Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 8/2019

Ausgabe 8/2019

Inhaltsverzeichnis ( 48 Artikel )

01.08.2019 | Ausgabe 8/2019

Heat transfer characteristics of a short helical plate in a horizontal circular tube

Tae-Hyun Chang, Kwon-Soo Lee, Ki-Won Chang, Sang Min Kim, Chang-Hoan Lee

01.08.2019 | Ausgabe 8/2019

Numerical study on thermal stress cutting of silicon wafers using two-line laser beams

Sungho Choi, Kyung-Young Jhang

01.08.2019 | Ausgabe 8/2019

Effects of torsional vibration of a propulsion shafting system and energy efficiency design index from a system combining exhaust gas recirculation and turbocharger cut out

Yang Gon Kim, Ue Kan Kim

01.08.2019 | Ausgabe 8/2019

Dynamic fracture analysis for 2D multilayered glass structures considering interlayer effects

Youn Doh Ha

01.08.2019 | Ausgabe 8/2019

Nondestructive wire fault diagnosis using resistance spectroscopy analysis

Eunjoo Park, Namhun Kim, Seong-joon Kim, Daeil Kwon

01.08.2019 | Ausgabe 8/2019

Pretreatment methods to improve the kinematic viscosity of biodiesel for use in power tiller engines

Duk Gam Woo, Tae Han Kim

01.08.2019 | Ausgabe 8/2019

Reliability-based design optimization of a pick-up device of a manganese nodule pilot mining robot using the Coandă effect

Saekyeol Kim, Su-gil Cho, Minuk Lee, Jihoon Kim, Tae Hee Lee, Sanghyun Park, Sup Hong, Hyung-Woo Kim, Cheon-Hong Min, Jong-Su Choi, Young-Tak Ko, Sang-Bum Chi

01.08.2019 | Ausgabe 8/2019

Application of a phase-locked loop counterpulsation control algorithm to a pneumatic pulsatile VAD

Joon Yeong Kim, Seong Min Kang, Seong Wook Choi

01.08.2019 | Ausgabe 8/2019

Analysis and application of zeolite in microspeaker box

Yuan-Wu Jiang, Dan-Ping Xu, Joong-Hak Kwon, Zhi-Xiong Jiang, Jun-Hyung Kim, Sang-Moon Hwang

01.08.2019 | Ausgabe 8/2019

Development of hybrid loop heat pipe using pump assistance for cooling application on high heat flux device

Iwan Setyawan, Nandy Putra, Imansyah Ibnu Hakim, Ridho Irwansyah

01.08.2019 | Ausgabe 8/2019

Integrated process design of Al6061 alloy bolts for fastening offshore platforms

Sung-Cheol Park, Dong-Hoon Lee, Dae-Cheol Ko, Byung-Min Kim, Myoung-Hwan Kim, Kyung-Hun Lee

01.08.2019 | Ausgabe 8/2019

The effect of diluted hot oxidant and fuel on NO formation in oxy-fuel flameless combustion using opposite jet

Chun Loon Cha, Ho Yeon Lee, Sang Soon Hwang

01.08.2019 | Ausgabe 8/2019

An experiment analysis of MILD combustion with liquid fuel spray in a combustion vessel

Chun Loon Cha, Ho Yeon Lee, Sang Soon Hwang

01.08.2019 | Ausgabe 8/2019

Vibration energy harvesting technology for smart tire monitoring

Jongho Seo, Kyung-Young Jhang, Hanmin Lee, Young-Cheol Kim

01.08.2019 | Ausgabe 8/2019

Numerical investigation on NOX formation in oxygen-CH4 MILD combustion with air leakage

Ho-Yeon Lee, Chun-Loon Cha, Sang-Soon Hwang

01.08.2019 | Ausgabe 8/2019

A novel motorized bending apparatus for surgical plates

Seungbin Park, Jeonghwan Lee, Si-Myung Park, Gunwoo Noh, Jung-Woo Lee, Min Soo Park, Youngjun Kim

01.08.2019 | Ausgabe 8/2019

Bonding properties on diffusion bonding layer for micro PCD-WC tool fabrication

Uk-Su Kim, Seung-Sik Shin, Ki-Gwon Kim, Ba-Wi Jeong, Jeong-Woo Park

01.08.2019 | Ausgabe 8/2019

Fabrication of high-aspect-ratio micropatterns in soluble block-copolymer polyimides by a UV-assisted thermal imprint process

Sung-Won Youn, Kenta Suzuki, Hideki Takagi, Hiroshi Hiroshima, Yoshinori Kinoshita, Katsuhiro Hayashi

01.08.2019 | Ausgabe 8/2019

The effects of the compressibility of the subsonic flow on heat transfer characteristics in a microscale impinging slot jet

Seung-Ho Han, Hyun-Jin Park, Dae-Hee Lee

01.08.2019 | Ausgabe 8/2019

Combustion efficiency with a change in ignition plug type using a new plasma energy generator in a constant volume combustion chamber

Munseok Choe, Kwonse Kim, Dooseuk Choi

01.08.2019 | Ausgabe 8/2019

Analysis of the roll hunting force due to hardness in a hot rolling process

Hun Bong Lim, Hyun Ik Yang, Chang Wan Kim

01.08.2019 | Ausgabe 8/2019

Formability and forming force in incremental sheet forming of AA7075-T6 at different temperatures

Xiao Xiao, Chan-Il Kim, Xiao-Dong Lv, Tae-Seog Hwang, Young-Suk Kim

01.08.2019 | Ausgabe 8/2019

Injection mold design of reverse engineering using injection molding analysis and machine learning

Soonhwan Hwang, Jongsun Kim

01.08.2019 | Ausgabe 8/2019

Fall prediction of the elderly with a logistic regression model based on instrumented timed up & go

Jeongwoo Seo, Taeho Kim, Jinsoo Lee, Junggil Kim, Jinseung Choi, Gyerae Tack

01.08.2019 | Ausgabe 8/2019

Optimal rate for continuous phase modulation in standing surface acoustic waves

Chanryeol Rhyou, Sehyun Park, Hyungsuk Lee

01.08.2019 | Ausgabe 8/2019

Optimization of fire-related properties in layered structures

Won-Hee Park

01.08.2019 | Ausgabe 8/2019

Tube inlet orifice design of a once-through steam generator for flow stabilization

Hun Sik Han, Rayan Alshehri, Han-Ok Kang, Juhyeon Yoon, Young In Kim, Sang Ji Kim

01.08.2019 | Ausgabe 8/2019

Numerical analysis and simulation of an impulse driven piezoelectric needle-free jet injector

Mojiz Abbas Trimzi, Young-Bog Ham, Byeung-Cheol An, Jung-Ho Park, So-Nam Yun

01.08.2019 | Ausgabe 8/2019

Analysis of non-uniform flow distribution in parallel micro-channels

Jungchul Kim, Jeong Heon Shin, Sangho Sohn, Seok Ho Yoon

01.08.2019 | Ausgabe 8/2019

Development of covalent-bonded organic/carbon anode for sodium-ion battery

Hyunho Ha, Seunghoon Nam, Soo-Hwan Jeong, Seungmin Hyun

01.08.2019 | Ausgabe 8/2019

Aerodynamic design and optimization of a high-loaded axial fan stage using a curvature control method

Jieling Li, Huanlong Chen, Yang Liu, Junli Wang, Xianqing Yang

01.08.2019 | Ausgabe 8/2019

Proposal of a mathematical model for describing magnetorheological fluid dynamic behavior

Nafel Dogdu, Ibrahim Uslan, Sefaatdin Yuksel, Zekeriya Parlak

01.08.2019 | Ausgabe 8/2019

Numerical analysis of the dynamic behavior of a rotor-bearing-brush seal system with bristle interference

Yuan Wei, Shulin Liu

01.08.2019 | Ausgabe 8/2019

Compressive quasistatic and dynamic behavior of SiC/ZrO2 aluminum-based nanocomposite

Jamshid Nemati, Meysam Toosian, Seyed Shahin Banisdar, Seyed Mahdi Ahmadpour

01.08.2019 | Ausgabe 8/2019

A new method of enhancing heat transfer in sudden expansion channel using vortex generators with toe-out and toe-in configurations by acquiring perquisites of recirculation and secondary vortex flow

S. Ramanathan, M. R. Thansekhar, P. Rajesh Kanna, Prem Gunnasegaran

01.08.2019 | Ausgabe 8/2019

Fabrication of affordable pulse duplication system for the in-vitro cardiovascular experiments based on gear pump and orifice flowmeter

Ji-Woong Choi, Jae Hun Choe, Sung Yong Jung, Hanwook Park, Hojin Ha

01.08.2019 | Ausgabe 8/2019

Investigation and optimization of the internal cylindrical surface lapping process of 440c steel

Mohammad Shafiei Alavijeh, Hossein Amirabadi

01.08.2019 | Ausgabe 8/2019

Mesh stiffness analysis of beveloid gears for the rotating vector transmission

Yucheng Huang, Xuesong Du, Caichao Zhu, Gaoxiang Ni, Najeeb Ullah, Hao Liu

01.08.2019 | Ausgabe 8/2019

Optimal design to reduce torque ripple of IPM motor with radial based function meta-model considering design sensitivity analysis

Seunghyeon Cho, Dong-Chan Lee, Jongyoung Hwang, Kilju Kim, Gyeong Uk Jang, Daesung Bae, Hyung Soo Mok, Chang-Wan Kim

01.08.2019 | Ausgabe 8/2019

Prediction of bolt fastening state using structural vibration signals

Seong-Pil Jeong, Jung Woo Sohn

01.08.2019 | Ausgabe 8/2019

Characteristics analysis of the developed surface modification technologies to improve the anti-corrosion performances for offshore equipments

Jae-Won Oh, Jung-Yeul Jung, Kyounghwan Song, Youngsuk Nam, Ki-Young Sung, Seungtae Oh, Jaehwan Shim

01.08.2019 | Ausgabe 8/2019

Effect of pinless tool shoulder diameter on dieless friction stir extrusion joining of AA 5052-H32 and AA 6061-T6 aluminum alloy sheets

Tinu P. Saju, R. Ganesh Narayanan, Barnik Saha Roy

01.08.2019 | Ausgabe 8/2019

Experimental verification of the effect of human lower extremity exoskeleton

Yang Li, Cheng Xu, Xiaorong Guan, Zhong Li, Huibin Li

01.08.2019 | Ausgabe 8/2019

Effects of spiral start number and depth ratio of corrugated tube on flow and heat transfer characteristics in turbulent flow region

V. Kongkaitpaiboon, P. Promthaisong, V. Chuwattanakul, K. Wongcharee, S. Eiamsa-ard

01.08.2019 | Ausgabe 8/2019

Investigation of thermal performance of SAC variables using fuzzy logic based expert system

Suman Debnath, Jagannath Reddy, Jagadish, Biplab Das

01.08.2019 | Ausgabe 8/2019

Enhancement of steam condensation on titanium corrugated tubes under vacuum condition

Nae-Hyun Kim

01.08.2019 | Ausgabe 8/2019

Experimental and numerical investigation of heat transfer characteristics in a square channel with various truncated ribs

Jianying Gong, Xiong Zhang, Junxiong Zeng, Tieyu Gao, Weifeng Wu

01.08.2019 | Ausgabe 8/2019

Piezoelectric energy harvester utilizing mandibular deformation to power implantable biosystems: A feasibility study

Richard Fan, Soobum Lee, Hyunjun Jung, Mary Anne Melo, Radi Masri

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise