
Jintang Guo, Meihua Zhao, Yan Ti, Bo Wang
Preparation and characterization of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites by melt intercalation
Yibing Cai, Yuan Hu, Shanyong Xuan, Yi Zhang, Huaxia Deng, Xinglong Gong, Zuyao Chen, Weicheng Fan
Electrorheological properties of polypyrrole–SnO2–methylcellulose nanocomposite suspensions
Dae Jeon Yoon, Young Dae Kim
Study on titania nanotube arrays prepared by titanium anodization in NH4F/H2SO4 solution
Tian Tian, Xiu-feng Xiao, Rong-fang Liu, Hou-de She, Xiao-feng Hu
Influences of MonoSilanolIsobutyl-POSS on thermal stability of polymethylsilxoane
Y. R. Liu, Y. D. Huang, L. Liu
Crystal orientation dependence of anelastic relaxation in 8Y-fully stabilized zirconia
Yasuhiro Okada, Masahito Matsuzawa, Susumu Horibe
Role of Ti diffusion on the formation of phases in the Al2O3–Al2O3 brazed interface
Abhijit Kar, Sudipta Mandal, Rabindra N. Ghosh, Tamal K. Ghosh, Ajoy Kumar Ray
Preparation of Y-TZP ceramic fibers by electrolysis-sol-gel method
Jianjun Li, Xiuling Jiao, Dairong Chen
Microstructure and properties of an electroconductive SiC-based composite
Diletta Sciti, Andrea Balbo, Cesare Melandri, Giuseppe Pezzotti
Thermal and crystallization behavior of zirconia precursor used in the solution precursor plasma spray process
Dianying Chen, Eric Jordan, Maurice Gell
Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests
Ramesh Kumar Guduru, Kristopher A. Darling, Ronald O. Scattergood, Carl C. Koch, K. L. Murty
Effect of welding parameters on the strain rate and microstructure of friction stir spot welded 2024 aluminum alloy
Adrian Gerlich, Peter Su, Motomichi Yamamoto, Tom H. North
Study of welding characteristics of 0.3C–CrMoV(ESR) ultrahigh strength steel
M. R. Suresh, P. P. Sinha, D. S. Sarma, N. B. Ballal, P. Krishna Rao
Mechanical vs. electrical failure mechanisms in high voltage, high energy density multilayer ceramic capacitors
Amanda Lynn Young, Gregory E. Hilmas, Shi C. Zhang, Robert W. Schwartz
On the non-destructive detection of fatigue damage in industrial aluminium alloys by positron annihilation
Uwe Holzwarth, Petra Schaaff
Morphological, structural and optical characterization of nickel nanostructures
Raminder Kaur, N. K. Verma, S. K. Chakarvarti
On structural and high temperature electrochemical properties of ZrO2 thin film coating on Zr metal produced by carbonate melt
X. T. Zhang, R. H. Zhang, S. M. Hu, T. Liu
Studies on the preparation and structure of polyacrylamide/α-zirconium phosphate nanocomposites
Rui Zhang, Yuan Hu, Baoguang Li, Zuyao Chen, Weicheng Fan
Acoustic emission during tensile deformation of pre-strained nuclear grade AISI type 304 stainless steel in the unnotched and notched conditions
Chandan Kumar Mukhopadhyay, Tamanna Jayakumar, Baldev Raj, Kalyan Kumar Ray
Luminescence from praseodymium doped AlN thin films deposited by RF magnetron sputtering and the effect of material structure and thermal annealing on the luminescence
Muhammad Maqbool, Hugh H. Richardson, Martin E. Kordesch
Effect of temperature on the creep behavior of a Ni–Cr–Fe–Al alloy: a comparison of the experimental data and a model
Essam El-Magd, Jürgen Gebhard, Jan Stuhrmann
Preparation of 3YSZ/Cu composite by in-situ chemical route
Jian Ding, Naiqin Zhao, Chunsheng Shi, Xiwen Du, Chunnian He, Jiajun Li
The crystallographic orientation relationship between Al2O3 and MgAl2O4 in the composite material Al2O3/Al–Mg–Si alloy
Susumu Ikeno, Kenji Matsuda, Toshimasa Matsuki, Toshiaki Suzuki, Noriaki Endo, Tokimasa Kawabata, Yasuhiro Uetani
Thermal stress hysteresis and stress relaxation in an epoxy film
Jeremy Thurn, Theresa Hermel-Davidock
The behaviour of iron and aluminium during the diffusion welding of carbon steel to aluminium
M. Kamal Karfoul, Gordon J. Tatlock, Robert T. Murray
Identification of microstructural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel
V. Thomas Paul, S. Saroja, P. Hariharan, A. Rajadurai, M. Vijayalakshmi
Electrophoretic deposition of alumina on stainless steel from non-aqueous suspension
Laxmidhar Besra, Pravanjan Samantaray, Sarama Bhattacharjee, Bimal P. Singh
Morphology, microstructure, and residual stress in EBPVD erbia coatings
Alan F. Jankowski, Cheng K. Saw, James L. Ferreira, Jennifer S. Harper, Jeffrey P. Hayes, Bruce A. Pint
Development of macropores in calcium carbonate body using novel carbonation method of calcium hydroxide/sodium chloride composite
Yoong Lee, Yeong Min Hahm, Shigeki Matsuya, Masaharu Nakagawa, Kunio Ishikawa
Effect of AlN particles on the corrosion behavior of Al/AlNP composites
ZhangSheng Liu, BianTao Wu, MingYuan Gu
Conductivity study of polyethylene oxide (PEO) complexed with sodium bicarbonate
J. Siva Kumar, K. Vijaya Kumar, A. R. Subrahmanyam, M. Jaipal Reddy
Effect of oxygen partial pressure on the electrical and optical properties of highly (200) oriented p-type Ni1−xO films by DC sputtering
Suman Nandy, Biswajit Saha, Manoj K. Mitra, K. K. Chattopadhyay
Effects of pH on the dispersion and cell performance of LiCoO2 cathodes based on the aqueous process
Chia-Chen Li, Jyh-Tsung Lee, Yi-Ling Tung, Chang-Rung Yang
Chromium vaporization of the ferritic steel Crofer22APU and ODS Cr5Fe1Y2O3 alloy
E. Konysheva, U. Seeling, A. Besmehn, L. Singheiser, K. Hilpert
Synthesis and characterization of thermoplastic polyurethane/montmorillonite nanocomposites produced by reactive extrusion
Yibing Cai, Yuan Hu, Lei Song, Lei Liu, Zhengzhou Wang, Zuyao Chen, Weicheng Fan
Effect of Y addition on microstructure and martensitic transformation of a Ni-rich Ti–Ni shape memory alloy
A. L. Liu, J. H. Sui, Y. C. Lei, W. Cai, Z. Y. Gao, L. C. Zhao
Fabrication and characterization of SiCw/MoSi2 composite from COSHSed powder
Jianguang Xu, Baolin Zhang, Guojian Jiang, Wenlan Li, Hanrui Zhuang
Comparison of the fluoride, arsenate and nitrate anions water depollution potential of a calcined quintinite, a layered double hydroxide compound
Fabian Delorme, Alain Seron, Anne Gautier, Catherine Crouzet
DEPP functionally graded piezoceramics via micro-fabrication by co-extrusion
Paul W. Alexander, Diann Brei, John W. Halloran
Experimental and numerical study of elastic behavior of heterogeneous model materials with spherical inclusions
N. Tessier-Doyen, J. C. Glandus, M. Huger
Evaluating environmental stress cracking thresholds by contact angle measurements
Peter J. Walsh, Alan J. Lesser
Studies on machinability of Al/Sip + SiCp composite materials
Qiguo Zhang, Jianxun Qiu, Yi Wang, Mingyuan Gu
Perovskite-type oxides as susceptor materials in dielectric heating
Y. Zhang-Steenwinkel, H. L. Castricum, A. Bliek, E. Esveld
Preparation and electrical properties of sintered oxides composed of Mn1.5Co(0.25+X)Ni(1.25-X)O4 ( ) with a cubic spinel structure
T. Yokoyama, T. Meguro, Y. Shimada, J. Tatami, K. Komeya, Y. Abe
Crystal microstructure suitable for high-performance thermoelectric bulk materials
Osamu Yamashita, Hirotaka Odahara
High temperature biaxial strength of porous mullite-alumina and mullite-zirconia ceramics
Bruno A. Latella, Edward G. Mehrtens
Subsolidus phase equilibria in the RuO2–ZnO–SiO2 system
Marko Hrovat, Janez Holc, Sebastjan Glinšek
Preparation of biodegradable poly(3-hydroxybutyrate) (PHB) and poly(ethylene glycol) (PEG) graft copolymer
Cai Zhijiang, Wen Zhihong
Synthesis of silicon carbide nanorods from mixture of polymer and sol–gel silica
V. Raman, G. Bhatia, P. R. Sengupta, A. K. Srivastava, K. N. Sood