Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 7/2016

Ausgabe 7/2016

Inhaltsverzeichnis ( 54 Artikel )

01.07.2016 | Ausgabe 7/2016

Robust control of nonlinear integrated ride and handling model using magnetorheological damper and differential braking system

Ali Fellah Jahromi, Wen Fang Xie, Rama B. Bhat

01.07.2016 | Ausgabe 7/2016

An investigation of energy efficiency of a wheel loader with automated manual transmission

Kwangseok Oh, Seungjae Yun, Kyungeun Ko, Panyoung Kim, Jaho Seo, Kyongsu Yi

01.07.2016 | Ausgabe 7/2016

Output-only modal identification based on hierarchical Hough transform

Yi Jin, Shaoqian Qin, Jie Guo, Chang’an Zhu

01.07.2016 | Ausgabe 7/2016

Dynamic modeling and analysis of axial vibration of a coupled propeller and shaft system

Chenyang Li, Xiuchang Huang, Hongxing Hua

01.07.2016 | Ausgabe 7/2016

Bifurcation and chaotic vibration for an electromechanical integrated harmonic piezodrive system

Chong Li, Lizhong Xu, Jianqiao Zhang

01.07.2016 | Ausgabe 7/2016

Identification of the dynamic parameters of active magnetic bearings based on the transfer matrix model updating method

Yuanping Xu, Jin Zhou, Chaowu Jin, Qintao Guo

01.07.2016 | Ausgabe 7/2016

Natural frequency extraction of a beam-moving mass system with periodic passages using its pseudo-natural frequencies

Esmaeil Ghorbani, Mehdi Keshmiri

01.07.2016 | Ausgabe 7/2016

Seismic analysis and parametric study of SDOF lead-rubber bearing (LRB) isolation systems with recentering shape memory alloy (SMA) bending bars

Jong Wan Hu

01.07.2016 | Ausgabe 7/2016

Application of radial basis functions and sinc method for solving the forced vibration of fractional viscoelastic beam

M. R. Permoon, J. Rashidinia, A. Parsa, H. Haddadpour, R. Salehi

01.07.2016 | Ausgabe 7/2016

Spectral analysis of dynamic response of a thin beam subjected to a varying speed moving mass

Morteza Tahmasebi Yamchelou, Gholamreza Nouri

01.07.2016 | Ausgabe 7/2016

A Vectorial-Wave Method for free and forced vibration analysis of extra thin cylindrical shells with boundary discrete damping

Reza Poultangari, Mansour Nikkhah-Bahrami

01.07.2016 | Ausgabe 7/2016

Oil film stiffness and damping in an elastohydrodynamic lubrication line contact-vibration

Yuanyuan Zhang, Huaiju Liu, Caichao Zhu, Mingyong Liu, Chaosheng Song

01.07.2016 | Ausgabe 7/2016

Two modelling techniques for the vibration and transmission loss of a nonlinear vibro-acoustic system

Yiu-Yin Lee

01.07.2016 | Ausgabe 7/2016

Dynamic modeling of a high-speed over-constrained press machine

Yejian Li, Yu Sun, Binbin Peng, Fengfeng Hu

01.07.2016 | Ausgabe 7/2016

High-precision modeling and simulation of the taper leaf spring of tandem suspension of commercial vehicles

Liang Duan, Chuanxue Song, Shukai Yang, Shiqi Fan, Bingwu Lu

01.07.2016 | Ausgabe 7/2016

Solution region synthesis method of planar one-dof six-bar linkages for specifying 4-positions of a 3R open chain

Yang Tong, Han Jianyou

01.07.2016 | Ausgabe 7/2016

Physical interpretation of the J 2 integral by identifying the associated crack translation

Cong Hao Liu, Seok Jae Chu

01.07.2016 | Ausgabe 7/2016

Thermal deformation analysis of tabbed solar cells using solder alloy and conductive film

Md. Kamrul Hasan, Katsuhiko Sasaki

01.07.2016 | Ausgabe 7/2016

Coupling method of magnetic memory and eddy current nondestructive testing for retired crankshafts

Chen Ni, Lin Hua, Xiaokai Wang, Zhou Wang, Xunpeng Qin, Zhou Fang

01.07.2016 | Ausgabe 7/2016

Energy absorption of aluminum alloy thin-walled tubes under axial impact

Hongtu Sun, Jian Wang, Guozhe Shen, Ping Hu

01.07.2016 | Ausgabe 7/2016

Pad surface and coefficient of friction correlation analysis during friction between felt pad and single-crystal silicon

Woongkirl Choi, Seonghyun Kim, Seunggeon Choi, Eunsang Lee

01.07.2016 | Ausgabe 7/2016

Investigation of composite coating effectiveness on stress intensity factors of cracked composite pressure vessels

Mahdi Fakoor, Seyed Mohammad Navid Ghoreishi, Nabi Mehri Khansari

01.07.2016 | Ausgabe 7/2016

Significance of cyclic loading parameters on the flexural response of the GFRP composites

T. G. Loganathan, R. Krishnamurthy, K. Chandrasekaran

01.07.2016 | Ausgabe 7/2016

Contribution of functionally graded material modelling on finite element simulation of rod end parts in automotive steering system

Serkan Toros, Kayhan Altinel

01.07.2016 | Ausgabe 7/2016

Finite element structural analysis of self-expandable stent deployment in a curved stenotic artery

Taeksu Jung, Jang Yong Kim

01.07.2016 | Ausgabe 7/2016

Characterization of the Q* parameter for evaluating creep crack growth rate for type 316LN stainless steel

I. M. W. Ekaputra, Woo-Gon Kim, Jae-Young Park, Seon-Jin Kim, Eung-Seon Kim

01.07.2016 | Ausgabe 7/2016

Projection of the rotation form Navier-Stokes equation onto the half-staggered grid

Ji Ryong Cho

01.07.2016 | Ausgabe 7/2016

Numerical investigation of interaction between rising bubbles in a viscous liquid

Ikroh Yoon, Seungwon Shin

01.07.2016 | Ausgabe 7/2016

Effects of the number of inducer blades on the anti-cavitation characteristics and external performance of a centrifugal pump

XiaoMei Guo, ZuChao Zhu, BaoLing Cui, GaoPing Shi

01.07.2016 | Ausgabe 7/2016

Aerodynamic shape study of supersonic surface to surface missiles with continuous flexible nose

Abbas Khalghani, Mahmoud Pasandideh-Fard, Mohamad Hasan Djavareshkian

01.07.2016 | Ausgabe 7/2016

Experimental investigation of inception cavitating flows around axisymmetric bodies with different headforms

Changli Hu, Guoyu Wang, Xuede Wang, Biao Huang

01.07.2016 | Ausgabe 7/2016

Influence of slip velocity in Herschel-Bulkley fluid flow between parallel plates - A mathematical study

D. S. Sankar, Usik Lee

01.07.2016 | Ausgabe 7/2016

Effects of the Reynolds number on two-dimensional dielectrophoretic motions of a pair of particles under a uniform electric field

Sangmo Kang, Madhusoodanan Mannoor, Ranjith Maniyeri

01.07.2016 | Ausgabe 7/2016

Flow structure and flow-induced noise in an axisymmetric cavity with lids

Seo Yoon Jung, Hyung Jin Sung

01.07.2016 | Ausgabe 7/2016

Bumper shape design for pedestrian safety

Tso-Liang Teng, Cho-Chung Liang, Tuan-Anh Vu

01.07.2016 | Ausgabe 7/2016

A parametric CAD-based method for modelling and simulation of positive displacement machines

Francesco Gherardini, Barbara Zardin, Francesco Leali

01.07.2016 | Ausgabe 7/2016

FEM of residual stress and surface displacement of a single shot in high repetition laser shock peening on biodegradable magnesium implant

Hossein Kamkarrad, Sivakumar Narayanswamy

01.07.2016 | Ausgabe 7/2016

A TGA study of CO2 gasification reaction of various types of coal and biomass

Tahereh Jalalabadi, Chengguo Li, Hakgyu Yi, Donggeun Lee

01.07.2016 | Ausgabe 7/2016

SOMEDGRA: A case retrieval method for machine tool product configuration design

Pengjia Wang, Yadong Gong, Hualong Xie, Yongxian Liu

01.07.2016 | Ausgabe 7/2016

Experimental and FE simulation validation of sheet thickness optimization in superplastic forming of Al alloy

G. Kumaresan, A. Jothilingam

01.07.2016 | Ausgabe 7/2016

Configuration design and accuracy analysis of a novel magnetorheological finishing machine tool for concave surfaces with small radius of curvature

Henan Liu, Mingjun Chen, Bo Yu, Zhen Fang

01.07.2016 | Ausgabe 7/2016

Effect of elastic-plastic behavior of coating layer on drawability and frictional characteristic of galvannealed steel sheets

Seongwon Lee, Mansoo Joun, Donghwan Kim, Jungmin Lee

01.07.2016 | Ausgabe 7/2016

Collision-avoidance trajectory planning for a virtual kinesthetic feedback system

Kun Wang, Clement Gosselin, Xuan Wu, Qiuju Zhang, Ke Li

01.07.2016 | Ausgabe 7/2016

Barrier Lyapunov function-based model-free constraint position control for mechanical systems

Seong Ik Han, Hyunuk Ha, Jangmyung Lee

01.07.2016 | Ausgabe 7/2016

Experimental investigation of the reverse heat transfer of R134a flow through non-adiabatic coiled capillary tubes

Masoud Zareh, Mohammad Ghorbani Heidari

01.07.2016 | Ausgabe 7/2016

Improvement of collection efficiency and solar fraction in solar thermal storage system using a 3-way valve and a 2-stage flowrate control

Jong Hyun Kim, Uk Jae Lee, LongJie Li, Chul Kim, Hiki Hong

01.07.2016 | Ausgabe 7/2016

Modelling and experimental validation for off-design performance of the helical heat exchanger with LMTD correction taken into account

Nguyen Minh Phu, Nguyen Thi Minh Trinh

01.07.2016 | Ausgabe 7/2016

Analysis upon fuel injection quantity variation of common rail system for diesel engines

Liyun Fan, Yun Bai, Xiuzhen Ma, Enzhe Song

01.07.2016 | Ausgabe 7/2016

Development of new evacuation model (BR-radiation model) through an experiment

Sungryong Bae, Jun-Ho Choi, Chobok Kim, Won-hwa Hong, Hong Sun Ryou

01.07.2016 | Ausgabe 7/2016

Effect of ash fraction and particle size on ash deposition during pulverized coal combustion

Ho Lim, Lkhagvadorj Shagdarsuren, Chang-Hee Oh, Byoung-Hwa Lee, Chung-Hwan Jeon

01.07.2016 | Ausgabe 7/2016

Flight paths for a regenerative fuel cell based high altitude long endurance unmanned aerial vehicle

Moon-Yong Cha, Minjin Kim, Young-Jun Sohn, Tae-Hyun Yang, Seung-Gon Kim

01.07.2016 | Ausgabe 7/2016

Effect of crack size on gas leakage characteristics in a confined space

Kun Hyuk Sung, Joo Won Bang, Longnan Li, Jinwook Choi, Daejoong Kim, Hong Sun Ryou, Kee Bong Yoon, Seong Hyuk Lee

01.07.2016 | Ausgabe 7/2016

Atomistic analysis of ATP hydrolysis effect on a dynein walking mechanism

Soojin Jo, Min Hyeok Kim, Jae Boong Choi, Moon Ki Kim

01.07.2016 | Erratum | Ausgabe 7/2016

Erratum to “Estimation of the saw-tooth shock wave using a lead shock programmer”

Tae-Ho Yang, Young-Shin Lee, Kon-Whi Yeon, Hyun-Myung Kim, Jun-Yeop Kim, Hyuk-Beom Kwon

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise