Ausgabe 7/2022
Inhalt (56 Artikel)
Simple preparation of ZIF-8 modified polyphenylene sulfide melt-blown film material and its organic dye removal performance
Yuhao Liu, Jieqi Wang, Liping Chen, Yong He
Comparative physicochemical characterization of ULTEM/SWCNT nanocomposites: Surface, thermal and electrical conductivity analyses
Volkan Ugraskan, Birol Isik, Ozlem Yazici, Fatih Cakar
Synthesis and assessment of poly(5-nitro-2-aminophenol) as a new scaling inhibitor to control the precipitation of CaCO3 and CaSO4 in solution
Hammed H. A. M. Hassan, Dalia E. Abd-El-Khalek, Marwa Abdel Fattah
Biodegradable blends of thermoplastic waxy starch and poly(ε-caprolactone) obtained by high shear extrusion: Rheological, mechanical, morphological and thermal properties
Anderson F. Manoel, Pedro I. C. Claro, Luiz H. C. Mattoso, Jose M. Marconcini, Gerson L. Mantovani
Effects of urea and glycerol mixture on morphology and molecular mobility in thermoplastic starch/montmorillonite-type nanofiller composites studied using XRD and NMR
Anton Baran, Oľga Fričová, Peter Vrábel, Ľuboš Popovič, Hamed Peidayesh, Ivan Chodák, Mária Hutníková, Mária Kovaľaková
Imidazole-modified polymers and their adsorption of salicylic acid from aqueous solution
Gui Chen, Xu Zeng, Jianhan Huang
Recent advances of chitosan-based polymers in biomedical applications and environmental protection
Sevda Fatullayeva, Dilgam Tagiyev, Nizami Zeynalov, Samira Mammadova, Elmira Aliyeva
One-pot multi-component synthesis of five substituted tetrahydropyridine derivatives promoted by a new natural-based biopolymeric catalyst as a green, reusable and eco-friendly heterogeneous catalyst
Mohammad Ali Karimi Zarchi, Karzem Behboodi, Bi Bi Fatemeh Mirjalili, Abdolahamid Bamoniri
Synthesis and characterization of modified cellulose nanofibril organosilica aerogels for the removal of anionic dye
Nathan Grishkewich, Yingzhan Li, Kimberly Liu, Kam Chiu Tam
Investigation on the crystallization behavior and detail spherulitic morphology of two crystal forms of thermoplastic polyurethanes
Feng Liu, Shaojie Li, Xia Liao, Qianyun Peng, Guangxian Li
Polypyrrole-functionalized g-C3N4 for rheological, combustion and self-healing properties of thermoplastic polyurethane
Shaolin Lu, Haixian Shi, Botao Shen, Wei Hong, Dingshan Yu, Xudong Chen
Biocompatible PLA/PCL blends nanocomposites doped with nanographite: Physico-chemical, and thermal behaviour
Ibrahim Nazem QADER, Mustafa Ersin PEKDEMİR, Meltem COŞKUN, Muhammed Sait KANCA, Mediha KÖK, Fethi DAĞDELEN
Retraction Note to: A fluorescent Zn(II)-containing coordination polymer for antibiotic sensing and treatment activity on periodontal tissue inflammation after orthodontics by inhibiting the growth of Porphyromonas gingivalis
Shuqiang Niu, Qianqian Zhang, Yanjun Zang, Fengchun Hou
Synergic effect of PVP and PEG hydrophilic additives on porous polyethersulfone (PES) membranes: preparation, characterization and biocompatibility
Athira V. B., Smita Mohanty, S. K. Nayak
Quaternised chitosan composites with in situ precipitated nano calcium phosphate for making bioactive and degradable tissue engineering scaffolds
R. K. Adarsh, Eva C. Das, Gopika V. Gopan, Remya K. Rajan, Manoj Komath
Influence of microwave power and HDPE blend ratio on thermal and mechanical properties of kenaf reinforced PLLA/HDPE blended composites
Manoj Kumar Singh, Sunny Zafar, Sanjay Mavinkere Rangappa, Suchart Siengchin
Structural, thermal, morphological and antibacterial activities of hybrid bio-nanocomposite Chitosan/Au/Bi2O3 for biomedical applications
Ahmad El Askary, Nasser S. Awwad, Hala A. Ibrahium, Moustapha Eid Moustapha, A. A. Menazea
Assessing the impact of membrane support and different amine monomer structures on the efficacy of thin-film composite nanofiltration membrane for dye/salt separation
Ping-Han Wu, Marwin R. Gallardo, Micah Belle Marie Yap Ang, Jeremiah C. Millare, Shu-Hsien Huang, Hui-An Tsai, Kueir-Rarn Lee
Experimental research on uniaxial tensile mechanical properties of Kapton foils
YAN Liu, YANZHEN Liu
PVDF/BaTiO3 composite foams with high content of β phase by thermally induced phase separation (TIPS)
Aleksandra Bužarovska, Mateja Kubin, Petre Makreski, Michele Zanoni, Leonardo Gasperini, Giacomo Selleri, Davide Fabiani, Chiara Gualandi
Glassy structure affected cold-crystallization behavior and structure of poly(lactic acid)
Chengbo Zhou, Yao Zhang, Cunliang Hu, Yanfeng Meng, Hongfei Li, Jingqing Li, Donghong Yu, Jesper de Claville Christiansen, Shichun Jiang
α-MoO3 nanobelts/CMC-PVA nanocomposites: hybrid materials for optoelectronic and dielectric applications
A. A. Al-Muntaser, Rami Adel Pashameah, Kamal Sharma, Eman Alzahrani, M. O. Farea, M. A. Morsi
Investigation on curing kinetics, water diffusion kinetics and thermo- mechanical properties of functionalized castor oil based epoxy copolymers
Sathyaraj Sankar lal, Sushanta K. Sahoo, Sekar Kannan
Synthesis of bovine serum albumin-gelatin composite adhesive hydrogels by physical crosslinking
Cuiping Guo, Zhiwen Zeng, Shan Yu, Jun Huang, Zhijie Geng, Dating Pei, Daohuan Lu
A novel crosslinked poly(AMPS-co-VA-co-DVB) viscosifier for high temperature water-based drilling muds
Haiyang Zhao, Yunpeng Geng, Lesly Dasilva Wandji Djouonkep, Jiantai Wen, Qiang Fan
Thermoset shape memory polymer with permanent shape reconfigurability based on dynamic disulfide bonds
Jingyi Ning, Lei Huang, Fuqi Zhao, Weiyu Zhu, Yunyun Yang, Fanhao Zeng, Chong Tian, Qiang Liu, Jiahao Lv, Meiling Cui, Xufu Cai, Weibo Kong
Enhanced thermal stability of biobased crosslinked poly (isobornylacrylate-co-2-ethylhexylacrylate) copolymers
Dounya Merah, Lamia Bedjaoui, Nouh Zeggai, Zohra Bouberka, Johan Sarazin, Donna Boutalbi, Ana Barrera, Hana Boughrara, Frédéric Dubois, Frédéric Cazaux, Philippe Supiot, Ulrich Maschke
The improvement of mechanical properties of repair and construction compositions based on epoxy resin with mineral fillers
Sergey Savotchenko, Ekaterina Kovaleva, Aleksei Cherniakov
Preparation of PHEMA/TiO2 nanocomposites by combination of in-situ polymerization/hydrothermal method and determination of their thermal, swelling, biological and dielectric properties
İbrahim Erol, Sedat Yurdakal, Kadir Demirelli, Zeki Gürler
Fatigue resistance and failure behavior of reaction compatibilized PC/ABS blends under tensile cyclic loading
Meng Ma, Chencheng Yu, Lei Bai, Si Chen, Yanqin Shi, Huiwen He, Wang Xu
The nucleation mechanism of 1-N',3-N'-dibenzoylbenzene-1,4-dicarbohydrazide as a nucleating agent for isotactic polypropylene
Hui Zhou, Jiao Xiang, Yan Li, Jin-Rong Zhong, Yue-Fei Zhang
Time and frequency domain dielectric spectroscopy for in-situ and ex-situ determination of amorphous fractions of isothermally cold-crystallized Polylactic acid
Evangelia E. Zavvou, Panagiotis C. Tsaousis, Aimilia A. Barmpaki, Ioannis Iliopoulos, Panagiota K. Karahaliou, Stavroula N. Georga, Christoforos A. Krontiras
Effect of starch initial moisture on thermoplastic starch film properties and its performance as agricultural mulch film
Matías Menossi, Florencia Salcedo, Julieta Capiel, Margarita Adler, Vera A. Alvarez, Leandro N. Ludueña
Ternary copolymerization photosensitive polyimide containing flexible group for liquid crystal alignment film
Mengyao Li, Yuanhao Xu, Xinjian Gong, Pengfei Geng, Zhenwei Gao, Jiaqiang Qin, Yinghan Wang, Pei Cheng
Comb like amphiphilic graft copolymers bearing PDMS and PEO side chains: synthesis and solvent assisted self-assembly behavior
K. Sunitha, Sankarapillai Mahesh, C. Suchithra, G. Unnikrishnan, C. P. Reghunadhan Nair
Kinetic Study on Thermal Degradation of Crosslinked Polyethylene Cable Waste
M. Alshrah, I. Adeyemi, I. Janajreh
Harnessing the gene delivery, anti-cancer and antimicrobial potential of polyethylene biguanides and their nanotized forms
Santosh Yadav, Diksha Jha, Hemant K. Gautam, Pradeep Kumar
Comparative analysis of 3D-printed polylactic acid and acrylonitrile butadiene styrene: Experimental and Materials-Studio-based theoretical studies
Dibli B. Otieno, Geoffrey O. Bosire, John M. Onyari, Julius M. Mwabora
Synthesis, optimization, characterization, and potential drug release application of nanocomposite hydrogel based on carboxymethyl cellulose-g-itaconic acid/acrylamide
Golnar Shekari, Maryam Kalantari, Hassan Hashemipour
Polyethylenimine polyampholytes: Synthesis, characterization and dye adsorption study
Sulbha Kumari, Mohd. Avais, Jyoti Devi Katiyar, Yogendra Kumar Suman, Subrata Chattopadhyay
Computational analysis on mechanical property reinforcement of nylon 6 polymer and nanofiller dispersion through addition of CNT/Graphene/CNT-Graphene nanofillers
Michael R. Roth, William A. Pisani, Dane N. Wedgeworth, John K. Newman, Manoj K. Shukla
Multiblock copolymers containing poly(butylene succinate) and poly(ε-caprolactone) blocks: Effect of block ratio and length on physical properties and biodegradability
Marijana Ponjavic, Sanja Jevtic, Marija S. Nikolic
Comparative experimental and modelling study of the thermal and thermo-mechanical properties of LLDPE/wax blends
Mafereka F. T. Mosoabisane, Adriaan S. Luyt, Cornelia G. C. E. van Sittert
Enhanced crystallization property and equilibrious mechanical properties of a novel self-assembly nucleating system based phosphate for polypropylene
Zhaopeng Deng, Chuangchuang Tong, Zhong Xin, Xin Meng, Min Fan, Weiguang Gong, Cheng Shu
Controlled release characteristics of methylenebisacrylamide crosslinked superabsorbent polymer for water and fertilizer conservation in agriculture sector
Dhanapal V, Subhapriya P, Sennappan M, Govindaraju K M
Polyaniline derivatized anion exchange membrane for acid recovery
Rajaram.K. Nagarale, Priyanka P. Bavdane, Sooraj Sreenath, Chetan M. Pawar, Vidhiben Dave, A. K. Satpati
Surface free energy study of virgin and recycled carbon fiber reinforced thermoplastic composites
Bruno Sena Maia, Mohini Sain, Jimi Tjong
Activated calcium silicate/natural rubber composites prepared via latex compounding: Static and dynamic mechanical properties
Weijiang Wang, Yinmin Zhang, Yongfeng Zhang, Junmin Sun
Properties of silica/natural rubber composite film and foam: Effects of silica content and sulfur vulcanization system
Napaporn Kumkrong, Peerapan Dittanet, Pongdhorn Saeoui, Surapich Loykulnant, Paweena Prapainainar
Synthesis and characterization of cationic acrylic resin used in cathodic electrodeposition coatings
Zheqing Gong, Wanting Zhao, Lijun Chen
Synthesis, optical and dielectric properties of polyacryloyloxy imino fluorophenyl acetamide and polyacryloyloxy imino fluorophenyl acetamide-co-polystyrene sulfonate
Rasha A. Baseer, Ewies F. Ewies, A. M. Ismail
Effects of incorporation of silanized titanium nitride on the electrochemical and mechanical properties of polyurethane in aircraft coating
Joseph Raj Xavier, Jeeva N
A novel polyaromatic ring phosphor-nitrogen imidazole derivative endowing epoxy resin with remarkable flame retardancy and mechanical properties
Wenhui Luo, Dingsi Li, Mingfeng Chen, Liping Su, Wei Zhong, Jiashui Lan, Botuo Zheng, Huagui Zhang
Determination of inline-particle sizes by turbidity measurement in high solid content emulsion polymerisations
Sören Rust, Werner Pauer
Tailoring molecular structure in the active layer of thin-film composite membrane for extreme pH condition
Yang Zhang, Ying Guo, Ying Wan, Guoyuan Pan, Hao Yu, Wenjie Du, Hongwei Shi, Muhua Zhao, Guoke Zhao, Changjiang Wu, Yiqun Liu