Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 6/2020

Ausgabe 6/2020

Inhaltsverzeichnis ( 41 Artikel )

30.05.2020 | Original Article | Ausgabe 6/2020

Curvature enhanced bearing fault diagnosis method using 2D vibration signal

Weifang Sun, Xincheng Cao

01.06.2020 | Original Article | Ausgabe 6/2020

Optimization method of vehicle handling stability based on response surface model with D-optimal test design

Bo Li, Wenqing Ge, Dechuan Liu, Cao Tan, Binbin Sun

01.06.2020 | Original Article | Ausgabe 6/2020

Dynamic responses after rotor drops onto a new-type active eliminating protective clearance touchdown bearing

Yili Zhu, Yanhong Zhang, Chengtao Yu

30.05.2020 | Original Article | Ausgabe 6/2020

Influence of coupling approximation on the numerical stability of explicit co-simulation

Pu Li, Qi Yuan

30.05.2020 | Original Article | Ausgabe 6/2020

Force transmission performance for a novel deformation wheel with crank slider mechanism

Kongshu Deng, Hailiang Wu, Yicheng Ding, Lu Zeng, Zhurong Yin, Dilei Qian

30.05.2020 | Original Article | Ausgabe 6/2020

Rolling bearing fault convolutional neural network diagnosis method based on casing signal

Xiangyang Zhang, Guo Chen, Tengfei Hao, Zhiyuan He

30.05.2020 | Original Article | Ausgabe 6/2020

A new creep model and its application in the evaluation of creep properties of a titanium alloy at 500 °C

Wenming Ye, Xuteng Hu, Yingdong Song

30.05.2020 | Original Article | Ausgabe 6/2020

Determination the efficiency of open mixing screws

Attila Varga, Istvan Keppler, Laszlo Fenyvesi

30.05.2020 | Original Article | Ausgabe 6/2020

A novel sensor using photo-interrupter for measuring static friction coefficient

Abbas Hussain, Omer Subasi, Ismail Lazoglu

30.05.2020 | Original Article | Ausgabe 6/2020

The needs of power spectral density in fatigue life prediction of heavy vehicle leaf spring

Lennie Abdullah, Salvinder Singh Karam Singh, Shahrum Abdullah, Abdul Hadi Azman, Ahmad Kamal Ariffin, Yat Sheng Kong

30.05.2020 | Original Article | Ausgabe 6/2020

Long-term durability of offshore wind turbine composite blades based on nonlinear load behavior due to pitch movement

Yun-Jung Jang, Ji-Won Jin, Jang-Ho Lee, Sang-Il Lee, Ki-Weon Kang

30.05.2020 | Original Article | Ausgabe 6/2020

Mechanical plugging—solid expandable tubular refracturing technology

Xiaohua Zhu, Feilong Cheng, Changshuai Shi, Kailin Chen

30.05.2020 | Ausgabe 6/2020

The relationship between eccentric structure and super-lift device of all-terrain crane based on the overall stability

Yao Fenglin, Meng Wenjun, Zhao Jie, Shi Guoshan, Bai Yanqiang, Li Hui, Cui Yaodong

30.05.2020 | Original Article | Ausgabe 6/2020

Effect of over/under-expanding on the mechanical behavior in provisional stenting using bioresorbable scaffold

Jang Yong Kim, Sungsu Park, Pruthvi Serrao

30.05.2020 | Original Article | Ausgabe 6/2020

Design optimization for mixed-flow pump impeller by improved suction performance and efficiency with variables of specific speeds

Sung Kim, Yong-In Kim, Jin-Hyuk Kim, Young-Seok Choi

30.05.2020 | Original Article | Ausgabe 6/2020

A numerical study on gas-to-particle and particle-to-particle heat transfer in a conical fluidized bed reactor

Mohamed Y. Hashim, Hamada M. Abdelmotalib, Jong Seok Kim, Dong Guk Ko, Ik-Tae Im

01.06.2020 | Original Article | Ausgabe 6/2020

Performance analysis of radial-inflow turbine of ORC: New combined approach of preliminary design and 3D CFD study

Angie L. Espinosa Sarmiento, Ramiro G. Ramirez Camacho, Waldir de Oliveira

01.06.2020 | Original Article | Ausgabe 6/2020

Investigations on the effect of guide vane thickness and solidity on shock and unsteady flow characteristic of VNT

Dengfeng Yang, Li’ang Cao, Ce Yang, Dazhong Lao, Harold Sun

30.05.2020 | Original Article | Ausgabe 6/2020

Passive increase in driving force in vortex-induced vibration of a semi-hollow cylinder for Reynolds number 200

Seungmin Kang, Sungmin Ryu

30.05.2020 | Original Article | Ausgabe 6/2020

Simulation of the mushroom cloud generated from a high-energy explosion using large-eddy simulation

Sungjin Won, Changhoon Lee

01.06.2020 | Original Article | Ausgabe 6/2020

A simplified design approach for high-speed wind tunnels. Part I: Table of inclination

Ali Arshad, Supun Samarasinghe, F. A. M. Akeel, Aleksandrs Urbahs

30.05.2020 | Original Article | Ausgabe 6/2020

Three-dimensional finite element analysis for prevailing torque of bolt-nut connection having slight pitch difference

Nao-Aki Noda, Xi Liu, Yoshikazu Sano, Kosuke Tateishi, Biao Wang, Yasushi Takase

01.06.2020 | Original Article | Ausgabe 6/2020

A hybrid finite element and analytical model for determining the mesh stiffness of internal gear pairs

Shuo Feng, Lehao Chang, Zhaoxia He

30.05.2020 | Original Article | Ausgabe 6/2020

Numerical study on crack propagation simulation in functionally graded materials by enriched natural element method

Jin-Rae Cho

30.05.2020 | Original Article | Ausgabe 6/2020

Effective velocity range of theoretical hypervelocity penetration models

Youngku Kang, Hyo-Chol Sin

30.05.2020 | Original Article | Ausgabe 6/2020

A study on the condition based maintenance evaluation system of smart plant device using convolutional neural network

Mi-Kyeong Shin, Woo Jin Jo, Hye Min Cha, Soo-Hong Lee

30.05.2020 | Original Article | Ausgabe 6/2020

High-efficiency technique for five-axis side milling of niemann worm wheels

Haibing Wu, Zheng Zhang, Quanping Sun

30.05.2020 | Original Article | Ausgabe 6/2020

An investigation into performance of electric discharge milling using slotted tools

Satish Mullya, Ganesh Karthikeyan, Vaibhav Ganachari

01.06.2020 | Original Article | Ausgabe 6/2020

Microstructural analysis, radiography, tool wear characterization, induced residual stress and corrosion behavior of conventional and cryogenic trepanning of DSS 2507

C. Chandrasekhara Sastry, M. Abeens, N. Pradeep, M. A. Muthu Manickam

30.05.2020 | Original Article | Ausgabe 6/2020

Mechanism study of micro-electrical discharge drilling method during micro-dimpling

Sang Tae Jung, Rendi Kurniawan, S. Thirumalai Kumaran, In Jun Yoon, Tae Jo Ko

30.05.2020 | Original Article | Ausgabe 6/2020

Characteristics analysis of supporting and locking mechanism based on the non-circular gear compound transmission

Chao Lin, Yanan Hu, Yanqun Wei, Zhiqin Cai

30.05.2020 | Original Article | Ausgabe 6/2020

Map-merging using maximal empty rectangles in a multi-robot SLAM process

Shahram Hadian Jazi

30.05.2020 | Original Article | Ausgabe 6/2020

Zero-power balancing a two-link robot manipulator for a predefined point-to-point task

Mojtaba Riyahi Vezvari, Amin Nikoobin, Ali Ghoddosian

30.05.2020 | Original Article | Ausgabe 6/2020

Employing variable impedance (stiffness/damping) hybrid actuators on lower limb exoskeleton robots for stable and safe walking trajectory tracking

Ozgur Baser, Hasbi Kizilhan, Ergin Kilic

01.06.2020 | Original Article | Ausgabe 6/2020

Increase of power generation from solar cell module by controlling its module temperature with phase change material

Vat Sun, Attakorn Asanakham, Thoranis Deethayat, Tanongkiat Kiatsiriroat

30.05.2020 | Original Article | Ausgabe 6/2020

Effect of providing gap in multiple-arc rib-roughened solar air heater - Part 1

Rajneesh Kumar, Varun Goel, Mukesh Kumar

30.05.2020 | Original Article | Ausgabe 6/2020

Investigating the performance of ice slurry system and the growth of ice crystals using seawater

F. A. Rayhan, A. S. Pamitran, Yanuar, M. P. Patria

30.05.2020 | Original Article | Ausgabe 6/2020

An improved correlation to predict the heat transfer in pulsating heat pipes over increased range of fluid-filling ratios and operating inclinations

Foster Kwame Kholi, Alberto Mucci, Hariharan Kallath, Man Yeong Ha, Jason Chetwynd-Chatwin, June Kee Min

30.05.2020 | Original Article | Ausgabe 6/2020

Correction strategy of fuel injection quantity during pilot-main injection for common rail system

Yun Bai, Yuanqi Gu, Qi Lan, Liyun Fan, Xiuzhen Ma

30.05.2020 | Original Article | Ausgabe 6/2020

The effects of bore-stroke ratio on effective release energy, residual gas, peak pressure rise and combustion duration of a V-twin engine

Nguyen Xuan Khoa, Ock Teack Lim

30.05.2020 | Original Article | Ausgabe 6/2020

Acquisition of point cloud in CT image space to improve accuracy of surface registration: Application to neurosurgical navigation system

Hakje Yoo, Ahnryul Choi, Joung Hwan Mun

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise