Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 3/2020

Ausgabe 3/2020

Inhaltsverzeichnis ( 39 Artikel )

10.03.2020 | Original Article | Ausgabe 3/2020

Stability analyses of articulated rigid pipes conveying fluid with harmonic velocity using the method of multiple time scales

Javad Mohammadi, Mansour Nikkhah-Bahrami

03.03.2020 | Original Article | Ausgabe 3/2020

Research and experimental analysis of drill string dynamics characteristics and stick-slip reduction mechanism

Jialin Tian, Lai Wei, Lin Yang, Liming Dai, Tangjia Zhang, He Liu

03.03.2020 | Original Article | Ausgabe 3/2020

Accuracy analysis of spatial multi-loop mechanism effected by paired bearings support joint clearance

Fei Lin, Chuanzhi Chen, Jinbao Chen, Meng Chen

03.03.2020 | Original Article | Ausgabe 3/2020

Torsional vibration analysis of a planetary gear type antiresonant vibration isolator using transfer matrix method, Part I: System modeling

Hyeongill Lee, Hwan-Sik Yoon

03.03.2020 | Original Article | Ausgabe 3/2020

Torsional vibration analysis of a planetary gear type antiresonant vibration isolator using transfer matrix method, Part II: Application to automotive powertrain

Hyeongill Lee, Hwan-Sik Yoon

03.03.2020 | Original Article | Ausgabe 3/2020

Operational transfer path analysis based on deep neural network: Numerical validation

Dooho Lee, Jin Woo Lee

03.03.2020 | Original Article | Ausgabe 3/2020

Weak fault detection method of rolling bearing based on testing signal far away from fault source

Zhiyuan He, Guo Chen, Tengfei Hao, Chunyu Teng, Minli Hou, Zhenjie Cheng

03.03.2020 | Original Article | Ausgabe 3/2020

Observation of notch effect in Al6061-T6 specimens under tensile loading using digital image correlation and finite element method

Liang Wang, Jung-Hoon Park, Nak-Sam Choi

03.03.2020 | Original Article | Ausgabe 3/2020

Investigations on the strength of mechanical joints prepared from carbon fiber laminates with addition of carbon nanotubes

Mohit Kumar, J. S. Saini, H. Bhunia

03.03.2020 | Original Article | Ausgabe 3/2020

Random vibration fatigue life assessment and optimization of a train buffer beam considering welding residual stress

Chengji Mi, Jidong Liu, Xuewen Xiao, Wentai Li, Xiao Sun, Xingzu Ming, Changyan Tao, Ziyi Ren

03.03.2020 | Original Article | Ausgabe 3/2020

Intelligent energy-saving operation of wheel loader based on identifiable materials

Bing-wei Cao, Xin-hui Liu, Wei Chen, Kuo Yang, Dan Liu

03.03.2020 | Original Article | Ausgabe 3/2020

Experimental analysis of the thermal properties of fused quartz-reinforced Al-6061alloy matrix composites using RSM approach

Anupama Hiremath, Ritesh Bhat

03.03.2020 | Original Article | Ausgabe 3/2020

Post-buckling and delamination propagation behavior of composite laminates with embedded delamination

Abebaw Abie Mekonnen, Kyeongsik Woo, Minsong Kang, In-Gul Kim

03.03.2020 | Original Article | Ausgabe 3/2020

Damage detection in glass/epoxy composite structure using 8–12 GHz X-band

Alaa Raad Hussein, Thar M. Badri Albarody, Reza Alebrahim, M. Fayaz Bin Abd Hannan, Husam K. M. Al-Jothery, Monis Abdulmanan Abdullah, Najib Al-Shaibani

10.03.2020 | Original Article | Ausgabe 3/2020

Fatigue behavior and damage mechanism of aluminum foam sandwich with carbon-fiber face-sheets

Chang Yan, Jian Wang, Xuding Song

03.03.2020 | Original Article | Ausgabe 3/2020

Design of T-shaped tube hydroforming using finite element and artificial neural network modeling

Fethi Abbassi, Furqan Ahmad, Sana Gulzar, Touhami Belhadj, Ali Karrech, Heung Soap Choi

03.03.2020 | Original Article | Ausgabe 3/2020

Quantification of VIV-driven energy transfer for a circular cylinder with a pair of bumps at Reynolds number 150

Seungmin Kang, Sungmin Ryu, Simon Song

03.03.2020 | Original Article | Ausgabe 3/2020

A study on eccentric behavior of discharge valve in refrigerant compressor using laser sensors

Young Nam Jang, Young Lim Lee

03.03.2020 | Original Article | Ausgabe 3/2020

Quantitative comparison between volume-of-fluid and two-fluid models for two-phase flow simulation using OpenFOAM

Thinh Quy Duc Pham, Jichan Jeon, Sanghun Choi

03.03.2020 | Original Article | Ausgabe 3/2020

Characteristics of mine ventilation air flow using both blowing and exhaust ducts at the mining face

Huiuk Yi, Jongmyung Park, Min Sik Kim

03.03.2020 | Original Article | Ausgabe 3/2020

Performance comparison of parallel ILU preconditioners for the incompressible Navier-Stokes equations

Sungwoo Kang, Long Cu Ngo, Hyounggwon Choi, Wanjin Chung, Yo-Han Yoo, Jung Yul Yoo

01.03.2020 | Original Article | Ausgabe 3/2020

Decoupling of hyperbolic conservation laws using an improved eigenvector matrix

Noor Fatima Siddiqui, Mukkarum Hussain

01.03.2020 | Original Article | Ausgabe 3/2020

A study on an equivalent model of the threaded fasteners in complex structures through tightening and loosening analysis

Heerok Hong, Hoyong Lee, Naktak Jeong, Keonhee Baek, Myungwon Suh

03.03.2020 | Original Article | Ausgabe 3/2020

Prediction of settlement influence factors for laterally loaded short piles by using a continuum-based soil model

J. Ryue, K. Baik, J. Lee

03.03.2020 | Original Article | Ausgabe 3/2020

Failure analysis of R-regions of CFRP hat-shaped structure under pull-off load

Chen Rong, Li Shujian, Tae Jo Ko, Li Pengnan, Jiang Yong, Li Changping, Niu Qiulin

01.03.2020 | Original Article | Ausgabe 3/2020

Load analysis and structural strength evaluation of semi-submersible platform for wind turbines in Jeju Island sea states using hydrodynamic-structure interaction analysis

Dong-Chan Lee, Seunghyeon Cho, Hyun-ik Yang, Sang-kwon Na, Chang-wan Kim

01.03.2020 | Original Article | Ausgabe 3/2020

Reconstruction methodology of a Francis runner blade using numerical tools

Giovanni Delgado, Sergio Galván, Francisco Dominguez-Mota, J. C. García, Esteban Valencia

03.03.2020 | Original Article | Ausgabe 3/2020

Reliability-based robust design optimization for torque ripple reduction considering manufacturing uncertainty of interior permanent magnet synchronous motor

Gyeong Uk Jang, Chang-Wan Kim, Daesung Bae, Younghoon Cho, Jeong-Jong Lee, Seunghyeon Cho

03.03.2020 | Original Article | Ausgabe 3/2020

Effect of wettability on the water entry problem of aluminum spheres

Seolha Kim, Dongseob Kim, Hyungmo Kim

03.03.2020 | Original Article | Ausgabe 3/2020

Environmental sustainability evaluation of additive manufacturing using the NIST test artifact

JuYoun Kwon, Namhun Kim, Jungmok Ma

03.03.2020 | Original Article | Ausgabe 3/2020

Research on the sticking-sliding contact ratio in high-speed cutting of cupronickel B10

Miaoxuan Li, Daochun Xu, Ziyi Cui, Zhi Xie

03.03.2020 | Original Article | Ausgabe 3/2020

Microstructure and hardness of Stellite 21 deposited on hot forging die using direct metal deposition technology

Haichuan Shi, Jong-Rae Cho, Dong-Gyu An

03.03.2020 | Original Article | Ausgabe 3/2020

Semantics-aware adaptive simplification for lightweighting diverse 3D CAD models in industrial plants

Soonjo Kwon, Hyunoh Lee, Duhwan Mun

03.03.2020 | Original Article | Ausgabe 3/2020

Cut geometry calculation for the semifinish five-axis milling of nonstraight staircase workpieces

Hendriko Hendriko

03.03.2020 | Original Article | Ausgabe 3/2020

Linear ball guide design optimization considering stiffness, friction force, and basic dynamic load rating using particle swarm optimization

Van-Canh Tong, Gyungho Khim, Chun-Hong Park, Seong-Wook Hong

03.03.2020 | Original Article | Ausgabe 3/2020

Dimensional synthesis of six-degrees-of-freedom high-speed parallel robot using comprehensive evaluation index

Fan Zhang, Jiangping Mei, Yanqin Zhao

01.03.2020 | Original Article | Ausgabe 3/2020

Optimum design of the reconfiguration system for a 6-degree-of-freedom parallel manipulator via motion/force transmission analysis

Raymundo Ramos Alvarado, Eduardo Castillo Castañeda

03.03.2020 | Original Article | Ausgabe 3/2020

Characteristics of dust-collection efficiency and ozone emission by high-voltage electrode shape of electrostatic precipitator for subway tunnel environment

Sang-Hee Woo, Jae-In Lee, Jong Bum Kim, Gwi-Nam Bae, Seung-Bok Lee, Se-Jin Yook, Youhwan Shin

03.03.2020 | Original Article | Ausgabe 3/2020

Analysis on possibility of expanding low-load operation area for homogeneous charge compression ignition in CI engine with variable exhaust valve actuation

Insu Cho, Wootaek Kim, Jinwook Lee

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise