Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 3/2021

Ausgabe 3/2021

Inhaltsverzeichnis ( 46 Artikel )

27.02.2021 | Invited Review Article | Ausgabe 3/2021

Top-down nanofabrication approaches toward single-digit-nanometer scale structures

Dong Kyo Oh, Heonyeong Jeong, Joohoon Kim, Yeseul Kim, Inki Kim, Jong G. Ok, Junsuk Rho

27.02.2021 | Original Article | Ausgabe 3/2021

Early bolt looseness state identification via generalized variational mode decomposition and similarity index

Yanfei Guo, Zhousuo Zhang, Wenzhan Yang, Jianbin Cao, Teng Gong

27.02.2021 | Original Article | Ausgabe 3/2021

Parameter identification of the phenomenological model for magnetorheological fluid dampers using hierarchic enhanced particle swarm optimization

Jin Guo, Zhendong Li, Mengxuan Zhang

27.02.2021 | Original Article | Ausgabe 3/2021

Analysis of the modal frequency of a functionally graded cylindrical shell

Chao Liu, Wenguang Liu

27.02.2021 | Original Article | Ausgabe 3/2021

Enhancement of bearing fault detection using an alternative analytic energy operator and sparse Bayesian step-filtering

Yan Wang, Lichen Gu, Yuanbo Xu

27.02.2021 | Original Article | Ausgabe 3/2021

Analysis of the repeatability of a deployable space tri-prism mast based on the Monte Carlo method

Mingxing Gao, Rongqiang Liu, Hongwei Guo, Zongquan Deng

27.02.2021 | Original Article | Ausgabe 3/2021

Sequential approximate optimization on projectile disturbances of the moving tank based on BP neural network

Yu Chen, Guolai Yang, Honggen Zhou, Quanzhao Sun

27.02.2021 | Original Article | Ausgabe 3/2021

Effect of the worn status of wheel/rail profiles on wheel wear over curved tracks

Jie Kou, Jimin Zhang, Hechao Zhou, Chengping Wang, Lixia Sun

27.02.2021 | Original Article | Ausgabe 3/2021

Experimental research on the dynamic buckling of a tubular string when hitting the bottom of a vertical well

Zifeng Li, Qiang Wei, Jie Zhang

27.02.2021 | Original Article | Ausgabe 3/2021

Simulation of QPSK-based acoustic telemetry through drillstring

Younggy Shin

27.02.2021 | Original Article | Ausgabe 3/2021

Efficient topography optimization of a washing machine cabinet to reduce radiated noise during the dehydration process

Hyun-Guk Kim, Toan Mihn Nguyen, Giseok Lee, Cheolseung Lim, Semyung Wang

28.02.2021 | Original Article | Ausgabe 3/2021

Measurement of local strain: machine vision and finite element method

Seyyed Ehsan Eftekhari Shahri, Mohammad Lakhi, Sadegh Ranjbar

27.02.2021 | Original Article | Ausgabe 3/2021

Development of a Gaussian process modeling application for the prediction of missile aerodynamic coefficients

Seungmin Lee, Shinseong Kang, Kyunghoon Lee

27.02.2021 | Original Article | Ausgabe 3/2021

Analysis of fretting cracking condition for nub of steam turbine blade

Kihyeon Kim, Sung-San Cho, Dong Hyeon Hwang

27.02.2021 | Original Article | Ausgabe 3/2021

Scale parameter assessment based on pivot quantity for reliability analysis of a complex system

Dongwei Gu, Jinhan Gao, Yuhong Zhong, Zhen Xu

27.02.2021 | Original Article | Ausgabe 3/2021

Enhancement of Drucker-Prager yield model by adding corner points for pressure-dependent materials

Kwangmin Lee, Karuppasamy Pandian Marimuthu, Jungmoo Han, Hyungyil Lee

27.02.2021 | Original Article | Ausgabe 3/2021

Prediction of creep deformation behavior of KHR45A heater tube steel using nonlinear mixed-effect model

Gimo Yang, Young Wha Ma, Thi Giang Le, Kee Bong Yoon

27.02.2021 | Original Article | Ausgabe 3/2021

Numerical study on failure behavior of open-hole composite laminates based on LaRC criterion and extended finite element method

Decheng Liu, Dongfeng Cao, Haixiao Hu, Yucheng Zhong, Shuxin Li

27.02.2021 | Original Article | Ausgabe 3/2021

Case study for contact pressure improvisation with graded implant material in articular cartilages of knee joint

Vaishakh Raju, Poornesh K. Koorata, Yogeesh Kamat

27.02.2021 | Original Article | Ausgabe 3/2021

Spiral ring cavity to improve the stability of a centrifugal compressor

Min-Su Roh, Sang-Bum Ma, Kwang-Yong Kim

27.02.2021 | Original Article | Ausgabe 3/2021

A study on the flow characteristics of butterfly valve with baffles

Seung-Jun Oh, Jeong-Hwan Yoon, Si-Pom Kim

27.02.2021 | Original Article | Ausgabe 3/2021

A multi-objective airfoil shape optimization study using mesh morphing and response surface method

Hariharan Kallath, Jun Seok Lee, Foster Kwame Kholi, Man Yeong Ha, June Kee Min

27.02.2021 | Original Article | Ausgabe 3/2021

Performance of corrugated actuator-tabs of aspect ratio 2.0 on supersonic jet mixing enhancement

Tamal Jana, Mrinal Kaushik

27.02.2021 | Original Article | Ausgabe 3/2021

Nonlinear bending analysis of magnetoelectroelastic rectangular plates using higher order shear deformation theory

Yu-fang Zheng, Liang-liang Xu, Chang-ping Chen

27.02.2021 | Original Article | Ausgabe 3/2021

Optimal location of brake pad for reduction of temperature deviation on brake disc during high-energy braking

Heerok Hong, Gyeongpil Kim, Hoyong Lee, Jaesik Kim, Dasom Lee, Minsoo Kim, Myungwon Suh, Junghwan Lee

27.02.2021 | Original Article | Ausgabe 3/2021

Experimental study on mechanical and tribology behaviors of Mg-SiC nano/micro composite produced by friction stir process

A. Sadooghi, K. Rahmani

27.02.2021 | Original Article | Ausgabe 3/2021

Numerical study of mechanical behaviour of tubular structures under dynamic compression

Amir Partovi, M. M. Shahzamanian, P. D. Wu

27.02.2021 | Original Article | Ausgabe 3/2021

Structure integrity evaluation of gas protective wall for new construction method using strength test and numerical analysis

Doo Guen Song, Seung Ho Jung, Eui Soo Kim

27.02.2021 | Original Article | Ausgabe 3/2021

Design of end coil angular position and centerline shape of C-type side load coil spring for reducing side load of MacPherson strut suspension

Seunghyeon Cho, Hankun Yeon, Hyunho Kim, Chang-Wan Kim

27.02.2021 | Original Article | Ausgabe 3/2021

Binary NCP: a new approach for solving nonlinear complementarity problems

Byung Man Kwak, Joon Young Kwak

27.02.2021 | Original Article | Ausgabe 3/2021

Assessment of InfiniteFocus system measurement errors in testing the accuracy of crown and tooth body model

Anna Bazan, Paweł Turek, Łukasz Przeszłowski

28.02.2021 | Original Article | Ausgabe 3/2021

Structural analysis of woven-fabric composite considering changes in degrees of in-plane shear deformation during manufacturing process

Jeong-Min Lee, Ki-Hyeon Jeong, Young-Hoon Moon, Joon-Hong Park, Dae-Cheol Ko

28.02.2021 | Original Article | Ausgabe 3/2021

Surface formation and damage mechanisms of nano-ZrO2 ceramics under axial ultrasonic-assisted grinding

Yanyan Yan, Yafei Zhang, Bo Zhao, Junli Liu

27.02.2021 | Original Article | Ausgabe 3/2021

Full-phase optimization of PDC bit cutter layout to reduce lateral force based on zoning method

Tong Cao, Kaian Yu, Xuyue Chen, Hongwu Zhu, Rui Zhang

27.02.2021 | Original Article | Ausgabe 3/2021

Damaged and failure characterization of 7075-T6 Al alloy based on GISSMO model

Zhiqiang Zhang, Yuejie Cui, Ge Yu

27.02.2021 | Original Article | Ausgabe 3/2021

Numerical analysis of the effect of tool wear on surface integrity during hard turning

Rupak Kumar Nayak, Gaurav Bartarya, Manas Ranjan Sahoo

27.02.2021 | Original Article | Ausgabe 3/2021

Jumping motion planning for biped robot based on hip and knee joints coordination control

Yongming Bian, Jie Shao, Jixiang Yang, Ao Liang

27.02.2021 | Original Article | Ausgabe 3/2021

Hierarchical adaptive control of self-stabilizing electromechanical systems using artificial-immune self-tuning mechanism for state weighting-factors

Omer Saleem, Khalid Mahmood-ul-Hasan

28.02.2021 | Original Article | Ausgabe 3/2021

Theoretical and experimental investigation of the pressure ratio distribution and the regulation strategy of a two-stage turbocharging system for various altitudes operation

Huiyan Zhang, Xuyang Tang, Liansong Mu, Lei Shi, Kangyao Deng

27.02.2021 | Original Article | Ausgabe 3/2021

Theoretical study on performance comparison of various solar collectors using binary nanofluids

Minjung Lee, Yunchan Shin, Honghyun Cho

27.02.2021 | Original Article | Ausgabe 3/2021

Experimental study on the gas jet characteristics of a diesel-piloted direct-injection natural gas engine

Peng Jiang, Xu Liu, Lixuan Cao, Qian Wang, Zhixia He

27.02.2021 | Original Article | Ausgabe 3/2021

Effect of engine control parameters on combustion and particle number emission characteristics from a SIDI engine fueled with gasoline-ethanol blends

Sungha Baek, Jaeho Cho, Kangjin Kim, Cha-Lee Myung, Simsoo Park

27.02.2021 | Original Article | Ausgabe 3/2021

The fuzzy logic-based modeling of a micro-scale sloped solar chimney power plant

Muhammed Huseyin Guzel, Recep Emre Unal, Ahmet Onder, Muhammed Arif Sen, Faruk Kose

27.02.2021 | Original Article | Ausgabe 3/2021

Numerical analysis of the close-contact heat transfer of the electro-thermal drilling probes for glacier-ice exploration

Ui-Joon Park, Kwangu Kang, Hyung Ju Lee, Chan Ho Jeong, Jin-Yeong Park, Seong Hyuk Lee

27.02.2021 | Original Article | Ausgabe 3/2021

Cobalt ferrite decoration of molybdenum disulfide nanosheets; development of a nanocomposite-mediated hyperthermia method

Mohammadhossein Shahsavari Alavijeh, Adel Maghsoudpour, Morteza Khayat, Iman Rad, Shadie Hatamie

16.01.2021 | Retraction Note | Ausgabe 3/2021

Retraction Note to “Application of hybrid recurrent Laguerre-orthogonal-polynomial NN control in V-belt continuously variable transmission system using modified particle swarm optimization”

Chih-Hong Lin

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise