Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 8/2013

Ausgabe 8/2013

Inhaltsverzeichnis ( 38 Artikel )

01.08.2013 | Ausgabe 8/2013

Discrete optimization of rigid rotor balancing

Tanguy Messager, Mariusz Pyrz

01.08.2013 | Ausgabe 8/2013

Electrical impedance as signal to monitor healthy state of eardrum-like membranes

Jin Xie, Shih-Fu Ling

01.08.2013 | Ausgabe 8/2013

A novel experimental research on vibration characteristics of the running high-speed motorized spindles

Wentao Shan, Xiaoan Chen, Ye He, Jinming Zhou

01.08.2013 | Ausgabe 8/2013

Condition monitoring of naturally damaged slow speed slewing bearing based on ensemble empirical mode decomposition

Wahyu Caesarendra, Prabuono Buyung Kosasih, Anh Kiet Tieu, Craig Alexander Simpson Moodie, Byeong-Keun Choi

01.08.2013 | Ausgabe 8/2013

Numerical and experimental investigation of the bell-mouth inlet design of a centrifugal fan for higher internal flow rate

Sanghyeon Kim, Seung Heo, Cheolung Cheong, Tae-Hoon Kim

01.08.2013 | Ausgabe 8/2013

Cyclic damage model for E-shaped dampers in the seismic isolation system

Dong Keon Kim, Gary F. Dargush, Jong Wan Hu

01.08.2013 | Ausgabe 8/2013

Carbody hunting investigation of a high speed passenger car

Caihong Huang, Jing Zeng, Shulin Liang

01.08.2013 | Ausgabe 8/2013

Multi-stage diagnostic system for reciprocating compressor using DTW technique

H. C. Kim, M. G. Cho, J. Shim

01.08.2013 | Ausgabe 8/2013

Experimental and numerical study on the burst pressure of steam generator tubes with L- and U-type through-wall combination cracks

Kyu In Shin, Kee Bong Yoon, Jai Hak Park

01.08.2013 | Ausgabe 8/2013

Transient analysis of several cracks in an orthotropic material under impact load

M. M. Monfared, M. Ayatollahi

01.08.2013 | Ausgabe 8/2013

Investigation of fatigue properties of shot peened and plasma nitrocarburized P/M FC0205 steel

Ali Başaran, Naci Kurgan, Remzi Varol

01.08.2013 | Ausgabe 8/2013

Effect of induction heating on fatigue life of drive plate for dual mass flywheel

Yong-Jun Lee, Tae-Yang Shim, Kwang-O Lee, Man-Dae Hur, Sung-Su Kang

01.08.2013 | Ausgabe 8/2013

Comparative study on the high-temperature tensile and creep properties of Alloy 617 base and weld metals

Woo-Gon Kim, Jae-Young Park, I. M. W. Ekaputra, Sung-Deok Hong, Seon-Jin Kim, Yong-Wan Kim

01.08.2013 | Ausgabe 8/2013

Lattice Boltzmann simulation of turbulent natural convection in a square cavity using Cu/water nanofluid

H. Sajjadi, M. Beigzadeh Abbassi, GH. R. Kefayati

01.08.2013 | Ausgabe 8/2013

Numerical analysis of interior ballistics through eulerian-lagrangian approach

Jin-Sung Jang, Hyung-Gun Sung, Tae-Seong Roh, Dong-Whan Choi

01.08.2013 | Ausgabe 8/2013

A computational analysis of the airflow in a twin-track subway tunnel with a sliding-curtain to improve ventilation performance

Makhsuda Juraeva, Kyung Jin Ryu, Sang-Hyun Jeong, Dong Joo Song

01.08.2013 | Ausgabe 8/2013

Aerodynamic design and analysis of a small-scale vertical axis wind turbine

Jelena Svorcan, Slobodan Stupar, Dragan Komarov, Ognjen Peković, Ivan Kostić

01.08.2013 | Ausgabe 8/2013

Numerical study on near-stall flow unsteadiness in an axial compressor with casing treatment

Yoojun Hwang, Shin-Hyoung Kang

01.08.2013 | Ausgabe 8/2013

An ultra-high pressure sensor with cylinder structure

Libo Zhao, Xin Guo, Xiawei Meng, Rahman Hebibul, Yulong Zhao, Jianzhu Wang, Zhuangde Jiang

01.08.2013 | Ausgabe 8/2013

Workspace quality analysis and application for a completely restrained 3-Dof planar cable-driven parallel manipulator

Xiaoqiang Tang, Lewei Tang, Jinsong Wang, Dengfeng Sun

01.08.2013 | Ausgabe 8/2013

Development of a geometric modeling tool for rectangular drawbeads in draw dies

Yun Chan Chung

01.08.2013 | Ausgabe 8/2013

A function-behavior-structure framework for quantification and reproduction of emotional haptic experience in using an electronic device

Il-ju Bae, Soo-Hong Lee, Hyung-seok Ok, Jaein Lee

01.08.2013 | Ausgabe 8/2013

Internal stress analysis of a stepped rounded D-ring under a uniform squeeze rate and internal pressure using a photoelastic experimental hybrid method

Bruno Robert Mose, Jeong Hwan Nam, Lim Hyun Seok, Jai-Sug Hawong

01.08.2013 | Ausgabe 8/2013

Static deflection and pull-in instability analysis of an electrostatically actuated mirocantilever gyroscope considering geometric nonlinearities

Mahdi Mojahedi, Mohammad Taghi Ahmadian, Keikhosrow Firoozbakhsh

01.08.2013 | Ausgabe 8/2013

Investigation of the dynamic bending moment transmitted to the forging manipulator due to press motion

Gang Li, Wenjie Sun, Deshi Liu

01.08.2013 | Ausgabe 8/2013

Influence of graphite and machining parameters on the surface roughness of Al-fly ash/graphite hybrid composite: a Taguchi approach

P. Shanmughasundaram, R. Subramanian

01.08.2013 | Ausgabe 8/2013

Genetic algorithm based optimization of the process parameters for gas metal arc welding of AISI 904 L stainless steel

P. Sathiya, P. M. Ajith, R. Soundararajan

01.08.2013 | Ausgabe 8/2013

Experimental modeling and multi-objective optimization of traveling wire electrochemical spark machining (TW-ECSM) process

Basanta Kumar Bhuyan, Vinod Yadava

01.08.2013 | Ausgabe 8/2013

Study of an adaptive fuzzy algorithm to control a rectangular-shaped unmanned surveillance flying car

Kuktae Kim, Kyoil Hwang, Hoonmo Kim

01.08.2013 | Ausgabe 8/2013

Output feedback tracking control of uncertain robot manipulators via higher-order sliding-mode observer and fuzzy compensator

Mien Van, Hee-Jun Kang, Young-Soo Suh, Kyoo-Sik Shin

01.08.2013 | Ausgabe 8/2013

Investigation of the effects of geometrical parameters on heat transfer from buried finned pipes

Hakan Demir, Ahmet Koyun, Ş. Özgür Atayılmaz, Özden Ağra, Ahmet Selim Dalkılıç

01.08.2013 | Ausgabe 8/2013

Effects of equivalence ratio and carbon dioxide concentration on premixed charge compression ignition of gasoline and diesel-like fuel blends

Dong Han, Huanyu Guang, Zheng Yang, Xingcai Lu, Zhen Huang

01.08.2013 | Ausgabe 8/2013

Feasibility study of a hybrid renewable energy system with geothermal and solar heat sources for residential buildings in South Korea

Young-Ju Kim, Nam-Sub Woo, Sung-Cheol Jang, Jeong-Ju Choi

01.08.2013 | Ausgabe 8/2013

Analysis of heat transfer inside wall-joint-fins systems

A. -R. A. Khaled, A. Gari

01.08.2013 | Ausgabe 8/2013

Aerodynamic optimisation of a low-pressure multistage turbine using the response-surface method

Yu Li, Liang Li, Tong Zhao, Jun Li

01.08.2013 | Ausgabe 8/2013

Influence of steam injection and hot gas bypass on the performance and operation of a combined heat and power system using a recuperative cycle gas turbine

Soo Young Kang, Jeong Ho Kim, Tong Seop Kim

01.08.2013 | Ausgabe 8/2013

Modeling and numerical simulation of a pilot-stabilized turbulent premixed flame

Abdallah Benarous, Djamel Karmed, Abdelkrim Liazid

01.08.2013 | Ausgabe 8/2013

Performance and emission characteristics of conventional engine running on jatropha oil

B. P. Singh

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise