Skip to main content

Journal of Sol-Gel Science and Technology

Ausgabe 3/2021

Inhalt (17 Artikel)

Review Paper: Sol-gel and hybrid materials for biological and health (medical) applications

Fluorides-foundation for healthy teeth: a dental perspectives

Aiman Haider, Priyanka Khadatkar, S. Suresh, S. Arisutha, Sarika Verma

Original Paper: Characterization methods of sol-gel and hybrid materials

Multi-staged sol–gel synthesis of Mg doped ZnO/CuO core-shell heterojunction nanocomposite: dopant induced and interface growth response

Marina Marzuki, Nurafzarini Mohd. Rusdi, Mohd Zamzuri Mohammad Zain, Masanobu Izaki

Original Paper: Characterization methods of sol–gel and hybrid materials

Synthesis of the Zn1.9Cu0.1SiO4 pigment via the sol–gel and coprecipitation methods

Maria V. Rotermel, Rina F. Samigullina, Irina V. Ivanova, Elena V. Vladimirova, Inna V. Baklanova, Tatiana I. Krasnenko

Original Paper: Functional coatings, thin films and membranes (including deposition techniques)

Patterning of MgO epitaxial films on LaAlO3 substrate using photosensitive sol-gel method

Limin Li, Gaoyang Zhao, Li Lei, Chengshan Li

Original Paper: Functional coatings, thin films and membranes (including deposition techniques)

Synthesis and characterization of Mn:CdS nanoflower thin films prepared by hydrothermal method for photocatalytic activity

Selma M. H. AL-Jawad, Natheer Jamal Imran, Kahlaa H. Aboud

Original Paper: Functional coatings, thin films and membranes (including deposition techniques)

Preparation and characterization of planar heterojunction perovskite solar cells based on c-TiO2/CH3NH3PbI3/HTM/Ag structure

Jing Wu, Yuwen Wang, Chaoying Su, Hong Zhou, Huanyan Xu, Liguo Jin

Original Paper: Fundamentals of sol-gel and hybrid materials processing

Elucidation of efficient dual performance in photodegradation and antibacterial activity by a promising candidate Ni-doped MoO3 nanostructure

N. Rajiv Chandar, S. Agilan, R. Thangarasu, N. Muthukumarasamy, J. Chandrasekaran, S. Arunachalam, S. R. Akshaya

Original Paper: Industrial and technological applications of sol-gel and hybrid materials

Effect of silica/alumina ratio and structure-directing agent on the physical and chemical properties of SAPO-34

William Lima dos Anjos, Sergio Andres Villalba Morales, Natália Maira Braga Oliveira, Gustavo Paim Valença

Original Paper: Nano- and macroporous materials (aerogels, xerogels, cryogels, etc.)

Effects of precursor concentration on the physicochemical properties of ambient-pressure-dried MTES based aerogels with using pure water as the only solvent

Xi Deng, Liling Wu, Yunmeng Deng, Siqi Huang, Mengtian Sun, Xiaowu Wang, Qiong Liu, Ming Li, Zhi Li

Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.)

Ablation of Al2O3f/Al2O3 composites under an oxyacetylene torch flame

Wen Jin, Xiang Yang, Zhang Wen, Zhu Cheng-xin, Wang Yi, Peng Zhi-hang, Chen Xiao-na, Ma Yin-wei, Cao Feng, Cao Jian-hui

Original Paper: Sol-gel and hybrid materials for biological and health (medical) applications

Tailoring the structural, morphological, optical, cytotoxicity, and antibacterial properties of low temperature calcined nickel ferrite nanoparticles

M. G. Praveena, E. M. Mohammed

Original Paper: Sol–gel and hybrid materials for biological and health (medical) applications

Antibacterial wollastonite supported excellent proliferation and osteogenic differentiation of human bone marrow derived mesenchymal stromal cells

Senthil Kumar Venkatraman, Rajan Choudhary, Krishnamurithy Genasan, Malliga Raman Murali, Hanumantha Rao Balaji Raghavendran, Tunku Kamarul, Anushree Suresh, Jayanthi Abraham, Seshasailam Venkateswaran, Abel Livingston, Sasikumar Swamiappan

Open Access Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications

Piezoelectric properties of PZT by an ethylene glycol-based chemical solution synthesis

Ewout van der Veer, Beatriz Noheda, Mónica Acuautla

Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications

Recovery of Mn0.8Zn0.2Fe2O4 from Zn–C battery: auto-combustion synthesizes, characterization, and electromagnetic properties

M. A. Gabal, E. A. Al-Harthy, Y. M. Al Angari, A. Awad, A. A. Al-Juaid, A. M. Abdel-Daiem, Abdu Saeed

Original Paper: Sol-gel and hybrid materials for energy, environment and building applications

Chlorophyll-sensitized phenolic resins for the photocatalytic degradation of methylene blue and synthetic blue wastewater

Daniel Olivo-Alanís, Marina Montserrat Atilano-Camino, Alcione García-González, Luis Humberto-Álvarez, Refugio Bernardo García-Reyes

Original Paper: Sol-gel, hybrids and solution chemistries

Novel facile nonhydrolytic sol-gel synthesis of MgAl2O4 nanocrystal from bimetallic alkoxides

Feng Jiang, Guo Feng, Chujia Xu, Shao Qing, Qian Wu, Yun Yu, Quan Zhang, Weihui Jiang

Original Paper: : Sol-gel and hybrid materials for biological and health (medical) applications

Porous silica coated gold nanocages for chemo-photothermal combined therapy

Jun Hou, Yunyun Chen, Yanbao Zhao, Xueyan Zou, Lei Sun

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.