Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 5/2020

Ausgabe 5/2020

Inhaltsverzeichnis ( 47 Artikel )

30.04.2020 | Original Article | Ausgabe 5/2020

Simulation and validation of crack propagation using fracture energy concept for thin aluminum foils

Fabian Guse, Katharina Schmitz

30.04.2020 | Original Article | Ausgabe 5/2020

Stability analysis of an axially moving free-free beam

Han Guangcai, Liu Fei, Wu Yanhong, Wang Wei

30.04.2020 | Original Article | Ausgabe 5/2020

Experimental investigation of shear stress effect on the flexural behavior of aluminum foam beam

Farid Triawan, Rihito Nakagawa, Kazuaki Inaba, Bentang Arief Budiman, Kikuo Kishimoto

30.04.2020 | Original Article | Ausgabe 5/2020

Effect of strain-rate and moisture content on the mechanical properties of adhesively bonded joints

M. Johar, K. J. Wong, S. A. Rashidi, M. N. Tamin

30.04.2020 | Original Article | Ausgabe 5/2020

Numerical modeling of microcrack behavior in encapsulation-based self-healing concrete under uniaxial tension

Luthfi Muhammad Mauludin, Bentang Arief Budiman, Sigit Puji Santosa, Xiaoying Zhuang, Timon Rabczuk

30.04.2020 | Original Article | Ausgabe 5/2020

Thermo-mechanical fatigue characteristics of CMSX-4 applied to the high-pressure turbine first-stage single-crystal rotor blade

Jaegu Choi, Sunguk Wee, Jae-Mean Koo, Eui-Suck Chung, Suk-Hwan Kwon, Chang-Sung Seok

30.04.2020 | Original Article | Ausgabe 5/2020

Dimensional analysis of a rotor system through FRF using transfer function and finite element methods

Dyah Kusuma Dewi, Zainal Abidin, Bagus Budiwantoro, Jhon Malta

30.04.2020 | Original Article | Ausgabe 5/2020

On the importance of the bullet jacket during the penetration process: Reversed-ballistic experimental and numerical study

Denny Lesmana, Faizal Arifurrahman, Amer Hameed, G. J. Appleby-Thomas, Sigit P. Santosa

01.05.2020 | Original Article | Ausgabe 5/2020

The effect of low-velocity impact on the flexural strength of E-glass/epoxy composite plates

Pham Xuan Quang, Satrio Wicaksono, Tatacipta Dirgantara, Bambang Kismono Hadi

30.04.2020 | Original Article | Ausgabe 5/2020

Carbon nanotubes influenced indium oxide as photoanode for dye-sensitized solar cell

Savisha Mahalingam, Huda Abdullah, Abreeza Manap

30.04.2020 | Original Article | Ausgabe 5/2020

Countermeasures design and analysis for occupant survivability of an armored vehicle subjected to blast load

Arief Nur Pratomo, Sigit Puji Santosa, Leonardo Gunawan, Ichsan Setya Putra

30.04.2020 | Original Article | Ausgabe 5/2020

A modified SOM method based on nonlinear neural weight updating for bearing fault identification in variable speed condition

Zitong Zhou, Jinglong Chen, Yanyang Zi, Tong An

30.04.2020 | Original Article | Ausgabe 5/2020

Acoustically monitoring defects on rotating turbine blades

Hongrae Jo, Yeongmin Kim, Daeseong Jo

01.05.2020 | Original Article | Ausgabe 5/2020

A novel fault diagnosis method based on EMD, cyclostationary, SK and TPTSR

Yijie Niu, Jiyou Fei, Yuanyuan Li, Deng Wu

30.04.2020 | Original Article | Ausgabe 5/2020

Dynamic model of four degree of freedom rope-driven rigid-flexible hybrid wave compensation device

Liang Tang, Yuan Chen

30.04.2020 | Original Article | Ausgabe 5/2020

A fault diagnosis method using Interval coded deep belief network

Jiahui Tang, Jimei Wu, Bingbing Hu, Chang Guo, Jialing Zhang

30.04.2020 | Original Article | Ausgabe 5/2020

Dynamic optimization design of the suspension parameters of car body-mounted equipment via analytical target cascading

Jie Chen, Yangjun Wu, Limin Zhang, Xiaolong He, Shijie Dong

01.05.2020 | Original Article | Ausgabe 5/2020

Evaluation of harmless crack size by Ando’s equation

Min-Heon Kim, Jae-Yong Hyun, Ki-Woo Nam

30.04.2020 | Original Article | Ausgabe 5/2020

Experimental and numerical analysis of failure in flexible pipe by a mechanism of intentional damage

Marco A. Hernández-Rojo, Jorge L. Alamilla-Lopez, M. A. Dominguez-Aguilar, Eliceo Sosa-Hernández

30.04.2020 | Original Article | Ausgabe 5/2020

A new contour method for rapid evaluation of the cross-sectional residual stress distribution in complex geometries using a 3D scanner

Huai Wang, Dong-Kyu Kim, Wanchuck Woo, Shi-Hoon Choi, Soo Yeol Lee, Sun-Kwang Hwang

30.04.2020 | Original Article | Ausgabe 5/2020

Asymptotic creep deformation behavior of modified HP steel after long-term service

Jong Min Yu, Van Hung Dao, Vanno Lok, Thi Giang Le, Kee Bong Yoon

30.04.2020 | Original Article | Ausgabe 5/2020

Microstructure and mechanical properties evaluation of friction stir welded boron steel

Hrishikesh Das, Mounarik Mondal, Sung-Tae Hong, Kwang-Jin Lee, Kinnor Chattopadhyay

30.04.2020 | Original Article | Ausgabe 5/2020

Establishment of erosion model of gun steel material and study on its erosion performance

Libo Zou, Cungui Yu, Guangbin Feng, Jianlin Zhong, Yan Lv

30.04.2020 | Original Article | Ausgabe 5/2020

Effect of different parameters and aging time on wear resistance and hardness of SiC-B4C reinforced AA6061 alloy

Hussein Alrobei

30.04.2020 | Original Article | Ausgabe 5/2020

Effects of the downstream spatial configuration on the energy extraction performance of tandem/parallel combined oscillating hydrofoils

F. Dahmani, C. H. Sohn

30.04.2020 | Original Article | Ausgabe 5/2020

A numerical approach for assessing flow compressibility and transonic effect on airfoil aerodynamics

Hoang Thi Bich Ngoc

30.04.2020 | Original Article | Ausgabe 5/2020

Numerical study of collision modes of multi-core compound droplets in simple shear flow

Binh D. Pham, Truong V. Vu, Cuong T. Nguyen, Hoe D. Nguyen, Vinh T. Nguyen

30.04.2020 | Original Article | Ausgabe 5/2020

The development of the simultaneous reconstruction of 2D temperature and concentration using a 6-peaks algorithm for CT-TDLAS

Doo-Won Choi, Deog-Hee Doh, Min-Gyu Jeon

30.04.2020 | Original Article | Ausgabe 5/2020

Multiphysics simulation of paper curl due to moisture transport

Gil Ho Yoon, Byoungho Yoo, Woon Kyung Kim, Junseong Woo, Taehan Kim, Seungjun Lee

30.04.2020 | Original Article | Ausgabe 5/2020

Seismic performance evaluation of 72.5 kV GIS for design verification (I) - Seismic test

HeuiSub Ahn, Jongung Choi, YoungGeun Kim, Hae-Yong Cho

30.04.2020 | Original Article | Ausgabe 5/2020

Seismic performance evaluation of 72.5 kV GIS for design verification (II) – Seismic analysis

HeuiSub Ahn, Jongung Choi, YoungGeun Kim, Hae-Yong Cho

30.04.2020 | Original Article | Ausgabe 5/2020

Practical bending-angle calculation for an automated surgical plate bending apparatus

Si-Myung Park, Jeonghwan Lee, Seungbin Park, Jung-Woo Lee, Minsoo Park, Youngjun Kim, Gunwoo Noh

01.05.2020 | Original Article | Ausgabe 5/2020

Study on logarithmic crowning of cylindrical roller profile considering angular misalignment

Zhenghai Wu, Yingqiang Xu, Sier Deng, Kaian Liu

30.04.2020 | Original Article | Ausgabe 5/2020

Numerical simulation of bending deformation induced by multi-seam welding of a steel-pipe structure

Chunbiao Wu, Changhoon Lee, Jae-Woong Kim

30.04.2020 | Original Article | Ausgabe 5/2020

Analysis of high speed bearing based on virtual rods model

Guang Zeng, Chunjiang Zhao, Xiaokai Yu, Yufeng Yin, Zhigang Xiao, Yijie Feng

30.04.2020 | Original Article | Ausgabe 5/2020

Monitoring of thermal damages upon grinding of hardened steel using Barkhausen noise analysis

Ashish Srivastava, Akash Awale, Meghanshu Vashista, Mohd Zaheer Khan Yusufzai

30.04.2020 | Original Article | Ausgabe 5/2020

Simulation and experimental analysis of abrasive fluidized bed machining process

Taekyoung Kim, Hyunseop Lee

30.04.2020 | Original Article | Ausgabe 5/2020

A novel data-driven rollover risk assessment for articulated steering vehicles using RNN

Xuanwei Chen, Wei Chen, Liang Hou, Huosheng Hu, Xiangjian Bu, Qingyuan Zhu

30.04.2020 | Original Article | Ausgabe 5/2020

Workspace mapping with adaptive fuzzy control for robotic manipulator in teleoperation

Tae Mun Park, Sang Ryong Lee, Hak Yi

30.04.2020 | Original Article | Ausgabe 5/2020

The effect of rotating receiver hole shape on a gas turbine pre-swirl system

Jungsoo Lee, Hyungyu Lee, Donghwa Kim, Jinsoo Cho

30.04.2020 | Original Article | Ausgabe 5/2020

Parametric study on the local current distribution of polymer electrolyte membrane fuel cell with counter flow channel under pressurized condition

Young Sang Kim, Dong Kyu Kim, Kook Young Ahn, Min Soo Kim

30.04.2020 | Original Article | Ausgabe 5/2020

Investigation of photovoltaic thermoelectric air-conditioning system for room application under tropical climate

Kar Kin Looi, Aklilu Tesfamichael Baheta, Khairul Habib

30.04.2020 | Original Article | Ausgabe 5/2020

Numerical study of heat and mass transfer by reverse water-gas shift reaction in catalyst-coated microchannel reactor

Sangho Sohn, Seok Ho Yoon

30.04.2020 | Original Article | Ausgabe 5/2020

Effect of heat exchanger materials on the performance of adsorption chiller

Ngoc Vi Cao, Xuan Quang Duong, Woo Su Lee, Moon Yong Park, Jae Dong Chung, Hiki Hong

30.04.2020 | Original Article | Ausgabe 5/2020

Effect of anisotropic structure of gas diffusion layer on the cathode dead-end mode of polymer electrolyte membrane fuel cells for the submarine

Jeong-hoon Seo, Dong Kyu Kim

30.04.2020 | Original Article | Ausgabe 5/2020

Effects of different pretreatment methods on the grindability of pitch pine sawdust biomass and its blends with coal

Lkhagvadorj Sh, Byoung-Hwa Lee, Tae-Yong Jeong, Chung-Hwan Jeon

30.04.2020 | Original Article | Ausgabe 5/2020

Metalized solid propellant combustion under high-speed blowing flow

Krainov Alexey, Poryazov Vasiliy, Moiseeva Ksenia, Krainov Dmitry

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise