nach oben

Erschienen in:

2014 | OriginalPaper | Buchkapitel

10. Kinematics of Alternative Robotic Mechanical Systems

verfasst von : Jorge Angeles

Erschienen in: Fundamentals of Robotic Mechanical Systems

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The study of robotic mechanical systems has focused, so far, on serial manipulators. These are the most common systems of their kind, but nowadays by no means the majority. In recent years, other kinds of robotic mechanical systems have been developed, as outlined in Chap. 1. Under alternative robotic mechanical systems we understand here: (a) parallel robots; (b) multifingered hands; (c) walking machines; and (d) rolling robots. A class that is increasingly receiving attention, humanoids, portrays an architecture inspired from the human musculo-skeletal system. This class deserves a study on its own because of the host of control problems that it poses to the roboticist; its kinematics, however, can be studied with the tools developed in this chapter for the first three kinds of systems listed above. For this reason, a section on humanoids is not included here.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Geometry of General Serial Robots

Nächstes Kapitel Trajectory Planning: Continuous-Path Operations

Since all vectors in the 15 coefficients of interest are coplanar, they are regarded as two-dimensional vectors in the display of the 15 coefficients.

Charentus, S. and Renaud, M., 1989, Calcul du modèle géometrique directe de la plate-forme de Stewart, LAAS Report # 89260, Laboratoire d’Automatique et d’Analyse de Systèmes, Toulouse.

De Luca, A. and Oriolo, G., 1995, “Modelling and control of nonholonomic mechanical systems”, in Angeles, J. and Kecskeméthy, A. (editors), Kinematics and Dynamics of Multi-Body Systems, Springer-Verlag, New York, pp. 277–342.CrossRef

Dietmaier, P., 1998, “The Stewart-Gough platform of general geometry can have 40 real postures”, Proc. Sixth International Workshop on Advances in Robot Kinematics, Kluwer Academic Publishers, Dordrecht, pp. 7–16.

Golub, G.H. and Van Loan, C.F., 1989, Matrix Computations, The Johns Hopkins University Press, Baltimore.MATH

Gosselin, C.M., Sefrioui, J., and Richard, M.J., 1992, “Solutions polynomiales au problème de la cinématique directe des manipulateurs parallèles plans à trois degrés de liberté”, Mechanism and Machine Theory 27, no. 2, pp. 107–119.CrossRef

Gosselin, C.M., Sefrioui, J., and Richard, M.J., 1994a, “On the direct kinematics of spherical three-degree-of-freedom parallel manipulators with a coplanar platform”, ASME J. Mechanical Design 116, pp. 587–593.CrossRef

Gosselin, C.M., Sefrioui, J., and Richard, M.J., 1994b, “On the direct kinematics of spherical three-degree-of-freedom parallel manipulators of general architecture”, ASME J. Mechanical Design 116, pp. 594–598.CrossRef

Gosselin, C.M., Perreault, L., and Vaillancourt, C., 1995, “Simulation and computer-aided kinematic design of three-degree-of-freedom spherical parallel manipulators”, J. Robotic Systems 12, no. 12, pp. 857–869.CrossRefMATH

Gough, V.M., 1956–1957, “Communications”, Proc. Automobile Division of The Institution of Mechanical Engineers, pp. 166–168. See also “Discussion in London”, Proc. Automobile Division of The Institution of Mechanical Engineers, pp. 392–394.

Hillier, F.S. and Lieberman, G.J., 1995, Introduction to Mathematical Programming, McGraw-Hill, New York.MATH

Husty, M. L., 1996, “An algorithm for solving the direct kinematics of general Stewart-Gough platforms”, Mechanism and Machine Theory 31, no. 4, pp. 365–380.CrossRef

Lazard, D. and Merlet, J.-P., 1994, “The (true) Stewart platform has 12 configurations”, Proc. IEEE Int. Conf. on Robotics & Automation, San Diego, pp. 2160–2165.

Lee, H.Y. and Roth, B., 1993, “A closed-form solution of the forward displacement analysis of a class of in-parallel mechanisms”, Proc. IEEE Int. Conf. on Robotics & Automation, Atlanta, pp. 720–731.

Menitto, G. and Buehler, M., 1996, “CARL: A compliant articulated robotic leg for dynamic locomotion”, Robotics and Autonomous Systems 18, pp. 337–344.CrossRef

Merlet, J.-P., 1989, “Singular Configurations of Parallel Manipulators and Grassmann Geometry”, The Int. J. Robotics Res. 8, no. 5, pp. 45–56.CrossRef

Merlet, J.-P., 2006, Parallel Robots, Second Edition, Springer, Dordrecht.MATH

Nanua, P., Waldron, K.J., and Murthy, V., 1990, “Direct kinematic solution of a Stewart platform”, IEEE Trans. Robotics & Automation 6, pp. 438–444.CrossRef

Ostrovskaya, S. and Angeles, J., 1998, “Nonholonomic systems revisited within the framework of analytical mechanics”, Applied Mechanics Reviews, vol. 51, No. 7, pp. 415–433.CrossRef

Raghavan, M., 1993, “The Stewart platform of general geometry has 40 configurations”, ASME J. Mechanical Design 115, pp. 277–282.CrossRef

Reynaerts, D., 1995, Control Methods and Actuation Technology for Whole-Hand Dextrous Manipulation, doctoral dissertation, Fakulteit der Torgepaste Wetenschappen, Katholieke Universiteit Leuven, Leuven.

Stewart, D., 1965, “A platform with 6 degrees of freedom”, Proc. Institution of Mechanical Engineers 180, part 1, no. 15, pp. 371–386.

Teichmann, M., 1995, Grasping and Fixturing: A Geometric Study and Implementation, Ph.D. thesis, Department of Computer Science, New York University, New York.

Van Brussel, H., Santoso, B., and Reynaerts, D., 1989, “Design and control of a multi-fingered robot hand provided with tactile feedback”, Proc. NASA Conf. Space Telerobotics, Pasadena, Jan.31–Feb.2, vol. III, pp. 89–101.

Wampler, C., 1996, “Forward displacement analysis of general six-in-parallel SPS (Stewart) platform manipulators using soma coordinates”, Mechanism and Machine Theory 31, no. 3, pp. 331–337.CrossRef

West, M. and Asada, H., 1995, “Design and control of ball wheel omnidirectional vehicles”, Proc. IEEE Int. Conf. on Robotics & Automation, Nagoya, pp. 1931–1938.

Titel: Kinematics of Alternative Robotic Mechanical Systems
verfasst von: Jorge Angeles
Verlag: Springer International Publishing
Buch: Fundamentals of Robotic Mechanical Systems
Print ISBN: 978-3-319-01850-8

Electronic ISBN: 978-3-319-01851-5

Copyright-Jahr: 2014
DOI: https://doi.org/10.1007/978-3-319-01851-5_10

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht