Ausgabe 11/2015
Inhalt (54 Artikel)
The influence of mesh misalignment on the dynamic characteristics of helical gears including sliding friction
Hanjun Jiang, Yimin Shao, Chris K. Mechefske, Xiaohui Chen
Modeling and numerical analysis of corona-induced vibration on high-voltage transmission line with raindrops
Chao Zhou, Yibing Liu, Yanping Liu
Inverse dynamics of a 3-DOF translational parallel kinematic machine
S. Shankar Ganesh, A. B. Koteswara Rao
Forced response of the inertial piezoelectric rotary motor to electric excitation
Lizhong Xu, Jichun Xing
Research and comparison on the leakage and fluid force between the axial and the radial labyrinth seal
Xinyang Li, Jiangang Yang, Wanjun Xu
Viscoelastic analysis of a sleeve based on the BP neural network
Yubin Gao, Haibin Li, Guangmei Wei, Yun He
Study on super-harmonic resonance for gear transmission based on teeth surface friction
Xigui Wang, Yongmei Wang, Xuezeng Zhao, Xinglin Li
Effect of welding parameters (plunge depths of shoulder, pin geometry, and tool rotational speed) on the failure mode and stir zone characteristics of friction stir spot welded aluminum 2024-T3 sheets
Moslem Paidar, Alireza Khodabandeh, Mahsa Lali Sarab, Morteza Taheri
Determination of the contact stresses in double-row tapered roller bearings using the finite element method, experimental analysis and analytical models
Ruben Lostado, Roberto Fernandez Martinez, Bryan J. Mac Donald
Failure behavior of 2024-T3 aluminum under tension-torsion conditions
Marcos Rodríguez-Millán, Álvaro Vaz-Romero, Ángel Arias
Experimental study of boundary layer in compressible flow using hot film sensors through statistical and qualitative methods
A. A. Haghiri, N. Fallahpour, M. Mani, M. Tadjfar
Numerical study of a variable camber plunge airfoil under wind gust condition
Jianyang Zhu, Lin Jiang, Hui Zhao, Bo Tao, Bin Lei
An investigation on the supersonic ejectors working with mixture of air and steam
Maziar Shafaee, Mohsen Tavakol, Rouzbeh Riazi, Navid Sharifi
Identification of dominant structures and their flow dynamics in the turbulent two-phase flow using POD technique
Shahzad Munir, Muhammad Israr Siddiqui, Morgan Heikal, Abdul Rashid Abdul Aziz, Guillaume de Sercey
Effect of baffle number on mixed convection within a ventilated cavity
Mohamed Amine Belmiloud, Nord-eddine Sad chemloul
A study on two phase flows of linear compressors for the prediction of refrigerant leakage
Il Sun Hwang, Wonsik Oh, Kyeongbae Park, Young Lim Lee
Numerical simulation of mixed convection in vertical concentric cylinders
Sangro Park, Younghoon Jung, Changhoon Lee
Study on electrohydrodynamic jetting performance of organic solvents
Soo-Hong Lee, Xuan Hung Nguyen, Yeonghyeon Gim, Han Seo Ko
Sectional lift coefficient of a rotating wing at low Reynolds numbers
Jieun Kim, Jihoon Kweon, Haecheon Choi
Investigation of friction in rectangular Nitrile-Butadiene Rubber (NBR) hydraulic rod seals for defence applications
Shankar Bhaumik, A. Kumaraswamy, S. Guruprasad, P. Bhandari
Analysis on mass sensing characteristics of SWCNT-based nano-mechanical resonators using continuum mechanics based finite element analysis
Seung-Hyun Cho, Myung-Seok Choi, Dong-Keun Kang, Jung Hee Lee, Chang-Wan Kim
Stress-diffusion coupled multiscale analysis of Si anode for Li-ion battery†
Seongmin Chang, Janghyuk Moon, Maenghyo Cho
Variable width based stepped MEMS cantilevers for micro or pico level biosensing and effective switching
Deep Kishore Parsediya, Jawar Singh, Pavan Kumar Kankar
Evaluation of optimization algorithms for the design of a magnetic cell separator for malaria-infected blood
Jeongho Kim, Chang-Nyung Kim
Nanofluid bioconvection in presence of gyrotactic microorganisms and chemical reaction in a porous medium
Kalidas Das, Pinaki Ranjan Duari, Prabir Kumar Kundu
Design and 3D printing of controllable-pitch archimedean screw for pico-hydropower generation
Kyung Tae Lee, Eun-Seob Kim, Won-Shik Chu, Sung-Hoon Ahn
A study on the modified Hough algorithm for image processing in weld seam tracking
Qian-Qian Wu, Jong-Pyo Lee, Min-Ho Park, Byeong-Ju Jin, Do-Hyeong Kim, Cheol-Kyun Park, Ill-Soo Kim
Swarm intelligence based on modified PSO algorithm for the optimization of axial-flow pump impeller
Fuqing Miao, Hong-Seok Park, Cholmin Kim, Seokyoung Ahn
Performance evaluation and optimization of nano boric acid powder weight percentage mixed with vegetable oil using the Taguchi approach
P. N. L. Pavani, R. Pola Rao, S. Srikiran
Grinding titanium Ti-6Al-4V alloy with electroplated cubic boron nitride wheel under cryogenic cooling
J. Elanchezhian, M. Pradeep Kumar, G. Manimaran
Hopping system control with an approximated dynamics model and upper-body motion
Hyangjun Lee, Junho Oh
Adaptive fault detection and isolation for a class of robot manipulators with time-varying perturbation
Amaneh Salmani Rezazadeh, Hamid Reza Koofigar, Saeed Hosseinnia
Internal features in basin of attraction of the simplest walking model
Kang An, Zuhua Fang, Yiran Li, Qijun Chen
Numerical investigation of heat transfer characteristics for Subsea Xmas tree assembly
Biao Hu, Hongwu Zhu, Kuang Ding, Fangling Xu, Youjiang Zhang
Thermal and inertial parameters of the flow field of a scramjet engine
Jigar Sura, Satheesh Kumar, Viren Menezes
A study for estimate of contamination source with numerical simulation method in the turbulent type cleanroom
Sang-Mok Han, Young-Kyu Hwang, Dong-Kwon Kim
An approach to indirect estimation of high pressure turbine inlet temperature of turbofan engines based on gas path thermodynamic relations
Benwei Li, Yong Zhao, Yun Zhang, Feixiang Zhu, Xinyi Yang
Numerical predictions of detailed flow structural characteristics in a channel with angled rib turbulators
Jongmyung Park, Samgyu Park, P. M. Ligrani
Study on the combustion process and work capacity of a micro free-piston engine
Qian Wang, Liming Dai, Kai Wu, Jin Bai, Zhixia He
Characteristics of flow and thrust variations in a jet engine with a variable area nozzle
Junho Park, Chae Hoon Sohn
A review of vibration-based MEMS hybrid energy harvesters
Mohammed Salim, Hakim S. Sultan Aljibori, Dhia Salim, M. Haris M. Khir, A. Sh. Kherbeet
Restrictions on the analytic approach of unconstrained melting inside a spherical capsule
Sang Woo Hong, Yong Tae Lee, Jae Dong Chung
Initial stability analysis of cementless hemiarthroplasty using a rectangular cross-sectional stem for type A2 intertrochanteric fractures
Yuan-Zhu Xin, Hong-Man Cho, Seok-Jo Yang
Erratum to “Solar radiation assisted mixed convection MHD flow of nanofluids over an inclined transparent plate embedded in a porous medium”
Meisam Habibi Matin, Reza Hosseini