Ausgabe 5/2015
Inhalt (53 Artikel)
Effect of defect location on the swimming speed of a microscopic artificial swimmer: A numerical study
Suresh Alapati, Woo Seong Che, Yong Kweon Suh
Effects of SJA boundary conditions on predicting the aerodynamic behavior of NACA 0015 airfoil in separated condition
Mohammad Moshfeghi, Nahmkeon Hur
Low-Reynolds number flow computation for eppler 387 wing using hybrid DES/transition model
Jeong Hwan Sa, Soo Hyung Park, Chang Joo Kim, Jung Keun Park
A dynamic interface compression method for VOF simulations of high-speed planing watercraft
Heebum Lee, Shin Hyung Rhee
Complex nonequilibrium flows with slow and fast chemical reactions for simulation processes in open systems
Vladimir Aristov, Anna Frolova, Sergey Zabelok
A finite element analysis of turbulent eccentric stenotic flows by large eddy simulation
Byoung Jin Jeon, Jungwoo Kim, Hyoung Gwon Choi
Simulation of axisymmetric scramjet inlet flow fields using anti-diffusive WENO Navier-Stokes solver
Juan-Chen Huang, Jaw-Yen Yang, Yu-Hsuan Lai, Jeng-Shan Guo
Numerical study of effects of accommodation coefficients on slip phenomena
Young Jae Choi, Oh Joon Kwon
Vibration control of rotor system by ultrasonic excited limiter
Hongliang Yao, Qian Zhao, Hao Wu, Bangchun Wen
Multipole expansion of Green’s function for guided waves in a transversely isotropic plate
Heung Son Lee, Yoon Young Kim
The influence of lateral shock absorber valve parameters on vehicle dynamic performance
Qian Xiao, Qinghua Li, Chao Chang
Dynamic analysis of a megawatt wind turbine drive train
Caichao Zhu, Shuang Chen, Chaosheng Song, Huaiju Liu, Houyi Bai, Fei Ma
Solar array deployment analysis considering path-dependent behavior of a tape spring hinge
Kyung-Won Kim, Youngjin Park
Effect of oscillator and initial condition differences in the dynamics of a ring of dissipative coupled van der Pol oscillators
V. Vinod, Bipin Balaram, M. D. Narayanan, Mihir Sen
Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force
Perowansa Paruka, Waluyo Adi Siswanto, Md Abdul Maleque, Mohd Kamal Mohd Shah
An experimental study on the performance and fatigue life of pitch bearing for wind turbine
Jeong Woo Han, Ju Seok Nam, Young Jun Park, Geun Ho Lee, Yong Yun Nam
Effects of defect size on failure of butt fusion welded MDPE pipe under tension
Huan Sheng Lai, Seong Hee Kil, Kee Bong Yoon
Improvement of the instability of compressible lattice Boltzmann model by shock-detecting sensor
Vahid Esfahanian, Mohsen Ghadyani
Design and testing of low-divergence elliptical-jet nozzles
Etienne Rouly, Andrew Warkentin, Robert Bauer
Characteristics of unsteady flow field and aeroacoustic noise in a regenerative blower
Tae-Gyun Lim, Sang-Moon Lee, Wan-Ho Jeon, Choon-Man Jang
Development of a metamodel assisted sampling approach to aerodynamic shape optimization problems
Amir Safari, Adel Younis, Gary Wang, Hirpa Lemu, Zuomin Dong
Influence of stator vane number on performance of the axial-flow pump
Can Kang, Xiaojie Yu, Weifeng Gong, Changjiang Li, Qifeng Huang
The reliability of finite element analysis results of the low impact test in predicting the energy absorption performance of thin-walled structures
R. Alipour, A. Farokhi Nejad, S. Izman
Comparison of the mechanical performance between two-stage and flat-face cutter head for the rock tunnel boring machine (TBM)
Geng Qi, Wei Zhengying, He Fei, Meng Hao
A novel algorithm for kinematic and dynamic optimal synthesis of planar four-bar mechanisms with joint clearance
H. M. Daniali, S. M. Varedi, M. Dardel, A. Fathi
Thermo-mechanical stress analysis in platelet reinforced composites with bonded and debonded platelet end
A. M. Fattahi, E. Moaddab, N. Bibishahrbanoei
Free vibration of symmetric angle ply truncated conical shells under different boundary conditions using spline method
K. K. Viswanathan, Z. A. Aziz, Saira Javed, Y. Yaacob, Babuji Pullepu
Numerical approach to joule heating analysis for electrical parts using MSC Marc
Sung-Hoon Kim, Kyung-Won Lee
Experimental study on bump-foil gas bearing with different diametric clearance configurations
Yu Hou, Bin Ma, Shanju Yang, Xingya Chen, Yueqing Zheng, Shuangtao Chen
A kind of balance between exploitation and exploration on kriging for global optimization of expensive functions
Huachao Dong, Baowei Song, Peng Wang, Shuai Huang
Efficient smoothed particle hydrodynamics method for the analysis of planar structures undergoing geometric nonlinearities
Hakim Naceur, Jun Lin, Daniel Coutellier, Abdel Laksimi
Contact behavior analysis of elastomeric x-ring under uniform squeeze rate and internal pressure before and after forcing-out using the photoelastic experimental hybrid method
Alunda Ouma Bernard, Jai-Sug Hawong, Dong-Chul Shin, Bai Dong
Theoretical research and experimental study for a new measurement method of standing wave levitation force
Xinbo Li, Hai Jiang, Xiaoyang Jiao, Kai Zhang, Guojun Liu, Jianfang Liu
Miniaturization of automobile radiator by using zinc-water and zinc oxide-water nanofluids
B. K. Sonage, P. Mohanan
Prediction enhancement of the J-lead interconnection reliability of land grid array sockets
Jinae Lee, Hyung Wook Park
Evaluation of a pyramid die extrusion for a hollow aluminum profile using FE simulation
Liang Chen, Guoqun Zhao, Junquan Yu, Wendong Zhang
Investigation of the polishing characteristics of metal materials and development of micro MR fluid jet polishing system for the ultra precision polishing of micro mold pattern
Jung-Won Lee, Seok-Jae Ha, Yong-Kyu Cho, Ki-Beom Kim, Myeong-Woo Cho
Investigation of near dry EDM compared with wet and dry EDM processes
Ahad Gholipoor, Hamid Baseri, Mohammad Reza Shabgard
Stable control of the bicycle robot on a curved path by using a reaction wheel
Yunki Kim, Hyunwoo Kim, Jangmyung Lee
Evaluation of real-time ice concentration inside pipeline by the refractive index method
Donggyu Lee, Dong-Yeol Chung, Chaedong Kang, Jong-Hyeon Peck
Experimental study on heat transfer characteristics of water-spray-bed heat exchanger
Sung Kook Hong, Sang-il Park, Soo-Yeon Jeon, Kwan-Soo Lee
Effects of DME mixing on number density and size properties of soot particles in counterflow non-premixed ethylene flames
J. H. Choi, B. C. Choi, S. M. Lee, S. H. Chung, K. S. Jung, W. L. Jeong, S. K. Choi, S. K. Park
Experimental study on the water inlet and outlet position of a solar collector reservoir for maximum efficiency
S. Khodadadi, A. Ghanavati, M. R. Assari, M. Hatami, D. D. Ganji