Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 12/2019

Ausgabe 12/2019

Inhaltsverzeichnis ( 52 Artikel )

01.12.2019 | Ausgabe 12/2019

Additive manufacturing of smart insole by direct printing of pressure sensitive material

Hochan Kim, Sungchul Park, Inhwan Lee

01.12.2019 | Ausgabe 12/2019

Influences of deposition strategies on thermo-mechanical characteristics of a multilayer part deposited by a wire feeding type DED process

Bih Lii Chua, Dong-Gyu Ahn, Jae-Gu Kim

01.12.2019 | Ausgabe 12/2019

Design and fabrication of fluid flow characteristic controllable trawl door using a trailing edge flap

Jiwon Lee, Hongkeun Yoon, Yeonju Park, Kyusuk Choi, Chunwoo Lee, Dosik Shim, Sanghu Park

01.12.2019 | Ausgabe 12/2019

Improved resistance stability for tactile sensor fabrication and investigation of the dispensing parameters of a nanocomposite material

Chaima Fekiri, Song Ho Kim, Ho-Chan Kim, In Hwan Lee

01.12.2019 | Ausgabe 12/2019

Multiple-motion mode switching robot platform

Xiao-Tian Sun, Soo-Hong Lee

01.12.2019 | Ausgabe 12/2019

Preparation of “Ready-Made STL (RMS)” for build assurance in additive metal manufacturing (AMM): A review

Haeseong Jee

01.12.2019 | Ausgabe 12/2019

Numerical investigation on He and Ar gas convective cooling for optical fiber glass drawing at short draw towers

Gia Ginelle Carandang, Kyoungjin Kim

01.12.2019 | Ausgabe 12/2019

Application of ultrasonic nanocrystal surface modification for improving surface profile of DEDed AISI 316L

Min-Seob Kim, Yeong-Kwan Jo, Sang-Hu Park, Do-Sik Shim

01.12.2019 | Ausgabe 12/2019

Investigation of processing parameters in micro-thermoforming of micro-structured polystyrene film

Trieu Khoa Nguyen, Bong-Kee Lee

01.12.2019 | Ausgabe 12/2019

Effect of spray nozzle position on pad temperature distribution and wafer non-uniformity

Kihun Lee, Dasol Lee, Seonho Jeong, Donghwan Lee, Haedo Jeong

01.12.2019 | Ausgabe 12/2019

A wavelet packet spectral subtraction and convolutional neural network based method for diagnosis of system health

Van Huan Pham, Soonyoung Han, Minh Duc Do, Hae-Jin Choi

01.12.2019 | Ausgabe 12/2019

Networks of tooth helix deviations of ground and super-finished gears - Phase edges and intensity vertices

Daisuke Iba, Hiroki Inoue, Hidekatsu Noda, Myongsoo Kim, Ichiro Moriwaki

01.12.2019 | Ausgabe 12/2019

Bending fatigue strength of case-carburized helical gears with large helix angles up to 40 degrees

Mikiya Yamaoka, Motomu Tanaka, Masaya Kumada, Kengo Nojima, Ryosuke Nishi, Yuichi Ono, Takao Koide

01.12.2019 | Ausgabe 12/2019

Rotational plating process design with computational fluid analysis

Joo-Pyo Hong, Ki Seok Lee, Midum Jung, Kyeong-Seop Song

01.12.2019 | Ausgabe 12/2019

Case study: Effectiveness of a sketch learning model for engineering students

Seongwon Jeong

01.12.2019 | Ausgabe 12/2019

An experimental study on microstructural characteristics and mechanical properties of stainless-steel 316L parts using directed energy deposition (DED) process

Jung Sub Kim, Byoung Joo Kang, Sang Won Lee

01.12.2019 | Ausgabe 12/2019

Estimation of WorldSID thorax kinematics using multiple 3-axis accelerometers

Yeseop Park, Youkeun K. Oh

01.12.2019 | Ausgabe 12/2019

Development of shrinkage model of micro structured vitreous carbon mold for glass molding

Muhammad Refatul Haq, Jun Kim, Jonghyun Ju, Young Kyu Kim, Woo-Jin Chang, Seok-min Kim

01.12.2019 | Ausgabe 12/2019

Surface quality evaluation of 0.2 % C and AISI 304 steels in turning with sustainable lubricating condition

K. C Wickramasinghe, G. I. P. Perera, S. W. M. A. I Senevirathne, Himan KG Punchihewa, Hiroyuki Sasahara

01.12.2019 | Ausgabe 12/2019

Vibration suppression of cart-pendulum system by combining the input-shaping control and the position-input position-output feedback control

Ji-Hwan Shin, Dong-Han Lee, Moon K. Kwak

01.12.2019 | Ausgabe 12/2019

Automated gear fault detection of micron level wear in bevel gears using variational mode decomposition

Dada Saheb Ramteke, Anand Parey, Ram Bilas Pachori

01.12.2019 | Ausgabe 12/2019

Effective vibration test planning method for equipment with high slenderness ratio

Inki Park, Junhong Park

01.12.2019 | Ausgabe 12/2019

Alleviation of high-temperature oxidation and cracking of water-cooled roll for hot-rolling steel

Yong-Joon Lee, Kyung-Woo Yi

01.12.2019 | Ausgabe 12/2019

Additive/subtractive hybrid manufacturing of 316L stainless steel powder: Densification, microhardness and residual stress

Yuying Yang, Yadong Gong, Shuoshuo Qu, Bo Xin, Yunchao Xu, Yang Qi

01.12.2019 | Ausgabe 12/2019

Inconel 617 alloy creep life augmentation by graphene transfer coating

Fahim Ahmed Ibupoto, Janggyun Lim, Seongkyun Kim, Bum Joon Kim, Seunghyun Baik, Moon Ki Kim

01.12.2019 | Ausgabe 12/2019

A case study of gear wheel material and heat treatment effect on gearbox strength calculation

Silvia Maláková, Anna Guzanová, Dagmar Draganovská, Gabriel Fedorko, Vieroslav Molnár

01.12.2019 | Ausgabe 12/2019

Optimized design of silicone pad for bended window lamination in organic light-emitting diodes

Seong-Won Lim, Dong-Hoon Jang, Byung-Min Park, Kwan-Young Han

01.12.2019 | Ausgabe 12/2019

Trilayer model in design of W/C multilayer mirrors with a small period thickness

Kwon Su Chon

01.12.2019 | Ausgabe 12/2019

Effect of hydrogen on tensile flow and failure mechanism of low nickel-type 316L austenitic stainless steel

Thanh Tuan Nguyen, Jaeyeong Park, Seung Hoon Nahm, Un Bong Baek

01.12.2019 | Ausgabe 12/2019

Thermal shear behavior in deformation phase of axisymmetric upsetting

Beong Bok Hwang, Jeong Hoon Noh

01.12.2019 | Ausgabe 12/2019

Axisymmetric squeezing dynamics of resin droplet with surface tension and its numerical solution

Kuendong Ha

01.12.2019 | Ausgabe 12/2019

Computational study on heat transfer and bed flow according to different regimes of fluidized beds

Byung Moon So, Hamada Mohamed Abdelmotalib, Mohamed Y. Hashim, Ik-Tae Im

01.12.2019 | Ausgabe 12/2019

Numerical investigation on thrust production and unsteady mechanisms of three-dimensional oscillating wing

A. R. Shanmugam, C. H. Sohn

01.12.2019 | Ausgabe 12/2019

Vortex dynamic characteristics of unsteady tip clearance cavitation in a waterjet pump determined with different vortex identification methods

Shun Xu, Xin-ping Long, Bin Ji, Gui-bin Li, Tao Song

01.12.2019 | Ausgabe 12/2019

An experimental study on the effect of a novel nature-inspired 3D-serrated leading edge on the aerodynamic performance of a double delta wing in the transitional flow regime

Hamed Khodabakhshian Naeini, Mahdi Nili-Ahmadabadi, Kyung Chun Kim

01.12.2019 | Ausgabe 12/2019

Integrated vortex micro T-mixer for rapid mixing of fluids

Mubashshir Ahmad Ansari, Kwang-Yong Kim, Sun Min

01.12.2019 | Ausgabe 12/2019

Effect of crushing conditions of crushing rate in process analysis of sewage-sludge organic solid-fuel crusher using the discrete element method

Il-Kab Jeong, Dong-Myung Lee, Hyung-Yoon Seo, Chung-Gil Kang

01.12.2019 | Ausgabe 12/2019

Design and evaluation of two-stage planetary gearbox for special-purpose industrial machinery

Zhen Qin, Yu-Ting Wu, Amre Eizad, Ki-Hun Lee, Sung-Ki Lyu

01.12.2019 | Ausgabe 12/2019

Experimental validation of theoretical models for hypercube models made by fused deposition modelling technology

Jeongho Choi, Sang-ik Lee

01.12.2019 | Ausgabe 12/2019

Reliability-based design optimization of time-dependent systems with stochastic degradation

Gordon J. Savage, Young Kap Son

01.12.2019 | Ausgabe 12/2019

Dynamic response characteristics of cylindrical baffled liquid storage tank to the baffle number

J. R. Cho, S. Y. Lee, M. S. Song

01.12.2019 | Ausgabe 12/2019

A new electromagnetic micromixer for the mixing of two electrolyte solutions

Yiping Chen, Xiaowen Fan, Chang Nyung Kim

01.12.2019 | Ausgabe 12/2019

Electromagnetic forming and perforation of Al tubes

Sagar Pawar, Sachin D. Kore

01.12.2019 | Ausgabe 12/2019

Real-time quality monitoring and control system using an integrated cost effective support vector machine

YeongGwang Oh, Moise Busogi, Kasin Ransikarbum, Dongmin Shin, Daeil Kwon, Namhun Kim

01.12.2019 | Ausgabe 12/2019

Study on the progressive forming mechanism of multi-step shafts based on convex-end billet in the cross wedge rolling technology

Sutao Han, Xuedao Shu, Taizhu Chen, Ying Chang, Ji Chen, Xing Chen, Wei Xiang

01.12.2019 | Ausgabe 12/2019

Perfect tracking of ZMP trajectory for humanoid locomotion using repetitive control

Mohamed A. Sayari, Riadh Zaier, Neila Masmoudi

01.12.2019 | Ausgabe 12/2019

System identification technique for control of hybrid bio-system

Yun Hyun Cho, Hoon Heo

01.12.2019 | Ausgabe 12/2019

Synthesis method of a mapping matrix for gravity compensators

Sang-Hyung Kim, Mun-Taek Choi, Chang-Hyun Cho

01.12.2019 | Ausgabe 12/2019

Chemical, thermal and dilution effects of carbon dioxide in oxy-fuel combustion of wood in a fixed bed

Josephat Kipyegon Tanui, Paul Ndirangu Kioni, Thomas Mirre, Mario Nowitzki

01.12.2019 | Ausgabe 12/2019

Prediction of homogeneous combustion by modification of the fuel combustion mechanism in a DME fueled CI engine

Young Chan Lim, Hyun Kyu Suh

01.12.2019 | Ausgabe 12/2019

A study on development of the thermal storage type plate heat exchanger including PCM layer

Donggyu Lee, Chaedong Kang

01.12.2019 | Ausgabe 12/2019

Phase transition between pressure and heat release oscillations in hybrid rocket combustion

Hyosang Choi, Changjin Lee, Sang Hun Kang

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise