Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 7/2020

Ausgabe 7/2020

Inhaltsverzeichnis ( 40 Artikel )

01.07.2020 | Original Article | Ausgabe 7/2020

The multidirectional vibration and coupling dynamics of drill string and its influence on the wellbore trajectory

Lin Yang, Jialin Tian, Qingyou Liu, Liming Dai, Zhichao Hu, Jurui Li

01.07.2020 | Original Article | Ausgabe 7/2020

Controller design for active noise control of compressor by using the time window POCS technique

Jeong-Mo Ku, Weui-Bong Jeong, Chinsuk Hong

01.07.2020 | Original Article | Ausgabe 7/2020

Study on the dynamic interaction of multiple clearance joints for flap actuation system with a modified contact force model

Qi Wan, Geng Liu, Chunyu Song, Yong Zhou, Shangjun Ma, Ruiting Tong

01.07.2020 | Original Article | Ausgabe 7/2020

Vibration characteristics investigation of mistuned blisks with receptance substructure component modal synthesis method

Bin Bai, Junyi Zhang, Yanchao Cui, Han Li

01.07.2020 | Original Article | Ausgabe 7/2020

Free vibration analysis of a rotating double-tapered beam using the transfer matrix method

Jung Woo Lee, Jung Youn Lee

01.07.2020 | Original Article | Ausgabe 7/2020

Simulation analysis and optimization design for wide band piezoelectric oscillator of energy harvesting device

Zhen Yu, Chen-yang Zhang, Si-yang Zhang

01.07.2020 | Original Article | Ausgabe 7/2020

Error modeling and accuracy optimization of rotating ultrasonic vibration assisted EDM machine tool

Minggang Xu, Zhiwei Wu, Feng Gao, Linlin Liu, Enyu Song

01.07.2020 | Original Article | Ausgabe 7/2020

Study on fatigue strength of FSW joints of 5083 aluminum alloy with kissing bond defect

Ruijie Wang, Peng Mi

01.07.2020 | Original Article | Ausgabe 7/2020

Parametric optimization in wire electric discharge machining of DC53 steel using gamma phase coated wire

Mudassar Rehman, Sarmad Ali Khan, Rakhshanda Naveed

01.07.2020 | Original Article | Ausgabe 7/2020

Adhesive interface-peeling properties of tapered double cantilever beam bonded with dissimilar material under in-plane and out-of-plane shear conditions

Jung Ho Lee, Chang Ho Jung, Seong Sik Cheon, Jae Ung Cho

01.07.2020 | Original Article | Ausgabe 7/2020

Experiments and simulations of the ballistic response of ceramic composite armors

Jinfeng Cao, Jianzhong Lai, Jiehang Zhou, Ningyu Kang, Longyu Du, Yiqiu Miao

01.07.2020 | Original Article | Ausgabe 7/2020

Mechanical properties of inorganic particle reinforced epoxy composites for gas insulated switchgear

Joo-Eon Park, Bok-Yeol Seok

01.07.2020 | Original Article | Ausgabe 7/2020

Estimation of tensile strain capacity for thin-walled API X70 pipeline with corrosion defects using the fracture strain criteria

Ik-Joong Kim, Yun-Chan Jang, Youn-Young Jang, Ji-Hee Moon, Nam-Su Huh

01.07.2020 | Original Article | Ausgabe 7/2020

Tension and creep rupture behaviors of Alloy 617 thermally aged for a year at 900 °C

Woo-Gon Kim, Injin Sah, Eung-Seon Kim, Seon-Jin Kim, Min-Hwan Kim

01.07.2020 | Original Article | Ausgabe 7/2020

Investigation on effect of thermal aging embrittlement on residual stresses of austenitic stainless steel repair welds in nuclear components subject to seismic loads

Jong-Sung Kim, Maan-Won Kim, Jun-Seok Yang

01.07.2020 | Original Article | Ausgabe 7/2020

Effect of damage evaluation method and cyclic hardening models on strain-based fatigue assessment to a piping system under seismic loads

Dong-Joo Chang, Jong-Min Lee, Hyun-Suk Nam, Nam-Su Huh, Yun-Jae Kim, Hyeong-Do Kweon, Jong-Sung Kim

01.07.2020 | Original Article | Ausgabe 7/2020

Investigation study on the flow-induced noise by winglet and shroud shape of an axial flow fan at an outdoor unit of air conditioner

Tae-Gyun Lim, Jae Hyuk Jung, Wan-Ho Jeon, Won-Gu Joo, Gaku Minorikawa

01.07.2020 | Original Article | Ausgabe 7/2020

The influence of kinematics of blades on the flow structure in deep dynamic stall

Gul Chang, Hamid Reza Karbasian, Shujun Zhang, Yao Yan, Binqi Chen, Kyung Chun Kim

01.07.2020 | Original Article | Ausgabe 7/2020

Numerical analysis of unstable turbulent flows in a centrifugal pump impeller considering the curvature and rotation effect

Weixiang Ye, Zuchao Zhu, Zhongdong Qian, Xianwu Luo

01.07.2020 | Original Article | Ausgabe 7/2020

Investigation of the impact of splitter blades on a low specific speed pump for fluid-induced vibration

Guitao Zeng, Qianqian Li, Peng Wu, Bo Qian, Bin Huang, Shiyang Li, Dazhuan Wu

01.07.2020 | Original Article | Ausgabe 7/2020

Numerical estimation on applying air-trapping mechanism to suppress sloshing loads in a prismatic tank

Hyunjong Kim, Parthasarathy Nanjundan, Junho Jeon, Yeon Won Lee

01.07.2020 | Original Article | Ausgabe 7/2020

Optimal design of a coil gun projectile by analyzing the drag coefficient and electromagnetic force on the projectile

Sejong Kim, Jinho Kim

01.07.2020 | Original Article | Ausgabe 7/2020

Computational investigation of three-faced blade errors on contact behaviors for face-hobbed hypoid gears

Chaosheng Song, Chengcheng Liang, Caichao Zhu, Kunming Liu, Siyuan Liu, Qianhong Huang

01.07.2020 | Original Article | Ausgabe 7/2020

Fuzzy comprehensive performance evaluation method of rolling linear guide based on improved analytic hierarchy process

Yali Ma, Jiayong Wei, Cancan Li, Chen Liang, Guochao Liu

01.07.2020 | Original Article | Ausgabe 7/2020

Development of an active two degree-of-freedom balancer for top loading washing machines

Min-Goo Jeong, In-Yong Kwak, Hyun-Yong Jeong

01.07.2020 | Original Article | Ausgabe 7/2020

Method for automatically generating a two-dimensional triangular mesh of a bone from a CT image considering its density heterogeneity

Byung Chul Kim, Junho Lee, Ki-Youn Kwon

01.07.2020 | Original Article | Ausgabe 7/2020

Design and geometric parameter optimization of hybrid magnetorheological fluid damper

Munyaneza Olivier, Jung Woo Sohn

01.07.2020 | Original Article | Ausgabe 7/2020

On the stable mode selection for efficient component mode synthesis of geometrically nonlinear beams

Yong-Min Jeong, Jun-Sik Kim

01.07.2020 | Original Article | Ausgabe 7/2020

Mold design optimization and quality assessment of steel castings through integrated simulations and experiments

Anwar Khalil Sheikh, Muhammad Azhar Ali Khan

01.07.2020 | Original Article | Ausgabe 7/2020

Stiffness matching method for the ball screw feed drive system of machine tools

Gaiyun He, Panpan Shi, Dawei Zhang, Guangming Sun

01.07.2020 | Original Article | Ausgabe 7/2020

Cutting performance and wear mechanisms of TiAlN PVD-coated cemented carbide tool in high speed turning of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy

Baolin Wang, Anhai Li, Gaihua Liu

01.07.2020 | Original Article | Ausgabe 7/2020

Augmented-reality-assisted workpiece localization in rod-type flexible fixtures

Minh Duc Do, Mingeon Kim, Duy Hung Nguyen, Hae-Jin Choi

01.07.2020 | Original Article | Ausgabe 7/2020

An additive manufacturing benchmark artifact and deviation measurement method

Nikola Vorkapic, Milos Pjevic, Mihajlo Popovic, Nikola Slavkovic, Sasa Zivanovic

01.07.2020 | Original Article | Ausgabe 7/2020

Simulation and experiment study of burrs in micro-milling Zr-based metallic glass

Jiachun Wang, Zhenhong Zhang, Chuang Zhang, Jiabin Fu, Jianchao Chen

01.07.2020 | Original Article | Ausgabe 7/2020

Analysis of temperature distribution in the chip-on-glass bonding process

Won-Soo Yun, Seung Won Jung, Songwan Jin, Young Hun Jeong

01.07.2020 | Original Article | Ausgabe 7/2020

Anti-corrosion wood automatic sorting robot system based on near-infrared imaging technology

Huaxue Jin, Wei Fan, Hua Chen, Yin Wang

01.07.2020 | Original Article | Ausgabe 7/2020

Effect of the aspect ratio of an elliptical cylinder on mixed convective heat transfer within a lid-driven enclosure

Yong Gap Park, Hyun Woo Cho, Gi Su Mun, Man Yeong Ha

01.07.2020 | Original Article | Ausgabe 7/2020

Parametric study of the hydrogenation of dibenzyltoluene and its dehydrogenation performance as a liquid organic hydrogen carrier

Ahsan Ali, Udaya Kumar G, Hee Joon Lee

27.06.2020 | Original Article | Ausgabe 7/2020

Flow and heat transfer characteristics of non-Newtonian fluid in a square enclosure containing an internal cylinder

Sudhanshu Pandey, Yong Gap Park, Man Yeong Ha

27.06.2020 | Original Article | Ausgabe 7/2020

Analysis of swing tempo, swing rhythm, and functional swing plane slope in golf with a wearable inertial measurement unit sensor

Maro Cheon, Batbayar Khuyagbaatar, Jeong-Hwan Yeom, Yoon Hyuk Kim

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise